VAR-SOM-MX8 Release Notes: Difference between revisions
From Variscite Wiki
(Created page with "<!-- --> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- Set RELEASE_PARAM from url parameter --> {{#vardefine:RELEASE_...") |
(VAR-SOM-MX8: Mickledore 6.1.36-2.1.0 v1.0) |
||
(123 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
<!-- | <!-- | ||
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- Set RELEASE_PARAM from url parameter | --> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- Set RELEASE_PARAM from url parameter | ||
--> {{#vardefine:RELEASE_PARAM|{{#var:RELEASE_PARAM|RELEASE_ZEUS_V1. | --> {{#vardefine:RELEASE_PARAM|{{#var:RELEASE_PARAM|RELEASE_ZEUS_V1.2_VAR-SOM-MX8}}}} <!-- If RELEASE_PARAM unset, default to something | ||
--> {{#lst:Release_Notes_Template|Release_Notes_Header}} <!-- Include common release notes template | --> {{#lst:Release_Notes_Template|Release_Notes_Header}} <!-- Include common release notes template | ||
Instructions: Add a new change log section below for each release | Instructions: Add a new change log section below for each release | ||
--> | --><section begin=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8/><includeonly> | ||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Added support for loading the M4 firmware using the Linux Remoteproc Framework || | |||
|- | |||
| Added support for loading the M4 firmware using U-Boot || | |||
|- | |||
| Disabled audiomix || | |||
|- | |||
| Fixed SPI dma issue || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_ZEUS_V1.2_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| U-Boot: Fixed Ethernet issues || | |||
|- | |||
| U-Boot: Re-added SPL and support for 2/8 GB RAM || | |||
|- | |||
| SCFW: Upgraded to version 1.2.10 || | |||
|- | |||
| kernel: Added support for resuming from suspend using touch/GPIOs || | |||
|- | |||
| meta-layer: Updated bc43xx Bluetooth/Wi-Fi firmware to 8.2.0.16 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Ethernet phy1 fix for Symphony-Board rev. 1.4 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Zeus release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_ZEUS_V1.2_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_ZEUS_V1.1_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Ethernet phy1 fix for Symphony-Board rev. 1.4 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Zeus release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_ZEUS_V1.1_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_SUMO_V1.9_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.9</span> || | |||
|- | |||
| VAR-SOM-MX8: Added support for Symphony-Board revision 1.3A || Added internal RX delay for Ethernet PHY on Symphony-Board | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.8</span> || | |||
|- | |||
| Upgraded SCFW to version 1.2.10 || | |||
|- | |||
| Upgraded SCFW DRAM configuration to RPA V19 CBT || | |||
|- | |||
| Added SCFW support for reading DRAM configuration from EEPROM || Required to support various DRAM sizes and configurations using a single boot image | |||
|- | |||
| Enabled U-Boot SPL || Required for customized DRAM configurations in SC firmware | |||
|- | |||
| Enabled U-Boot support for reading DRAM size from EEPROM || Instead of hardcoding DRAM size in U-Boot configuration, read actual DRAM size from EEPROM | |||
|- | |||
| Fixed alsactl store/restore sequence || alsactl -f state.conf store/restore sequence was failing due to driver bug, fixed now | |||
|- | |||
| Fixed Bluetooth suspend/resume sequence || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> || | |||
|- | |||
| Fixed WiFi detection on latest revision of VAR-SOM-MX8 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> || | |||
|- | |||
| Upgraded SCFW to version 1.2.8 || Required to support latest CPU and PMIC revisions | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> || | |||
|- | |||
| Added Android support for SPEAR-MX8 || | |||
|- | |||
| Fixed capacitive touch interrupt for VAR-SOM-MX8 || Fixes capacitive touch on Symphony-Board v1.2, backwards compatible with older Symphony-Board revisions | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| Added Yocto support for SPEAR-MX8 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Added Android support for VAR-SOM-MX8 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Added HDMI and DP support for VAR-SOM-MX8 || HDMI and DP displays are now supported via Variscite extension modules | |||
