Yocto Platform Customization: Difference between revisions

From Variscite Wiki
(Add new release 1.3 for DART-6UL)
 
Line 1: Line 1:
= Yocto =
= Yocto =
== Documentation ==
== Documentation ==
=== Kirkstone 4.0 ===
<section begin=YOCTO_DOC_4.0/>
* Yocto Project Core - Kirkstone 4.0
Documentation is available from [https://docs.yoctoproject.org/4.0/ref-manual/index.html www.docs.yoctoproject.org]
<section end=YOCTO_DOC_4.0/>
=== Hardknott 3.3 ===
<!-- Beginning from Yocto Hardknott 3.3 the URL for the documentation changed from https://www.yoctoproject.org/docs/<version>/ref-manual/ref-manual.html
    to https://docs.yoctoproject.org/<version>/ref-manual/index.html -->
<section begin=YOCTO_DOC_3.3/>
* Yocto Project Core - Hardknott 3.3
Documentation is available from [https://docs.yoctoproject.org/3.3/ref-manual/index.html www.docs.yoctoproject.org]
<section end=YOCTO_DOC_3.3/>
=== Dunfell 3.1 ===
<section begin=YOCTO_DOC_3.1/>
* Yocto Project Core - Dunfell 3.1
Documentation is available from [https://www.yoctoproject.org/docs/3.1/ref-manual/ref-manual.html www.yoctoproject.org]
<section end=YOCTO_DOC_3.1/>
=== Thud 2.6.2 ===
<section begin=YOCTO_DOC_2.6.2/>
* Yocto Project Core - Thud 2.6.2
Documentation is available from [https://www.yoctoproject.org/docs/2.6.2/ref-manual/ref-manual.html www.yoctoproject.org]
<section end=YOCTO_DOC_2.6.2/>
=== Sumo 2.5 ===
<section begin=YOCTO_DOC_2.5/>
* Yocto Project Core - Sumo 2.5
Documentation is available from [https://www.yoctoproject.org/docs/2.5/ref-manual/ref-manual.html www.yoctoproject.org]
<section end=YOCTO_DOC_2.5/>
=== Rocko 2.4.3 ===
<section begin=YOCTO_DOC_2.4.3/>
* Yocto Project Core - Rocko 2.4.3
Documentation is available from [https://www.yoctoproject.org/docs/2.4.3/ref-manual/ref-manual.html www.yoctoproject.org]
<section end=YOCTO_DOC_2.4.3/>
=== Rocko 2.4.1 ===
<section begin=YOCTO_DOC_2.4.1/>
* Yocto Project Core - Rocko 2.4.1
Documentation is available from [https://www.yoctoproject.org/docs/2.4.1/ref-manual/ref-manual.html www.yoctoproject.org]
<section end=YOCTO_DOC_2.4.1/>
=== Rocko 2.4 ===
<section begin=YOCTO_DOC_2.4/>
* Yocto Project Core - Rocko 2.4
Documentation is available from [https://www.yoctoproject.org/docs/2.4/ref-manual/ref-manual.html www.yoctoproject.org]
<section end=YOCTO_DOC_2.4/>
=== Pyro 2.3.1 ===
=== Pyro 2.3.1 ===
<section begin=YOCTO_DOC_2.3.1/>
<section begin=YOCTO_DOC_2.3.1/>
Line 11: Line 53:
Documentation is available from [https://www.yoctoproject.org/docs/2.2.1/ref-manual/ref-manual.html www.yoctoproject.org]
Documentation is available from [https://www.yoctoproject.org/docs/2.2.1/ref-manual/ref-manual.html www.yoctoproject.org]
<section end=YOCTO_DOC_2.2.1/>
<section end=YOCTO_DOC_2.2.1/>
=== FSLC BSP 2.5 ===
<section begin=YOCTO_DOC_FSLC_BSP_2.5/>
* FSL Community BSP Release Notes 2.5 documentation
Documentation is available from [http://freescale.github.io/doc/release-notes/2.5/ http://freescale.github.io]
<section end=YOCTO_DOC_FSLC_BSP_2.5/>
=== FSLC BSP 2.4 ===
<section begin=YOCTO_DOC_FSLC_BSP_2.4/>
* FSL Community BSP Release Notes 2.4 documentation
Documentation is available from [http://freescale.github.io/doc/release-notes/2.4/ http://freescale.github.io]
<section end=YOCTO_DOC_FSLC_BSP_2.4/>
=== FSLC BSP 2.3 ===
<section begin=YOCTO_DOC_FSLC_BSP_2.3/>
* FSL Community BSP Release Notes 2.3 documentation
Documentation is available from [http://freescale.github.io/doc/release-notes/2.3/ http://freescale.github.io]
<section end=YOCTO_DOC_FSLC_BSP_2.3/>
=== FSLC BSP 2.2 ===
=== FSLC BSP 2.2 ===
<section begin=YOCTO_DOC_FSLC_BSP_2.2/>
<section begin=YOCTO_DOC_FSLC_BSP_2.2/>
Line 16: Line 73:
Documentation is available from [http://freescale.github.io/doc/release-notes/2.2/ http://freescale.github.io]
Documentation is available from [http://freescale.github.io/doc/release-notes/2.2/ http://freescale.github.io]
<section end=YOCTO_DOC_FSLC_BSP_2.2/>
<section end=YOCTO_DOC_FSLC_BSP_2.2/>
=== FSL BSP L4.9.88_2.0.0-ga ===
<section begin=YOCTO_DOC_FSL_BSP_4.9.88_2.0.0-ga/>
*Kernel documentation from fsl-yocto-L4.9.88_2.0.0-ga release
Documentation is available for download from fsl-yocto-imx-4.9.88_2.0.0-docs
<section end=YOCTO_DOC_FSL_BSP_4.9.88_2.0.0-ga/>
=== FSL BSP L4.9.11_1.0.0-ga ===
<section begin=YOCTO_DOC_FSL_BSP_4.9.11_1.0.0-ga/>
*Kernel documentation from fsl-yocto-L4.9.11_1.0.0-ga release
Documentation is available for download from fsl-yocto-imx-4.9.11_1.0.0-docs
<section end=YOCTO_DOC_FSL_BSP_4.9.11_1.0.0-ga/>
=== FSL BSP L4.1.15_2.0.0-ga ===
=== FSL BSP L4.1.15_2.0.0-ga ===
<section begin=YOCTO_DOC_FSL_BSP_L4.1.15_2.0.0-ga/>
<section begin=YOCTO_DOC_FSL_BSP_L4.1.15_2.0.0-ga/>
Line 21: Line 88:
Documentation is available for download from fsl-yocto-imx-4.1.15_2.0.0-docs
Documentation is available for download from fsl-yocto-imx-4.1.15_2.0.0-docs
<section end=YOCTO_DOC_FSL_BSP_L4.1.15_2.0.0-ga/>
<section end=YOCTO_DOC_FSL_BSP_L4.1.15_2.0.0-ga/>
== Scripts ==
=== Code::Blocks ===
<section begin=SCRIPT_CODEBLOCKS_VAR_SDK/>
<syntaxhighlight lang="bash">
TARGET_DIR="/home/root"
TARGET_IP="192.168.73.165"
TARGET_PORT="3000"
SSH_OPTIONS="-oStrictHostKeyChecking=no"
</syntaxhighlight>
<section end=SCRIPT_CODEBLOCKS_VAR_SDK/>
<section begin=SCRIPT_CODEBLOCKS_VAR_SDK_DEPLOY/>
<syntaxhighlight lang="bash">
#!/bin/bash
readonly PROGRAM="$1"
PROGRAMNAME="$(basename $PROGRAM)"
. /home/user/bin/var-sdk.conf
echo "Deploying to target"
# prevent "Host key verification failed"
ssh-keygen -f "${HOME}/.ssh/known_hosts" -R "${TARGET_IP}"
# delete old binary
ssh ${SSH_OPTIONS} root@${TARGET_IP} "sh -c 'rm -rf ${TARGET_DIR}/${PROGRAMNAME}'"
# send the program to the target
scp ${PROGRAM} root@${TARGET_IP}:${TARGET_DIR}/${PROGRAMNAME}
</syntaxhighlight>
<section end=SCRIPT_CODEBLOCKS_VAR_SDK_DEPLOY/>
<section begin=SCRIPT_CODEBLOCKS_VAR_SDK_DEBUG/>
<syntaxhighlight lang="bash">
#!/bin/bash
readonly PROGRAM="$1"
PROGRAMNAME="$(basename $PROGRAM)"
. /home/user/bin/var-sdk.conf
echo "Starting GDB Server on Target"
# kill gdbserver on target
ssh ${SSH_OPTIONS} root@${TARGET_IP} "sh -c '/usr/bin/killall -q gdbserver'"
# start gdbserver on target and fork
ssh ${SSH_OPTIONS} -t root@${TARGET_IP} "sh -c 'XDG_RUNTIME_DIR=/run/user/0 gdbserver localhost:${TARGET_PORT} ${TARGET_DIR}/${PROGRAMNAME}'" &
</syntaxhighlight>
<section end=SCRIPT_CODEBLOCKS_VAR_SDK_DEBUG/>


= VAR-SOM-MX6 =
= VAR-SOM-MX6 =
Line 29: Line 148:
|-
|-
! scope="col" | Image Name<br/>
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
! scope="col" | Description<br/>
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.  
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.  
|-
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card or NAND flash.
| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|-
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
Line 57: Line 170:
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for NAND flash.
| style="padding: 5px;"| SPL built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
|-
|}
|}
Line 68: Line 187:
! scope="col" | Evaluation Kit name<br/>
! scope="col" | Evaluation Kit name<br/>
|-
|-
| style="padding: 5px;"| uImage-imx6q-var-som-cap.dtb
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6q-var-som-cap.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| VAR-MX6CustomBoard
Line 74: Line 193:
| style="padding: 5px;"| VAR-DVK-MX6_V2-PRO<br>VAR-STK-MX6_V2
| style="padding: 5px;"| VAR-DVK-MX6_V2-PRO<br>VAR-STK-MX6_V2
|-
|-
| style="padding: 5px;"| uImage-imx6q-var-som-res.dtb
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6q-var-som-res.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| VAR-MX6CustomBoard
Line 80: Line 199:
| style="padding: 5px;"| VAR-DVK-MX6_V2-PRO<br>VAR-STK-MX6_V2
| style="padding: 5px;"| VAR-DVK-MX6_V2-PRO<br>VAR-STK-MX6_V2
|-
|-
| style="padding: 5px;"| uImage-imx6q-var-som-vsc.dtb
{{#if:{{#var:YOCTO_BUILD_SUPPORT_SYMPHONY}}|
{{!}} style="padding: 5px;"{{!}} {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6q-var-som-symphony.dtb
{{!}} style="padding: 5px;"{{!}} VAR-SOM-MX6_V2 (Quad / Dual)
{{!}} style="padding: 5px;"{{!}} Symphony-Board
{{!}} style="padding: 5px;"{{!}} Capacitive LVDS touch
{{!}} style="padding: 5px;"{{!}} N/A
|}}
|-
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6q-var-som-vsc.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
| style="padding: 5px;"| VAR-SOM-MX6_V2 (Quad / Dual)
| style="padding: 5px;"| VAR-SOLOCustomBoard
| style="padding: 5px;"| VAR-SOLOCustomBoard
Line 86: Line 213:
| style="padding: 5px;"| N/A
| style="padding: 5px;"| N/A
|-
|-
| style="padding: 5px;"| uImage-imx6dl-var-som-cap.dtb
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-cap.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite/ Solo)
| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite / Solo)
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| Capacitive touch
| style="padding: 5px;"| Capacitive touch
| style="padding: 5px;"| N/A
| style="padding: 5px;"| N/A
|-
|-
| style="padding: 5px;"| uImage-imx6dl-var-som-res.dtb
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-res.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite/ Solo)
| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite / Solo)
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| Resistive touch
| style="padding: 5px;"| Resistive touch
| style="padding: 5px;"| N/A
| style="padding: 5px;"| N/A
|-
|-
| style="padding: 5px;"| uImage-imx6dl-var-som-vsc.dtb
{{#if:{{#var:YOCTO_BUILD_SUPPORT_SYMPHONY}}|
| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite/ Solo)
{{!}} style="padding: 5px;"{{!}} {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-symphony.dtb
{{!}} style="padding: 5px;"{{!}} VAR-SOM-MX6_V2 (DualLite / Solo)
{{!}} style="padding: 5px;"{{!}} Symphony-Board
{{!}} style="padding: 5px;"{{!}} Capacitive LVDS touch
{{!}} style="padding: 5px;"{{!}} N/A
|}}
|-
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-vsc.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (DualLite / Solo)
| style="padding: 5px;"| VAR-SOLOCustomBoard
| style="padding: 5px;"| VAR-SOLOCustomBoard
| style="padding: 5px;"| Capacitive LVDS touch
| style="padding: 5px;"| Capacitive LVDS touch
| style="padding: 5px;"| N/A
| style="padding: 5px;"| N/A
|-
|-
| style="padding: 5px;"| uImage-imx6dl-var-som-solo-vsc.dtb
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6qp-var-som-cap.dtb
| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
| style="padding: 5px;"| VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| Capacitive touch
| style="padding: 5px;"| N/A
|-
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6qp-var-som-res.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| Resistive touch
| style="padding: 5px;"| N/A
|-
{{#if:{{#var:YOCTO_BUILD_SUPPORT_SYMPHONY}}|
{{!}} style="padding: 5px;"{{!}} {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6qp-var-som-symphony.dtb
{{!}} style="padding: 5px;"{{!}} VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
{{!}} style="padding: 5px;"{{!}} Symphony-Board
{{!}} style="padding: 5px;"{{!}} Capacitive LVDS touch
{{!}} style="padding: 5px;"{{!}} N/A
|}}
|-
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6qp-var-som-vsc.dtb
| style="padding: 5px;"| VAR-SOM-MX6_V2 (QuadPlus / DualPlus)
| style="padding: 5px;"| VAR-SOLOCustomBoard
| style="padding: 5px;"| VAR-SOLOCustomBoard
| style="padding: 5px;"| Capacitive LVDS touch
| style="padding: 5px;"| Capacitive LVDS touch
| style="padding: 5px;"| VAR-DVK-SOLO/DUAL<br>VAR-STK-SOLO/DUAL
| style="padding: 5px;"| N/A
|-
|-
| style="padding: 5px;"| uImage-imx6dl-var-som-solo-cap.dtb
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-solo-cap.dtb
| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| VAR-MX6CustomBoard
Line 116: Line 271:
| style="padding: 5px;"| N/A
| style="padding: 5px;"| N/A
|-
|-
| style="padding: 5px;"| uImage-imx6dl-var-som-solo-res.dtb
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-solo-res.dtb
| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
| style="padding: 5px;"| VAR-MX6CustomBoard
| style="padding: 5px;"| VAR-MX6CustomBoard
Line 122: Line 277:
| style="padding: 5px;"| N/A
| style="padding: 5px;"| N/A
|-
|-
| style="padding: 5px;"| uImage-imx6q-var-dart.dtb
{{#if:{{#var:YOCTO_BUILD_SUPPORT_SYMPHONY}}|
{{!}} style="padding: 5px;"{{!}} {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-solo-symphony.dtb
{{!}} style="padding: 5px;"{{!}} VAR-SOM-SOLO / VAR-SOM-DUAL
{{!}} style="padding: 5px;"{{!}} Symphony-Board
{{!}} style="padding: 5px;"{{!}} Capacitive LVDS touch
{{!}} style="padding: 5px;"{{!}} N/A
|}}
|-
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6dl-var-som-solo-vsc.dtb
| style="padding: 5px;"| VAR-SOM-SOLO / VAR-SOM-DUAL
| style="padding: 5px;"| VAR-SOLOCustomBoard
| style="padding: 5px;"| Capacitive LVDS touch
| style="padding: 5px;"| VAR-DVK-SOLO/DUAL<br>VAR-STK-SOLO/DUAL
|-
| style="padding: 5px;"| {{#varexists:YOCTO_BUILD_RESULTS_DTB_PREFIX|{{#var:YOCTO_BUILD_RESULTS_DTB_PREFIX}}|uImage-}}imx6q-var-dart.dtb
| style="padding: 5px;"| DART-MX6
| style="padding: 5px;"| DART-MX6
| style="padding: 5px;"| VAR-DT6CustomBoard
| style="padding: 5px;"| VAR-DT6CustomBoard
Line 131: Line 300:
<section end=VAR-SOM-MX6_BUILD_RESULTS/>
<section end=VAR-SOM-MX6_BUILD_RESULTS/>


== Device tree ==
== Device trees ==
<section begin=VAR-SOM-MX6_DTB/>
<section begin=VAR-SOM-MX6_DTB/>
<pre>
<pre>
Build the device tree for Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
Build individual device trees:
 
Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb
$ make -j4 imx6dl-var-som-cap.dtb


Build the device tree for Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb
$ make -j4 imx6dl-var-som-res.dtb


Build the device tree for Dualite/Solo on VAR-SOLOCustomBoard:
Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb
$ make -j4 imx6dl-var-som-vsc.dtb


Build the device tree for Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb
$ make -j4 imx6q-var-som-cap.dtb


Build the device tree for Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb
$ make -j4 imx6q-var-som-res.dtb


Build the device tree for Quad/Dual on VAR-SOLOCustomBoard:
Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb
$ make -j4 imx6q-var-som-vsc.dtb
Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb
Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb
Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb


Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
Line 165: Line 345:
</pre>
</pre>
<section end=VAR-SOM-MX6_DTB/>
<section end=VAR-SOM-MX6_DTB/>
== Device trees with Symphony-Board ==
<section begin=VAR-SOM-MX6_WITH_SYMPHONY_DTB/>
<pre>
Build individual device trees:
Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb
Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb
Build the device tree for VAR-SOM-MX6 Dualite/Solo on Symphony-Board:
$ make -j4 imx6dl-var-som-symphony.dtb
Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb
Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb
Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb
Build the device tree for VAR-SOM-MX6 Quad/Dual on Symphony-Board:
$ make -j4 imx6q-var-som-symphony.dtb
Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb
Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb
Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb
Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on Symphony-Board:
$ make -j4 imx6qp-var-som-symphony.dtb
Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb
Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-solo-cap.dtb
Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-solo-res.dtb
Build the device tree for VAR-SOM-SOLO on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-solo-vsc.dtb
Build the device tree for VAR-SOM-SOLO on Symphony-Board:
$ make -j4 imx6dl-var-som-solo-symphony.dtb
Build the device tree for DART-MX6:
$ make -j4 imx6q-var-dart.dtb
</pre>
<section end=VAR-SOM-MX6_WITH_SYMPHONY_DTB/>


== SD card image file tree ==
== SD card image file tree ==
Line 183: Line 421:
     ├── imx6q-var-som-res.dtb
     ├── imx6q-var-som-res.dtb
     ├── imx6q-var-som-vsc.dtb
     ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-vsc.dtb
     ├── rootfs.tar.gz
     ├── rootfs.tar.gz
     ├── rootfs_128kbpeb.ubi
     ├── rootfs_128kbpeb.ubi
Line 191: Line 432:
</pre>
</pre>
<section end=VAR-SOM-MX6_SD_TREE/>
<section end=VAR-SOM-MX6_SD_TREE/>
== SD card image file tree with Symphony-Board ==
<section begin=VAR-SOM-MX6_WITH_SYMPHONY_SD_TREE/>
<pre>
/opt/images/
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-symphony.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-symphony.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-symphony.dtb
    ├── imx6qp-var-som-vsc.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage
</pre>
<section end=VAR-SOM-MX6_WITH_SYMPHONY_SD_TREE/>


== Flash Recovery SD from GUI ==  
== Flash Recovery SD from GUI ==  
<section begin=VAR-SOM-MX6_FLASH_SD_FROM_GUI/>
<section begin=VAR-SOM-MX6_FLASH_SD_FROM_GUI/>
=== Flash from GUI ===
[[File:VAR-SOM-MX6_Pyro_Recovery.png]]
[[File:VAR-SOM-MX6_Pyro_Recovery.png]]
<br><br>
<br><br>
Line 202: Line 476:
* Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
* Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
* Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
* Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
* Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard].
* Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on [http://www.variscite.com/products/single-board-computers/var-mx6customboard VAR-MX6CustomBoard]
* Install Yocto DART (eMMC): Flash Yocto on eMMC, on [http://www.variscite.com/products/single-board-computers/dt6customboard VAR-DT6CustomBoard]<section end=VAR-SOM-MX6_FLASH_SD_FROM_GUI/>
* Install Yocto DART (eMMC): Flash Yocto on eMMC, on [http://www.variscite.com/products/single-board-computers/dt6customboard VAR-DT6CustomBoard]
<section end=VAR-SOM-MX6_FLASH_SD_FROM_GUI/>
 
<section begin=VAR-SOM-MX6_FLASH_SD_FROM_GUI_WAYLAND/>
=== Flash from GUI ===
For this Yocto release, NXP/Vivante do no longer provide GPU accelerations for X11 native backend.
 
The default backend is now XWayland: Wayland accelerated backend with basic (not accelerated) X11 emulation.
 
