VAR-SOM-MX8M-NANO Release Notes: Difference between revisions
From Variscite Wiki
No edit summary |
(VAR-SOM-MX8M-NANO: Add support for Debian Bookworm based on Yocto 6.1.36-2.1.0) |
||
(81 intermediate revisions by 10 users not shown) | |||
Line 1: | Line 1: | ||
<!-- | <!-- | ||
--> {{ | --> {{INIT_RELEASE_PARAM|RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO}}<!-- | ||
--> {{#lst:Release_Notes_Template|Release_Notes_Header}} <!-- Include common release notes template | |||
--> {{#lst:Release_Notes_Template|Release_Notes_Header}} <!-- | |||
Instructions: Add a new change log section below for each release | Instructions: Add a new change log section below for each release | ||
Line 164: | Line 163: | ||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | | Added support for VAR-SOM-MX8M-NANO revision 1.3 || | ||
|- | |- | ||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO | | Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | ||
Line 186: | Line 185: | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8M-NANO/><!-- | </includeonly><section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8M-NANO/><!-- | ||
--><section begin=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO || | |||
|- | |||
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| kernel: ads7846: fix the pressure_max setting || | |||
|- | |||
| mx8_install_android.sh: imx8mn-var-som: update board identification || | |||
|- | |||
| sepolicy: Fix for WiFi upon resume from suspend || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Nano || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.1/><!-- | |||
--><section begin=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Nano || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR_SOM-MX8M-NANO_V1.0/><!-- | |||
--><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO/><includeonly> | --><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO/><includeonly> | ||
Line 236: | Line 282: | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO_V1.3/><!-- | </includeonly><section end=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO_V1.3/><!-- | ||
--><section begin=RELEASE_P9.0.0_2.3.4_GA_VAR-SOM-MX8M-NANO/><includeonly> | --><section begin=RELEASE_P9.0.0_2.3.4_GA_VAR-SOM-MX8M-NANO/><includeonly> | ||
Line 261: | Line 308: | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>|| | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span>|| | ||
|- | |- | ||
| ''' Linux | | ''' Linux kernel updates:''' || | ||
|- | |- | ||
| MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group || | | MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group || | ||
Line 267: | Line 314: | ||
| Correct ldo1/ldo2 voltage on VAR-SOM-MX8M-NANO || Based on MLK-23275-2 by NXP | | Correct ldo1/ldo2 voltage on VAR-SOM-MX8M-NANO || Based on MLK-23275-2 by NXP | ||
|- | |- | ||
| '''Debian | | '''Debian build updates:''' || | ||
|- | |- | ||
| Debian build script: Added loop device support for SD card image creation || | | Debian build script: Added loop device support for SD card image creation || | ||
Line 291: | Line 338: | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8M-NANO/><!-- | |}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8M-NANO/><!-- | ||
--><section begin=RELEASE_BULLSEYE_V2. | --><section begin=RELEASE_BULLSEYE_5.4.142_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | ||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| ''' Linux kernel updates:''' || | |||
|- | |||
| Updated to version 5.4.142 || | |||
|- | |||
| imx8_var_defconfig: enable driver for ADIN PHY || | |||
|- | |||
| imx8mn-var-som: update the polarity of camera reset GPIO || | |||
|- | |||
| imx8_var_defconfig: add full docker support || | |||
|- | |||
| gpio: pca953x: Introduce standard-regs-fallback property || | |||
|- | |||
| gpio: pca953x: Introduce support for nxp,pcal6408 || | |||
|- | |||
| ARM: configs: Variscite: update to latest docker requirements || | |||
|- | |||
| sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| '''U-Boot updates:''' || | |||
|- | |||
| imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY || | |||
|- | |||
| variscite: imx8_eeprom: align eeprom features to SoM families || | |||
|- | |||
| imx8: ahab: Only compile ahab.c for u-boot || | |||
|- | |||
| ahab: Make authenticate_os_container static || | |||
|- | |||
| imx8mn-var-som: Move CONFIG_CSF_SIZE to imx8mn_var_som_defconfig || | |||
|- | |||
| '''Debian build updates:''' || | |||
|- | |||
| imx8mn-var-som: Fix weston package selection || | |||
|- | |||
| weston_rootfs.sh: Fix cleanup on header-stage || | |||
|- | |||