|- | |||
| Fixed DRAM instability problem || Updated to latest NXP ATF release that fixes Cortex A72 cache configuration | |||
|- | |||
| Disabled U-Boot splash on LVDS display || Fixes U-Boot hang on reboot when HDMI or DP displays are connected | |||
|- | |||
| Fixed occasional WiFi driver crashes on reboot/poweroff || Do not stop Variscite WiFi service or reboot/poweroff as this causes occasional WiFi driver crashes | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Initial Yocto release for VAR-SOM-MX8 || | |||
|- | |||
! Known Issues !! Description | |||
|- | |||
| SATA is disabled on SPEAR-MX8 || i.MX8QM SATA support in Linux is currently not stable, disabled in DTS | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_SUMO_V1.9_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_P9.0.0_2.0.0_GA_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> || | |||
|- | |||
| Ethernet phy1 fix for Symphony-Board rev. 1.4 || | |||
|- | |||
| Restructured audio policy configuration || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.10</span> || | |||
|- | |||
| VAR-SOM-MX8: Added support for Symphony-Board v1.3A || Added internal RX delay for 2nd Ethernet PHY on Symphony-Board | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.9</span> || | |||
|- | |||
| '''Android:''' || | |||
|- | |||
| Fix for suspend/resume crash || | |||
|- | |||
| Added MTP and PTP support || The current ptn5150 driver does not support power delivery role swap | |||
|- | |||
| Android policies change to use either eth0 or eth1 interface. || | |||
|- | |||
| Add USB3 and OTG automount support in fstab || | |||
|- | |||
| '''U-Boot:''' || | |||
|- | |||
| Added support for SPL || | |||
|- | |||
| imx-sc-firmware: Upgraded to SCFW ver. 1.2.10 || | |||
|- | |||
| Upgraded LPDDR4 configuration to RPA V19 CBT || | |||
|- | |||
| Read DDR configuration from EEPROM || | |||
|- | |||
| SPL: Disable SD Card Detect pin || | |||
|- | |||
| Add support for reading DRAM size from the EEPROM || | |||
|- | |||
| Load HDP firmware from vendor partition to support DP and HDMI || | |||
|- | |||
| USB storage: Limit transfer size to 120 kiB || | |||
|- | |||
| Autoboot: Stop setting the environment to default when booting from USB || | |||
|- | |||
| '''Kernel:''' || | |||
|- | |||
| Added support for HDMI audio || | |||
|- | |||
| MLK-23408: ASoC: fsl_amix: make clock and output src write only || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.8</span> || | |||
|- | |||
| Added HDMI / DP support || | |||
|- | |||
| Improved WiFi stability over SDIO || | |||
|- | |||
| Moved backlight.dev to kernel bootargs to be dtb dependent || | |||
|- | |||
| Extended USB key support to all available USB ports || | |||
|- | |||
| Fixed WiFi detection on latest revision of VAR-SOM-MX8 || | |||
|- | |||
| Fixed bootable SD card creation when SD card has no partitions || | |||
|- | |||
| Upgraded BT and WiFi to Laird release 7.0.0.142 || | |||
|- | |||
| Upgraded SCFW to ver. 1.2.8 to support latest CPU and PMIC revisions || | |||
|- | |||
| Restored mutual exclusion between STA and AP || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> || | |||
|- | |||
| Added Android support for SPEAR-MX8 || | |||
|- | |||
| Fixed VAR-SOM-MX8 on Symphony-Board V1.2 touchscreen support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| None (recovery SD with Yocto updates only) || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Added Android support for VAR-SOM-MX8 || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_P9.0.0_2.0.0_GA_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_10.0.0_2.5.0_VAR-SOM-MX8_V1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release based on NXP's android-10.0.0_2.5.0 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| DisplayPort suspend/resume issue || Link training fails for DP upon resume from suspend | |||
|- | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.5.0_VAR-SOM-MX8_V1.0/><!-- | |||
