VAR-SOM-MX8 Release Notes: Difference between revisions

From Variscite Wiki
No edit summary
(VAR-SOM-MX8: Mickledore 6.1.36-2.1.0 v1.0)
 
(83 intermediate revisions by 9 users not shown)
Line 6: Line 6:
Instructions: Add a new change log section below for each release
Instructions: Add a new change log section below for each release


-->
--><section begin=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Added support for loading the M4 firmware using the Linux Remoteproc Framework ||
|-
| Added support for loading the M4 firmware using U-Boot ||
|-
| Disabled audiomix ||
|-
| Fixed SPI dma issue ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8/><!--


<section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 117: Line 143:
| Added Android support for SPEAR-MX8 ||  
| Added Android support for SPEAR-MX8 ||  
|-  
|-  
| Fixed capacitive touch interrupt for VAR-SOM-MX8 || Fixes capacitive touch on Symphony board v1.2, backwards compatible with older Symphony revisions  
| Fixed capacitive touch interrupt for VAR-SOM-MX8 || Fixes capacitive touch on Symphony-Board v1.2, backwards compatible with older Symphony-Board revisions  
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||  
Line 297: Line 323:
|-  
|-  
| Initial Debian Buster release with Docker support || Support for VAR-SOM-MX8 and SPEAR-MX8  
| Initial Debian Buster release with Docker support || Support for VAR-SOM-MX8 and SPEAR-MX8  
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_BUSTER_V1.2_VAR-SOM-MX8/><!--
--><section begin=mx8-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_VAR-SOM-MX8|RN_mx8-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_VAR-SOM-MX8|RN_mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=mx8-b2qt-dunfell-5.4-2.1.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List
{{#lst:B2QT_VAR-SOM-MX8|RN_mx8-b2qt-dunfell-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-b2qt-dunfell-5.4-2.1.x-v1.2/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|'''U-Boot'''
|-
|imx8qm-var-som: Introduce support for the i.MX8QP SoC
|-
|imx8qm-var-som: Provide som_wifi kernel argument
|-
|imx8: ahab: Only compile ahab.c for u-boot
|-
|imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot
|-
|'''Kernel'''
|-
|Update kernel from version 5.4.85 to 5.4.142
|-
|imx8_var_defconfig: add full docker support
|-
|imx8qm-var-som: Introduce support for the i.MX8QP SoC
|-
|imx8qm-var-som: enable internal pullups for i2c0, i2c1, i2c3, i2c4
|-
|Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting"
|-
|sn65dsi83: Add device tree property to swap LVDS Channel A/B
|-
|imx8qm-var-spear: Adjust usb hsic pad settings
|-
|ARM: configs: Variscite: Enable USB_HSIC_USB3053
|-
|ARM: configs: Variscite: disable EVBUG module
|-
|ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs
|-
|ASoC: wm8904: extend device tree support
|-
|'''meta-variscite-boot2qt'''
|-
|Update Qt from version 6.0.3 to 6.0.4
|-
|manifest: meta-variscite-fslc: Update to latest
|-
|b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools
|-
|b2qt-embedded-qt5-image: allow disabling virtual terminals
|-
|Variscite: mask linux-firmware bbappend in meta-boot2qt-distro
|-
|Merge branch '6.0' into dunfell-var01
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| First Release
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| First Release
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8/><!--
--><section begin=RELEASE_SUMO_B2QT_V1.1_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| VAR-SOM-MX8: Added support for Symphony-Board revision 1.3A || Added internal RX delay for Ethernet PHY on Symphony-Board
|-
| Upgraded to Qt 5.12.9 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| First release ||
|}  
|}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
</includeonly><section end=RELEASE_BUSTER_V1.2_VAR-SOM-MX8/><!--  
</includeonly><section end=RELEASE_SUMO_B2QT_V1.1_VAR-SOM-MX8/><!--
 
--><section begin=MCUXPRESSO_2.5.2_V1.0_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial MCUXpresso 2.5.2 release for the Cortex-M4 cores of the VAR-SOM-MX8 / SPEAR-MX8
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.5.2_V1.0_VAR-SOM-MX8/><!--