| imx8mn-var-som: Update Debian snapshot to latest || | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_5.4.142_V1.0_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_BULLSEYE_V2.1_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! Change List !! Description | ! Change List !! Description | ||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> || | |||
|- | |||
| ''' Linux kernel updates:''' || | |||
|- | |||
| ARM: configs: Variscite: disable EVBUG module || | |||
|- | |||
| ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs || | |||
|- | |||
| ASoC: wm8904: add DMIC support || | |||
|- | |||
| ASoC: wm8904: extend device tree support || | |||
|- | |||
| '''U-Boot updates:''' || | |||
|- | |||
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot || | |||
|- | |||
| imx8mn-var-som: Recognize VAR-SOM-MX8M-NANO revisions 1.2 and 1.3 || | |||
|- | |||
| '''Debian build updates:''' || | |||
|- | |||
| Support for FreeRTOS - Cortex - M7 compilation || | |||
|- | |||
| Add libgpiod and libgpiod tools || | |||
|- | |||
| Align gstreamer package to latest dunfell || | |||
|- | |||
| Update execstack and package dependencies || | |||
|- | |||
| Bug fixes for gstreamer packages || | |||
|- | |||
| Update Debian Packages to latest stable snapshot || | |||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> || | | <span {{#var:STYLE_RELEASE}}>Release 2.0</span> || | ||
|- | |- | ||
| Debian Bullseye release with Linux kernel 5.4.85 || All relevant VAR-SOM-MX8M-NANO packages updated to match Yocto Dunfell | | Debian Bullseye release with Linux kernel 5.4.85 || All relevant VAR-SOM-MX8M-NANO packages were updated to match Yocto Dunfell | ||
|- | |- | ||
| | | ''' Linux kernel updates:''' || | ||
|- | |- | ||
| | | Upgraded to kernel version 5.4.85 || | ||
|- | |- | ||
| | | Added support for VAR-SOM-MX8M-NANO revision 1.3 || | ||
|- | |- | ||
| | | Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | ||
|- | |- | ||
| | | '''U-Boot updates:''' || | ||
|- | |||
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch || | |||
|- | |- | ||
| | | '''Debian build updates:''' || | ||
|- | |- | ||
| | | Clean-up /tmp in the rootfs after building the Linux kernel headers package || | ||
|- | |- | ||
| | | Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia || | ||
|- | |- | ||
| imx- | | Updated imx-firmware version to 8.8 || | ||
|- | |- | ||
| | | imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch || | ||
|- | |- | ||
| | | imx-mkimage: Update patch to align to Yocto Dunfell || | ||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.1_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_BULLSEYE_V2.0_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> || | |||
|- | |||
| Debian Bullseye release with Linux kernel 5.4.85 || All relevant VAR-SOM-MX8M-NANO packages were updated to match Yocto Dunfell | |||
|- | |||
| ''' Linux kernel updates:''' || | |||
|- | |||
| Upgraded to kernel version 5.4.85 || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | |||
|- | |||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | |||
|- | |- | ||
| '''U-Boot updates:''' || | | '''U-Boot updates:''' || | ||
|- | |- | ||
| | | Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch || | ||
|- | |||
| '''Debian build updates:''' || | |||
|- | |||
| Clean-up /tmp in the rootfs after building the Linux kernel headers package || | |||
|- | |||
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia || | |||
|- | |||
| Updated imx-firmware version to 8.8 || | |||
|- | |||
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch || | |||
|- | |||
| imx-mkimage: Update patch to align to Yocto Dunfell || | |||
|- | |- | ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.0_VAR-SOM-MX8M-NANO/><!-- | |}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.0_VAR-SOM-MX8M-NANO/><!-- | ||
--><section begin=mx8mn-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:DPC_VAR-SOM-MX8M-NANO|RN_mx8mn-debian-bookworm-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-debian-bookworm-6.1.36_2.1.0-v1.0/><!-- | |||
--><section begin=MCUXPRESSO_2.7.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | --><section begin=MCUXPRESSO_2.7.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | ||
Line 376: | Line 541: | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8M-NANO/><!-- | </includeonly><section end=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8M-NANO/><!-- | ||
--><section begin=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | --><section begin=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | ||