--><section begin=RELEASE_BUSTER_V1.2_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release v1.2</span> || | |||
|- | |||
| '''Kernel updates:''' || | |||
|- | |||
| Ethernet phy1 fix for Symphony-Board rev. 1.4 || | |||
|- | |||
| '''Debian Build Updates:''' || | |||
|- | |||
| Update WiFi/BT firmware from 6.0.0.121 to 7.0.0.142 branch || | |||
|- | |||
| Fixed WiFi startup issue on some SOMs || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release v1.1</span> || | |||
|- | |||
| '''U-Boot updates:''' || | |||
|- | |||
| Support for reading DRAM size from the EEPROM || | |||
|- | |||
| SPL support || | |||
|- | |||
| usb: storage: Limited transfer size to 120 kiB to support more devices || | |||
|- | |||
| '''Kernel updates:''' || | |||
|- | |||
| Fixed missing/wrong parameters for pwm0-7 nodes || | |||
|- | |||
| '''Debian Build Updates:''' || | |||
|- | |||
| Updated imx-mkimage build target to support U-Boot SPL || | |||
|- | |||
| WiFi bugfixes for occasional kernel dump during reboot || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release v1.0</span> || | |||
|- | |||
| imx-gpu-sdk 5.3.0 demos || Demos include samples for EGL, OpenVG, G2D, OpenGL ES 2, OpenGL ES 3, OpenGL ES 3.1, OpenCL, OpenCL 1.1 & OpenCL 1.2 | |||
|- | |||
| Initial Debian Buster release with Docker support || Support for VAR-SOM-MX8 and SPEAR-MX8 | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_BUSTER_V1.2_VAR-SOM-MX8/><!-- | |||
--><section begin=mx8-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_VAR-SOM-MX8|RN_mx8-b2qt-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-b2qt-kirkstone-5.15-2.0.x-v1.0/><!-- | |||
--><section begin=mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:B2QT_VAR-SOM-MX8|RN_mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!-- | |||
--><section begin=mx8-b2qt-dunfell-5.4-2.1.x-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
{{#lst:B2QT_VAR-SOM-MX8|RN_mx8-b2qt-dunfell-5.4-2.1.x-v1.2}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-b2qt-dunfell-5.4-2.1.x-v1.2/><!-- | |||
<section begin= | --><section begin=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8/><includeonly> | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! | ! Change List | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> | | <span {{#var:STYLE_RELEASE}}>Release 1.1</span> | ||
|- | |- | ||
| | |'''U-Boot''' | ||
|- | |||
|imx8qm-var-som: Introduce support for the i.MX8QP SoC | |||
|- | |||
|imx8qm-var-som: Provide som_wifi kernel argument | |||
|- | |||
|imx8: ahab: Only compile ahab.c for u-boot | |||
|- | |||
|imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot | |||
|- | |||
|'''Kernel''' | |||
|- | |||
|Update kernel from version 5.4.85 to 5.4.142 | |||
|- | |||
|imx8_var_defconfig: add full docker support | |||
|- | |||
|imx8qm-var-som: Introduce support for the i.MX8QP SoC | |||
|- | |||
|imx8qm-var-som: enable internal pullups for i2c0, i2c1, i2c3, i2c4 | |||
|- | |||
|Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" | |||
|- | |||
|sn65dsi83: Add device tree property to swap LVDS Channel A/B | |||
|- | |||
|imx8qm-var-spear: Adjust usb hsic pad settings | |||
|- | |||
|ARM: configs: Variscite: Enable USB_HSIC_USB3053 | |||
|- | |||
|ARM: configs: Variscite: disable EVBUG module | |||
|- | |||
|ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs | |||
|- | |||
|ASoC: wm8904: extend device tree support | |||
|- | |||
|'''meta-variscite-boot2qt''' | |||
|- | |||
|Update Qt from version 6.0.3 to 6.0.4 | |||
|- | |||
|manifest: meta-variscite-fslc: Update to latest | |||
|- | |||
|b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools | |||
|- | |||
|b2qt-embedded-qt5-image: allow disabling virtual terminals | |||
|- | |||
|Variscite: mask linux-firmware bbappend in meta-boot2qt-distro | |||
|- | |||
|Merge branch '6.0' into dunfell-var01 | |||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | ||
|- | |- | ||
| | | First Release | ||
|} | |} | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end= | </includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_VAR-SOM-MX8/><!-- | ||