--><section begin=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8/><includeonly>
--><section begin=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8/><includeonly>
Line 306: Line 457:
! Change List
! Change List
|-
|-
| Initial release for Cortex-M4 core of VAR-SOM-MX8 / SPEAR-MX8
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial MCUXpresso 2.8.0 release for the Cortex-M4 cores of the VAR-SOM-MX8 / SPEAR-MX8  
|-
|-
| '''Tests conducted on:'''
| '''Tests conducted on:'''
Line 333: Line 486:
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8/><!--
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8/><!--


--><section begin=RELEASE_SUMO_B2QT_V1.1_VAR-SOM-MX8/><includeonly>  
--><section begin=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8/><includeonly>
{| class="wikitable"  
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial MCUXpresso 2.9.0 release for the Cortex-M4 cores of the VAR-SOM-MX8 / SPEAR-MX8
|-
| '''Tests conducted on:'''
|-
| M40_UART0
|-
| DMA_UART2
|-
| DMA_UART4
|-
| FLEXCAN0
|-
| M41_I2C0
|-
| DMA_I2C0
|-
| DMA_SPI0
|-
| ADC_IN6
|-
| M40_TPM0
|-
| GPIO3_IO06
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8/><!--
 
--><section begin=mx8-debian-bullseye-5.4-2.1.x-v1.2/><includeonly>
{| class="wikitable"
|-  
|-  
! Change List !! Description
{{#lst:DPC_VAR-SOM-MX8|RN_mx8-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-debian-bullseye-5.4-2.1.x-v1.2/><!--
--><section begin=RELEASE_BULLSEYE_V1.1_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|'''U-Boot''' ||
|-
|imx8qm-var-som: Introduce support for the i.MX8QP SoC ||
|-
|imx8qm-var-som: Provide som_wifi kernel argument ||
|-
|imx8: ahab: Only compile ahab.c for u-boot ||
|-
|'''Kernel''' ||
|-
|Updated the kernel from version 5.4.85 to 5.4.142 ||
|-
|imx8qm-var-som: Introduce support for the i.MX8QP SoC ||
|-
|imx8_var_defconfig: add full docker support ||
|-
|imx8qm-var-som: enable internal pullups for i2c0, i2c1, i2c3, i2c4 ||
|-
|Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
|sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
|'''debian-var''' ||
|-
|imx8qm-var-som: introduce support for the i.MX8QP SoC ||
|-
|freertos_variscite: disabled disable_cache binary generation when DISABLE_CACHE_PATCH is undefined ||
|-
|linux-headers_debian_src: update compatibility ||
|-
|pulesaudio: Fix pulseaudio system-wide mode ||
|-
|systemd: set HandlePowerKey to ignore ||
|-
|bluez-alsa: ported bluez-alsa support from yocto-dunfell ||
|-
|weston_rootfs: Add libgpiod and libgpiod tools ||
|-
|imx8 soms: Check DISABLE_CACHE_PATCH variable before applying cache patch ||
|-
|imx8: libgbm1 updated to 20.3.4-1 required by latest weston update ||
|-
|imx8: Fix imx-gpu-viv-wl package dependency issue ||
|-
|variscite-bt-common: Check for hci0 at beginning of bt_stop ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Debian Bullseye release for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
| Added support for loading the M4 firmware using the Linux Remoteproc Framework ||
|-
| Added support for loading the M4 firmware using U-Boot ||
|-
! Known Issues !! Description
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_BULLSEYE_V1.1_VAR-SOM-MX8/><!--
--><section begin=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Debian Bullseye release for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
| Added support for loading the M4 firmware using the Linux Remoteproc Framework ||
|-
| Added support for loading the M4 firmware using U-Boot ||
|-
! Known Issues !!
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8/><!--
--><section begin=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 11.0.0 v1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||  
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK
|-
| DisplayPort suspend/resume issue || Link training fails for DP upon resume from suspend
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.0/><!--
 
--><section begin=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71
|-
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue
|-
| Bluez-alsa  ||  Replace pulseaudio with bluez-alsa
Play audio over Bluetooth using alsa without pulseaudio
|-
| systemd-serialgetty: Use standard target filesystem paths ||
|-
| bcm43xx-utils: Use standard target filesystem paths ||
|-
| systemd: add dependencies to avoid conflict between connman and systemd-networkd ||
|-
| psplash: switch to using png images for logo and bar ||
|-
| pm-utils: wifi: force connman/wpa_supplicant restart ||
|-
| Move bbappend to dynamic layers ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Added support for loading the M4 firmware using the Linux Remoteproc Framework ||
|-
| Added support for loading the M4 firmware using U-Boot ||
|-
| Disabled audiomix ||
|-
| Fixed SPI dma issue ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8/><!--
 
