VAR-SOM-MX8M-MINI-Rev10: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
 
(6 intermediate revisions by 2 users not shown)
Line 2: Line 2:
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_DUNFELL_V1.1_DART-MX8M-MINI}}}} <!--
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_DUNFELL_V1.1_DART-MX8M-MINI}}}} <!--
--> {{PageHeader|VAR-SOM-MX8M-MINI/NANO Revision 1.0 Support}} {{DocImage|category1=Yocto|category2=Android}}[[Category:Debian]][[Category:DART-MX8M-MINI]][[Category:VAR-SOM-MX8M-NANO]]__toc__
--> {{PageHeader|VAR-SOM-MX8M-MINI/NANO Revision 1.0 Support}} {{DocImage|category1=Yocto|category2=Android}}[[Category:Debian]][[Category:Boot2Qt]][[Category:DART-MX8M-MINI]][[Category:VAR-SOM-MX8M-NANO]]__toc__
This tutorial shows how to adjust kernel DTS files for VAR-SOM-MX8M-MINI/NANO Revision 1.0. This old SOM revision is not officially supported in recent Yocto versions.
This tutorial shows how to adjust kernel DTS files for VAR-SOM-MX8M-MINI/NANO revision 1.0, as starting from Yocto Dunfell this old SOM revision is not supported "out of the box".


= On Symphony-Board 1.4a and above =
= On Symphony-Board 1.4a and above =
Line 89: Line 89:
Apply the following patch to imx8mn-var-som-symphony-legacy.dts:
Apply the following patch to imx8mn-var-som-symphony-legacy.dts:
<syntaxhighlight lang="diff">
<syntaxhighlight lang="diff">
--- arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-legacy.dts    2020-12-30 23:28:09.881966875 +0200
--- arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony-legacy.dts    2020-12-30 23:28:09.881966875 +0200
+++ arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-legacy-rev10.dts      2021-01-10 09:22:13.465180492 +0200
+++ arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony-legacy-rev10.dts      2021-01-10 09:22:13.465180492 +0200
@@ -10,7 +10,21 @@
@@ -10,7 +10,21 @@
         model = "Variscite VAR-SOM-MX8M-MINI on Symphony-Board 1.4 and below";
         model = "Variscite VAR-SOM-MX8M-NANO on Symphony-Board 1.4 and below";
  };
  };
   
   
Line 100: Line 100:
+      pinctrl_usdhc2_gpio: usdhc2grpgpio {
+      pinctrl_usdhc2_gpio: usdhc2grpgpio {
+              fsl,pins = <
+              fsl,pins = <
+                      MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12       0xc1
+                      MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12       0xc1
+              >;
+              >;
+      };
+      };
Line 106: Line 106:
+      pinctrl_extcon: extcongrp {
+      pinctrl_extcon: extcongrp {
+              fsl,pins = <
+              fsl,pins = <
+                      MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10     0x16
+                      MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10     0x16
+              >;
+              >;
+      };
+      };
Line 116: Line 116:
</syntaxhighlight>
</syntaxhighlight>
| }}}}
| }}}}
= CAN bus =
See also: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO Rev 1.0/1.1/1.2 CAN bus support]]

Latest revision as of 11:47, 7 February 2022

VAR-SOM-MX8M-MINI/NANO Revision 1.0 Support

This tutorial shows how to adjust kernel DTS files for VAR-SOM-MX8M-MINI/NANO revision 1.0, as starting from Yocto Dunfell this old SOM revision is not supported "out of the box".

On Symphony-Board 1.4a and above

Apply the following patch to imx8mm-var-som-symphony.dts: 

--- arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts   2020-12-30 23:16:31.021169623 +0200
+++ arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-rev10.dts     2021-01-10 09:16:31.586865372 +0200
@@ -214,7 +214,7 @@
 
        pinctrl_usdhc2_gpio: usdhc2grpgpio {
                fsl,pins = <
-                       MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10              0xc1
+                       MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12                0xc1
                >;
        };
 
@@ -487,7 +487,7 @@
        pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
        pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
        pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-       cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+       cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
        vmmc-supply = <&reg_usdhc2_vmmc>;
        status = "okay";

On Symphony-Board 1.4 and below

Apply the following patch to imx8mm-var-som-symphony-legacy.dts: 

--- arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-legacy.dts    2020-12-30 23:28:09.881966875 +0200
+++ arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony-legacy-rev10.dts      2021-01-10 09:22:13.465180492 +0200
@@ -10,7 +10,21 @@
        model = "Variscite VAR-SOM-MX8M-MINI on Symphony-Board 1.4 and below";
 };
 
-&usbotg1 {
-       /delete-property/ extcon;
+&iomuxc {
+       pinctrl_usdhc2_gpio: usdhc2grpgpio {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12        0xc1
+               >;
+       };
+
+       pinctrl_extcon: extcongrp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10      0x16
+               >;
+       };
+};
+
+&usdhc2 {
+       cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 };

CAN bus

See also: VAR-SOM-MX8M-MINI/NANO Rev 1.0/1.1/1.2 CAN bus support

Retrieved from "https://variwiki.com/index.php?title=VAR-SOM-MX8M-MINI-Rev10&oldid=19225"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 7 February 2022, at 11:47.

© 2024 Variscite. All rights reserved