<section begin= | --><section begin=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8/><includeonly> | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! | ! Change List | ||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |- | ||
| | | First Release | ||
|} | |} | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end= | </includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_VAR-SOM-MX8/><!-- | ||
<section begin= | --><section begin=RELEASE_SUMO_B2QT_V1.1_VAR-SOM-MX8/><includeonly> | ||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| VAR-SOM-MX8: Added support for Symphony-Board revision 1.3A || Added internal RX delay for Ethernet PHY on Symphony-Board | |||
|- | |||
| Upgraded to Qt 5.12.9 || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| First release || | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_SUMO_B2QT_V1.1_VAR-SOM-MX8/><!-- | |||
--><section begin=MCUXPRESSO_2.5.2_V1.0_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! | ! Change List | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}> | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | ||
|- | |||
| Initial MCUXpresso 2.5.2 release for the Cortex-M4 cores of the VAR-SOM-MX8 / SPEAR-MX8 | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=MCUXPRESSO_2.5.2_V1.0_VAR-SOM-MX8/><!-- | |||
--><section begin=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |||
| Initial MCUXpresso 2.8.0 release for the Cortex-M4 cores of the VAR-SOM-MX8 / SPEAR-MX8 | |||
|- | |||
| '''Tests conducted on:''' | |||
|- | |||
| M40_UART0 | |||
|- | |||
| DMA_UART2 | |||
|- | |||
| DMA_UART4 | |||
|- | |||
| FLEXCAN0 | |||
|- | |||
| M41_I2C0 | |||
|- | |||
| DMA_I2C0 | |||
|- | |||
| DMA_SPI0 | |||
|- | |||
| ADC_IN6 | |||
|- | |||
| M40_TPM0 | |||
|- | |||
| GPIO3_IO06 | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end= | </includeonly><section end=MCUXPRESSO_2.8.0_V1.0_VAR-SOM-MX8/><!-- | ||
<section begin=MCUXPRESSO_2. | --><section begin=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8/><includeonly> | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
! | ! Change List | ||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> | |||
|- | |- | ||
| Initial release for Cortex-M4 | | Initial MCUXpresso 2.9.0 release for the Cortex-M4 cores of the VAR-SOM-MX8 / SPEAR-MX8 | ||
|- | |- | ||
| '''Tests conducted on:''' | | '''Tests conducted on:''' | ||
Line 73: | Line 518: | ||
|} | |} | ||
{{#vardefine:CHANGE_LOG_FOUND|true}} | {{#vardefine:CHANGE_LOG_FOUND|true}} | ||
</includeonly><section end=MCUXPRESSO_2.8. | </includeonly><section end=MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8/><!-- | ||
--><section begin=mx8-debian-bullseye-5.4-2.1.x-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:DPC_VAR-SOM-MX8|RN_mx8-debian-bullseye-5.4-2.1.x-v1.2}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-debian-bullseye-5.4-2.1.x-v1.2/><!-- | |||
--><section begin=RELEASE_BULLSEYE_V1.1_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
|'''U-Boot''' || | |||
|- | |||
|imx8qm-var-som: Introduce support for the i.MX8QP SoC || | |||
|- | |||
|imx8qm-var-som: Provide som_wifi kernel argument || | |||
|- | |||
|imx8: ahab: Only compile ahab.c for u-boot || | |||
|- | |||
|'''Kernel''' || | |||
|- | |||
|Updated the kernel from version 5.4.85 to 5.4.142 || | |||
|- | |||
|imx8qm-var-som: Introduce support for the i.MX8QP SoC || | |||
|- | |||
|imx8_var_defconfig: add full docker support || | |||
|- | |||
|imx8qm-var-som: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || | |||
|- | |||
|Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" || | |||
|- | |||
|sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
|'''debian-var''' || | |||
|- | |||
|imx8qm-var-som: introduce support for the i.MX8QP SoC || | |||
|- | |||
|freertos_variscite: disabled disable_cache binary generation when DISABLE_CACHE_PATCH is undefined || | |||
|- | |||
|linux-headers_debian_src: update compatibility || | |||
|- | |||
|pulesaudio: Fix pulseaudio system-wide mode || | |||
|- | |||
|systemd: set HandlePowerKey to ignore || | |||
|- | |||
|bluez-alsa: ported bluez-alsa support from yocto-dunfell || | |||
|- | |||
|weston_rootfs: Add libgpiod and libgpiod tools || | |||
|- | |||
|imx8 soms: Check DISABLE_CACHE_PATCH variable before applying cache patch || | |||