Only "Flash from command line" is supported.
<section end=VAR-SOM-MX6_FLASH_SD_FROM_GUI_WAYLAND/>


== Setting the Boot Mode ==
== Setting the Boot Mode ==
Line 242: Line 526:
*Power-up board
*Power-up board
*The board will automatically boot into Linux from SD card
*The board will automatically boot into Linux from SD card
{{#if:{{#var:YOCTO_BUILD_SUPPORT_SYMPHONY}}|
=== Symphony-Board ===
Booting your system requires switching the relevant DIP switch to "Boot from SD card". See picture below.
[[File:SymphonySwitches.jpg|thumb|none|upright=2.0]]
To boot board with SD card, Follow the steps below:<br>
*Power-off the board.
*Insert the SD card into the SD/MMC slot of the carrier board (DVK)
*Switch the SW3 DIP switch to "Boot from SD"
*Switch the SW6 DIP switch to "PWR Select for MX6"
{{Note| Leaving SW6 in the wrong (MX8) position may lead to serious SoM damages.}}
*Power-up board
*The board will automatically boot into Linux from SD card
|}}
<section end=VAR-SOM-MX6_BOOT_BOARD/>
<section end=VAR-SOM-MX6_BOOT_BOARD/>


= DART-6UL=
= DART-6UL=
== Build Results ==
== Build Results ==
<section begin=DART-6UL_BUILD_RESULTS_MORTY/>
<section begin=DART-6UL_BUILD_RESULTS_MORTY/>
Line 253: Line 552:
! scope="col" | How to use<br/>
! scope="col" | How to use<br/>
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.sdcard
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.ubi
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash.
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash.
|-
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card or NAND flash.
| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|-
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
Line 276: Line 569:
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for NAND flash.
| style="padding: 5px;"| SPL built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
|-
|}
|}
Line 317: Line 616:
! scope="col" | How to use<br/>
! scope="col" | How to use<br/>
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB  
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB  
|-
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card or NAND flash.
| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|-
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
Line 343: Line 636:
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for NAND flash.
| style="padding: 5px;"| SPL built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
|-
|}
|}
Line 389: Line 688:
|}
|}
<section end=DART-6UL_BUILD_RESULTS/>
<section end=DART-6UL_BUILD_RESULTS/>
<section begin=DART-6UL_BUILD_RESULTS_THUD_1_1_PLUS/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
|-
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
|}
{| class="wikitable"
|-
! scope="col" | File Name
! scope="col" | Description
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
|}
<section end=DART-6UL_BUILD_RESULTS_THUD_1_1_PLUS/>
<section begin=DART-6UL_BUILD_RESULTS_ZEUS_V1/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
|-
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
|}
{| class="wikitable"
|-
! scope="col" | File Name
! scope="col" | Description
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-concerto-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-concerto-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-concerto-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-symphony-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-symphony-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-symphony-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ull-var-som-symphony-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-symphony-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-symphony-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-symphony-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ul-var-som-symphony-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-symphony-board-emmc-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-symphony-board-emmc-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-symphony-board-nand-sd-card.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
|-
| style="padding: 5px;"| imx6ulz-var-som-symphony-board-nand-wifi.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
|-
|}
<section end=DART-6UL_BUILD_RESULTS_ZEUS_V1/>


== Device tree ==
== Device tree ==
<section begin=DART-6UL_DTB/>
<section begin=DART-6UL_DTB/>
<pre>
<pre>
Build only the device tree for DART-6UL with eMMC and WiFi:
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb


Build only the device tree for DART-6UL with eMMC and SD card:
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb
$ make -j4 imx6ul-var-dart-sd_emmc.dtb


Build only the device tree for DART-6UL with NAND flash and WiFi:
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb
$ make -j4 imx6ul-var-dart-nand_wifi.dtb


Build only the device tree for DART-6UL with NAND flash and SD card:
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb
$ make -j4 imx6ul-var-dart-sd_nand.dtb


Build only the device tree for DART-6ULL with eMMC and WiFi:
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb


Build only the device tree for DART-6ULL with eMMC and SD card:
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb
$ make -j4 imx6ull-var-dart-sd_emmc.dtb


Build only the device tree for DART-6ULL with NAND flash and WiFi:
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb
$ make -j4 imx6ull-var-dart-nand_wifi.dtb


Build only the device tree for DART-6ULL with NAND flash and SD card:
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb
$ make -j4 imx6ull-var-dart-sd_nand.dtb
</pre>
</pre>
Line 421: Line 986:
<section begin=DART-6UL_DTB_PYRO_PLUS/>
<section begin=DART-6UL_DTB_PYRO_PLUS/>
<pre>
<pre>
Build only the device tree for DART-6UL with eMMC and WiFi:
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb


Build only the device tree for DART-6UL-5G with eMMC and WiFi:
Build only the device tree for DART-6UL-5G with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-5g-emmc_wifi.dtb
$ make -j4 imx6ul-var-dart-5g-emmc_wifi.dtb


Build only the device tree for DART-6UL with eMMC and SD card:
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb
$ make -j4 imx6ul-var-dart-sd_emmc.dtb


Build only the device tree for DART-6UL with NAND flash and WiFi:
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb
$ make -j4 imx6ul-var-dart-nand_wifi.dtb


Build only the device tree for DART-6UL-5G with NAND flash and WiFi:
Build only the device tree for DART-6UL-5G with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-5g-nand_wifi.dtb
$ make -j4 imx6ul-var-dart-5g-nand_wifi.dtb


Build only the device tree for DART-6UL with NAND flash and SD card:
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb
$ make -j4 imx6ul-var-dart-sd_nand.dtb


Build only the device tree for DART-6ULL with eMMC and WiFi:
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb


Build only the device tree for DART-6ULL with eMMC and SD card:
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb
$ make -j4 imx6ull-var-dart-sd_emmc.dtb


Build only the device tree for DART-6ULL-5G with eMMC and WiFi:
Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-5g-emmc_wifi.dtb
$ make -j4 imx6ull-var-dart-5g-emmc_wifi.dtb


Build only the device tree for DART-6ULL with NAND flash and WiFi:
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb
$ make -j4 imx6ull-var-dart-nand_wifi.dtb


Build only the device tree for DART-6ULL-5G with NAND flash and WiFi:
Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-5g-nand_wifi.dtb
$ make -j4 imx6ull-var-dart-5g-nand_wifi.dtb


Build only the device tree for DART-6ULL with NAND flash and SD card:
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb
$ make -j4 imx6ull-var-dart-sd_nand.dtb
</pre>
</pre>
<section end=DART-6UL_DTB_PYRO_PLUS/>
<section end=DART-6UL_DTB_PYRO_PLUS/>
<section begin=DART-6UL_DTB_THUD_1_1_PLUS/>
<pre>
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb
</pre>
<section end=DART-6UL_DTB_THUD_1_1_PLUS/>
<section begin=DART-6UL_DTB_ZEUS_V1/>
<pre>
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-symphony-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-symphony-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-symphony-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-symphony-board-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-symphony-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-symphony-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-symphony-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-symphony-board-nand-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-symphony-board-emmc-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-symphony-board-emmc-wifi.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-symphony-board-nand-sd-card.dtb
Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-symphony-board-nand-wifi.dtb
</pre>
<section end=DART-6UL_DTB_ZEUS_V1/>


== SD card image file tree ==
== SD card image file tree ==
Line 508: Line 1,261:
<section end=DART-6UL_SD_TREE_PYRO_PLUS/>
<section end=DART-6UL_SD_TREE_PYRO_PLUS/>


<section begin=DART-6UL_SD_TREE_SUMO_OR_SUMOPLUS/>
<section begin=DART-6UL_SD_TREE_SUMOPLUS/>
<pre>
<pre>
/opt/images/
/opt/images/
Line 533: Line 1,286:
     └── zImage
     └── zImage
</pre>
</pre>
<section end=DART-6UL_SD_TREE_SUMO_OR_SUMOPLUS/>
<section end=DART-6UL_SD_TREE_SUMOPLUS/>
 
<section begin=DART-6UL_SD_TREE_THUD_1_1_PLUS/>
<pre>
/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage
</pre>
<section end=DART-6UL_SD_TREE_THUD_1_1_PLUS/>
 
<section begin=DART-6UL_SD_TREE_ZEUS_V1/>
<pre>
/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ull-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ull-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ull-var-som-symphony-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ul-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-symphony-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage
</pre>
<section end=DART-6UL_SD_TREE_ZEUS_V1/>


== Flash Recovery SD from GUI ==  
== Flash Recovery SD from GUI ==  
<section begin=DART-6UL_FLASH_SD_FROM_GUI/>
<section begin=DART-6UL_FLASH_SD_FROM_GUI/>
=== Flash from GUI ===
[[File:DART-6UL_Recovery_Sumo.png]]
[[File:DART-6UL_Recovery_Sumo.png]]
<br><br>
<br><br>
Line 546: Line 1,390:


== Setting the Boot Mode ==
== Setting the Boot Mode ==
<section begin=DART-6UL_BOOT_BOARD/>
<section begin=DART-6UL_BOOT_BOARD_NO_CONCERTO/>
Booting your system from an SD card requires switching the Boot DIP switches. See picture below.
Booting your system from an SD card requires switching the Boot DIP switches. See picture below.
[[File:Boot_switch_6ul1.jpg|thumb|none|upright=2.0]]
[[File:Boot_switch_6ul1.jpg|thumb|none|upright=2.0]]
* "00" The current position in the picture will set the system to boot from SD card.
* "00" The current position in the picture will set the system to boot from SD card
* "01" Moving the right switch will set the system to boot from eMMC
* "01" Moving the right switch will set the system to boot from eMMC
* "10" Moving the left switch will set the system to boot from NAND flash
* "10" Moving the left switch will set the system to boot from NAND flash
* "11" is illegal.
* "11" is illegal.
{{Note|Be aware that your system has eMMC or NAND but never both.}}
{{Note|Be aware that your system has eMMC or NAND but never both.}}
<section end=DART-6UL_BOOT_BOARD_NO_CONCERTO/>
<section begin=DART-6UL_BOOT_BOARD/>
Booting your system from an SD card requires switching the Boot DIP switches. See picture below.<br>
'''On the VAR-6ULCustomBoard (with a DART-6UL)''':
[[File:Boot_switch_6ul1.jpg|thumb|none|upright=2.0]]
* "00" The current position in the picture will set the system to boot from SD card
* "01" Moving the right switch will set the system to boot from eMMC
* "10" Moving the left switch will set the system to boot from NAND flash
* "11" is illegal.
{{Note|Be aware that your system has eMMC or NAND but never both.}}<br>
<br>
'''On the Concerto-Board (with a VAR-SOM-6UL)''':
[[File:boot_switch_concerto.jpg|thumb|none|upright=2.0]]
* ON-EXT: Boot from the external storage (SD card) - the current position in the picture
* OFF-INT: Boot from the SOM's internal storage (eMMC/NAND flash)
<section end=DART-6UL_BOOT_BOARD/>
<section end=DART-6UL_BOOT_BOARD/>


== Automatic device Tree selection in U-Boot ==
== Using only one Ethernet port ==
<section begin=DART-6UL_U-BOOT_DT_SELECTION/>
<section begin=DART-6UL_USING_ONE_ETH_PORT_OLD/>
Upon reset you will see the U-Boot SPL printouts. It will print also the SOM configuration:
Apply the following patch to the Linux kernel source, for removing the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:
<br>On-SOM storage: SD only, eMMC, NAND.
 
<br>WIFI if chip exits.
<syntaxhighlight lang="diff">
<br>For example:
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
<pre>
index f79a356..032ed00 100644
U-Boot SPL 2015.10-00532-g482dc88 (Jan 03 2016 - 10:05:42)
--- a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
i.MX6UL SOC
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
Part number: DART-6U-A01
@@ -159,17 +159,6 @@
Assembly: AS11
phy-reset-on-resume;
Date of production: 2015 Dec 31
phy-handle = <&ethphy0>;
DART-6UL configuration: eMMC WIFI
status = "okay";
Ram size: 512
-};
Boot Device: SD
-
</pre>
-&fec2 {
As explained in the above [[#Build_Results | Build Results]] table we have 4 optional configurations.
- pinctrl-names = "default";
<br>We implemented in U-Boot and automatic device tree selection, so when kernel boots, the U-Boot will load the corresponding device tree according to On-SOM configuration.
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rmii";
- phy-handle = <&ethphy1>;
- phy-reset-gpios=<&gpio1 10 1>;
- phy-reset-duration=<100>;
- phy-reset-on-resume;
- status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
@@ -181,14 +170,6 @@
clock-names = "rmii-ref";
reg = <1>;
};
-
- ethphy1: ethernet-phy@3 {
- compatible = "ethernet-phy-ieee802.3-c22";
- micrel,rmii-reference-clock-select-25-mhz;
- clocks = <&rmii_ref_clk>;
- clock-names = "rmii-ref";
- reg = <3>;
- };
};
};
@@ -460,8 +441,8 @@
fsl,pins = <
MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x1b0b0 /* User LED */
MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x17059 /* User Button */
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
#ifdef WIFI
MX6UL_PAD_GPIO1_IO03__REF_CLK_32K 0x03029 /* WLAN Slow Clock */
#endif
@@ -481,20 +462,6 @@
>;
};
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
- MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x1b0b0
- >;
- };
-
pinctrl_flexcan1: flexcan1grp{
fsl,pins = <
MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020
</syntaxhighlight>


{| class="wikitable"
Notes:<br>
|-
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build ''only'' the device trees and copy them to your SD card.<br>
! scope="col" | SOM Type<br/>
- In older kernel releases where there is no imx6ul-imx6ull-var-dart-common.dtsi file, the relevant file to edit is called imx6ul-var-dart.dtsi
! scope="col" | Boot From<br/>
<section end=DART-6UL_USING_ONE_ETH_PORT_OLD/>
! scope="col" | SOM Internal FLASH<br/>
! scope="col" | SOM has WIFI/BT<br/>
! scope="col" | Device Tree selected<br/>
|-
| DART-6UL
| SD
| eMMC
| Don't Care
| imx6ul-var-dart-sd_emmc.dtb
|-
| DART-6UL
| SD
| NAND
| Don't Care
| imx6ul-var-dart-sd_nand.dtb
|-
| DART-6UL
| eMMC
| eMMC
| Yes
| imx6ul-var-dart-emmc_wifi.dtb
|-
| DART-6UL
| eMMC
| eMMC
| NO
| imx6ul-var-dart-sd_emmc.dtb
|-
| DART-6UL
| NAND
| NAND
| YES
| imx6ul-var-dart-nand_wifi.dtb
|-
| DART-6UL
| NAND
| NAND
| NO
| imx6ul-var-dart-sd_nand.dtb
|-
| DART-6ULL
| SD
| eMMC
| Don't Care
| imx6ull-var-dart-sd_emmc.dtb
|-
| DART-6ULL
| SD
| NAND
| Don't Care
| imx6ull-var-dart-sd_nand.dtb
|-
| DART-6ULL
| eMMC
| eMMC
| Yes
| imx6ull-var-dart-emmc_wifi.dtb
|-
| DART-6ULL
| eMMC
| eMMC
| NO
| imx6ull-var-dart-sd_emmc.dtb
|-
| DART-6ULL
| NAND
| NAND
| YES
| imx6ull-var-dart-nand_wifi.dtb
|-
| DART-6ULL
| NAND
| NAND
| NO
| imx6ull-var-dart-sd_nand.dtb
|}


<span style="color:red">Note: Boot from SD card eliminates Wifi</span> as the Wifi and SD card are using same SDIO interface.<br>
<section begin=DART-6UL_USING_ONE_ETH_PORT/>
A typical use-case, is to boot from SD card, flash eMMC or NAND flash, and re-boot form eMMC/NAND to have Wi-Fi operational.
To remove the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:<br>
<section end=DART-6UL_U-BOOT_DT_SELECTION/>
Edit the dtsi file of the reference carrier board in the Linux kernel source and remove the ''&fec1'' and ''&fec2'' nodes from it.<br>
In case of the VAR-6ULCustomBoard (DART-6UL carrier), the file is ''arch/arm/boot/dts/imx6ul-imx6ull-var-dart-6ulcustomboard.dtsi''.<br>
In case of the Concerto-Board (VAR-SOM-6UL carrier), the file is ''arch/arm/boot/dts/imx6ul-imx6ull-var-som-concerto-board.dtsi''.<br>
The above will result in using the ''&fec1'' node from the dtsi file of the SOM, as is (as the phy of the first Ethernet port is on the SOM), without adding the second port (which its phy is on the reference carrier board).
<br>
Notes:<br>
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build ''only'' the device trees and copy them to your SD card.<br>
<section end=DART-6UL_USING_ONE_ETH_PORT/>


= VAR-SOM-MX7=
= VAR-SOM-MX7=
Line 668: Line 1,516:
! scope="col" | How to use<br/>
! scope="col" | How to use<br/>
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_128kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}_256kbpeb.ubi
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
| style="padding: 5px;"| A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
|-
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card or NAND flash.
| style="padding: 5px;"| Linux kernel image, same binary for SD card/eMMC or NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|-
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_SD_IMAGE_NAME}}
Line 694: Line 1,536:
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| {{#var:SPL_NAND_IMAGE_NAME}}
| style="padding: 5px;"| SPL built for NAND flash.
| style="padding: 5px;"| SPL built for NAND flash.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
| style="padding: 5px;"| {{#var:U-BOOT_NAND_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for NAND flash.
|-
|-
|}
|}
Line 791: Line 1,639:
== Flash Recovery SD from GUI ==  
== Flash Recovery SD from GUI ==  
<section begin=VAR-SOM-MX7_FLASH_SD_FROM_GUI/>
<section begin=VAR-SOM-MX7_FLASH_SD_FROM_GUI/>
=== Flash from GUI ===
[[File:VAR-SOM-MX7_Rocko_Recovery.png]]
[[File:VAR-SOM-MX7_Rocko_Recovery.png]]
<br><br>
<br><br>
Line 819: Line 1,668:
! scope="col" | How to use<br/>
! scope="col" | How to use<br/>
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.sdcard.gz
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
| style="padding: 5px;"| fsl-image-gui-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
|-
Line 839: Line 1,688:
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI 4K display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and DCSS LVDS display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI 4K display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
| style="padding: 5px;"| Device tree blob for SD, eMMC and DCSS LVDS display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
| style="padding: 5px;"| Device tree blob for SD, eMMC and LCDIF LVDS display configuration.
|-
|-
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb
| style="padding: 5px;"| Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.
| style="padding: 5px;"| Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration.
|-
|-
|}
|}
<section end=DART-MX8M_BUILD_RESULTS/>
<section end=DART-MX8M_BUILD_RESULTS/>
<section begin=DART-MX8M_BUILD_RESULTS_SUMO_AND_UP/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and LCDIF LVDS display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and LCDIF LVDS display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
|-
|}
<section end=DART-MX8M_BUILD_RESULTS_SUMO_AND_UP/>
<section begin=DART-MX8M_BUILD_RESULTS_SUMO_4_14_98_AND_UP/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and LVDS display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-lvds-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and LVDS display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-sd-lvds-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-lvds-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-wifi-lvds-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and LVDS display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-lvds-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and LVDS display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-sd-lvds-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and LVDS display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-lvds-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | Image.gz-fsl-imx8mq-var-dart }}-m4-wifi-lvds-hdmi-cb12.dtb
| style="padding: 5px;"| DTB for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
|-
|}
<section end=DART-MX8M_BUILD_RESULTS_SUMO_4_14_98_AND_UP/>
<section begin=DART-MX8M_BUILD_RESULTS_DUNFELL_11_5_4_85/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.wic.gz
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-sd-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-sd-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-wifi-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-wifi-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-sd-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-sd-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-wifi-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-wifi-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard}}-legacy-m4-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display.
|-
|}
<section end=DART-MX8M_BUILD_RESULTS_DUNFELL_11_5_4_85/>
<section begin=DART-MX8M_BUILD_RESULTS_MICKLEDORE/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.wic.zst
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.zst
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_SD_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with WIFI and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with M4, SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with M4, SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with M4, SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with M4, WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with M4, WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard with M4, WIFI and dual LVDS+HDMI display.
|-
|}
<section end=DART-MX8M_BUILD_RESULTS_MICKLEDORE/>
== Basler Camera ==
=== local.conf ===
<section begin=DART-MX8M_BASLER_LOCALCONF_SUMO/>
IMAGE_INSTALL_append = " \
basler-camera-driver \
pylon \
python3-pypylon \
gentl-producer \
xauth \
"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-basler-camera-driver"
<section end=DART-MX8M_BASLER_LOCALCONF_SUMO/>
<section begin=DART-MX8M_BASLER_LOCALCONF_HARDKNOTT/>
ACCEPT_BASLER_EULA = "1"
IMAGE_INSTALL_append = "packagegroup-dart-bcon-mipi"
<section end=DART-MX8M_BASLER_LOCALCONF_HARDKNOTT/>
== E-con Camera ==
=== local.conf ===
<section begin=DART-MX8M_ECON_LOCALCONF_SUMO/>
IMAGE_INSTALL_append = " \
        econ-camera-driver \
"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-econ-camera-driver"
<section end=DART-MX8M_ECON_LOCALCONF_SUMO/>


== Device tree ==
== Device tree ==
<section begin=DART-MX8M_DTB/>
<section begin=DART-MX8M_DTB/>
<pre>
<pre>
Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI display:
Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi.dtb
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi.dtb


Build only the device tree for DART-MX8M configuration with eMMC, WIFI and HDMI 4K display:
Build only the device tree for DART-MX8M with WIFI and HDMI 4K display support:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi-4k.dtb


Build only the device tree for DART-MX8M configuration with eMMC, WIFI and DCSS LVDS display:
Build only the device tree for DART-MX8M with WIFI and DCSS LVDS display support:
$ make -j4 imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
$ make -j4 imx8m-var-dart-emmc-wifi-dcss-lvds.dtb


Build only the device tree for DART-MX8M configuration with eMMC, WIFI and LCDIF LVDS display:
Build only the device tree for DART-MX8M with WIFI and LCDIF LVDS display support:
$ make -j4 imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
$ make -j4 imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb


Build only the device tree for DART-MX8M configuration with eMMC, WIFI and dual LVDS+HDMI display:
Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 imx8m-var-dart-emmc-wifi-dual-display.dtb
$ make -j4 imx8m-var-dart-emmc-wifi-dual-display.dtb


Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI display:
Build only the device tree for DART-MX8M with SD, and HDMI display support:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi.dtb
$ make -j4 imx8m-var-dart-sd-emmc-hdmi.dtb


Build only the device tree for DART-MX8M configuration with SD, eMMC, and HDMI 4K display:
Build only the device tree for DART-MX8M with SD, and HDMI 4K display support:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi-4k.dtb
$ make -j4 imx8m-var-dart-sd-emmc-hdmi-4k.dtb


Build only the device tree for DART-MX8M configuration with SD, eMMC, and DCSS LVDS display:
Build only the device tree for DART-MX8M with SD, and DCSS LVDS display support:
$ make -j4 imx8m-var-dart-sd-emmc-dcss-lvds.dtb
$ make -j4 imx8m-var-dart-sd-emmc-dcss-lvds.dtb