Line 401: | Line 565: | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><!-- | </includeonly><section end=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8M-NANO/><!-- | ||
--><section begin=MCUXPRESSO_2.10.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.10.0 release for Cortex-M7 core of VAR-SOM-MX8M-NANO | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|- | |||
| RPMSG | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=MCUXPRESSO_2.11.1_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.11.1 release for Cortex-M7 core of VAR-SOM-MX8M-NANO | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|- | |||
| RPMSG | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=MCUXPRESSO_2.12.1_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.12.1 release for Cortex-M7 core of VAR-SOM-MX8M-NANO | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|- | |||
| ECSPI1 | |||
|- | |||
| RPMSG | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=MCUXPRESSO_2.13.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.13.0 release for Cortex-M7 core of VAR-SOM-MX8M-NANO | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|- | |||
| ECSPI1 | |||
|- | |||
| RPMSG | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=MCUXPRESSO_2.15.0_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial FreeRTOS 2.15.0 release for Cortex-M7 core of VAR-SOM-MX8M-NANO | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| GPIO/LED | |||
|- | |||
| I2C4 | |||
|- | |||
| PWM3 | |||
|- | |||
| UART3 | |||
|- | |||
| ECSPI1 | |||
|- | |||
| RPMSG | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO_V1.4/><includeonly> | --><section begin=RELEASE_10.0.0_2.3.0_GA_VAR_SOM-MX8M-NANO_V1.4/><includeonly> | ||
Line 411: | Line 701: | ||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | | Added support for VAR-SOM-MX8M-NANO revision 1.3 || | ||
|- | |- | ||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO | | Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | ||
Line 454: | Line 744: | ||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | | Added support for VAR-SOM-MX8M-NANO revision 1.3 || | ||
|- | |- | ||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO | | Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | ||
Line 497: | Line 787: | ||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | | Added support for VAR-SOM-MX8M-NANO revision 1.3 || | ||
|- | |- | ||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO | | Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | ||
Line 519: | Line 809: | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8M-NANO/><!-- | </includeonly><section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8M-NANO/><!-- | ||
--><section begin=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List || Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
|psplash: switch to using png images for logo and bar || | |||
|- | |||
|pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | |||
|- | |||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Upgraded to kernel version 5.4.85 || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A || | |||
|- | |||
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 || | |||
|- | |||
| Fixed occasional pulseaudio device initialization problems || | |||
|- | |||
| Re-added packages available in previous Yocto releases || | |||
|- | |||
| Added Jailhouse support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List || Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> || | |||
|- | |||
| Updated the kernel version from 5.4.85 to 5.4.142 | |||
|- | |||
| Update Yocto meta layers to latest: | |||
yocto/poky | |||
yocto/meta-freescale | |||
oe/meta-openembedded | |||
oe/meta-python2 | |||
freescale/meta-freescale-3rdparty | |||
freescale/meta-freescale-distro | |||
freescale/Documentation | |||
QT5/meta-qt5 | |||
sbabic/meta-swupdate | |||
yocto/meta-virtualization | |||
varigit/meta-variscite-fslc | |||
|- | |||
| linux-firmware: update TI WL18xx BT service pack to v4.7 | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 | |||
|- | |||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
|psplash: switch to using png images for logo and bar || | |||
|- | |||
|pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | |||
|- | |||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Upgraded to kernel version 5.4.85 || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A || | |||
|- | |||
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 || | |||
|- | |||
| Fixed occasional pulseaudio device initialization problems || | |||
|- | |||
| Re-added packages available in previous Yocto releases || | |||
|- | |||