|- | |||
|imx8: libgbm1 updated to 20.3.4-1 required by latest weston update || | |||
|- | |||
|imx8: Fix imx-gpu-viv-wl package dependency issue || | |||
|- | |||
|variscite-bt-common: Check for hci0 at beginning of bt_stop || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Debian Bullseye release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
| Added support for loading the M4 firmware using the Linux Remoteproc Framework || | |||
|- | |||
| Added support for loading the M4 firmware using U-Boot || | |||
|- | |||
! Known Issues !! Description | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_BULLSEYE_V1.1_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Debian Bullseye release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
| Added support for loading the M4 firmware using the Linux Remoteproc Framework || | |||
|- | |||
| Added support for loading the M4 firmware using U-Boot || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_BULLSEYE_V1.0_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Android 11.0.0 v1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK | |||
|- | |||
| DisplayPort suspend/resume issue || Link training fails for DP upon resume from suspend | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.0/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71 | |||
|- | |||
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue | |||
|- | |||
| Bluez-alsa || Replace pulseaudio with bluez-alsa | |||
Play audio over Bluetooth using alsa without pulseaudio | |||
|- | |||
| systemd-serialgetty: Use standard target filesystem paths || | |||
|- | |||
| bcm43xx-utils: Use standard target filesystem paths || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| psplash: switch to using png images for logo and bar || | |||
|- | |||
| pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Added support for loading the M4 firmware using the Linux Remoteproc Framework || | |||
|- | |||
| Added support for loading the M4 firmware using U-Boot || | |||
|- | |||
| Disabled audiomix || | |||
|- | |||
| Fixed SPI dma issue || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Updated the kernel from 5.4.85 to 5.4.142 || | |||
|- | |||
| Updated the Yocto meta layers to latest: | |||
yocto/poky | |||
yocto/meta-freescale | |||
oe/meta-openembedded | |||
oe/meta-python2 | |||
freescale/meta-freescale-3rdparty | |||
freescale/meta-freescale-distro | |||
freescale/Documentation | |||
QT5/meta-qt5 | |||
sbabic/meta-swupdate | |||
yocto/meta-virtualization | |||
varigit/meta-variscite-fslc | |||
|- | |||
| linux-firmware: update TI WL18xx BT service pack to v4.7 || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71 | |||
|- | |||
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue | |||
|- | |||
| Bluez-alsa || Replace pulseaudio with bluez-alsa | |||
Play audio over Bluetooth using alsa without pulseaudio | |||
|- | |||
| systemd-serialgetty: Use standard target filesystem paths || | |||
|- | |||
| bcm43xx-utils: Use standard target filesystem paths || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| psplash: switch to using png images for logo and bar || | |||
|- | |||
| pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Added support for loading the M4 firmware using the Linux Remoteproc Framework || | |||
|- | |||
| Added support for loading the M4 firmware using U-Boot || | |||
|- | |||
| Disabled audiomix || | |||
|- | |||
| Fixed SPI dma issue || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| U-Boot: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| U-Boot: Provide som_wifi kernel argument || | |||
|- | |||
| U-Boot: Do not compile ahab.c for SPL || | |||
|- | |||
| Linux: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| Linux: sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Updated the kernel from 5.4.85 to 5.4.142 || | |||
|- | |||
| Updated the Yocto meta layers to latest: | |||
yocto/poky | |||
yocto/meta-freescale | |||
oe/meta-openembedded | |||
oe/meta-python2 | |||
freescale/meta-freescale-3rdparty | |||
freescale/meta-freescale-distro | |||
freescale/Documentation | |||
QT5/meta-qt5 | |||
sbabic/meta-swupdate | |||
yocto/meta-virtualization | |||
varigit/meta-variscite-fslc | |||