Build only the device tree for DART-MX8M configuration with SD, eMMC, and LCDIF LVDS display:
Build only the device tree for DART-MX8M with SD, and LCDIF LVDS display support:
$ make -j4 imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
$ make -j4 imx8m-var-dart-sd-emmc-lcdif-lvds.dtb


Build only the device tree for DART-MX8M configuration with SD, eMMC, and dual LVDS+HDMI display:
Build only the device tree for DART-MX8M with SD, and dual LVDS+HDMI display support:
$ make -j4 imx8m-var-dart-sd-emmc-dual-display.dtb
$ make -j4 imx8m-var-dart-sd-emmc-dual-display.dtb


</pre>
</pre>
<section end=DART-MX8M_DTB/>
<section end=DART-MX8M_DTB/>
<section begin=DART-MX8M_DTB_SUMO_PLUS/>
<pre>
Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb
Build only the device tree for DART-MX8M with SD, and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb
Build only the device tree for DART-MX8M with SD, and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
Build only the device tree for DART-MX8M with SD, and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb
</pre>
<section end=DART-MX8M_DTB_SUMO_PLUS/>
<section begin=DART-MX8M_DTB_SUMO_4_14_98_PLUS/>
<pre>
Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-dp.dtb
Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-hdmi.dtb
Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds.dtb
Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-dp.dtb
Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-hdmi.dtb
Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds.dtb
Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-dp.dtb
Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-hdmi.dtb
Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds.dtb
Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-dp.dtb
Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb
Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds.dtb
Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb
</pre>
<section end=DART-MX8M_DTB_SUMO_4_14_98_PLUS/>
<section begin=DART-MX8M_DTB_ZEUS_5_4_24_PLUS/>
<pre>
Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-sd-dp.dtb
Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-sd-hdmi.dtb
Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds.dtb
Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-dp.dtb
Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-hdmi.dtb
Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds.dtb
Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-dp.dtb
Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-hdmi.dtb
Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds.dtb
Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-dp.dtb
Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-hdmi.dtb
Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds.dtb
Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb
</pre>
<section end=DART-MX8M_DTB_ZEUS_5_4_24_PLUS/>
<section begin=DART-MX8M_DTB_DUNFELL_5_4_85/>
<pre>
Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-dp.dtb
Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb
Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb
Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-dp.dtb
Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb
Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb
Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-dp.dtb
Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb
Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb
Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-dp.dtb
Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb
Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb
Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb
</pre>
<section end=DART-MX8M_DTB_DUNFELL_5_4_85/>
<section begin=DART-MX8M_DTB_DUNFELL_11_5_4_85/>
<pre>
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb
</pre>
<section end=DART-MX8M_DTB_DUNFELL_11_5_4_85/>
<section begin=DART-MX8M_DTB_MICKLEDORE/>
<pre>
Build only the device tree for DART-MX8M on DT8MCustomBoard with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb
Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb
</pre>
<section end=DART-MX8M_DTB_MICKLEDORE/>


== SD card image file tree ==
== SD card image file tree ==
Line 917: Line 2,515:
</pre>
</pre>
<section end=DART-MX8M_SD_TREE/>
<section end=DART-MX8M_SD_TREE/>
== SD card image file tree ==
<section begin=DART-MX8M_SD_TREE_SUMO_4_14_98_PLUS/>
<pre>
/opt/images/
└── Yocto
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_dp_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk_no_hdmi
    ├── imx-boot-sd.bin -> imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    └── rootfs.tar.gz
</pre>
<section end=DART-MX8M_SD_TREE_SUMO_4_14_98_PLUS/>
<section begin=DART-MX8M_FDT_TABLE_MORTY/>
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-hdmi.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-hdmi-4k.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-dcss-lvds.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-emmc-wifi-dual-display.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-sd-emmc-hdmi.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-sd-emmc-hdmi-4k.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-sd-emmc-dcss-lvds.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-sd-emmc-lcdif-lvds.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
|-
| style="padding: 5px;"| imx8m-var-dart-sd-emmc-dual-display.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.
|-
|}
<section end=DART-MX8M_FDT_TABLE_MORTY/>
<section begin=DART-MX8M_FDT_TABLE_SUMO_PLUS/>
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
|-
| style="padding: 5px;"| fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
|-
| style="padding: 5px;"| fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
|-
| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
|-
| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-emmc-lvds.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and LVDS display configuration. WIFI disabled.
|-
| style="padding: 5px;"| fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.
|-
|}
<section end=DART-MX8M_FDT_TABLE_SUMO_PLUS/>
<section begin=DART-MX8M_FDT_TABLE_SUMO_4_14_98_PLUS/>
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-sd-dp.dtb
| style="padding: 5px;"| Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-sd-hdmi.dtb
| style="padding: 5px;"| Device tree blob for eMMC, SD and HDMI display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-sd-lvds.dtb
| style="padding: 5px;"| Device tree blob for eMMC, SD and LVDS display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-sd-lvds-dp.dtb
| style="padding: 5px;"| Device tree blob for eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-sd-lvds-hdmi.dtb
| style="padding: 5px;"| Device tree blob for eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-wifi-dp.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and DP display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-wifi-hdmi.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-wifi-lvds.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-wifi-lvds-dp.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-sd-dp.dtb
| style="padding: 5px;"| Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-sd-hdmi.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and HDMI display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-sd-lvds.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and LVDS display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-sd-lvds-dp.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-sd-lvds-hdmi.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-wifi-dp.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and DP display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-wifi-hdmi.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and HDMI display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-wifi-lvds.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and LVDS display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-wifi-lvds-dp.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | fsl-imx8mq-var-dart }}-m4-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| Device tree blob for M4, eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
|-
|}
<section end=DART-MX8M_FDT_TABLE_SUMO_4_14_98_PLUS/>
<section begin=DART-MX8M_FDT_TABLE_DUNFELL_11_5_4_85/>
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-m4-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-sd-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-sd-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-wifi-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-wifi-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-sd-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-sd-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-sd-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-sd-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-sd-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-wifi-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-wifi-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-wifi-lvds.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-wifi-lvds-dp.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX | imx8mq-var-dart-dt8mcustomboard }}-legacy-m4-wifi-lvds-hdmi.dtb
| style="padding: 5px;"| DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display.
|-
|}
<section end=DART-MX8M_FDT_TABLE_DUNFELL_11_5_4_85/>


== Setting the Boot Mode ==
== Setting the Boot Mode ==
Line 928: Line 2,781:
<section end=DART-MX8M_BOOT_BOARD/>
<section end=DART-MX8M_BOOT_BOARD/>


=Platform Customizations=
= DART-MX8M-MINI =
== VAR-SOM-MX6 ==
== Build Results ==
<section begin=DART-MX8M-MINI_BUILD_RESULTS/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| fsl-imx8mm-var-dart.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI
|-
| style="padding: 5px;"| fsl-imx8mm-var-som.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI
|-
| style="padding: 5px;"| fsl-imx8mm-var-som-rev10.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0
|-
|}
<section end=DART-MX8M-MINI_BUILD_RESULTS/>
 
<section begin=DART-MX8M-MINI_BUILD_RESULTS_ZEUS/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| {{#ifexpr: {{#var:YOCTO_VERSION}} > 3.0 | imx8mm-var-dart-customboard.dtb | imx8mm-var-dart.dtb }}
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI
|-
| style="padding: 5px;"| {{#ifexpr: {{#var:YOCTO_VERSION}} > 3.0 | imx8mm-var-som-symphony.dtb | imx8mm-var-som.dtb }}
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI
|-
| style="padding: 5px;"| {{#ifexpr: {{#var:YOCTO_VERSION}} > 3.0 | imx8mm-var-som-rev10-symphony.dtb | imx8mm-var-som-rev10.dtb }}
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0
|-
|}
<section end=DART-MX8M-MINI_BUILD_RESULTS_ZEUS/>
 
<section begin=DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V11/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8mm-var-dart-customboard.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI on DT8MCustomBoard
|-
| style="padding: 5px;"| imx8mm-var-dart-customboard-m4.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard
|-
| style="padding: 5px;"| imx8mm-var-som-symphony.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
|-
| style="padding: 5px;"| imx8mm-var-som-symphony-m4.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above
|-
| style="padding: 5px;"| imx8mm-var-som-symphony-legacy.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
|-
| style="padding: 5px;"| imx8mm-var-som-symphony-legacy-m4.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below
|-
|}
<section end=DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V11/>
 
<section begin=DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V12/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V2.x and above
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard-m4.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V2.x and above
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard-legacy.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V1.x
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V1.x
|-
| style="padding: 5px;"| imx8mm-var-som-symphony.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
|-
| style="padding: 5px;"| imx8mm-var-som-symphony-m4.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above
|-
| style="padding: 5px;"| imx8mm-var-som-symphony-legacy.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
|-
| style="padding: 5px;"| imx8mm-var-som-symphony-legacy-m4.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below
|-
|}
<section end=DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V12/>
 
<section begin=DART-MX8M-MINI_BUILD_RESULTS_KIRKSTONE_V10/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V2.x and above
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard-m4.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V2.x and above
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard-legacy.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V1.x
|-
| style="padding: 5px;"| imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V1.x
|-
| style="padding: 5px;"| imx8mm-var-som-symphony.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board
|-
| style="padding: 5px;"| imx8mm-var-som-symphony-m4.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board
|-
|}
<section end=DART-MX8M-MINI_BUILD_RESULTS_KIRKSTONE_V10/>
 
== Device tree ==
<section begin=DART-MX8M-MINI_DTB/>
<pre>
Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-dart.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-var-som.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/fsl-imx8mm-var-var-som-rev10.dtb
</pre>
<section end=DART-MX8M-MINI_DTB/>
 
<section begin=DART-MX8M-MINI_DTB_ZEUS/>
<pre>
Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-dart.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-som.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/imx8mm-var-som-rev10.dtb
 
</pre>
<section end=DART-MX8M-MINI_DTB_ZEUS/>
 
<section begin=DART-MX8M-MINI_DTB_DUNFELL/>
<pre>
Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-dart-customboard.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/imx8mm-var-som-rev10-symphony.dtb
 
</pre>
<section end=DART-MX8M-MINI_DTB_DUNFELL/>
 
<section begin=DART-MX8M-MINI_DTB_DUNFELL_V11/>
<pre>
Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard:
$ make -j4 freescale/imx8mm-var-dart-customboard.dtb
 
Build only the device tree for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard:
$ make -j4 freescale/imx8mm-var-dart-customboard-m4.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy-m4.dtb
 
</pre>
<section end=DART-MX8M-MINI_DTB_DUNFELL_V11/>
 
<section begin=DART-MX8M-MINI_DTB_DUNFELL_V12/>
<pre>
Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard.dtb
 
Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-m4.dtb
 
Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy.dtb
 
Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy-m4.dtb
 
</pre>
<section end=DART-MX8M-MINI_DTB_DUNFELL_V12/>
 
<section begin=DART-MX8M-MINI_DTB_KIRKSTONE_V10/>
<pre>
Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard.dtb
 
Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-m4.dtb
 
Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy.dtb
 
Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb
 
</pre>
<section end=DART-MX8M-MINI_DTB_KIRKSTONE_V10/>
 
== SD card image file tree ==
<section begin=DART-MX8M-MINI_SD_TREE/>
<pre>
/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz
 
</pre>
<section end=DART-MX8M-MINI_SD_TREE/>
 
== Setting the Boot Mode ==
<section begin=DART-MX8M-MINI_BOOT_BOARD/>
Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
<pre>
SW7
0 : Boot from SD card
1 : Boot from eMMC
</pre>
<section end=DART-MX8M-MINI_BOOT_BOARD/>
 
= VAR-SOM-MX93 =
== Build Results ==
<section begin=VAR-SOM-MX93_BUILD_RESULTS_V1/>
{{MX93_BUILD_RESULTS_V1}} <!-- https://variwiki.com/index.php?title=Template:VAR-SOM-MX93_BUILD_RESULTS_V1 -->
<section end=VAR-SOM-MX93_BUILD_RESULTS_V1/>
 
<section begin=VAR-SOM-MX93_BUILD_RESULTS_V2/>
{{VAR-SOM-MX93_BUILD_RESULTS_V2}} <!-- https://variwiki.com/index.php?title=Template:VAR-SOM-MX93_BUILD_RESULTS_V2 -->
<section end=VAR-SOM-MX93_BUILD_RESULTS_V2/>
 
<section begin=VAR-SOM-MX93_BUILD_RESULTS_V3/>
{{VAR-SOM-MX93_BUILD_RESULTS_V3}} <!-- https://variwiki.com/index.php?title=Template:VAR-SOM-MX93_BUILD_RESULTS_V3 -->
<section end=VAR-SOM-MX93_BUILD_RESULTS_V3/>
 
= DART-MX95 =
== Build Results ==
<section begin=DART-MX95_BUILD_RESULTS_V1/>
{{DART-MX95_BUILD_RESULTS_V1}} <!-- https://variwiki.com/index.php?title=Template:DART-MX95_BUILD_RESULTS_V1 -->
<section end=DART-MX95_BUILD_RESULTS_V1/>
 
== MX95 Device tree v1 ==
<section begin=DART-MX95-DTB-V1/>
<pre>
Build only the device tree for DART-MX95 on Symphony-Board:
$ make -j4 freescale/imx95-var-dart-dt8mcustomboard.dtb
</pre>
<section end=DART-MX95-DTB-V1/>
 
= VAR-SOM-MX8M-NANO =
== Build Results ==
<section begin=VAR-SOM-MX8M-NANO_BUILD_RESULTS/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mn-var-som.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
|-
|}
<section end=VAR-SOM-MX8M-NANO_BUILD_RESULTS/>
 
== Build Results v2 ==
 
<section begin=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V2/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mn-var-som.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mn-var-som-rev10.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mn-var-som-m7.dtb
| style="padding: 5px;"| Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration.
|-
| style="padding: 5px;"| Image.gz-fsl-imx8mn-var-som-rev10-m7.dtb
| style="padding: 5px;"| Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration rev 1.0.
|-
|}
<section end=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V2/>
 
== Build Results v3 ==
 
<section begin=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V3/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX|imx8mn-var-som}}.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
|-
| style="padding: 5px;"| {{#var:DTB_PREFIX_REV10|imx8mn-var-som}}.dtb
| style="padding: 5px;"| Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0.
|-
|}
<section end=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V3/>
 
== Build Results v4 ==
 
<section begin=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V4/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8mn-var-som-symphony.dtb
| style="padding: 5px;"| Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
|-
| style="padding: 5px;"| imx8mn-var-som-symphony-m7.dtb
| style="padding: 5px;"| Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4A and above
|-
| style="padding: 5px;"| imx8mn-var-som-symphony-legacy.dtb
| style="padding: 5px;"| Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
|-
| style="padding: 5px;"| imx8mn-var-som-symphony-legacy-m7.dtb
| style="padding: 5px;"| Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4 and below
|-
|}
<section end=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V4/>
 
== Build Results v5 ==
 
<section begin=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V5/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8mn-var-som-symphony.dtb
| style="padding: 5px;"| Device tree for VAR-SOM-MX8M-NANO on Symphony-Board
|-
| style="padding: 5px;"| imx8mn-var-som-symphony-m7.dtb
| style="padding: 5px;"| Device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board
|-
|}
<section end=VAR-SOM-MX8M-NANO_BUILD_RESULTS_V5/>
 
== Device tree ==
<section begin=VAR-SOM-MX8M-NANO_DTB/>
<pre>
Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb
</pre>
<section end=VAR-SOM-MX8M-NANO_DTB/>
 
== Device tree v2 ==
<section begin=VAR-SOM-MX8M-NANO_DTB_V2/>
<pre>
Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/fsl-imx8mn-var-som-rev10.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7:
$ make -j4 freescale/fsl-imx8mn-var-som-m7.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0 with Cortex-M7:
$ make -j4 freescale/fsl-imx8mn-var-som-rev10-m7.dtb
</pre>
<section end=VAR-SOM-MX8M-NANO_DTB_V2/>
 
== Device tree v3 ==
<section begin=VAR-SOM-MX8M-NANO_DTB_V3/>
<pre>
Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/imx8mn-var-som.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/imx8mn-var-som-rev10.dtb
</pre>
<section end=VAR-SOM-MX8M-NANO_DTB_V3/>
 
== Device tree v4 ==
<section begin=VAR-SOM-MX8M-NANO_DTB_V4/>
<pre>
Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/imx8mn-var-som-rev10-symphony.dtb
</pre>
<section end=VAR-SOM-MX8M-NANO_DTB_V4/>
 
== Device tree v5 ==
<section begin=VAR-SOM-MX8M-NANO_DTB_V5/>
<pre>
Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mn-var-som-symphony-m7.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mn-var-som-symphony-legacy.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mn-var-som-symphony-legacy-m7.dtb
 
</pre>
<section end=VAR-SOM-MX8M-NANO_DTB_V5/>
 
== Device tree v6 ==
<section begin=VAR-SOM-MX8M-NANO_DTB_V6/>
<pre>
Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board:
$ make -j4 freescale/imx8mn-var-som-symphony-m7.dtb
 
</pre>
<section end=VAR-SOM-MX8M-NANO_DTB_V6/>
 
== SD card image file tree ==
<section begin=VAR-SOM-MX8M-NANO_SD_TREE/>
<pre>
/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz
 
</pre>
<section end=VAR-SOM-MX8M-NANO_SD_TREE/>
 
== SD card image file tree AM62==
<section begin=VAR-SOM-AM62_SD_TREE/>
<pre>
/opt/images/
└── Yocto
    └── rootfs.tar.zst
    └── boot
        └── tiboot3.bin
        └── uEnv.txt
        └── tispl.bin
        └── u-boot.img
</pre>
<section end=VAR-SOM-AM62_SD_TREE/>
 
== SD card image file tree AM33==
<section begin=VAR-SOM-AM33_SD_TREE/>
<pre>
/opt/images/
└── Yocto
    └── rootfs.ubi
    └── boot
        └── MLO-nand
        └── u-boot.img-nand
        └── var-som-am33.dtb
        └── zImage
</pre>
<section end=VAR-SOM-AM33_SD_TREE/>
 
== Setting the Boot Mode ==
<section begin=VAR-SOM-MX8M-NANO_BOOT_BOARD/>
Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
<pre>
SW3
0 : Boot from SD card
1 : Boot from eMMC
</pre>
<section end=VAR-SOM-MX8M-NANO_BOOT_BOARD/>
 
== MX93 Device tree v1 ==
<section begin=VAR-SOM-MX93-DTB-V1/>
<pre>
Build only the device tree for VAR-SOM-MX93 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony.dtb
</pre>
<section end=VAR-SOM-MX93-DTB-V1/>
 
<section begin=VAR-SOM-MX93-DTB-V2/>
<pre>
Build only the device tree for VAR-SOM-MX93 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX93 with Low Drive mode on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-ld.dtb
 
Build only the device tree for VAR-SOM-MX93 with WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony.dtb
 
Build only the device tree for VAR-SOM-MX93 with Low Drive mode, and WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony-ld.dtb
 
Build only the device tree for VAR-SOM-MX93 with Cortex-M33 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-m33.dtb
</pre>
<section end=VAR-SOM-MX93-DTB-V2/>
 
<section begin=VAR-SOM-MX93-DTB-V3/>
<pre>
Build only the device tree for VAR-SOM-MX93 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX93 with Low Drive mode on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-ld.dtb
 
Build only the device tree for VAR-SOM-MX93 with WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony.dtb
 
Build only the device tree for VAR-SOM-MX93 with Low Drive mode, and WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony-ld.dtb
 
Build only the device tree for VAR-SOM-MX93 with Cortex-M33 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-m33.dtb
 
Build only the device tree for DART-MX93 on DT8MCustomBoard:
$ make -j4 freescale/imx93-var-dart-dt8mcustomboard.dtb
 
Build only the device tree for DART-MX93 with Low Drive mode on DT8MCustomBoard:
$ make -j4 freescale/imx93-var-dart-dt8mcustomboard-ld.dtb
</pre>
<section end=VAR-SOM-MX93-DTB-V3/>
 
= DART-MX8M-PLUS =
 
== Basler Camera ==
 
=== local.conf for Zeus 2.3.0 ===
<section begin=DART-MX8M-PLUS_BASLER_LOCALCONF_ZEUS-230/>
IMAGE_INSTALL_append = " \
basler-camera-driver \
pylon \
python3-pypylon \
gentl-producer \
kernel-module-isp-vvcam \
imx8mp-modprobe-config \
basler-camera \
isp-imx \
xauth \
"
PREFERRED_VERSION_isp-imx                = "4.2.2.8+basler"
PREFERRED_VERSION_basler-camera          = "4.2.2.8+basler"
PREFERRED_VERSION_kernel-module-isp-vvcam = "4.2.2.8+basler"
<section end=DART-MX8M-PLUS_BASLER_LOCALCONF_ZEUS-230/>
 
=== local.conf for Zeus 2.3.2 ===
<section begin=DART-MX8M-PLUS_BASLER_LOCALCONF_ZEUS-232/>
IMAGE_INSTALL_append = " \
kernel-module-basler-camera \
pylon \
python3-pypylon \
gentl-producer \
kernel-module-isp-vvcam \
imx8mp-modprobe-config \
basler-camera \
isp-imx \
xauth \
"
PREFERRED_VERSION_isp-imx                = "4.2.2.13+basler"
PREFERRED_VERSION_basler-camera          = "4.2.2.13+basler"
PREFERRED_VERSION_kernel-module-isp-vvcam = "4.2.2.13+basler"
<section end=DART-MX8M-PLUS_BASLER_LOCALCONF_ZEUS-232/>
 
=== local.conf for Hardknott ===
<section begin=DART-MX8M-PLUS_BASLER_LOCALCONF_HARDKNOTT/>
IMAGE_INSTALL_append = " \
        pylon \
        python3-pypylon \
        gentl-producer \
        xauth \
        kernel-module-basler-camera \
"
IMAGE_INSTALL_append_mx8mp = " \
        imx8mp-modprobe-config \
        kernel-module-isp-vvcam \
        isp-imx \
        basler-camera \
"
PREFERRED_VERSION_isp-imx                = "4.2.2.14+basler"
PREFERRED_VERSION_basler-camera          = "4.2.2.14+basler"
PREFERRED_VERSION_kernel-module-isp-vvcam = "4.2.2.14+basler"
<section end=DART-MX8M-PLUS_BASLER_LOCALCONF_HARDKNOTT/>
 