| Added Jailhouse support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.6_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List || Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | |||
|- | |||
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq || | |||
|- | |||
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO || | |||
|- | |||
| kernel: imx8_var_defconfig: add full docker support || | |||
|- | |||
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| kernel: ads7846: fix the pressure_max setting || | |||
|- | |||
| kernel: sn65dsi83: allow swapping LVDS Channel A/B || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> || | |||
|- | |||
| Updated the kernel version from 5.4.85 to 5.4.142 || | |||
|- | |||
| Update Yocto meta layers to latest: | |||
yocto/poky | |||
yocto/meta-freescale | |||
oe/meta-openembedded | |||
oe/meta-python2 | |||
freescale/meta-freescale-3rdparty | |||
freescale/meta-freescale-distro | |||
freescale/Documentation | |||
QT5/meta-qt5 | |||
sbabic/meta-swupdate | |||
yocto/meta-virtualization | |||
varigit/meta-variscite-fslc || | |||
|- | |||
| linux-firmware: update TI WL18xx BT service pack to v4.7 || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
|psplash: switch to using png images for logo and bar || | |||
|- | |||
|pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | |||
|- | |||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Upgraded to kernel version 5.4.85 || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A || | |||
|- | |||
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 || | |||
|- | |||
| Fixed occasional pulseaudio device initialization problems || | |||
|- | |||
| Re-added packages available in previous Yocto releases || | |||
|- | |||
| Added Jailhouse support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.6_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.7_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List || Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> || | |||
|- | |||
| U-Boot: imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY || | |||
|- | |||
| kernel: MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support || | |||
|- | |||
| kernel: imx8_var_defconfig: enable driver for ADIN PHY || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | |||
|- | |||
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq || | |||
|- | |||
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO || | |||
|- | |||
| kernel: imx8_var_defconfig: add full docker support || | |||
|- | |||
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| kernel: ads7846: fix the pressure_max setting || | |||
|- | |||
| kernel: sn65dsi83: allow swapping LVDS Channel A/B || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> || | |||
|- | |||
| Updated the kernel version from 5.4.85 to 5.4.142 || | |||
|- | |||
| Update Yocto meta layers to latest: | |||
yocto/poky | |||
yocto/meta-freescale | |||
oe/meta-openembedded | |||
oe/meta-python2 | |||
freescale/meta-freescale-3rdparty | |||
freescale/meta-freescale-distro | |||
freescale/Documentation | |||
QT5/meta-qt5 | |||
sbabic/meta-swupdate | |||
yocto/meta-virtualization | |||
varigit/meta-variscite-fslc || | |||
|- | |||
| linux-firmware: update TI WL18xx BT service pack to v4.7 || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
|psplash: switch to using png images for logo and bar || | |||
|- | |||
|pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | |||
|- | |||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Upgraded to kernel version 5.4.85 || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A || | |||
|- | |||
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 || | |||
|- | |||
| Fixed occasional pulseaudio device initialization problems || | |||
|- | |||
| Re-added packages available in previous Yocto releases || | |||
|- | |||
| Added Jailhouse support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.7_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.8_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List || Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.8</span> || | |||
|- | |||
| U-Boot: variscite: eth: ADIN1300: Disable RGMII RX clock delay || | |||
|- | |||
| kernel: imx8mn-var-som: fec: add 20ms phy-reset-post-delay || | |||
|- | |||
| kernel: net: phy: adin: add adi,phy-mode-override property || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> || | |||
|- | |||
| U-Boot: imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY || | |||
|- | |||
| kernel: MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support || | |||
|- | |||
| kernel: imx8_var_defconfig: enable driver for ADIN PHY || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | |||