|- | |||
| linux-firmware: update TI WL18xx BT service pack to v4.7 || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71 | |||
|- | |||
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue | |||
|- | |||
| Bluez-alsa || Replace pulseaudio with bluez-alsa | |||
Play audio over Bluetooth using alsa without pulseaudio | |||
|- | |||
| systemd-serialgetty: Use standard target filesystem paths || | |||
|- | |||
| bcm43xx-utils: Use standard target filesystem paths || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| psplash: switch to using png images for logo and bar || | |||
|- | |||
| pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Added support for loading the M4 firmware using the Linux Remoteproc Framework || | |||
|- | |||
| Added support for loading the M4 firmware using U-Boot || | |||
|- | |||
| Disabled audiomix || | |||
|- | |||
| Fixed SPI dma issue || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8/><!-- | |||
--><section begin=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> || | |||
|- | |||
| Linux: Enabled driver for ADIN1300 PHY || | |||
|- | |||
| Linux: Added RGMII RX Clock Delay for Symphony-Board Ethernet port || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> || | |||
|- | |||
| U-Boot: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| U-Boot: Provide som_wifi kernel argument || | |||
|- | |||
| U-Boot: Do not compile ahab.c for SPL || | |||
|- | |||
| Linux: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| Linux: sn65dsi83: Add device tree property to swap LVDS Channel A/B || | |||
|- | |||
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
| Updated the kernel from 5.4.85 to 5.4.142 || | |||
|- | |||
| Updated the Yocto meta layers to latest: | |||
yocto/poky | |||
yocto/meta-freescale | |||
oe/meta-openembedded | |||
oe/meta-python2 | |||
freescale/meta-freescale-3rdparty | |||
freescale/meta-freescale-distro | |||
freescale/Documentation | |||
QT5/meta-qt5 | |||
sbabic/meta-swupdate | |||
yocto/meta-virtualization | |||
varigit/meta-variscite-fslc | |||
|- | |||
| linux-firmware: update TI WL18xx BT service pack to v4.7 || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 || | |||
|- | |||
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 || | |||
|- | |||
| fsl-image-gui: Add libgpiod and libgpiod-tools || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| Fix occasional device errors on USB3503 hub || usb 1-1.2: device no response, device descriptor read/64, error -71 | |||
|- | |||
| wm8904: extend device tree support || Re-work DMIC support to address low volume issue | |||
|- | |||
| Bluez-alsa || Replace pulseaudio with bluez-alsa | |||
Play audio over Bluetooth using alsa without pulseaudio | |||
|- | |||
| systemd-serialgetty: Use standard target filesystem paths || | |||
|- | |||
| bcm43xx-utils: Use standard target filesystem paths || | |||
|- | |||
| systemd: add dependencies to avoid conflict between connman and systemd-networkd || | |||
|- | |||
| psplash: switch to using png images for logo and bar || | |||
|- | |||
| pm-utils: wifi: force connman/wpa_supplicant restart || | |||
|- | |||
| Move bbappend to dynamic layers || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| Added support for loading the M4 firmware using the Linux Remoteproc Framework || | |||
|- | |||
| Added support for loading the M4 firmware using U-Boot || | |||
|- | |||
| Disabled audiomix || | |||
|- | |||
| Fixed SPI dma issue || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Dunfell release for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8/><!-- | |||
--><section begin=mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/><!-- | |||
--><section begin=mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1}} | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/><!-- | |||
--><section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.0/><!-- | |||
--><section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1}} | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.1/><!-- | |||
--><section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.2}} | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1}} | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.2/><!-- | |||