=== local.conf for Hardknott with NXP support ===
<section begin=DART-MX8M-PLUS_BASLER_NXP_LOCALCONF_HARDKNOTT/>
IMAGE_INSTALL_append_mx8mp = " \
        kernel-module-isp-vvcam \
        isp-imx \
        basler-camera \
"
<section end=DART-MX8M-PLUS_BASLER_NXP_LOCALCONF_HARDKNOTT/>
 
=== Gestreamer for Zeus 2.3.0 ===
<section begin=DART-MX8M-PLUS_BASLER_GSTREAMER_ZEUS-230/>
The following commands apply to [https://www.variscite.com/product/accessories/vcam-ar0821b-camera-board/ VCAM-AR0821B] (daA3840-mc) only.<br>
Run the following command at the shell prompt:
$ gst-launch-1.0 -v v4l2src device=/dev/video0 ! waylandsink sync=false
<section end=DART-MX8M-PLUS_BASLER_GSTREAMER_ZEUS-230/>
 
=== Gestreamer for Zeus 2.3.2 ===
<section begin=DART-MX8M-PLUS_BASLER_GSTREAMER_ZEUS-232/>
The following commands apply to [https://www.variscite.com/product/accessories/vcam-ar0821b-camera-board/ VCAM-AR0821B] (daA3840-mc) only.<br>
Run the following commands at the shell prompt:
* 1920x1080@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video0 ! "video/x-raw,format=YUY2,width=1920,height=1080" ! waylandsink sync=false
* 3840x2160@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video0 ! "video/x-raw,format=YUY2,width=3840,height=2160" ! waylandsink sync=false
<section end=DART-MX8M-PLUS_BASLER_GSTREAMER_ZEUS-232/>
 
=== Gestreamer for Kirkstone ===
<section begin=DART-MX8M-PLUS_BASLER_GSTREAMER_KIRKSTONE/>
== Using the Basler gst-plugin-pylon plugin ==
Gstreamer is supported with Basler cameras by the Basler gst-plugin-pylon plugin.<br>
This plugin is already installed in any Basler-compatible Yocto image, either prebuilt or built as described above.<br>
To display the video stream run the following command at the shell prompt:
# gst-launch-1.0 pylonsrc ! videoconvert ! autovideosink
For further information, see: https://github.com/basler/gst-plugin-pylon
== Using the v4l2-compatible video source ==
For [https://www.variscite.com/product/accessories/vcam-ar0821b-camera-board/ VCAM-AR0821B] (daA3840-mc) and [https://www.variscite.com/product/accessories/vcam-ar0521b-camera-board/ VCAM-AR0521B] (daA2500-60mc), a v4l2-compatible video source is also available.<br>
To display the video stream in this mode, run the following commands at the shell prompt:
* 1920x1080@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video2 ! "video/x-raw,format=YUY2,width=1920,height=1080" ! waylandsink sync=false
* 3840x2160@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video2 ! "video/x-raw,format=YUY2,width=3840,height=2160" ! waylandsink sync=false
<section end=DART-MX8M-PLUS_BASLER_GSTREAMER_KIRKSTONE/>
 
<section begin=DART-MX8M-MINI_BASLER_GSTREAMER_KIRKSTONE/>
Gstreamer is supported with Basler cameras by the Basler gst-plugin-pylon plugin.<br>
This plugin is already installed in any Basler-compatible Yocto image, either prebuilt or built as described above.<br>
To display the video stream run the following command at the shell prompt:
# gst-launch-1.0 pylonsrc ! videoconvert ! autovideosink
For further information, see: https://github.com/basler/gst-plugin-pylon
<section end=DART-MX8M-MINI_BASLER_GSTREAMER_KIRKSTONE/>
 
=== Switch cameras for Hardknott ===
<section begin=DART-MX8M-PLUS_BASLER_SWITCH_CAM_HARDKNOTT/>
# cd /boot
# ln -fs imx8mp-var-dart-dt8mcustomboard-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-legacy-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard-legacy.dtb
# ln -fs imx8mp-var-som-symphony-basler-isp0.dtb imx8mp-var-som-symphony.dtb
To switch back run the following commands at the shell prompt:
# cd /boot
# ln -fs imx8mp-var-dart-dt8mcustomboard-basler-isi0.dtb imx8mp-var-dart-dt8mcustomboard.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-legacy-basler-isi0.dtb imx8mp-var-dart-dt8mcustomboard-legacy.dtb
# ln -fs imx8mp-var-som-symphony-basler-isi0.dtb imx8mp-var-som-symphony.dtb
<section end=DART-MX8M-PLUS_BASLER_SWITCH_CAM_HARDKNOTT/>
 
=== Switch cameras for Hardknott with NXP support ===
<section begin=DART-MX8M-PLUS_BASLER_NXP_SWITCH_CAM_HARDKNOTT/>
# cd /boot
# mv imx8mp-var-dart-dt8mcustomboard.dtb imx8mp-var-dart-dt8mcustomboard-ov5640.dtb
# mv imx8mp-var-dart-dt8mcustomboard-legacy.dtb imx8mp-var-dart-dt8mcustomboard-legacy-ov5640.dtb
# mv imx8mp-var-som-symphony.dtb imx8mp-var-som-symphony-ov5640.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-legacy-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard-legacy.dtb
# ln -fs imx8mp-var-som-symphony-basler-isp0.dtb imx8mp-var-som-symphony.dtb
<section end=DART-MX8M-PLUS_BASLER_NXP_SWITCH_CAM_HARDKNOTT/>
 
=== Gestreamer for Hardknott with NXP support ===
<section begin=DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_HARDKNOTT/>
$ gst-launch-1.0 -v v4l2src device=/dev/video0 ! waylandsink
<section end=DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_HARDKNOTT/>
 
=== Gestreamer for Kirkstone with NXP support ===
<section begin=DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_KIRKSTONE/>
$ gst-launch-1.0 -v v4l2src device=/dev/video2 ! waylandsink
<section end=DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_KIRKSTONE/>
 
=== Gestreamer for Kirkstone with NXP support and dual-camera enabled ===
<section begin=DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_KIRKSTONE_DUAL/>
# gst-launch-1.0 -v v4l2src device=/dev/video2 ! waylandsink
On boards with 2 cameras you can use the 2nd camera by replacing /dev/video2 with /dev/video3 in the above command. Dual camera currently can only work on VAR-DT8MCustomBoard due to hardware limitations of Symphony board. <br>
The following command will simultaneously record two video streams from both cameras:
# gst-launch-1.0 v4l2src device=/dev/video2 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! vpuenc_h264 ! avimux ! filesink location=./test0_h264.avi \
                  v4l2src device=/dev/video3 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! vpuenc_h264 ! avimux ! filesink location=./test1_h264.avi
<section end=DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_KIRKSTONE_DUAL/>
 
== Build Results ==
<section begin=DART-MX8M-PLUS_BUILD_RESULTS_V1/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.wic.gz
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8mp-var-dart.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-PLUS
|-
| style="padding: 5px;"| imx8mp-var-som.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-PLUS
|-
| style="padding: 5px;"| imx8mp-var-som-ov5640.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-PLUS with a 2nd OV5640 camera
|-
|}
<section end=DART-MX8M-PLUS_BUILD_RESULTS_V1/>
 
<section begin=DART-MX8M-PLUS_BUILD_RESULTS_V2/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.wic.gz
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8mp-var-dart-dt8mcustomboard.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V2.x and above
|-
| style="padding: 5px;"| imx8mp-var-dart-dt8mcustomboard-legacy.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V1.x
|-
| style="padding: 5px;"| imx8mp-var-som-symphony.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board
|-
| style="padding: 5px;"| imx8mp-var-som-symphony-2nd-ov5640.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera
|-
| style="padding: 5px;"| imx8mp-var-dart-dt8mcustomboard-m7.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-PLUS with Cortex-M7 on DT8MCustomBoard V2.x and above
|-
| style="padding: 5px;"| imx8mp-var-dart-dt8mcustomboard-legacy-m7.dtb
| style="padding: 5px;"| Device tree blob for DART-MX8M-PLUS with Cortex-M7 on DT8MCustomBoard V1.x
|-
| style="padding: 5px;"| imx8mp-var-som-symphony-m7.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-PLUS with Cortex-M7 on Symphony-Board
|-
| style="padding: 5px;"| imx8mp-var-som-symphony-2nd-ov5640-m7.dtb
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8M-PLUS with Cortex-M7 on Symphony-Board with a 2nd OV5640 camera
|-
|}
<section end=DART-MX8M-PLUS_BUILD_RESULTS_V2/>
 
== Device tree ==
<section begin=DART-MX8M-PLUS_DTB_V1/>
<pre>
Build only the device tree for DART-MX8M-PLUS:
$ make -j4 freescale/imx8mp-var-dart.dtb
 
Build only the device tree for VAR-SOM-MX8M-PLUS:
$ make -j4 freescale/imx8mp-var-som.dtb
 
Build only the device tree for VAR-SOM-MX8M-PLUS with second OV5640 camera:
$ make -j4 freescale/imx8mp-var-som-ov5640.dtb
 
</pre>
<section end=DART-MX8M-PLUS_DTB_V1/>
 
<section begin=DART-MX8M-PLUS_DTB_V2/>
<pre>
Build only the device tree for DART-MX8M-PLUS on DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mp-var-dart-dt8mcustomboard.dtb
 
Build only the device tree for DART-MX8M-PLUS on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mp-var-dart-dt8mcustomboard-legacy.dtb
 
Build only the device tree for VAR-SOM-MX8M-PLUS on Symphony-Board:
$ make -j4 freescale/imx8mp-var-som-symphony.dtb
 
Build only the device tree for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera:
$ make -j4 freescale/imx8mp-var-som-symphony-2nd-ov5640.dtb
 
</pre>
<section end=DART-MX8M-PLUS_DTB_V2/>
 
== SD card image file tree ==
<section begin=DART-MX8M-PLUS_SD_TREE/>
<pre>
/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz
 
</pre>
<section end=DART-MX8M-PLUS_SD_TREE/>
 
== Setting the Boot Mode ==
<section begin=DART-MX8M-PLUS_BOOT_BOARD/>
Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
<pre>
SW7
0 : Boot from SD card
1 : Boot from eMMC
</pre>
<section end=DART-MX8M-PLUS_BOOT_BOARD/>
 
= VAR-SOM-MX8X =
== Build Results ==
 
<section begin=VAR-SOM-MX8X_BUILD_RESULTS/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| fsl-imx8qxp-var-som-wifi.dtb
| style="padding: 5px;"| Device tree blob for WIFI configuration. SD card disabled.
|-
| style="padding: 5px;"| fsl-imx8qxp-var-som-sd.dtb
| style="padding: 5px;"| Device tree blob for SD configuration. WIFI disabled.
|-
|}
<section end=VAR-SOM-MX8X_BUILD_RESULTS/>
 
<section begin=VAR-SOM-MX8X_BUILD_RESULTS_V2/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-wifi.dtb
| style="padding: 5px;"| Device tree blob for WIFI configuration. SD card disabled.
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-wifi-m4.dtb
| style="padding: 5px;"| Device tree blob for WIFI configuration, with Cortex-M4 support. SD card disabled.
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-sd.dtb
| style="padding: 5px;"| Device tree blob for SD configuration. WIFI disabled.
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-sd-m4.dtb
| style="padding: 5px;"| Device tree blob for SD configuration, with Cortex-M4 support. WIFI disabled.
|-
|}
<section end=VAR-SOM-MX8X_BUILD_RESULTS_V2/>
 
<section begin=VAR-SOM-MX8X_BUILD_RESULTS_B0/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME_B0}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME_B0}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| fsl-imx8qxp-var-som-wifi.dtb
| style="padding: 5px;"| Device tree blob for WIFI configuration. SD card disabled.
|-
| style="padding: 5px;"| fsl-imx8qxp-var-som-sd.dtb
| style="padding: 5px;"| Device tree blob for SD configuration. WIFI disabled.
|-
|}
<section end=VAR-SOM-MX8X_BUILD_RESULTS_B0/>
 
<section begin=VAR-SOM-MX8X_BUILD_RESULTS_B0_V2/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME_B0}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME_B0}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | DTB File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-wifi.dtb
| style="padding: 5px;"| Device tree blob for WIFI configuration. SD card disabled.
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-wifi-m4.dtb
| style="padding: 5px;"| Device tree blob for WIFI configuration, with Cortex-M4 support. SD card disabled.
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-sd.dtb
| style="padding: 5px;"| Device tree blob for SD configuration. WIFI disabled.
|-
| style="padding: 5px;"| imx8qxp-var-som-symphony-sd-m4.dtb
| style="padding: 5px;"| Device tree blob for SD configuration, with Cortex-M4 support. WIFI disabled.
|-
|}
<section end=VAR-SOM-MX8X_BUILD_RESULTS_B0_V2/>
 
== Device tree ==
<section begin=VAR-SOM-MX8X_DTB/>
<pre>
Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-wifi.dtb
 
Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-sd.dtb
</pre>
<section end=VAR-SOM-MX8X_DTB/>
 
<section begin=VAR-SOM-MX8X_DTB_V2/>
<pre>
Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/imx8qxp-var-som-symphony-wifi.dtb
 
Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/imx8qxp-var-som-symphony-sd.dtb
</pre>
<section end=VAR-SOM-MX8X_DTB_V2/>
 
== SD card image file tree ==
<section begin=VAR-SOM-MX8X_SD_TREE/>
<pre>
/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz
 
</pre>
<section end=VAR-SOM-MX8X_SD_TREE/>
 
== Setting the Boot Mode ==
<section begin=VAR-SOM-MX8X_BOOT_BOARD/>
Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
<pre>
SW3
0 : Boot from SD card
1 : Boot from eMMC (Internal)
</pre>
<section end=VAR-SOM-MX8X_BOOT_BOARD/>
 
= VAR-SOM-MX8 =
== Build Results ==
<section begin=VAR-SOM-MX8_BUILD_RESULTS/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-som-dp.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with DP display
|-
| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-som-hdmi.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with HDMI display
|-
| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-som-lvds.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with LVDS display
|-
| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-spear-dp.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with DP display
|-
| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-spear-hdmi.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with HDMI display
|-
| style="padding: 5px;"| Image.gz-fsl-imx8qm-var-spear-lvds.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with LVDS display
|-
|}
Similar device trees with "imx8qp-" instead of "imx8qm-" are also generated, for SOMs with the i.MX8QP variant of the SoC.
<section end=VAR-SOM-MX8_BUILD_RESULTS/>
 
== Build Results v2 ==
<section begin=VAR-SOM-MX8_BUILD_RESULTS_V2/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8qm-var-som-dp.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with DP display
|-
| style="padding: 5px;"| imx8qm-var-som-hdmi.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with HDMI display
|-
| style="padding: 5px;"| imx8qm-var-som-lvds.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with LVDS display
|-
| style="padding: 5px;"| imx8qm-var-spear-dp.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with DP display
|-
| style="padding: 5px;"| imx8qm-var-spear-hdmi.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with HDMI display
|-
| style="padding: 5px;"| imx8qm-var-spear-lvds.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with LVDS display
|-
|}
Similar device trees starting with "imx8qp-" are also generated, for SOMs with the i.MX8QP variant of the SoC.
<section end=VAR-SOM-MX8_BUILD_RESULTS_V2/>
 
== Build Results v3 ==
<section begin=VAR-SOM-MX8_BUILD_RESULTS_V3/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8qm-var-som-dp.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with DP display
|-
| style="padding: 5px;"| imx8qm-var-som-hdmi.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with HDMI display
|-
| style="padding: 5px;"| imx8qm-var-som-lvds.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with LVDS display
|-
| style="padding: 5px;"| imx8qm-var-spear-dp.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with DP display
|-
| style="padding: 5px;"| imx8qm-var-spear-hdmi.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with HDMI display
|-
| style="padding: 5px;"| imx8qm-var-spear-lvds.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with LVDS display
|-
|}
Similar device trees starting with "imx8qp-" are also generated, for SOMs with the i.MX8QP variant of the SoC.
<section end=VAR-SOM-MX8_BUILD_RESULTS_V3/>
 
== Build Results v4 ==
<section begin=VAR-SOM-MX8_BUILD_RESULTS_V4/>
{| class="wikitable"
|-
! scope="col" | Image Name<br/>
! scope="col" | How to use<br/>
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.{{#var:SDCARD_IMG_EXT|sdcard.gz}}
| style="padding: 5px;"| This image is for SD card boot.<br> It can be flashed as-is on an SD card that can then be used to boot your system,<br> according to the relevant startup-guide of your product<br> (usually requires to press the boot select button, or toggle a DIP switch).<br> For detailed information refer to the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:DEFAULT_IMAGE_BB_NAME|fsl-image-gui}}-{{#var:MACHINE_NAME}}.tar.gz
| style="padding: 5px;"| Tarball with rootfs files.<br>Can be used to create an NFS root file system on the host.<br> See the  {{Varlink2|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}}} section for more info.<br>Also used to create our extended SD card.<br>See the [[Yocto_Build_Release#Create_a_bootable_SD_card | Create a bootable SD card]] section below.
|-
| style="padding: 5px;"| {{#var:KERNEL_IMAGE}}
| style="padding: 5px;"| Linux kernel image, same binary for SD card and eMMC.
|-
| style="padding: 5px;"| {{#var:U-BOOT_IMAGE_NAME}}
| style="padding: 5px;"| U-Boot built for SD card boot or eMMC boot.
|-
|}
 
{| class="wikitable"
|-
! scope="col" | File Name<br/>
! scope="col" | Description<br/>
|-
| style="padding: 5px;"| imx8qm-var-som-symphony-dp.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with DP display on Symphony Board
|-
| style="padding: 5px;"| imx8qm-var-som-symphony-hdmi.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with HDMI display on Symphony Board
|-
| style="padding: 5px;"| imx8qm-var-som-symphony-lvds.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with LVDS display on Symphony Board
|-
| style="padding: 5px;"| imx8qm-var-som-symphony-dp-m4.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with DP display and Cortex-M4 on Symphony Board
|-
| style="padding: 5px;"| imx8qm-var-som-symphony-hdmi-m4.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with HDMI display and Cortex-M4 on Symphony Board
|-
| style="padding: 5px;"| imx8qm-var-som-symphony-lvds-m4.dtb
| style="padding: 5px;"| DTB file for VAR-SOM-MX8 with LVDS display and Cortex-M4 on Symphony Board
|-
| style="padding: 5px;"| imx8qm-var-spear-sp8customboard-dp.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with DP display on SP8CustomBoard
|-
| style="padding: 5px;"| imx8qm-var-spear-sp8customboard-hdmi.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with HDMI display on SP8CustomBoard
|-
| style="padding: 5px;"| imx8qm-var-spear-sp8customboard-lvds.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with LVDS display on SP8CustomBoard
|-
| style="padding: 5px;"| imx8qm-var-spear-sp8customboard-dp-m4.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with DP display and Cortex-M4 on SP8CustomBoard
|-
| style="padding: 5px;"| imx8qm-var-spear-sp8customboard-hdmi-m4.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with HDMI display and Cortex-M4 on SP8CustomBoard
|-
| style="padding: 5px;"| imx8qm-var-spear-sp8customboard-lvds.m4.dtb
| style="padding: 5px;"| DTB file for SPEAR-MX8 with LVDS display and Cortex-M4 on SP8CustomBoard
|-
|}
Similar device trees starting with "imx8qp-" are also generated, for SOMs with the i.MX8QP variant of the SoC.
<section end=VAR-SOM-MX8_BUILD_RESULTS_V4/>
 
== Device tree ==
<section begin=VAR-SOM-MX8_DTB/>
<pre>
Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb
 
Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-som-hdmi.dtb
 
Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb
 
Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-spear-db.dtb
 
Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-spear-hdmi.dtb
 
Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-spear-lvds.dtb
</pre>
Replace imx8qm with imx8qp to build the device trees for the i.MX8QP variant of the SoC.
<section end=VAR-SOM-MX8_DTB/>
 
== Device tree v2 ==
<section begin=VAR-SOM-MX8_DTB_V2/>
<pre>
Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/imx8qm-var-som-db.dtb
 
Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/imx8qm-var-som-hdmi.dtb
 
Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/imx8qm-var-som-db.dtb
 
Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/imx8qm-var-spear-db.dtb
 
Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/imx8qm-var-spear-hdmi.dtb
 
Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/imx8qm-var-spear-lvds.dtb
</pre>
Replace imx8qm with imx8qp to build the device trees for the i.MX8QP variant of the SoC.
<section end=VAR-SOM-MX8_DTB_V2/>
 
== Device tree v3 ==
<section begin=VAR-SOM-MX8_DTB_V3/>
<pre>
Build device tree for VAR-SOM-MX8 with DP display on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-dp.dtb
 
Build device tree for VAR-SOM-MX8 with HDMI display on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-hdmi.dtb
 
Build device tree for VAR-SOM-MX8 with LVDS display on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-lvds.dtb
 
Build device tree for VAR-SOM-MX8 with DP display and Cortex-M4 on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-dp-m4.dtb
 
Build device tree for VAR-SOM-MX8 with HDMI display and Cortex-M4 on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-hdmi-m4.dtb
 
Build device tree for VAR-SOM-MX8 with LVDS display and Cortex-M4 on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-lvds-m4.dtb
 
Build device tree for SPEAR-MX8 with DP display on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-dp.dtb
 
Build device tree for SPEAR-MX8 with HDMI display on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-hdmi.dtb
 
Build device tree for SPEAR-MX8 with LVDS display on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-lvds.dtb
 
Build device tree for SPEAR-MX8 with DP display and Cortex-M4 on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-dp-m4.dtb
 
Build device tree for SPEAR-MX8 with HDMI display and Cortex-M4 on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-hdmi-m4.dtb