|- | |||
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq || | |||
|- | |||
| kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO || | |||
|- | |||
| kernel: imx8_var_defconfig: add full docker support || | |||
|- | |||
| kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| kernel: ads7846: fix the pressure_max setting || | |||
|- | |||
| kernel: sn65dsi83: allow swapping LVDS Channel A/B || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> || | |||
|- | |||
| Updated the kernel version from 5.4.85 to 5.4.142 || | |||
|- | |||
| Update Yocto meta layers to latest: | |||
yocto/poky | |||
yocto/meta-freescale | |||
oe/meta-openembedded | |||
oe/meta-python2 | |||
freescale/meta-freescale-3rdparty | |||
freescale/meta-freescale-distro | |||
freescale/Documentation | |||
QT5/meta-qt5 | |||
sbabic/meta-swupdate | |||
yocto/meta-virtualization | |||
varigit/meta-variscite-fslc || | |||
|- | |||
| linux-firmware: update TI WL18xx BT service pack to v4.7 || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
|psplash: switch to using png images for logo and bar || | |||
|- | |||
|pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO revision 1.3 || | |||
|- | |||
| Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]] | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Upgraded to kernel version 5.4.85 || | |||
|- | |||
| Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A || | |||
|- | |||
| Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 || | |||
|- | |||
| Fixed occasional pulseaudio device initialization problems || | |||
|- | |||
| Re-added packages available in previous Yocto releases || | |||
|- | |||
| Added Jailhouse support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.8_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0/><!-- | |||
--><section begin=mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0/><!-- | |||
--><section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!-- | |||
--><section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1}} | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!-- | |||
--><section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2}} | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1}} | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!-- | |||
--><section begin=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0/><!-- | |||
--><section begin=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1}} | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1/><!-- | |||
--><section begin=mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8M-NANO|RN_mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0/><!-- | |||
--><section begin=mx8mn-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_VAR-SOM-MX8M-NANO|RN_mx8mn-b2qt-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!-- | |||
--><section begin=mx8mn-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_VAR-SOM-MX8M-NANO|RN_mx8mn-b2qt-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-b2qt-kirkstone-5.15-2.0.x-v1.0/><!-- | |||
--><section begin=RELEASE_DUNFELL_B2QT_V1.2_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List || Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''meta-variscite-boot2qt''' || | |||
|- | |||
| Handle github dropping git:// support || | |||
|- | |||
| '''U-Boot''' || | |||
|- | |||
|imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY || | |||
|- | |||
| '''Linux''' || | |||
|- | |||
|MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support || | |||
|- | |||
| imx8_var_defconfig: enable driver for ADIN PHY || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''meta-variscite-boot2qt''' || | |||
|- | |||
| Update to Qt 6.0.4 || | |||
|- | |||
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools || | |||
|- | |||
| '''meta-variscite-fslc''' || | |||
|- | |||
| freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| '''Linux''' || | |||
|- | |||
| imx8mn-var-som: update the polarity of OV5640 camera reset GPIO || | |||
|- | |||
| imx8_var_defconfig: add full docker support || | |||
|- | |||
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| ads7846: fix the pressure_max setting || | |||
|- | |||
| sn65dsi83: allow swapping LVDS Channel A/B || | |||
|- | |||
| Updated the kernel version from 5.4.85 to 5.4.142 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| First Release || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.2_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List || Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''meta-variscite-boot2qt''' || | |||
|- | |||