--><section begin=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Updated the kernel from 5.4.85 to 5.4.142 ||
|-
| Updated the Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71
|-
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue
|-
| Bluez-alsa  ||  Replace pulseaudio with bluez-alsa
Play audio over Bluetooth using alsa without pulseaudio
|-
| systemd-serialgetty: Use standard target filesystem paths ||
|-
| bcm43xx-utils: Use standard target filesystem paths ||
|-
| systemd: add dependencies to avoid conflict between connman and systemd-networkd ||
|-
| psplash: switch to using png images for logo and bar ||
|-
| pm-utils: wifi: force connman/wpa_supplicant restart ||
|-
| Move bbappend to dynamic layers ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Added support for loading the M4 firmware using the Linux Remoteproc Framework ||
|-
| Added support for loading the M4 firmware using U-Boot ||
|-
| Disabled audiomix ||
|-
| Fixed SPI dma issue ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8/><!--
 
--><section begin=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| U-Boot: Introduce support for the i.MX8QP SoC ||
|-
| U-Boot: Provide som_wifi kernel argument ||
|-
| U-Boot: Do not compile ahab.c for SPL ||
|-
| Linux: Introduce support for the i.MX8QP SoC ||
|-
| Linux: sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Updated the kernel from 5.4.85 to 5.4.142 ||
|-
| Updated the Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71
|-
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue
|-
| Bluez-alsa  ||  Replace pulseaudio with bluez-alsa
Play audio over Bluetooth using alsa without pulseaudio
|-
| systemd-serialgetty: Use standard target filesystem paths ||
|-
| bcm43xx-utils: Use standard target filesystem paths ||
|-
| systemd: add dependencies to avoid conflict between connman and systemd-networkd ||
|-
| psplash: switch to using png images for logo and bar ||
|-
| pm-utils: wifi: force connman/wpa_supplicant restart ||
|-
| Move bbappend to dynamic layers ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Added support for loading the M4 firmware using the Linux Remoteproc Framework ||
|-
| Added support for loading the M4 firmware using U-Boot ||
|-
| Disabled audiomix ||
|-
| Fixed SPI dma issue ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8/><!--
 
--><section begin=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Linux: Enabled driver for ADIN1300 PHY ||
|-
| Linux: Added RGMII RX Clock Delay for Symphony-Board Ethernet port ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| U-Boot: Introduce support for the i.MX8QP SoC ||
|-
| U-Boot: Provide som_wifi kernel argument ||
|-
| U-Boot: Do not compile ahab.c for SPL ||
|-
| Linux: Introduce support for the i.MX8QP SoC ||
|-
| Linux: sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Updated the kernel from 5.4.85 to 5.4.142 ||
|-
| Updated the Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71
|-
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue
|-
| Bluez-alsa  ||  Replace pulseaudio with bluez-alsa
Play audio over Bluetooth using alsa without pulseaudio
|-
| systemd-serialgetty: Use standard target filesystem paths ||
|-
| bcm43xx-utils: Use standard target filesystem paths ||
|-
| systemd: add dependencies to avoid conflict between connman and systemd-networkd ||
|-
| psplash: switch to using png images for logo and bar ||
|-
| pm-utils: wifi: force connman/wpa_supplicant restart ||
|-
| Move bbappend to dynamic layers ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Added support for loading the M4 firmware using the Linux Remoteproc Framework ||
|-
| Added support for loading the M4 firmware using U-Boot ||
|-
| Disabled audiomix ||
|-
| Fixed SPI dma issue ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8/><!--
 
--><section begin=mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
 
--><section begin=mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
 
--><section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
 
--><section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly>
{| class="wikitable"
|-  
|-  
| VAR-SOM-MX8: Added support for Symphony-Board revision 1.3A || Added internal RX delay for Ethernet PHY on Symphony-Board
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
 
--><section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly>
{| class="wikitable"
|-  
|-  
| Upgraded to Qt 5.12.9 ||  
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
 