=== sumo-fslc-4.9.88-mx6-v1.1 ===
Build device tree for SPEAR-MX8 with LVDS display and Cortex-M4on SP8CustomBoard:
<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX6/>
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-lvds-m4.dtb
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
</pre>
-->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.1}}  <!--
Replace imx8qm with imx8qp to build the device trees for the i.MX8QP variant of the SoC.
-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.1_VAR-SOM-MX6}}  <!--
<section end=VAR-SOM-MX8_DTB_V3/>
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQPSx3AajKGeDmhNUx9Uw5qEe13_Dk2L35JjYC-bQiB5sD-P30ydA3lgq5e-UtmYN4_3ePo2GkM01Kn/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|sumo}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|wic.gz}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.88}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.88_2.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.1_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== sumo-fslc-4.9.88-mx6-v1.0 ===
== SD card image file tree ==
<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX6/>
<section begin=VAR-SOM-MX8_SD_TREE/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
<pre>
-->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6-v1.0}}  <!--
/opt/images/
-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_VAR-SOM-MX6}}  <!--
└── Yocto
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSCKgCpBv3y1DnU2FFqQR6CUex8nPMLTdrrYyix9lLbz-o0pL6qoUIqSvMPc3eo0zlbAoGIKeo1WZjr/pubhtml}}  <!--
    ├── imx-boot-sd.bin
-->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
    └── rootfs.tar.gz
-->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|sumo}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|wic.gz}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.88}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.88_2.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.0_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx6-v1.2 ===
</pre>
<section begin=RELEASE_ROCKO_V1.2_VAR-SOM-MX6/>
<section end=VAR-SOM-MX8_SD_TREE/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.2}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.2_VAR-SOM-MX6}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vR0eD_uZ7yKL1AlXX2JxuneUBoCN_ZZ5gc9-ty5IcRCF8nv2Lr9QLdZcQEXY3BJapcwtRvlp7ktdTb3/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|rocko}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.3}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.2_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx6-v1.1 ===
== DTB files table ==
<section begin=RELEASE_ROCKO_V1.1_VAR-SOM-MX6/>
<section begin=VAR-SOM-MX8_FDT_TABLE/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
{| class="wikitable"
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.1}}  <!--
|-
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX6}}  <!--
! scope="col" | DTB File Name<br/>
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQZT4UfUc2les0vV8lRebjNtOwKySN6AG-kw-JGc7Nw1EME0_sDjZJoiGzaUPd_gXvwkYc5B32ouILp/pubhtml}}  <!--
! scope="col" | Description<br/>
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
|-
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
| style="padding: 5px;"| fsl-imx8qm-var-som-dp.dtb
-->{{#vardefine:FSLC_BSP_VERSION|rocko}}  <!--
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with DP display
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
|-
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
| style="padding: 5px;"| fsl-imx8qm-var-som-hdmi.dtb
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with HDMI display
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
|-
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}}  <!--
| style="padding: 5px;"| fsl-imx8qm-var-som-lvds.dtb
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with LVDS display
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
|-
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
| style="padding: 5px;"| fsl-imx8qm-var-spear-dp.dtb
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with DP display
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
|-
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
| style="padding: 5px;"| fsl-imx8qm-var-spear-hdmi.dtb
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with HDMI display
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
|-
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
| style="padding: 5px;"| fsl-imx8qm-var-spear-lvds.dtb
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with LVDS display
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
|-
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
|}
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
<section end=VAR-SOM-MX8_FDT_TABLE/>
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--  
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.1_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx6-v1.0 ===
== DTB files table v2 ==
<section begin=RELEASE_ROCKO_V1.0_VAR-SOM-MX6/>
<section begin=VAR-SOM-MX8_FDT_TABLE_V2/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
{| class="wikitable"
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.0}}  <!--
|-
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX6}}  <!--
! scope="col" | DTB File Name<br/>
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTaKepnaAwm1umGw59L0ukHEa6VIIlEM9btCiWaXW0jx3nOQmwJ3h2QxyBbH2nMEwmDC_GvFbowtonR/pubhtml}}  <!--
! scope="col" | Description<br/>
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
|-
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
| style="padding: 5px;"| imx8qm-var-som-dp.dtb
-->{{#vardefine:FSLC_BSP_VERSION|rocko}}  <!--
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with DP display
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
|-
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
| style="padding: 5px;"| imx8qm-var-som-hdmi.dtb
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with HDMI display
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
|-
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}}  <!--
| style="padding: 5px;"| imx8qm-var-som-lvds.dtb
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
| style="padding: 5px;"| Device tree blob for VAR-SOM-MX8 with LVDS display
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
|-
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
| style="padding: 5px;"| imx8qm-var-spear-dp.dtb
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with DP display
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
|-
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
| style="padding: 5px;"| imx8qm-var-spear-hdmi.dtb
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with HDMI display
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
|-
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
| style="padding: 5px;"| imx8qm-var-spear-lvds.dtb
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
| style="padding: 5px;"| Device tree blob for SPEAR-MX8 with LVDS display
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
|-
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
|}
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
<section end=VAR-SOM-MX8_FDT_TABLE_V2/>
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
 
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
== Setting the Boot Mode ==
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
<section begin=VAR-SOM-MX8_BOOT_BOARD/>
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
<pre>
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
SW3 on VAR-SOM-MX8, SW6 on SPEAR-MX8
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
0 : Boot from SD card
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
1 : Boot from eMMC (Internal)
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
</pre>
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
<section end=VAR-SOM-MX8_BOOT_BOARD/>
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
 
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
= Release Notes =
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
<section begin=RELEASE_NOTES_SECTION/>
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
{{YOCTO_RELEASE_NOTES_V2}}
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
<section end=RELEASE_NOTES_SECTION/>
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
 
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
= Configuring RS485 Half-Duplex =
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
<section begin=RS485_HALF_DUPLEX/><!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:KERNEL_GIT_HTTP|{{#replace:{{#var:KERNEL_GIT}}|.git|}}}}<!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->Each UART can be configured for RS485 Half-Duplex mode by using a GPIO pin to drive the receive and transmit enable inputs. This can be configured in the device tree by making the following changes to the uart node and replacing ''X'', ''Y'' & ''Z'' with the proper values:
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx6-v1.0-beta ===
  &uart''X'' {                                                         /* Add RS485 properties to uart''X'' */
<section begin=RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6/>
pinctrl-names = "default";
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
pinctrl-0 = <&pinctrl_uart''X''>, <&pinctrl_uart''X''_rs485>;    /* Add RS485 GPIO pinctrl */
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6-v1.0-beta}}  <!--
rts-gpios = <&gpio''Y'' ''Z'' GPIO_ACTIVE_LOW>;                  /* Add rts-gpios property */
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6}}  <!--
linux,rs485-enabled-at-boot-time;                        /* Enable RS485 at boot time to skip using TIOCSRS485 ioctl */
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQh6c1wcWTFZqE5coUlIQHX8PTo8E_aAuibOOcpD84DbVxF8ldWTdLx6beMC5xMSrdpOym-MNEe-YWt/pubhtml}}  <!--
status = "okay";
-->{{#vardefine:YOCTO_NAME|Rocko}} <!--
};
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|rocko}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREAMER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== pyro-fslc-4.1.15-mx6-v1.0 ===
Next, configure the RS485 GPIO pin by adding <code>pinctrl_uart''X''_rs485</code> to <code>iomuxc</code>. Replace ''X'', ''GPIO_PIN_FUNCTION'', and ''GPIO_PIN_SETTINGS'' with the proper values:
<section begin=RELEASE_PYRO_V1.0_VAR-SOM-MX6/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6-v1.0}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_VAR-SOM-MX6}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSpLBEmJDrgI_lRl_HSyZ-CRBH4eu3wbL9WO83wBIGvmDntL8_FNPQAhck1wcJMUrhygxDPHVxqjNiB/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Pyro}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.3.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|pyro}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== pyro-fslc-4.1.15-mx6-v1.0-beta ===
  &iomuxc {
<section begin=RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6/>
pinctrl_uart''X''_rs485: uart''X''rs485 {
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
fsl,pins = <
-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6-v1.0-beta}}  <!--
''GPIO_PIN_FUNCTION'' ''GPIO_PIN_SETTINGS''
-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6}}  <!--
>;
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1czYgOE6lEw9AmJukRSTcVGrW0DBpqNmH6rsFrO1fsMg/pubhtml}}  <!--
};
-->{{#vardefine:YOCTO_NAME|Pyro}}  <!--
};
-->{{#vardefine:YOCTO_VERSION|2.3.1}}  <!--
'''Note:''' For more information about configuring pins, please see [https://www.variscite.com/blog/i-mx-device-tree-pinmux-settings/ i.MX Device Tree Pinmux Settings Guide]
-->{{#vardefine:FSLC_BSP_VERSION|pyro}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}} <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== morty-fslc-4.1.15-mx6-v1.0 ===
<section begin=RELEASE_MORTY_V1.0_VAR-SOM-MX6/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.0}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.0_VAR-SOM-MX6}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1nMcgrux22pqd_6ewJDs1zO_57DoTLP2cdm1DKKTGCBQ/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Morty}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.0_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== morty-fslc-4.1.15-mx6-v1.1 ===
After making these changes, RS485 mode will be enabled by default and can be verified from the console by running the commands below. Replace ''N'' with the proper value, which is typically ''X-1'' relative to the device tree node <code>uart''X''</code>:
<section begin=RELEASE_MORTY_V1.1_VAR-SOM-MX6/>
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.1}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.1_VAR-SOM-MX6}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1VYYGP6KQ991re4eJa8TT00vZbebBEuU-WEbnuB4hbXc/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Morty}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6var_som_sd_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6var_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:SOC|mx6}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x12000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.1_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== morty-fslc-4.1.15-mx6-v1.0-beta ===
  # stty -F /dev/tty{{#var:UART_PREFIX|mxc}}''N'' -echo -onlcr 115200
<section begin=RELEASE_MORTY_BETA_VAR-SOM-MX6/>
  # echo hello > /dev/tty{{#var:UART_PREFIX|mxc}}''N''
{{#vardefine:HARDWARE_NAME|VAR-SOM-MX6}} <!--
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6-v1.0-beta}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_BETA_VAR-SOM-MX6}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1WN-kGn3r9mcJh0EdSE3wZNBmhw5g5A95facy6gSIFn4/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Morty}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:GSTREAMER_SUPPORT|yes}}  <!-- This parameter enables support for GSTREMAER
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|var-som-mx6}} <!--
-->{{#vardefine:MACHINE_NAME_|var_som_mx6}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|uImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:KERNEL_BUILD_PARAMS|LOADADDR=0x10008000}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6var_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6var_som_sd_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6var_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX6_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX6_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX6_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX6_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX6_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX6}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd3}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|eglfs}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x18100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx6var_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x1e0000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x800000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0x3e0000}} <!--
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_BETA_VAR-SOM-MX6/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_KERNEL_BUILD_PARAMS = '''{{#var:KERNEL_KERNEL_BUILD_PARAMS}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


== DART-6UL ==
The below logic analyzer capture shows the RS485 RX/TX enable line toggling when writing to the UART:
=== morty-fslc-4.1.15-mx6ul-v1.0-beta ===
<section begin=RELEASE_MORTY_BETA_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6ul-v1.0-beta}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_BETA_DART-6UL}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1SznePOwPHdnxkbqpmP_1u6v6gXSceIHrRVPLFPB7qHE/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Morty}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx6ul-var-dart_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.10_dart_6ul_var1}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS_MORTY}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_BETA_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== morty-fslc-4.1.15-mx6ul-v1.0 ===
[[File:Rs485.png]]
<section begin=RELEASE_MORTY_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx6ul-v1.0}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.0_DART-6UL}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1nFdouD7N-phVy3GhUb5dU8C25qWVouCt_PLggpYm6s4/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Morty}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.2}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx6ul-var-dart_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS_MORTY}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.0_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== pyro-fslc-4.1.15-mx6ul-v1.0 ===
<section begin=RELEASE_PYRO_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6ul-v1.0}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_DART-6UL}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRpHJCyYRl7s-0v2OWhBi6dOlTka5drWPNJIrTXNEfRlSBvEVjixUKtfZmAR1FW86ZqyWVZxcu-S0kY/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Pyro}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.3.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.3.1}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx6ul-var-dart_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== pyro-fslc-4.1.15-mx6ul-v1.1 ===
Please refer to the Linux {{#if:{{#var:KERNEL_GIT}}|[{{#var:KERNEL_GIT_HTTP}}/tree/{{#var:KERNEL_BRANCH}}/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt device tree bindings]|device tree bindings}} for more RS485 configuration options.
<section begin=RELEASE_PYRO_V1.1_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
<section end=RS485_HALF_DUPLEX/>
-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6ul-v1.1}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.1_DART-6UL}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/1ClqVTLdiGDyFje2YQ_H6p8tylbdFOP-r0iMRdi_hkU4/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Pyro}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.3.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.3.1}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx6ul-var-dart_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB_PYRO_PLUS}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE_PYRO_PLUS}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.1_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
All other variables are the same as v1.2


=== pyro-fslc-4.1.15-mx6ul-v1.2 ===
<section begin=YOCTO_ENV_SETUP_X/>{{IMX_SETUP_ENV_RETURN}}<section end=YOCTO_ENV_SETUP_X/>
<section begin=RELEASE_PYRO_V1.2_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx6ul-v1.2}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.2_DART-6UL}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vSQcQq4U7Sig_O05Ei2hSDxo3q-iXNmIj5g49gjWIBQja56l6o2jNjgc1fhl3lLfSSEk6WegeH10M--/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Pyro}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.3.1}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.3.1}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var03}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx6ul-var-dart_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB_PYRO_PLUS}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE_PYRO_PLUS}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.2_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx6ul-v1.0-beta ===
<section begin=RELEASE_ROCKO_V1.0_BETA_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6ul-v1.0-beta}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_BETA_DART-6UL}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQE1S6-B5Wi0mtBsyUMoTf_Vs-mhyQBDCzpZAymGNhkEWJgZIcyIFyWRJNMzjOdXBNSY1xCLVx7kjlS/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB_PYRO_PLUS}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE_PYRO_PLUS}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_BETA_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx6ul-v1.0 ===
<section begin=YOCTO_ENV_SETUP_X_SHORT/><includeonly>
<section begin=RELEASE_ROCKO_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
The above command is only mandatory for the very first build setup: whenever restarting a newer build session (from a different terminal or in a different time), you can skip the full setup and just run
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6ul-v1.0}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_DART-6UL}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTUPjdt-nbNyWUFxjrkoIw4H-s1h5Uo3HYgYQvzHgL1SMIutt7fzGm1zq5vgwLQhNAb7fTqETSjBn2J/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB_PYRO_PLUS}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE_PYRO_PLUS}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx6ul-v1.1 ===
  {{#if:{{#var:BUILD_YOCTO_IN_DOCKER_CONTAINER}}|
<section begin=RELEASE_ROCKO_V1.1_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
  vari@yocto-{{#var:DOCKER_CONTAINER_INFO}}:/workdir$ source setup-environment {{#var:BUILD_FOLDER_ENV}}
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx6ul-v1.1}} <!--
  |
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_DART-6UL}}  <!--
  $ cd {{#var:BUILD_FOLDER}}
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vQ8x-FK8v6oSrDbs4NiZ4PkF7BWakCd813v59u3aV7tOM3CT8y3mTv1FQdN1VGWut5EkL_BHI5lSl0h/pubhtml}}  <!--
  $ source setup-environment {{#var:BUILD_FOLDER_ENV}}
-->{{#vardefine:YOCTO_NAME|Rocko}} <!--
}}
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
</includeonly><section end=YOCTO_ENV_SETUP_X_SHORT/>
-->{{#vardefine:FSLC_BSP_VERSION|2.4}} <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}} <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.3}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB_PYRO_PLUS}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE_PYRO_PLUS}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.1_DART-6UL/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== sumo-fslc-4.9.88-mx6ul-v1.0 ===
=Platform Customizations=
<section begin=RELEASE_SUMO_V1.0_DART-6UL/> {{#vardefine:HARDWARE_NAME|DART-6UL}} <!--
== VAR-SOM-MX6 ==
-->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx6ul-v1.0}}  <!--
<noinclude>{{:YPC_VAR-SOM-MX6}}</noinclude><includeonly><!--
-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_DART-6UL}} <!--
--><section begin=mx6-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRP5AOoijVweqdVWlEcd_91GP2SwZxsjasIo1aPo-tUB38uvvx9Uc0AXQAfbqgtuIg1oipgbcDFypIR/pubhtml}}  <!--
-->{{#lst:YPC_VAR-SOM-MX6|mx6-common-before}} <!-- Include variables common to all releases
-->{{#vardefine:YOCTO_NAME|Sumo}} <!--
-->{{#lst:YPC_VAR-SOM-MX6|mx6-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!--
-->{{#vardefine:YOCTO_VERSION|2.5}} <!--
-->{{#lst:YPC_VAR-SOM-MX6|mx6-common-after}} <!-- Include variables common to all releases
-->{{#vardefine:FSLC_BSP_VERSION|2.5}}  <!--
--><section end=mx6-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
-->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}}  <!--
<section begin=RELEASE_DUNFELL_V1.1_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_DUNFELL_V1.1_VAR-SOM-MX6}}<section end=RELEASE_DUNFELL_V1.1_VAR-SOM-MX6/>
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
<section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_DUNFELL_V1.0_VAR-SOM-MX6}}<section end=RELEASE_DUNFELL_V1.0_VAR-SOM-MX6/>
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
<section begin=RELEASE_THUD_V1.0_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_THUD_V1.0_VAR-SOM-MX6}}<section end=RELEASE_THUD_V1.0_VAR-SOM-MX6/>
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}} <!--
<section begin=RELEASE_SUMO_V1.2_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_SUMO_V1.2_VAR-SOM-MX6}}<section end=RELEASE_SUMO_V1.2_VAR-SOM-MX6/>
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_SUMO_V1.1_VAR-SOM-MX6}}<section end=RELEASE_SUMO_V1.1_VAR-SOM-MX6/>
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_SUMO_V1.0_VAR-SOM-MX6}}<section end=RELEASE_SUMO_V1.0_VAR-SOM-MX6/>
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_ROCKO_V1.2_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_ROCKO_V1.2_VAR-SOM-MX6}}<section end=RELEASE_ROCKO_V1.2_VAR-SOM-MX6/>
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_ROCKO_V1.1_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_ROCKO_V1.1_VAR-SOM-MX6}}<section end=RELEASE_ROCKO_V1.1_VAR-SOM-MX6/>
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
<section begin=RELEASE_ROCKO_V1.0_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_ROCKO_V1.0_VAR-SOM-MX6}}<section end=RELEASE_ROCKO_V1.0_VAR-SOM-MX6/>
-->{{#vardefine:BUILD_FOLDER_ABSOLUTE_PATH|/home/<uname>/var-fslc-yocto}} <!--
<section begin=RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6}}<section end=RELEASE_ROCKO_V1.0_BETA_VAR-SOM-MX6/>
-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
<section begin=RELEASE_PYRO_V1.0_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_PYRO_V1.0_VAR-SOM-MX6}}<section end=RELEASE_PYRO_V1.0_VAR-SOM-MX6/>
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
<section begin=RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6}}<section end=RELEASE_PYRO_V1.0_BETA_VAR-SOM-MX6/>
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
<section begin=RELEASE_MORTY_V1.1_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_MORTY_V1.1_VAR-SOM-MX6}}<section end=RELEASE_MORTY_V1.1_VAR-SOM-MX6/>
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
<section begin=RELEASE_MORTY_V1.0_VAR-SOM-MX6/>{{#lst:YPC_VAR-SOM-MX6|RELEASE_MORTY_V1.0_VAR-SOM-MX6}}<section end=RELEASE_MORTY_V1.0_VAR-SOM-MX6/>
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
</includeonly>
-->{{#vardefine:MACHINE_NAME|imx6ul-var-dart}} <!--
 
-->{{#vardefine:MACHINE_NAME_|imx6ul_var_dart}} <!--
== DART-6UL ==
-->{{#vardefine:SDCARD_IMG_EXT|wic.gz}} <!--
<noinclude>{{#lstx:YPC_DART-6UL|RELEASE_NOTES}}</noinclude><includeonly>
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
<section begin=RELEASE_MORTY_V1.0_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_MORTY_V1.0_DART-6UL}}<section end=RELEASE_MORTY_V1.0_DART-6UL/>
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
<section begin=RELEASE_PYRO_V1.0_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_PYRO_V1.0_DART-6UL}}<section end=RELEASE_PYRO_V1.0_DART-6UL/>
-->{{#vardefine:KERNEL_VER|4.9.88}} <!--
<section begin=RELEASE_PYRO_V1.1_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_PYRO_V1.1_DART-6UL}}<section end=RELEASE_PYRO_V1.1_DART-6UL/>
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.88_2.0.0_ga-var01}} <!--
<section begin=RELEASE_PYRO_V1.2_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_PYRO_V1.2_DART-6UL}}<section end=RELEASE_PYRO_V1.2_DART-6UL/>
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
<section begin=RELEASE_ROCKO_V1.0_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_ROCKO_V1.0_DART-6UL}}<section end=RELEASE_ROCKO_V1.0_DART-6UL/>
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
<section begin=RELEASE_ROCKO_V1.1_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_ROCKO_V1.1_DART-6UL}}<section end=RELEASE_ROCKO_V1.1_DART-6UL/>
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
<section begin=RELEASE_SUMO_V1.0_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_SUMO_V1.0_DART-6UL}}<section end=RELEASE_SUMO_V1.0_DART-6UL/>
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
<section begin=RELEASE_SUMO_V1.1_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_SUMO_V1.1_DART-6UL}}<section end=RELEASE_SUMO_V1.1_DART-6UL/>
-->{{#vardefine:U-BOOT_BOARD_NAME|mx6ul_var_dart}} <!--
<section begin=RELEASE_THUD_V1.0_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_THUD_V1.0_DART-6UL}}<section end=RELEASE_THUD_V1.0_DART-6UL/>
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx6ul_var_dart_mmc_defconfig}} <!--
<section begin=RELEASE_THUD_V1.1_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_THUD_V1.1_DART-6UL}}<section end=RELEASE_THUD_V1.1_DART-6UL/>
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx6ul_var_dart_nand_defconfig}} <!--
<section begin=RELEASE_ZEUS_V1.0_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_ZEUS_V1.0_DART-6UL}}<section end=RELEASE_ZEUS_V1.0_DART-6UL/>
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_mmc_SECURE_BOOT_defconfig}} <!--
<section begin=RELEASE_ZEUS_V1.1_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_ZEUS_V1.1_DART-6UL}}<section end=RELEASE_ZEUS_V1.1_DART-6UL/>
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx6ul_var_dart_nand_SECURE_BOOT_defconfig}} <!--
<section begin=RELEASE_ZEUS_V1.2_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_ZEUS_V1.2_DART-6UL}}<section end=RELEASE_ZEUS_V1.2_DART-6UL/>
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
<section begin=RELEASE_DUNFELL_V1.0_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_DUNFELL_V1.0_DART-6UL}}<section end=RELEASE_DUNFELL_V1.0_DART-6UL/>
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
<section begin=RELEASE_DUNFELL_V1.1_DART-6UL/>{{#lst:YPC_DART-6UL|RELEASE_DUNFELL_V1.1_DART-6UL}}<section end=RELEASE_DUNFELL_V1.1_DART-6UL/>
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
<section begin=mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0/>{{#lst:YPC_DART-6UL|mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0}}<section end=mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0/>
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
<section begin=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:KERNEL_DTB_SECTION|DART-6UL_DTB_PYRO_PLUS}} <!--
--><section end=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
-->{{#vardefine:SD_TREE_SECTION|DART-6UL_SD_TREE_SUMO_OR_SUMOPLUS}} <!--
<section begin=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-6UL_BUILD_RESULTS}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-6UL_BOOT_BOARD}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the Kirkstone minor release
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|DART-6UL_FLASH_SD_FROM_GUI}} <!--
--><section end=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.1/>
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VAR6UL}} <!--
<section begin=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk1}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the Kirkstone minor release
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.2}}<!-- Include the Kirkstone minor release
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--  
--><section end=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.2/>
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--  
<section begin=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.3/><!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--  
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the Kirkstone minor release
-->{{#vardefine:SOC|mx6ul}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.2}}<!-- Include the Kirkstone minor release
-->{{#vardefine:KERNEL_LOADADDR|0x82000000}} <!--
-->{{#lst:YPC_DART-6UL|mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.3}}<!-- Include the Kirkstone minor release
-->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.0_DART-6UL/>
--><section end=mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.3/>
*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
</includeonly>
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_PAD_SIZE = '''{{#var:UBOOT_PAD_SIZE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