--><section begin=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/><!-- | |||
--><section begin=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/><!-- | |||
--><section begin=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.1/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| U-Boot: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| Linux: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled | |||
|- | |||
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frameAPI || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Android 11.0.0_1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK | |||
|- | |||
| DisplayPort suspend/resume issue || Link training fails for DP upon resume from suspend | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.1/><!-- | |||
--><section begin=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.2/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
|Linux: Enabled driver for ADIN1300 PHY || | |||
|- | |||
|Linux: Added RGMII RX Clock Delay for Symphony-Board Ethernet port || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| U-Boot: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| Linux: Introduce support for the i.MX8QP SoC || | |||
|- | |||
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 || Previously, internal pulldowns were enabled | |||
|- | |||
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frameAPI || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Android 11.0.0_1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8 || | |||
|- | |||
! Known Issues !! | |||
|- | |||
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK | |||
|- | |||
| DisplayPort suspend/resume issue || Link training fails for DP upon resume from suspend | |||
|- | |||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub | |||
|} | |||
{{#vardefine:CHANGE_LOG_FOUND|true}} | |||
</includeonly><section end=RELEASE_11.0.0_1.0.0_VAR-SOM-MX8_V1.2/><!-- | |||
--><section begin=mx8-android-11.0.0_1.0.0-v1.3/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_VAR-SOM-MX8|RN_mx8-android-11.0.0_1.0.0-v1.3}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-android-11.0.0_1.0.0-v1.3/><!-- | |||
--><section begin=mx8-android-13.0.0_1.2.0-v1.0/><includeonly> | |||
{| class="wikitable" | |||
|- | |||
! Change List !! Description | |||
|- | |||
{{#lst:APC_VAR-SOM-MX8|RN_mx8-android-13.0.0_1.2.0-v1.0}} | |||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8-android-13.0.0_1.2.0-v1.0/><!-- | |||
--> |
Latest revision as of 11:44, 25 January 2024
VAR-SOM-MX8
/ SPEAR-MX8 Release Notes
Yocto zeus-fsl-5.4.3-mx8-v1.2
Release Notes
Based on release | Yocto: Poky 3.0, BSP: NXP L5.4.3-1.0.0, Linux: lf-5.4.y |
Release tag | zeus-fsl-5.4.3-mx8-v1.2 |
Release manifest | imx-5.4.3-1.0.1-var01.xml |
Date | 12/21/2020 |
Supported platforms | VAR-SOM-MX8 / SPEAR-MX8 |
SOM revision | v1.1 and higher |
File System build system | Yocto Zeus |
Recovery SD card link | var-som-mx8-recovery-sd.v22.img.gz |
Relevant git Repositories
Source | Repository | Branch | Commit ID |
---|---|---|---|
U-Boot | https://github.com/varigit/uboot-imx | lf-5.4.y_v2019.04_var01 | bcdb05a53ea1946cb218cce784946fd03846b89d |
Kernel | https://github.com/varigit/linux-imx | lf-5.4.y_var01 | b40ccfdb73ea624fed5b98ff56ce494e8807392c |
meta-variscite-imx | https://github.com/varigit/meta-variscite-imx | zeus-imx-5.4.3-var01 | 9ff250bc754f0beca60ebae3231c0e29cf7e53e4 |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Change List | Description |
---|---|
Release 1.2 | |
U-Boot: Fixed Ethernet issues | |
U-Boot: Re-added SPL and support for 2/8 GB RAM | |
SCFW: Upgraded to version 1.2.10 | |
kernel: Added support for resuming from suspend using touch/GPIOs | |
meta-layer: Updated bc43xx Bluetooth/Wi-Fi firmware to 8.2.0.16 | |
Release 1.1 | |
Ethernet phy1 fix for Symphony-Board rev. 1.4 | |
Release 1.0 | |
Initial Yocto Zeus release for VAR-SOM-MX8 and SPEAR-MX8 | |
Known Issues | |
HDMI and DP suspend/resume crash | Using HDMI or DP display, resume from suspend ends up in a kernel crash |
USB Type-A ports are not supported in U-Boot on SPEAR-MX8 | U-Boot USB driver does not recognize USB devices behind the hub |