| Update to Qt 6.0.4 || | |||
|- | |||
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools || | |||
|- | |||
| '''meta-variscite-fslc''' || | |||
|- | |||
| freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| '''Linux''' || | |||
|- | |||
| imx8mn-var-som: update the polarity of OV5640 camera reset GPIO || | |||
|- | |||
| imx8_var_defconfig: add full docker support || | |||
|- | |||
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A | |||
|- | |||
| ads7846: fix the pressure_max setting || | |||
|- | |||
| sn65dsi83: allow swapping LVDS Channel A/B || | |||
|- | |||
| Updated the kernel version from 5.4.85 to 5.4.142 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| First Release || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8M-NANO/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| First Release | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8M-NANO/><!-- | |||
--><section begin=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Nano || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| The maximum camera resolution in this release is 720p || | |||
|- | |||
| Cortex-M7 || Running Ping pong example leads to kernel crash | |||
|- | |||
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.0/><!-- | |||
--><section begin=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Add delay to detect ADIN PHY || | |||
|- | |||
|'''Linux updates''' || | |||
|- | |||
| Enable ADIN PHY support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Nano || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| The maximum camera resolution in this release is 720p || | |||
|- | |||
| Cortex-M7 || Running Ping pong example leads to kernel crash | |||
|- | |||
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.1/><!-- | |||
--><section begin=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| net: drop common board_phy_config || | |||
|- | |||
| imx8mn-var-som: Enable CONFIG_PHY_ADIN || | |||
|- | |||
| phy: adin: add driver for Analog Devices ADIN1300 PHY || | |||
|- | |||
| Revert "net: Introduce a delay before searching for phy address." || | |||
|- | |||
|'''Linux updates''' || | |||
|- | |||
| imx8mn-var-som: fec: add 20ms phy-reset-post-delay || Without a delay, the generic phy driver may be incorrectly used for adin1300 under some conditions. | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Add delay to detect ADIN PHY || | |||
|- | |||
|'''Linux updates''' || | |||
|- | |||
| Enable ADIN PHY support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Nano || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| The maximum camera resolution in this release is 720p || | |||
|- | |||
| Cortex-M7 || Running Ping pong example leads to kernel crash | |||
|- | |||
| WiFi Hotspot and WiFi client can't be used together|| It is a WiFi module limitation | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_2.6.0_VAR_SOM-MX8M-NANO_V1.2/><!-- | |||
--><section begin=mx8mn-android-12.0.0_2.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:APC_VAR-SOM-MX8M-NANO|RN_mx8mn-android-12.0.0_2.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-android-12.0.0_2.0.0-v1.0/><!-- | |||
--><section begin=mx8mn-android-12.0.0_2.0.0-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:APC_VAR-SOM-MX8M-NANO|RN_mx8mn-android-12.0.0_2.0.0-v1.1}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-android-12.0.0_2.0.0-v1.1/><!-- | |||
--><section begin=mx8mn-android-14.0.0_1.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:APC_VAR-SOM-MX8M-NANO|RN_mx8mn-android-14.0.0_1.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mn-android-14.0.0_1.0.0-v1.0/><!-- |
Latest revision as of 21:43, 12 July 2024
Warning: This page is designed to be used with a 'release' URL parameter.
This page is using the default release RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO.
To view this page for a specific Variscite SoM and software release, please follow these steps:
- Visit variwiki.com
- Select your SoM
- Select the software release
VAR-SOM-MX8M-NANO
Release Notes
Yocto zeus-fsl-5.4.24-mx8mn-v2.0
Release Notes
Based on release | Yocto: Poky 3.0, BSP: NXP L5.4.24_2.1.0, Linux: imx_5.4.24_2.1.0 |
Release tag | zeus-fsl-5.4.24-mx8mn-v2.0 |
Release manifest | imx-5.4.24-2.1.0-var01.xml |
Date | 9/8/2020 |
Supported platforms | VAR-SOM-MX8M-NANO |
SOM revision | v1.1 and higher |
File System build system | Yocto Zeus |
Recovery SD card link | var-som-mx8mn-recovery-sd.v30.img.gz |
Relevant git Repositories
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Change List |
---|
Release 2.0 |
Initial Yocto Zeus with kernel 5.4.24 release for VAR-SOM-MX8M-NANO |