== VAR-SOM-MX7 ==
== VAR-SOM-MX7 ==
=== morty-fslc-4.1.15-mx7-v1.0 ===
<noinclude>{{#lstx:YPC_VAR-SOM-MX7|RELEASE_NOTES}}</noinclude><includeonly>
<section begin=RELEASE_MORTY_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
<section begin=RELEASE_MORTY_V1.0_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_MORTY_V1.0_VAR-SOM-MX7}}<section end=RELEASE_MORTY_V1.0_VAR-SOM-MX7/>
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx7-v1.0}} <!--
<section begin=RELEASE_MORTY_V1.1_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_MORTY_V1.1_VAR-SOM-MX7}}<section end=RELEASE_MORTY_V1.1_VAR-SOM-MX7/>
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.0_VAR-SOM-MX7}}  <!--
<section begin=RELEASE_MORTY_V1.2_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_MORTY_V1.2_VAR-SOM-MX7}}<section end=RELEASE_MORTY_V1.2_VAR-SOM-MX7/>
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1UqpIu3ztSIbsXqV52QFLjz-jhTXLfUtsX9-HQUy6tsQ/pubhtml}}  <!--
<section begin=RELEASE_PYRO_V1.0_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_PYRO_V1.0_VAR-SOM-MX7}}<section end=RELEASE_PYRO_V1.0_VAR-SOM-MX7/>
-->{{#vardefine:YOCTO_NAME|Morty}}  <!--
<section begin=RELEASE_ROCKO_V1.0_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_ROCKO_V1.0_VAR-SOM-MX7}}<section end=RELEASE_ROCKO_V1.0_VAR-SOM-MX7/>
-->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
<section begin=RELEASE_ROCKO_V1.1_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_ROCKO_V1.1_VAR-SOM-MX7}}<section end=RELEASE_ROCKO_V1.1_VAR-SOM-MX7/>
-->{{#vardefine:FSLC_BSP_VERSION|2.2}} <!--
<section begin=RELEASE_ROCKO_V1.2_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_ROCKO_V1.2_VAR-SOM-MX7}}<section end=RELEASE_ROCKO_V1.2_VAR-SOM-MX7/>
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}}  <!--
<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_SUMO_V1.0_VAR-SOM-MX7}}<section end=RELEASE_SUMO_V1.0_VAR-SOM-MX7/>
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_SUMO_V1.1_VAR-SOM-MX7}}<section end=RELEASE_SUMO_V1.1_VAR-SOM-MX7/>
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
<section begin=RELEASE_THUD_V1.0_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_THUD_V1.0_VAR-SOM-MX7}}<section end=RELEASE_THUD_V1.0_VAR-SOM-MX7/>
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}}  <!--
<section begin=RELEASE_THUD_V1.1_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_THUD_V1.1_VAR-SOM-MX7}}<section end=RELEASE_THUD_V1.1_VAR-SOM-MX7/>
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_DUNFELL_V1.0_VAR-SOM-MX7}}<section end=RELEASE_DUNFELL_V1.0_VAR-SOM-MX7/>
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
<section begin=RELEASE_DUNFELL_V1.1_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_DUNFELL_V1.1_VAR-SOM-MX7}}<section end=RELEASE_DUNFELL_V1.1_VAR-SOM-MX7/>
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_DUNFELL_V1.2_VAR-SOM-MX7/>{{#lst:YPC_VAR-SOM-MX7|RELEASE_DUNFELL_V1.2_VAR-SOM-MX7}}<section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX7/>
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
<section begin=RELEASE_DUNFELL_V1.3_VAR-SOM-MX7/><!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
-->{{#lst:YPC_VAR-SOM-MX7|RELEASE_DUNFELL_V1.2_VAR-SOM-MX7}}<!-- Include the major release
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#lst:YPC_VAR-SOM-MX7|RELEASE_DUNFELL_V1.3_VAR-SOM-MX7}}<!-- Include the minor release
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
--><section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX7/>
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
<section begin=RELEASE_DUNFELL_V1.4_VAR-SOM-MX7/><!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#lst:YPC_VAR-SOM-MX7|RELEASE_DUNFELL_V1.2_VAR-SOM-MX7}}<!-- Include the major release
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#lst:YPC_VAR-SOM-MX7|RELEASE_DUNFELL_V1.4_VAR-SOM-MX7}}<!-- Include the minor release
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
--><section end=RELEASE_DUNFELL_V1.4_VAR-SOM-MX7/>
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
<section begin=mx7-yocto-hardknott-5.10.72_2.2.3-v1.0/>{{#lst:YPC_VAR-SOM-MX7|mx7-yocto-hardknott-5.10.72_2.2.3-v1.0}}<section end=mx7-yocto-hardknott-5.10.72_2.2.3-v1.0/>
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
<section begin=mx7-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#lst:YPC_VAR-SOM-MX7|mx7-yocto-hardknott-5.10.72_2.2.3-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#lst:YPC_VAR-SOM-MX7|mx7-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
--><section end=mx7-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
</includeonly>
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx7-var-som_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.imx-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.imx-nand}} <!--
-->{{#vardefine:U-BOOT_IMAGE_NAME|u-boot.imx}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|N/A}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|N/A}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--  
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--  
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--  
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.0_VAR-SOM-MX7/>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
== DART-MX8M ==
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
<noinclude>{{#lstx:YPC_DART-MX8M|RELEASE_NOTES}}</noinclude><includeonly>
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
<section begin=RELEASE_MORTY_V1.3_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_MORTY_V1.3_DART-MX8M}}<section end=RELEASE_MORTY_V1.3_DART-MX8M/>
All other variables are the same as v1.1
<section begin=RELEASE_MORTY_V1.4_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_MORTY_V1.4_DART-MX8M}}<section end=RELEASE_MORTY_V1.4_DART-MX8M/>
<section begin=RELEASE_SUMO_V1.0_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_SUMO_V1.0_DART-MX8M}}<section end=RELEASE_SUMO_V1.0_DART-MX8M/>
<section begin=RELEASE_SUMO_V1.1_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_SUMO_V1.1_DART-MX8M}}<section end=RELEASE_SUMO_V1.1_DART-MX8M/>
<section begin=RELEASE_SUMO_V1.2_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_SUMO_V1.2_DART-MX8M}}<section end=RELEASE_SUMO_V1.2_DART-MX8M/>
<section begin=RELEASE_SUMO_V1.3_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_SUMO_V1.3_DART-MX8M}}<section end=RELEASE_SUMO_V1.3_DART-MX8M/>
<section begin=RELEASE_SUMO_V2.0_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_SUMO_V2.0_DART-MX8M}}<section end=RELEASE_SUMO_V2.0_DART-MX8M/>
<section begin=RELEASE_SUMO_V2.1_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_SUMO_V2.1_DART-MX8M}}<section end=RELEASE_SUMO_V2.1_DART-MX8M/>
<section begin=RELEASE_SUMO_V2.2_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_SUMO_V2.2_DART-MX8M}}<section end=RELEASE_SUMO_V2.2_DART-MX8M/>
<section begin=RELEASE_WARRIOR_V1.0_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_WARRIOR_V1.0_DART-MX8M}}<section end=RELEASE_WARRIOR_V1.0_DART-MX8M/>
<section begin=RELEASE_WARRIOR_V1.1_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_WARRIOR_V1.1_DART-MX8M}}<section end=RELEASE_WARRIOR_V1.1_DART-MX8M/>
<section begin=RELEASE_ZEUS_V1.0_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_ZEUS_V1.0_DART-MX8M}}<section end=RELEASE_ZEUS_V1.0_DART-MX8M/>
<section begin=RELEASE_ZEUS_V1.1_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_ZEUS_V1.1_DART-MX8M}}<section end=RELEASE_ZEUS_V1.1_DART-MX8M/>
<section begin=RELEASE_DUNFELL_V1.0_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_DUNFELL_V1.0_DART-MX8M}}<section end=RELEASE_DUNFELL_V1.0_DART-MX8M/>
<section begin=RELEASE_DUNFELL_V1.1_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_DUNFELL_V1.1_DART-MX8M}}<section end=RELEASE_DUNFELL_V1.1_DART-MX8M/>
<section begin=RELEASE_DUNFELL_V1.2_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_DUNFELL_V1.2_DART-MX8M}}<section end=RELEASE_DUNFELL_V1.2_DART-MX8M/>
<section begin=RELEASE_DUNFELL_V1.3_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_DUNFELL_V1.3_DART-MX8M}}<section end=RELEASE_DUNFELL_V1.3_DART-MX8M/>
<section begin=RELEASE_DUNFELL_V1.4_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_DUNFELL_V1.4_DART-MX8M}}<section end=RELEASE_DUNFELL_V1.4_DART-MX8M/>
<section begin=RELEASE_DUNFELL_V1.5_DART-MX8M/>{{#lst:YPC_DART-MX8M|RELEASE_DUNFELL_V1.5_DART-MX8M}}<section end=RELEASE_DUNFELL_V1.5_DART-MX8M/>
<section begin=mx8m-yocto-dunfell-5.4-2.1.x-v1.6/><!--
-->{{#lst:YPC_DART-MX8M|RELEASE_DUNFELL_V1.5_DART-MX8M}}<!-- Include the major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-dunfell-5.4-2.1.x-v1.6}}<!-- Include the minor release
--><section end=mx8m-yocto-dunfell-5.4-2.1.x-v1.6/>
<section begin=mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0/>{{#lst:YPC_DART-MX8M|mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}<section end=mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0/>
<section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!--  Include the hardknott major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}} <!-- Include the kirkstone major release
--><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.0/>
<section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!--  Include the hardknott major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}} <!-- Include the kirkstone major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.1}} <!-- Include the kirkstone major release
--><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.1/>
<section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!--  Include the hardknott major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}} <!-- Include the kirkstone major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.2}} <!-- Include the kirkstone minor release
--><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.2/>
<section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.3/><!--
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!--  Include the hardknott major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}} <!-- Include the kirkstone major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.3}} <!-- Include the kirkstone minor release
--><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.3/>
<section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.4/><!--
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!--  Include the hardknott major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}} <!-- Include the kirkstone major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.4}} <!-- Include the kirkstone minor release
--><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.4/>
<section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.5/><!--
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!--  Include the hardknott major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}} <!-- Include the kirkstone major release
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-kirkstone-5.15-2.0.x-v1.5}} <!-- Include the kirkstone minor release
--><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.5/>
<section begin=mx8m-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
-->{{#lst:YPC_DART-MX8M|mx8m-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M|mx8m-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M|mx8m-common-after}}<!--  Include variables common to all releases
--><section end=mx8m-yocto-mickledore-6.1.36_2.1.0-v1.0/>
</includeonly>


== DART-MX8M-MINI ==
<noinclude>{{#lstx:YPC_DART-MX8M-MINI|RELEASE_NOTES}}</noinclude><includeonly>
<section begin=RELEASE_SUMO_V1.1_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V1.1_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V1.1_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V1.3_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V1.3_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V1.3_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V1.4_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V1.4_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V1.4_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V1.5_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V1.5_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V1.5_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V1.6_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V1.6_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V1.6_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V2.0_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V2.0_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V2.0_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V2.1_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V2.1_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V2.1_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V2.2_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V2.2_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V2.2_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V2.4_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V2.4_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V2.4_DART-MX8M-MINI/>
<section begin=RELEASE_SUMO_V2.5_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_SUMO_V2.5_DART-MX8M-MINI}}<section end=RELEASE_SUMO_V2.5_DART-MX8M-MINI/>
<section begin=RELEASE_WARRIOR_V1.0_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_WARRIOR_V1.0_DART-MX8M-MINI}}<section end=RELEASE_WARRIOR_V1.0_DART-MX8M-MINI/>
<section begin=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_WARRIOR_V1.1_DART-MX8M-MINI}}<section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/>
<section begin=RELEASE_ZEUS_V1.0_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_ZEUS_V1.0_DART-MX8M-MINI}}<section end=RELEASE_ZEUS_V1.0_DART-MX8M-MINI/>
<section begin=RELEASE_ZEUS_V1.1_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_ZEUS_V1.1_DART-MX8M-MINI}}<section end=RELEASE_ZEUS_V1.1_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.0_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.1_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.2_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.3_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.4_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.5_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.6_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/>
<section begin=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_DUNFELL_V1.7_DART-MX8M-MINI}}<section end=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/>
<section begin=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI}}<section end=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/>
<section begin=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI}}<section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/>
<section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/>{{#lst:YPC_DART-MX8M-MINI|RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI}}<section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/>
<section begin=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><!--
-->{{#lst:YPC_DART-MX8M-MINI|RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI}}<!-- Include the major release
-->{{#lst:YPC_DART-MX8M-MINI|RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI}}<!-- Include the minor release
--><section end=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/>
<section begin=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><!--
-->{{#lst:YPC_DART-MX8M-MINI|RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI}}<!-- Include the major release
-->{{#lst:YPC_DART-MX8M-MINI|RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI}}<!-- Include the minor release
--><section end=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/>
<section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/>{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}<section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/>
<section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}<!-- Include the minor release
--><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/>
<section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2}}<!-- Include the minor release
--><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/>
<section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
--><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/>
<section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}<!-- Include the Kirkstone minor release
--><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/>
<section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}<!-- Include the Kirkstone minor release
--><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/>
<section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3}}<!-- Include the Kirkstone minor release
--><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/>
</includeonly>
<section begin=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-after}}<!--  Include variables common to all releases
--><section end=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/>
<section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-after}}<!--  Include variables common to all releases
--><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/>
<section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}<!--  Include the mickledore minor release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-after}}<!--  Include variables common to all releases
--><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/>
<section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2}}<!--  Include the mickledore minor release
-->{{#lst:YPC_DART-MX8M-MINI|mx8mm-common-after}}<!--  Include variables common to all releases
--><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/>


=== morty-fslc-4.1.15-mx7-v1.1 ===
== VAR-SOM-MX8M-NANO ==
<section begin=RELEASE_MORTY_V1.1_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
<noinclude>{{#lstx:YPC_VAR-SOM-MX8M-NANO|RELEASE_NOTES}}</noinclude><includeonly>
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx7-v1.1}} <!--
<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO}}<section end=RELEASE_SUMO_V1.0_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.1_VAR-SOM-MX7}} <!--
<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_SUMO_V1.1_VAR-SOM-MX8M-NANO}}<section end=RELEASE_SUMO_V1.1_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1TjG1ZLv48GDhIHsrtThAqqezNvsd4i6kD6qn_Yac3qk/pubhtml}} <!--
<section begin=RELEASE_SUMO_V1.2_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_SUMO_V1.2_VAR-SOM-MX8M-NANO}}<section end=RELEASE_SUMO_V1.2_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:YOCTO_NAME|Morty}} <!--
<section begin=RELEASE_SUMO_V1.3_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_SUMO_V1.3_VAR-SOM-MX8M-NANO}}<section end=RELEASE_SUMO_V1.3_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:YOCTO_VERSION|2.2.1}} <!--
<section begin=RELEASE_ZEUS_V1.0_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_ZEUS_V1.0_VAR-SOM-MX8M-NANO}}<section end=RELEASE_ZEUS_V1.0_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:FSLC_BSP_VERSION|2.2}} <!--
<section begin=RELEASE_ZEUS_V1.1_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_ZEUS_V1.1_VAR-SOM-MX8M-NANO}}<section end=RELEASE_ZEUS_V1.1_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
<section begin=RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO}}<section end=RELEASE_ZEUS_V2.0_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
<section begin=RELEASE_ZEUS_V2.1_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_ZEUS_V2.1_VAR-SOM-MX8M-NANO}}<section end=RELEASE_ZEUS_V2.1_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}}  <!--
<section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.0_VAR-SOM-MX8M-NANO}}<section end=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}} <!--
<section begin=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.1_VAR-SOM-MX8M-NANO}}<section end=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.2_VAR-SOM-MX8M-NANO}}<section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
<section begin=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.3_VAR-SOM-MX8M-NANO}}<section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
<section begin=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.4_VAR-SOM-MX8M-NANO}}<section end=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO/>{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO}}<section end=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
<section begin=RELEASE_DUNFELL_V1.6_VAR-SOM-MX8M-NANO/><!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO}}<!-- Include the major release
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.6_VAR-SOM-MX8M-NANO}}<!-- Include the minor release
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
--><section end=RELEASE_DUNFELL_V1.6_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
<section begin=RELEASE_DUNFELL_V1.7_VAR-SOM-MX8M-NANO/><!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO}}<!-- Include the major release
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.7_VAR-SOM-MX8M-NANO}}<!-- Include the minor release
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
--><section end=RELEASE_DUNFELL_V1.7_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
<section begin=RELEASE_DUNFELL_V1.8_VAR-SOM-MX8M-NANO/><!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.5_VAR-SOM-MX8M-NANO}}<!-- Include the major release
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|RELEASE_DUNFELL_V1.8_VAR-SOM-MX8M-NANO}}<!-- Include the minor release
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
--><section end=RELEASE_DUNFELL_V1.8_VAR-SOM-MX8M-NANO/>
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
<section begin=mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx7-var-som_defconfig}} <!--
--><section end=mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0/>
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
<section begin=mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2015.04_4.1.15_1.1.0_ga_var03}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release (Reminder: for v1.1, include Hardknott, Kirkstone v1.0 with kirkstone updates, and a minimal Kirkstone v1.1)
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
--><section end=mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0/>
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
<section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.imx-sd}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.imx-nand}} <!--
--><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
-->{{#vardefine:U-BOOT_IMAGE_NAME|u-boot.imx}} <!--
<section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|N/A}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:SPL_NAND_IMAGE_NAME|N/A}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the Kirkstone minor release
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
--><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1/>
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE}} <!--
<section begin=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the Kirkstone minor release
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2}}<!-- Include the Kirkstone minor release
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
--><section end=mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2/>
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
<section begin=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-common-before}}<!--  Include variables common to all releases
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-common-after}}<!--  Include variables common to all releases
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--  
--><section end=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0/>
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--  
<section begin=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1/><!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--  
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-common-before}}<!--  Include variables common to all releases
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1}}<!--  Include the mickledore minor release
-->{{#vardefine:SOC|mx7}} <!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-common-after}}<!--  Include variables common to all releases
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
--><section end=mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1/>
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.1_VAR-SOM-MX7/>
<section begin=mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8M-NANO|mx8mn-common-after}}<!--  Include variables common to all releases
--><section end=mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0/>
</includeonly>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
== DART-MX8M-PLUS ==
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
<noinclude>{{#lstx:YPC_DART-MX8M-PLUS|RELEASE_NOTES}}</noinclude><includeonly>
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
<section begin=RELEASE_ZEUS_V1.0_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_ZEUS_V1.0_DART-MX8M-PLUS}}<section end=RELEASE_ZEUS_V1.0_DART-MX8M-PLUS/>
All other variables are the same as v1.2
<section begin=RELEASE_ZEUS_V2.0_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_ZEUS_V2.0_DART-MX8M-PLUS}}<section end=RELEASE_ZEUS_V2.0_DART-MX8M-PLUS/>
<section begin=RELEASE_ZEUS_V2.1_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_ZEUS_V2.1_DART-MX8M-PLUS}}<section end=RELEASE_ZEUS_V2.1_DART-MX8M-PLUS/>
<section begin=RELEASE_ZEUS_V2.2_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_ZEUS_V2.2_DART-MX8M-PLUS}}<section end=RELEASE_ZEUS_V2.2_DART-MX8M-PLUS/>