--><section begin=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
! Change List !! Description
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
 
--><section begin=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-  
|-  
| First release ||
! Change List !! Description
|}  
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.0}}
{{#vardefine:CHANGE_LOG_FOUND|true}}  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
</includeonly><section end=RELEASE_SUMO_B2QT_V1.1_VAR-SOM-MX8/><!--


--><section begin=MCUXPRESSO_2.5.2_V1.0_VAR-SOM-MX8/><includeonly>  
--><section begin=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| U-Boot: Introduce support for the i.MX8QP SoC ||
|-
| Linux: Introduce support for the i.MX8QP SoC ||
|-
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled
|-
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frameAPI ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 11.0.0_1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-  
|-  
! Change List
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK
|-
| DisplayPort suspend/resume issue || Link training fails for DP upon resume from suspend
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.1/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|Linux: Enabled driver for ADIN1300 PHY ||
|-
|Linux: Added RGMII RX Clock Delay for Symphony-Board Ethernet port ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| U-Boot: Introduce support for the i.MX8QP SoC ||
|-
| Linux: Introduce support for the i.MX8QP SoC ||
|-
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled
|-
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frameAPI ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 11.0.0_1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8 ||
|-
! Known Issues !!
|-  
|-  
| Initial release for Cortex-M4 core of VAR-SOM-MX8 / SPEAR-MX8  
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK
|}  
|-
{{#vardefine:CHANGE_LOG_FOUND|true}}  
| DisplayPort suspend/resume issue || Link training fails for DP upon resume from suspend
</includeonly><section end=MCUXPRESSO_2.5.2_V1.0_VAR-SOM-MX8/>
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.2/><!--
 
--><section begin=mx8-android-11.0.0_1.0.0-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_VAR-SOM-MX8|RN_mx8-android-11.0.0_1.0.0-v1.3}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-android-11.0.0_1.0.0-v1.3/><!--
 
--><section begin=mx8-android-13.0.0_1.2.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_VAR-SOM-MX8|RN_mx8-android-13.0.0_1.2.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-android-13.0.0_1.2.0-v1.0/><!--
-->

Latest revision as of 11:44, 25 January 2024


VAR-SOM-MX8 / SPEAR-MX8 Release Notes

Yocto zeus-fsl-5.4.3-mx8-v1.2

Release Notes

Based on release Yocto: Poky 3.0, BSP: NXP L5.4.3-1.0.0, Linux: lf-5.4.y
Release tag zeus-fsl-5.4.3-mx8-v1.2
Release manifest imx-5.4.3-1.0.1-var01.xml
Date 12/21/2020
Supported platforms VAR-SOM-MX8 / SPEAR-MX8
SOM revision v1.1 and higher
File System build system Yocto Zeus
Recovery SD card link var-som-mx8-recovery-sd.v22.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx lf-5.4.y_v2019.04_var01 bcdb05a53ea1946cb218cce784946fd03846b89d
Kernel https://github.com/varigit/linux-imx lf-5.4.y_var01 b40ccfdb73ea624fed5b98ff56ce494e8807392c
meta-variscite-imx https://github.com/varigit/meta-variscite-imx zeus-imx-5.4.3-var01 9ff250bc754f0beca60ebae3231c0e29cf7e53e4


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List Description
Release 1.2
U-Boot: Fixed Ethernet issues
U-Boot: Re-added SPL and support for 2/8 GB RAM
SCFW: Upgraded to version 1.2.10
kernel: Added support for resuming from suspend using touch/GPIOs
meta-layer: Updated bc43xx Bluetooth/Wi-Fi firmware to 8.2.0.16
Release 1.1
Ethernet phy1 fix for Symphony-Board rev. 1.4
Release 1.0
Initial Yocto Zeus release for VAR-SOM-MX8 and SPEAR-MX8
Known Issues
HDMI and DP suspend/resume crash Using HDMI or DP display, resume from suspend ends up in a kernel crash
USB Type-A ports are not supported in U-Boot on SPEAR-MX8 U-Boot USB driver does not recognize USB devices behind the hub
Retrieved from "https://variwiki.com/index.php?title=VAR-SOM-MX8_Release_Notes&oldid=25354"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 25 January 2024, at 11:44.

© 2024 Variscite. All rights reserved