=== morty-fslc-4.1.15-mx7-v1.2 ===
<section begin=RELEASE_ZEUS_V3.0_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_ZEUS_V3.0_DART-MX8M-PLUS}}<section end=RELEASE_ZEUS_V3.0_DART-MX8M-PLUS/>
<section begin=RELEASE_MORTY_V1.2_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
<section begin=RELEASE_ZEUS_V3.1_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_ZEUS_V3.1_DART-MX8M-PLUS}}<section end=RELEASE_ZEUS_V3.1_DART-MX8M-PLUS/>
-->{{#vardefine:RELEASE_NAME|morty-fslc-4.1.15-mx7-v1.2}} <!--
<section begin=RELEASE_GATESGARTH_V1.0_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_GATESGARTH_V1.0_DART-MX8M-PLUS}}<section end=RELEASE_GATESGARTH_V1.0_DART-MX8M-PLUS/>
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.2_VAR-SOM-MX7}} <!--
<section begin=RELEASE_HARDKNOTT_V1.0_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V1.0_DART-MX8M-PLUS}}<section end=RELEASE_HARDKNOTT_V1.0_DART-MX8M-PLUS/>
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vRcG96qikRoOvjxjKNa67j-Vud2x4PN3r3cqRj5Tx0bYO9yMOYUY93OhYtMGXIOaWhrxeRj3kJfsJBz/pubhtml}} <!--
<section begin=RELEASE_HARDKNOTT_V1.1_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V1.1_DART-MX8M-PLUS}}<section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-PLUS/>
-->{{#vardefine:YOCTO_NAME|Morty}} <!--
<section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V1.2_DART-MX8M-PLUS}}<section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-PLUS/>
-->{{#vardefine:YOCTO_VERSION|2.2.1}} <!--
<section begin=RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS/>{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<section end=RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS/>
-->{{#vardefine:FSLC_BSP_VERSION|2.2}} <!--
<section begin=RELEASE_HARDKNOTT_V2.1_DART-MX8M-PLUS/><!--
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the major release
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.1_DART-MX8M-PLUS}}<!-- Include the minor release
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.2.1.sh}} <!--
--><section end=RELEASE_HARDKNOTT_V2.1_DART-MX8M-PLUS/>
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.2.1}} <!--
<section begin=RELEASE_HARDKNOTT_V2.2_DART-MX8M-PLUS/><!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the major release
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.2_DART-MX8M-PLUS}}<!-- Include the minor release
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
--><section end=RELEASE_HARDKNOTT_V2.2_DART-MX8M-PLUS/>
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
<section begin=RELEASE_HARDKNOTT_V2.3_DART-MX8M-PLUS/><!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the major release
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.3_DART-MX8M-PLUS}}<!-- Include the minor release
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
--><section end=RELEASE_HARDKNOTT_V2.3_DART-MX8M-PLUS/>
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
<section begin=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the major release
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the minor release
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
--><section end=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0/>
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
<section begin=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the Hardknott major release
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1}}<!-- Include the minor release
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
--><section end=mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/>
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
<section begin=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the Hardknott major release
-->{{#vardefine:KERNEL_DEFCONFIG|imx7-var-som_defconfig}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release (Reminder: for v1.1, include Hardknott, Kirkstone v1.0 with kirkstone updates, and a minimal Kirkstone v1.1)
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
--><section end=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/>
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
<section begin=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the Hardknott major release
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1}}<!-- Include the Kirkstone minor release
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
--><section end=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/>
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
<section begin=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the Hardknott major release
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2}}<!-- Include the Kirkstone minor release
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
--><section end=mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/>
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
<section begin=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the Hardknott major release
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE_SPL}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone minor release
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
--><section end=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
<section begin=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the Hardknott major release
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone 5.15-2.0.x major release
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone 5.15.72_2.2.0 major release
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the Kirkstone 5.15.72_2.2.0 minor release
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
--><section end=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/>
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
<section begin=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!--
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|RELEASE_HARDKNOTT_V2.0_DART-MX8M-PLUS}}<!-- Include the Hardknott major release
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone 5.15-2.0.x major release
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--  
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the Kirkstone 5.15.72_2.2.0 major release
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--  
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the Kirkstone 5.15.72_2.2.0 minor release
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--  
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2}}<!-- Include the Kirkstone 5.15.72_2.2.0 minor release
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
--><section end=mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/>
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
<section begin=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-before}}<!--  Include variables common to all releases
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#vardefine:YOCTO_BRANCH|morty}} <section end=RELEASE_MORTY_V1.2_VAR-SOM-MX7/>
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-after}}<!--  Include variables common to all releases
--><section end=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/>
<section begin=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/><!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1}}<!--  Include the mickledore minor release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-after}}<!--  Include variables common to all releases
--><section end=mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/>
<section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-after}}<!--  Include variables common to all releases
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/>
<section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1}}<!--  Include the mickledore minor release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-after}}<!--  Include variables common to all releases
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/>
<section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1}}<!--  Include the mickledore minor release with iw61x support
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}}<!--  Include the mickledore minor release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-after}}<!--  Include variables common to all releases
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/>
<section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/><!--
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1}}<!--  Include the mickledore minor release with iw61x support
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}}<!--  Include the mickledore minor release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3}}<!--  Include the mickledore minor release
-->{{#lst:YPC_DART-MX8M-PLUS|mx8mp-common-after}}<!--  Include variables common to all releases
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/>
</includeonly>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
== VAR-SOM-MX8X ==
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
<noinclude>{{#lstx:YPC_VAR-SOM-MX8X|RELEASE_NOTES}}</noinclude><includeonly>
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V1.0_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V1.0_VAR-SOM-MX8X/>
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V1.1_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V1.1_VAR-SOM-MX8X/>
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
<section begin=RELEASE_SUMO_V1.2_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V1.2_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V1.2_VAR-SOM-MX8X/>
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
<section begin=RELEASE_SUMO_V1.3_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V1.3_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V1.3_VAR-SOM-MX8X/>
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
<section begin=RELEASE_SUMO_V1.5_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V1.5_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V1.5_VAR-SOM-MX8X/>
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
<section begin=RELEASE_SUMO_V2.0_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V2.0_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V2.0_VAR-SOM-MX8X/>
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
<section begin=RELEASE_SUMO_V2.3_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V2.3_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V2.3_VAR-SOM-MX8X/>
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
<section begin=RELEASE_SUMO_V2.4_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_SUMO_V2.4_VAR-SOM-MX8X}}<section end=RELEASE_SUMO_V2.4_VAR-SOM-MX8X/>
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
<section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_DUNFELL_V1.0_VAR-SOM-MX8X}}<section end=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8X/>
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
<section begin=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_DUNFELL_V1.1_VAR-SOM-MX8X}}<section end=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8X/>
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
<section begin=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_DUNFELL_V1.2_VAR-SOM-MX8X}}<section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8X/>
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
<section begin=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8X/>{{#lst:YPC_VAR-SOM-MX8X|RELEASE_DUNFELL_V1.3_VAR-SOM-MX8X}}<section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8X/>
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
<section begin=mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0/>{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0}}<section end=mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0/>
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
<section begin=mx8x-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-hardknott-5.10.72_2.2.1-v1.1}}<!-- Include the minor release
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
--><section end=mx8x-yocto-hardknott-5.10.72_2.2.1-v1.1/>
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
<section begin=mx8x-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone minor release
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
--><section end=mx8x-yocto-kirkstone-5.15-2.0.x-v1.0/>
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
<section begin=mx8x-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-kirkstone-5.15-2.0.x-v1.1}}<!-- Include the Kirkstone minor release
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
--><section end=mx8x-yocto-kirkstone-5.15-2.0.x-v1.1/>
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
<section begin=mx8x-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the Hardknott major release
*READ_ONLY_ROOTFS = '''{{#var:yes}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the Kirkstone major release
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-kirkstone-5.15-2.0.x-v1.2}}<!-- Include the Kirkstone minor release
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
--><section end=mx8x-yocto-kirkstone-5.15-2.0.x-v1.2/>
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
<section begin=mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-before}}<!--  Include variables common to all releases
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-after}}<!--  Include variables common to all releases
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
--><section end=mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0/>
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
<section begin=mx8x-yocto-mickledore-6.1.22_2.0.0-v1.1/><!--
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-before}}<!--  Include variables common to all releases
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.22_2.0.0-v1.1}}<!--  Include the mickledore minor release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-after}}<!--  Include variables common to all releases
--><section end=mx8x-yocto-mickledore-6.1.22_2.0.0-v1.1/>
<section begin=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-after}}<!--  Include variables common to all releases
--><section end=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.0/>
<section begin=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.36_2.1.0-v1.1}}<!--  Include the mickledore minor release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-after}}<!--  Include variables common to all releases
--><section end=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.1/>
<section begin=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.36_2.1.0-v1.2}}<!--  Include the mickledore minor release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-after}}<!--  Include variables common to all releases
--><section end=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.2/>
<section begin=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.3/><!--
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-before}}<!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!--  Include the mickledore major release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-yocto-mickledore-6.1.36_2.1.0-v1.3}}<!--  Include the mickledore minor release
-->{{#lst:YPC_VAR-SOM-MX8X|mx8x-common-after}}<!--  Include variables common to all releases
--><section end=mx8x-yocto-mickledore-6.1.36_2.1.0-v1.3/>
</includeonly>


=== pyro-fslc-4.1.15-mx7-v1.0 ===
== VAR-SOM-MX8 ==
<section begin=RELEASE_PYRO_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
<noinclude>{{#lstx:YPC_VAR-SOM-MX8|RELEASE_NOTES}}</noinclude><includeonly>
-->{{#vardefine:RELEASE_NAME|pyro-fslc-4.1.15-mx7-v1.0}} <!--
<section begin=RELEASE_SUMO_V1.1_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.1_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.1_VAR-SOM-MX8/>
-->{{#vardefine:RELEASE_LINK|RELEASE_PYRO_V1.0_VAR-SOM-MX7}} <!--
<section begin=RELEASE_SUMO_V1.2_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.2_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.2_VAR-SOM-MX8/>
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/1EtR9uJKQp6W7-Ypw-scD5w_JoFRPqvlbpOWY1FtwhA0/pubhtml}} <!--
<section begin=RELEASE_SUMO_V1.3_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.3_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.3_VAR-SOM-MX8/>
-->{{#vardefine:YOCTO_NAME|Pyro}} <!--
<section begin=RELEASE_SUMO_V1.4_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.4_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.4_VAR-SOM-MX8/>
-->{{#vardefine:YOCTO_VERSION|2.3.1}} <!--
<section begin=RELEASE_SUMO_V1.5_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.5_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.5_VAR-SOM-MX8/>
-->{{#vardefine:FSLC_BSP_VERSION|2.3}} <!--
<section begin=RELEASE_SUMO_V1.6_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.6_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.6_VAR-SOM-MX8/>
-->{{#vardefine:FSL_BSP_VERSION|L4.1.15_2.0.0-ga}} <!--
<section begin=RELEASE_SUMO_V1.7_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.7_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.7_VAR-SOM-MX8/>
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.3.1.sh}} <!--
<section begin=RELEASE_SUMO_V1.8_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.8_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.8_VAR-SOM-MX8/>
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.3.1.sh}} <!--
<section begin=RELEASE_SUMO_V1.9_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_SUMO_V1.9_VAR-SOM-MX8}}<section end=RELEASE_SUMO_V1.9_VAR-SOM-MX8/>
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.3.1}} <!--
<section begin=RELEASE_ZEUS_V1.0_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_ZEUS_V1.0_VAR-SOM-MX8}}<section end=RELEASE_ZEUS_V1.0_VAR-SOM-MX8/>
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_ZEUS_V1.1_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_ZEUS_V1.1_VAR-SOM-MX8}}<section end=RELEASE_ZEUS_V1.1_VAR-SOM-MX8/>
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
<section begin=RELEASE_ZEUS_V1.2_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_ZEUS_V1.2_VAR-SOM-MX8}}<section end=RELEASE_ZEUS_V1.2_VAR-SOM-MX8/>
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_DUNFELL_V1.0_VAR-SOM-MX8}}<section end=RELEASE_DUNFELL_V1.0_VAR-SOM-MX8/>
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}} <!--
<section begin=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_DUNFELL_V1.1_VAR-SOM-MX8}}<section end=RELEASE_DUNFELL_V1.1_VAR-SOM-MX8/>
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}} <!--
<section begin=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_DUNFELL_V1.2_VAR-SOM-MX8}}<section end=RELEASE_DUNFELL_V1.2_VAR-SOM-MX8/>
-->{{#vardefine:BUILD_DISTRO|fslc-x11}} <!--
<section begin=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_DUNFELL_V1.3_VAR-SOM-MX8}}<section end=RELEASE_DUNFELL_V1.3_VAR-SOM-MX8/>
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}} <!--
<section begin=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8/>{{#lst:YPC_VAR-SOM-MX8|RELEASE_DUNFELL_V1.4_VAR-SOM-MX8}}<section end=RELEASE_DUNFELL_V1.4_VAR-SOM-MX8/>
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
<section begin=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8/><!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|RELEASE_DUNFELL_V1.4_VAR-SOM-MX8}}<!-- Include the major release
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|RELEASE_DUNFELL_V1.5_VAR-SOM-MX8}}<!-- Include the minor release
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
--><section end=RELEASE_DUNFELL_V1.5_VAR-SOM-MX8/>
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
<section begin=mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/>{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}<section end=mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/>
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
<section begin=mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-2.6-imx}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-hardknott-5.10.72_2.2.1-v1.1}}<!-- Include the minor release
-->{{#vardefine:KERNEL_VER|4.1.15}} <!--
--><section end=mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/>
-->{{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var02}} <!--
<section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
-->{{#vardefine:KERNEL_DEFCONFIG|imx7-var-som_defconfig}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the minor release
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
--><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.0/>
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
<section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the minor release
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-kirkstone-5.15-2.0.x-v1.1}}<!-- Include the minor release
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
--><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.1/>
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
<section begin=mx8-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-hardknott-5.10.72_2.2.1-v1.0}}<!-- Include the major release
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-kirkstone-5.15-2.0.x-v1.0}}<!-- Include the minor release
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-kirkstone-5.15-2.0.x-v1.2}}<!-- Include the minor release
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
--><section end=mx8-yocto-kirkstone-5.15-2.0.x-v1.2/>
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
<section begin=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-common-before}}<!-- Include variables common to all releases
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!-- Include the mickledore major release
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE_SPL}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
--><section end=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/>
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
<section begin=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-common-before}}<!-- Include variables common to all releases
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!-- Include the mickledore major release
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!-- Include the mickledore major release
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#lst:YPC_VAR-SOM-MX8|mx8-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
--><section end=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/>
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
</includeonly>
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--  
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--  
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--  
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
-->{{#vardefine:YOCTO_BRANCH|pyro}} <section end=RELEASE_PYRO_V1.0_VAR-SOM-MX7/>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
== VAR-SOM-MX93 ==
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
<noinclude>{{#lstx:YPC_VAR-SOM-MX93|RELEASE_NOTES}}</noinclude><includeonly><!--
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
--><section begin=mx93-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!--
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
--><section end=mx93-yocto-kirkstone-5.15.71_2.2.0-v1.0/><!--
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
--><section begin=mx93-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!--
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the major release
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the minor release
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
--><section end=mx93-yocto-kirkstone-5.15.71_2.2.0-v1.1/><!--
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
--><section begin=mx93-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!--
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-kirkstone-5.15.71_2.2.0-v1.0}}<!-- Include the major release
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-kirkstone-5.15.71_2.2.0-v1.1}}<!-- Include the minor release
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-kirkstone-5.15.71_2.2.0-v1.2}}<!-- Include the minor release
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
--><section end=mx93-yocto-kirkstone-5.15.71_2.2.0-v1.2/><!--
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
--><section begin=mx93-yocto-langdale-6.1.1_1.0.1-v1.0/><!--
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-langdale-6.1.1_1.0.1-v1.0}}<!-- Include the major release
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
--><section end=mx93-yocto-langdale-6.1.1_1.0.1-v1.0/><!--
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
--><section begin=mx93-yocto-langdale-6.1.1_1.0.1-v1.1/><!--
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-langdale-6.1.1_1.0.1-v1.0}}<!-- Include the major release
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-langdale-6.1.1_1.0.1-v1.1}}<!-- Include the minor release
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
*READ_ONLY_ROOTFS = '''{{#var:yes}}'''
--><section end=mx93-yocto-langdale-6.1.1_1.0.1-v1.1/><!--
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
--><section begin=mx93-yocto-langdale-6.1.1_1.0.1-v1.2/><!--
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-langdale-6.1.1_1.0.1-v1.0}}<!-- Include the major release
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-langdale-6.1.1_1.0.1-v1.2}}<!-- Include the minor release
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
--><section end=mx93-yocto-langdale-6.1.1_1.0.1-v1.2/><!--
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
--><section begin=mx93-yocto-langdale-6.1.1_1.0.1-v1.3/><!--
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-langdale-6.1.1_1.0.1-v1.0}}<!-- Include the major release
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-langdale-6.1.1_1.0.1-v1.3}}<!-- Include the minor release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
--><section end=mx93-yocto-langdale-6.1.1_1.0.1-v1.3/><!--
--><section begin=mx93-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.22_2.0.0-v1.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
--><section end=mx93-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
--><section begin=mx93-yocto-mickledore-6.1.36_2.1.0-v2.0/><!--
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
--><section end=mx93-yocto-mickledore-6.1.36_2.1.0-v2.0/>
--><section begin=mx93-yocto-mickledore-6.1.36_2.1.0-v2.1/><!--
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.1}}<!-- Include the minor release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
--><section end=mx93-yocto-mickledore-6.1.36_2.1.0-v2.1/>
--><section begin=mx93-yocto-mickledore-6.1.36_2.1.0-v2.2/><!--
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.2}}<!-- Include the minor release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
--><section end=mx93-yocto-mickledore-6.1.36_2.1.0-v2.2/>
--><section begin=mx93-yocto-mickledore-6.1.36_2.1.0-v2.3/><!--
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-before}} <!--  Include variables common to all releases
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v1.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.0}}<!-- Include the major release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.2}}<!-- Include the minor release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-yocto-mickledore-6.1.36_2.1.0-v2.3}}<!-- Include the minor release
-->{{#lst:YPC_VAR-SOM-MX93|mx93-common-after}} <!--  Include variables common to all releases
--><section end=mx93-yocto-mickledore-6.1.36_2.1.0-v2.3/>


=== rocko-fslc-4.9.11-mx7-v1.0 ===
</includeonly>
<section begin=RELEASE_ROCKO_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx7-v1.0}}  <!--
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.0_VAR-SOM-MX7}}  <!--
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTHNiQATuLGEsjNKtjysSOV0eyi9UznbvtR-32fJjIeMUbfN0HA-O5v3v6n66_gbWZhL-fVS5dZG4Eq/pubhtml}}  <!--
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.imx-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.imx-nand}} <!--
-->{{#vardefine:U-BOOT_IMAGE_NAME|u-boot-dtb.imx}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|N/A}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|N/A}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.0_VAR-SOM-MX7/>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
== VAR-SOM-AM62 ==
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
<section begin=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0/><!--
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!--  Include variables common to all releases
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0}}<!-- Include the dunfell major release
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
--><section end=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0/>
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*READ_ONLY_ROOTFS = '''{{#var:yes}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx7-v1.1 ===
<section begin=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.1/><!--
<section begin=RELEASE_ROCKO_V1.1_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!--  Include variables common to all releases
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx7-v1.1}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0}}<!-- Include the dunfell major release
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.1_VAR-SOM-MX7}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.1}}<!-- Include the dunfell minor release
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/d/e/2PACX-1vTTwrzlkYha4mlDlqzqvQVknuhDA-9XMztIZTjTbOL_Azq74QQ1QGmTeUzz_hnY1MqB6gF_pZkYqPO9/pubhtml}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
--><section end=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.1/>
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.1.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.1}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}} <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE_SPL}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.1_VAR-SOM-MX7/>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
<section begin=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.2/><!--
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!--  Include variables common to all releases
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0}}<!--  Include the dunfell major release
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.2}}<!-- Include the dunfell minor release
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
--><section end=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.2/>
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*READ_ONLY_ROOTFS = '''{{#var:yes}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== rocko-fslc-4.9.11-mx7-v1.2 ===
<section begin=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.3/><!--
<section begin=RELEASE_ROCKO_V1.2_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!--  Include variables common to all releases
-->{{#vardefine:RELEASE_NAME|rocko-fslc-4.9.11-mx7-v1.2}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0}}<!-- Include the dunfell major release
-->{{#vardefine:RELEASE_LINK|RELEASE_ROCKO_V1.2_VAR-SOM-MX7}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.3}}<!-- Include the dunfell minor release
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vR2bTPYqJDGU2YPWeIj4fMfoDVEhHundT94jJWMj9kJUkNnMJJy3wfpNofL0aX3pUb4jp2VnhyQ30_B/pubhtml}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:YOCTO_NAME|Rocko}}  <!--
--><section end=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.3/>
-->{{#vardefine:YOCTO_VERSION|2.4}}  <!--
-->{{#vardefine:FSLC_BSP_VERSION|2.4}}  <!--
-->{{#vardefine:FSL_BSP_VERSION|4.9.11_1.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.4.3.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.4.3}}  <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}} <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}} <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|sdcard}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE_SPL}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
-->{{#vardefine:YOCTO_BRANCH|rocko}} <section end=RELEASE_ROCKO_V1.2_VAR-SOM-MX7/>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
<section begin=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.4/><!--
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!--  Include variables common to all releases
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0}}<!--  Include the dunfell major release
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.3}}<!--  Include the dunfell minor release
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.4}}<!-- Include the dunfell minor release
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
--><section end=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.4/>
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*READ_ONLY_ROOTFS = '''{{#var:yes}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


=== sumo-fslc-4.9.88-mx7-v1.0 ===
<section begin=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.5/><!--
<section begin=RELEASE_SUMO_V1.0_VAR-SOM-MX7/> {{#vardefine:HARDWARE_NAME|VAR-SOM-MX7}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!-- Include variables common to all releases
-->{{#vardefine:RELEASE_NAME|sumo-fslc-4.9.88-mx7-v1.0}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.0}}<!--  Include the dunfell major release
-->{{#vardefine:RELEASE_LINK|RELEASE_SUMO_V1.0_VAR-SOM-MX7}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.3}}<!-- Include the dunfell minor release
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vSMG2mbXToagBx9ccpHN5ZCamxul5DG0bpFSYr1WQWCpYYG5XPdzoj8dQFNoWwFHNRq66aKVR23i5vY/pubhtml}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.4}}<!-- Include the dunfell minor release
-->{{#vardefine:YOCTO_NAME|Sumo}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-dunfell-5.10.168_08.06.00.42-v1.5}}<!-- Include the dunfell minor release
-->{{#vardefine:YOCTO_VERSION|2.5}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:FSLC_BSP_VERSION|2.5}}  <!--
--><section end=am62-yocto-dunfell-5.10.168_08.06.00.42-v1.5/>
-->{{#vardefine:FSL_BSP_VERSION|4.9.88_2.0.0-ga}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.5.sh}}  <!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fslc-x11-glibc-x86_64-meta-toolchain-qt5-armv7at2hf-neon-toolchain-2.5.sh}} <!--
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fslc-x11/2.5}} <!--
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/x86_64-fslcsdk-linux}}  <!--
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroot/armv7at2hf-neon-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:TOOLCHAIN_TYPE|arm-fslc-linux-gnueabi}}  <!--
-->{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}  <!--
-->{{#vardefine:BUILD_DISTRO|fslc-x11}}  <!--
-->{{#vardefine:BUILD_DISTRO_FB|fslc-framebuffer}}  <!--
-->{{#vardefine:BUILD_FOLDER_FB|build_fb}} <!--
-->{{#vardefine:BUILD_SCRIPT|. setup-environment}} <!--
-->{{#vardefine:BUILD_FOLDER_X11|build_x11}} <!--
-->{{#vardefine:MACHINE_NAME|imx7-var-som}} <!--
-->{{#vardefine:MACHINE_NAME_|imx7_var_som}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|wic.gz}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_VER|4.9.11}} <!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.11_1.0.0_ga-var01}} <!--
-->{{#vardefine:KERNEL_IMAGE|zImage}} <!--
-->{{#vardefine:KERNEL_DEFCONFIG|imx_v7_var_defconfig}} <!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.11_1.0.0_ga_var01}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|mx7dvar_som}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|mx7dvar_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_DEFCONFIG|mx7dvar_som_nand_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|mx7dvar_som_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_NAND_SECURE_BOOT_DEFCONFIG|mx7dvar_som_nand_SECURE_BOOT_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|u-boot.img-sd}} <!--
-->{{#vardefine:U-BOOT_NAND_IMAGE_NAME|u-boot.img-nand}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|SPL-sd}} <!--
-->{{#vardefine:SPL_NAND_IMAGE_NAME|SPL-nand}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RELEASE_NAME}}.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/fslc}} <!--
-->{{#vardefine:KERNEL_DTB_SECTION|VAR-SOM-MX7_DTB}} <!--
-->{{#vardefine:SD_TREE_SECTION|VAR-SOM-MX7_SD_TREE_SUMO_OR_SUMOPLUS}} <!--
-->{{#vardefine:YOCTO_GIT|https://github.com/varigit/variscite-bsp-platform.git}} <!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|VAR-SOM-MX7_BUILD_RESULTS}} <!--
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|VAR-SOM-MX7_BOOT_BOARD}} <!--
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|VAR-SOM-MX7_FLASH_SD_FROM_GUI}} <!--
-->{{#vardefine:EMMC_FAT_PARTITION_NAME|BOOT-VARMX7}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p2}} <!--
-->{{#vardefine:NAND_ROOTFS_DEV|mtd4}} <!--
-->{{#vardefine:READ_ONLY_ROOTFS|yes}} <!--
-->{{#vardefine:QT_PLATFORM_PLUGIN|linuxfb}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x83100000}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/mx7dvar_som.h}} <!--
-->{{#vardefine:UBOOT_PAD_SIZE|0x200000}} <!--
-->{{#vardefine:KERNEL_PAD_SIZE|0x7e0000}} <!--
-->{{#vardefine:KERNEL_START_ADDRESS|0x600000}} <!--
-->{{#vardefine:DTB_START_ADDRESS|0xde0000}} <!--
-->{{#vardefine:SOC|mx7}} <!--
-->{{#vardefine:KERNEL_LOADADDR|0x80800000}} <!--
-->{{#vardefine:YOCTO_BRANCH|sumo}} <section end=RELEASE_SUMO_V1.0_VAR-SOM-MX7/>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
<section begin=am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.0/><!--
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!--  Include variables common to all releases
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.0}}<!-- Include the dunfell major release
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
*FSLC_BSP_VERSION = '''{{#var:FSLC_BSP_VERSION}}'''
--><section end=am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.0/>
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_NAND_DEFCONFIG = '''{{#var:U-BOOT_NAND_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*U-BOOT_NAND_IMAGE_NAME = '''{{#var:U-BOOT_NAND_IMAGE_NAME}}'''
*SPL_SD_IMAGE_NAME = '''{{#var:SPL_SD_IMAGE_NAME}}'''
*SPL_NAND_IMAGE_NAME = '''{{#var:SPL_NAND_IMAGE_NAME}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*READ_ONLY_ROOTFS = '''{{#var:yes}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*NAND_ROOTFS_DEV = '''{{#var:NAND_ROOTFS_DEV}}'''
*QT_PLATFORM_PLUGIN = '''{{#var:QT_PLATFORM_PLUGIN}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}


== DART-MX8M ==
<section begin=am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.1/><!--
=== morty-fsl-4.9.51-mx8m-v1.3 ===
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!-- Include variables common to all releases
<section begin=RELEASE_MORTY_V1.3_DART-MX8M/>
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.0}}<!-- Include the dunfell major release
{{#vardefine:HARDWARE_NAME|DART-MX8M}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.1}}<!-- Include the dunfell major release
-->{{#vardefine:MACHINE_NAME|imx8m-var-dart}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:MACHINE_NAME_|imx8m_var_dart}} <!--
--><section end=am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.1/>
-->{{#vardefine:SOC|mx8m}} <!--
 
-->{{#vardefine:RELEASE_NAME|dart-mx8m_SD_card_v13}}  <!--
<section begin=am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.2/><!--
-->{{#vardefine:RELEASE_LINK|RELEASE_MORTY_V1.3_DART-MX8M}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!-- Include variables common to all releases
-->{{#vardefine:RELEASE_NOTES_LINK|https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vQyW2W3XQE4WG7NAHdw8lPXKfFAsVjqb-oNslF0QXFlc2C_4QGzVVMitvy9jlNgRXPnmZeogpM5swZQ/pubhtml}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.0}}<!-- Include the kirkstone major release
-->{{#vardefine:YOCTO_NAME|Morty}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.1}}<!-- Include the kirkstone minor release
-->{{#vardefine:YOCTO_VERSION|2.2.1}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.2}}<!-- Include the kirkstone minor release
-->{{#vardefine:YOCTO_GIT|https://source.codeaurora.org/external/imx/imx-manifest}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:YOCTO_META_GIT|N/A}} <!--
--><section end=am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.2/>
-->{{#vardefine:YOCTO_BRANCH|imx-linux-morty }} <!--
 
-->{{#vardefine:YOCTO_MANIFEST|imx-4.9.51-8mq_ga.xml }} <!--
<section begin=am62-yocto-kirkstone-6.1.83_09.02.01.10-v1.0/><!--
-->{{#vardefine:YOCTO_BUILD_RESULTS_SECTION|DART-MX8M_BUILD_RESULTS}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!-- Include variables common to all releases
-->{{#vardefine:YOCTO_BOOT_BOARD_SECTION|DART-MX8M_BOOT_BOARD}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.83_09.02.01.10-v1.0}}<!-- Include the kirkstone major release
-->{{#vardefine:YOCTO_FLASH_SD_FROM_GUI_SECTION|N/A}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:YOCTO_DOC_FSL_BSP|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/Linux/Yocto/{{#var:FSL_BSP_VERSION}}}} <!--
--><section end=am62-yocto-kirkstone-6.1.83_09.02.01.10-v1.0/>
-->{{#vardefine:FSL_BSP_VERSION|L4.9.51_mx8mq-ga}} <!--
 
-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-aarch64-toolchain-4.9.51-mx8-ga.sh}}  <!--
<section begin=am62-yocto-kirkstone-6.1.83_09.02.01.10-v1.1/><!--
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-4.9.51-mx8-ga.sh}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-before}}<!-- Include variables common to all releases
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/4.9.51-mx8-ga}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.83_09.02.01.10-v1.0}}<!-- Include the kirkstone major release
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-aarch64-poky-linux}} <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-yocto-kirkstone-6.1.83_09.02.01.10-v1.1}}<!-- Include the kirkstone minor release
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}}  <!--
-->{{#lst:YPC_VAR-SOM-AM62|am62-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/aarch64-poky-linux}}  <!--
--><section end=am62-yocto-kirkstone-6.1.83_09.02.01.10-v1.1/>
-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}}  <!--
 
-->{{#vardefine:BUILD_FOLDER|~/var-fsl-yocto}} <!--
== VAR-SOM-AM33 ==
-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}}  <!--
<section begin=am33-yocto-dunfell-5.10.100_08.02.00.24-v1.0/><!--
-->{{#vardefine:BUILD_SCRIPT|. var-setup-release.sh}} <!--
-->{{#lst:YPC_VAR-SOM-AM33|am33-common-before}}<!-- Include variables common to all releases
-->{{#vardefine:BUILD_FOLDER_XWAYLAND|build_xwayland}} <!--
-->{{#lst:YPC_VAR-SOM-AM33|am33-yocto-dunfell-5.10.100_08.02.00.24-v1.0}}<!-- Include the dunfell major release
-->{{#vardefine:BUILD_FOLDER_WAYLAND|build_wayland}} <!--
-->{{#lst:YPC_VAR-SOM-AM33|am33-common-after}}<!-- Include variables common to all releases
-->{{#vardefine:BUILD_FOLDER_X11|build_xwayland}} <!--
--><section end=am33-yocto-dunfell-5.10.100_08.02.00.24-v1.0/>
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
 
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
== DART-MX95 ==
-->{{#vardefine:KERNEL_VER|4.9.51}} <!--
<noinclude>{{#lstx:YPC_DART-MX95|RELEASE_NOTES}}</noinclude><includeonly><!--
-->{{#vardefine:KERNEL_BRANCH|imx_4.9.51_imx8m_ga_var01}} <!--
--><section begin=mx95-yocto-nanbield-6.6.3_1.0.0-v1.0/><!--
-->{{#vardefine:KERNEL_IMAGE|Image.gz}} <!--
-->{{#lst:YPC_DART-MX95|mx95-common-before}} <!-- Include variables common to all releases
-->{{#vardefine:KERNEL_DEFCONFIG|imx8m_var_dart_defconfig}} <!--
-->{{#lst:YPC_DART-MX95|mx95-yocto-nanbield-6.6.3_1.0.0-v1.0}}<!--
-->{{#vardefine:KERNEL_PAD_SIZE|N/A}} <!--  
-->{{#lst:YPC_DART-MX95|mx95-common-after}} <!-- Include variables common to all releases
-->{{#vardefine:KERNEL_START_ADDRESS|N/A}} <!--
--><section end=mx95-yocto-nanbield-6.6.3_1.0.0-v1.0/>
-->{{#vardefine:KERNEL_DTB_SECTION|DART-MX8M_DTB}} <!--
 
-->{{#vardefine:DTB_START_ADDRESS|N/A}} <!--
--><section begin=mx95-yocto-scarthgap-6.6.23_2.0.0-v1.0/><!--
-->{{#vardefine:U-BOOT_GIT|https://github.com/varigit/uboot-imx.git}} <!--
-->{{#lst:YPC_DART-MX95|mx95-common-before}} <!-- Include variables common to all releases
-->{{#vardefine:U-BOOT_BRANCH|imx_v2017.03_4.9.51_imx8m_ga_var01}} <!--
-->{{#lst:YPC_DART-MX95|mx95-yocto-scarthgap-6.6.23_2.0.0-v1.0}}<!--
-->{{#vardefine:U-BOOT_BOARD_NAME|imx8m_var_dart}} <!--
-->{{#lst:YPC_DART-MX95|mx95-common-after}} <!-- Include variables common to all releases
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8m_var_dart_defconfig}} <!--
--><section end=mx95-yocto-scarthgap-6.6.23_2.0.0-v1.0/>
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|N/A}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!--
-->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot.bin}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/imx8m_var_dart.h}} <!--
-->{{#vardefine:SPL_SD_IMAGE_NAME|N/A}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|dart-mx8m-recovery-sd.v13.img.gz}} <!--
-->{{#vardefine:RECOVERY_SD_URL|ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software}} <!--
-->{{#vardefine:SD_TREE_SECTION|DART-MX8M_SD_TREE}} <!--
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk0}} <!--
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
-->{{#vardefine:READ_ONLY_ROOTFS|no}} <!--
-->{{#vardefine:RAM_LOAD_ADDRESS|0x40480000}} <!--  
-->{{#vardefine:META_VARISCITE_BRANCH|morty-imx-4.9.51-var01}}
<section end=RELEASE_MORTY_V1.3_DART-MX8M/>


*RELEASE_NAME = '''{{#var:RELEASE_NAME}}'''
</includeonly>
*RELEASE_LINK = '''{{#var:RELEASE_LINK}}'''
*RELEASE_NOTES_LINK = '''{{#var:RELEASE_NOTES_LINK}}'''
*YOCTO_NAME = '''{{#var:YOCTO_NAME}}'''
*YOCTO_VERSION = '''{{#var:YOCTO_VERSION}}'''
*YOCTO_GIT = '''{{#var:YOCTO_GIT}}'''
*YOCTO_META_GIT = '''{{#var:YOCTO_META_GIT}}'''
*YOCTO_BRANCH = '''{{#var:YOCTO_BRANCH}}'''
*YOCTO_BUILD_RESULTS_SECTION = '''{{#var:YOCTO_BUILD_RESULTS_SECTION}}'''
*YOCTO_BOOT_BOARD_SECTION = '''{{#var:YOCTO_BOOT_BOARD_SECTION}}'''
*YOCTO_FLASH_SD_FROM_GUI_SECTION = '''{{#var:YOCTO_FLASH_SD_FROM_GUI_SECTION}}'''
*YOCTO_DOC_FSL_BSP = '''{{#var:YOCTO_DOC_FSL_BSP}}
*FSL_BSP_VERSION = '''{{#var:FSL_BSP_VERSION}}'''
*RECOVERY_SD_NAME = '''{{#var:RECOVERY_SD_NAME}}'''
*RECOVERY_SD_URL = '''{{#var:RECOVERY_SD_URL}}'''
*MACHINE_NAME = '''{{#var:MACHINE_NAME}}'''
*KERNEL_REPO_NAME = '''{{#var:KERNEL_REPO_NAME}}'''
*KERNEL_GIT = '''{{#var:KERNEL_GIT}}'''
*KERNEL_BRANCH = '''{{#var:KERNEL_BRANCH}}'''
*KERNEL_IMAGE = '''{{#var:KERNEL_IMAGE}}'''
*KERNEL_DEFCONFIG = '''{{#var:KERNEL_DEFCONFIG}}'''
*KERNEL_PAD_SIZE = '''{{#var:KERNEL_PAD_SIZE}}
*KERNEL_START_ADDRESS = '''{{#var:KERNEL_START_ADDRESS}}
*KERNEL_DTB_SECTION = '''{{#var:KERNEL_DTB_SECTION}}'''
*U-BOOT_GIT = '''{{#var:U-BOOT_GIT}}'''
*U-BOOT_BRANCH = '''{{#var:U-BOOT_BRANCH}}'''
*U-BOOT_SD_DEFCONFIG = '''{{#var:U-BOOT_SD_DEFCONFIG}}'''
*U-BOOT_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*UBOOT_CONFIG_FILE = '''{{#var:UBOOT_CONFIG_FILE}}
*SPL_SD_IMAGE_NAME = '''{{#var:U-BOOT_SD_IMAGE_NAME}}'''
*SD_TREE_SECTION = '''{{#var:SD_TREE_SECTION}}'''
*READ_ONLY_ROOTFS = '''{{#var:READ_ONLY_ROOTFS}}'''
*EMMC_FAT_PARTITION_NAME = '''{{#var:EMMC_FAT_PARTITION_NAME}}'''
*EMMC_ROOTFS_DEV = '''{{#var:EMMC_ROOTFS_DEV}}'''
*EMMC_ROOTFS_PARTITION_NUM = '''{{#var:EMMC_ROOTFS_PARTITION_NUM}}'''
*RAM_LOAD_ADDRESS = '''{{#var:RAM_LOAD_ADDRESS}}'''
*DTB_START_ADDRESS = '''{{#var:DTB_START_ADDRESS}}
*BUILD_DISTRO = '''{{#var:BUILD_DISTRO}}
*META_VARISCITE_BRANCH = '''{{#var:META_VARISCITE_BRANCH}}
*BUILD_FOLDER_XWAYLAND = = '''{{#var:BUILD_FOLDER_XWAYLAND}}
*BUILD_FOLDER_WAYLAND = = '''{{#var:BUILD_FOLDER_WAYLAND}}
*BUILD_FOLDER_X11 = = '''{{#var:BUILD_FOLDER_X11}}

Latest revision as of 20:08, 30 October 2024

Yocto

Documentation

Kirkstone 4.0

  • Yocto Project Core - Kirkstone 4.0

Documentation is available from www.docs.yoctoproject.org

Hardknott 3.3

  • Yocto Project Core - Hardknott 3.3

Documentation is available from www.docs.yoctoproject.org

Dunfell 3.1

  • Yocto Project Core - Dunfell 3.1

Documentation is available from www.yoctoproject.org

Thud 2.6.2

  • Yocto Project Core - Thud 2.6.2

Documentation is available from www.yoctoproject.org

Sumo 2.5

  • Yocto Project Core - Sumo 2.5

Documentation is available from www.yoctoproject.org

Rocko 2.4.3

  • Yocto Project Core - Rocko 2.4.3

Documentation is available from www.yoctoproject.org

Rocko 2.4.1

  • Yocto Project Core - Rocko 2.4.1

Documentation is available from www.yoctoproject.org

Rocko 2.4

  • Yocto Project Core - Rocko 2.4

Documentation is available from www.yoctoproject.org

Pyro 2.3.1

  • Yocto Project Core - Pyro 2.3.1 (released on 07/21/2017)

Documentation is available from www.yoctoproject.org

Morty 2.2.1

  • Yocto Project Core - Morty 2.2.1 (released on 02/24/2017)

Documentation is available from www.yoctoproject.org

FSLC BSP 2.5

  • FSL Community BSP Release Notes 2.5 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.4

  • FSL Community BSP Release Notes 2.4 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.3

  • FSL Community BSP Release Notes 2.3 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.2

  • FSL Community BSP Release Notes 2.2 documentation

Documentation is available from http://freescale.github.io

FSL BSP L4.9.88_2.0.0-ga

  • Kernel documentation from fsl-yocto-L4.9.88_2.0.0-ga release

Documentation is available for download from fsl-yocto-imx-4.9.88_2.0.0-docs

FSL BSP L4.9.11_1.0.0-ga

  • Kernel documentation from fsl-yocto-L4.9.11_1.0.0-ga release

Documentation is available for download from fsl-yocto-imx-4.9.11_1.0.0-docs

FSL BSP L4.1.15_2.0.0-ga

  • Kernel documentation from fsl-yocto-L4.1.15_2.0.0-ga release

Documentation is available for download from fsl-yocto-imx-4.1.15_2.0.0-docs


Scripts

Code::Blocks

TARGET_DIR="/home/root"
TARGET_IP="192.168.73.165"
TARGET_PORT="3000"
SSH_OPTIONS="-oStrictHostKeyChecking=no"



#!/bin/bash

readonly PROGRAM="$1"
PROGRAMNAME="$(basename $PROGRAM)"

. /home/user/bin/var-sdk.conf

echo "Deploying to target"

# prevent "Host key verification failed"
ssh-keygen -f "${HOME}/.ssh/known_hosts" -R "${TARGET_IP}"

# delete old binary
ssh ${SSH_OPTIONS} root@${TARGET_IP} "sh -c 'rm -rf ${TARGET_DIR}/${PROGRAMNAME}'"

# send the program to the target
scp ${PROGRAM} root@${TARGET_IP}:${TARGET_DIR}/${PROGRAMNAME}



#!/bin/bash

readonly PROGRAM="$1"
PROGRAMNAME="$(basename $PROGRAM)"

. /home/user/bin/var-sdk.conf

echo "Starting GDB Server on Target"

# kill gdbserver on target
ssh ${SSH_OPTIONS} root@${TARGET_IP} "sh -c '/usr/bin/killall -q gdbserver'"

# start gdbserver on target and fork
ssh ${SSH_OPTIONS} -t root@${TARGET_IP} "sh -c 'XDG_RUNTIME_DIR=/run/user/0 gdbserver localhost:${TARGET_PORT} ${TARGET_DIR}/${PROGRAMNAME}'" &


VAR-SOM-MX6

Build Results


Image Name
 Description
fsl-image-gui-. This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
fsl-image-gui-_256kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.
Linux kernel image, same binary for SD card/eMMC or NAND flash.
SPL built for SD card boot or eMMC boot.
SPL built for NAND flash.
U-Boot built for SD card boot or eMMC boot.
U-Boot built for NAND flash.
Device Tree Name
 SOM type
 Carrier Board type
 LCD Type
 Evaluation Kit name
uImage-imx6q-var-som-cap.dtb VAR-SOM-MX6_V2 (Quad / Dual) VAR-MX6CustomBoard Capacitive touch VAR-DVK-MX6_V2-PRO
VAR-STK-MX6_V2
uImage-imx6q-var-som-res.dtb VAR-SOM-MX6_V2 (Quad / Dual) VAR-MX6CustomBoard Resistive touch VAR-DVK-MX6_V2-PRO
VAR-STK-MX6_V2
uImage-imx6q-var-som-vsc.dtb VAR-SOM-MX6_V2 (Quad / Dual) VAR-SOLOCustomBoard Capacitive LVDS touch N/A
uImage-imx6dl-var-som-cap.dtb VAR-SOM-MX6_V2 (DualLite / Solo) VAR-MX6CustomBoard Capacitive touch N/A
uImage-imx6dl-var-som-res.dtb VAR-SOM-MX6_V2 (DualLite / Solo) VAR-MX6CustomBoard Resistive touch N/A
uImage-imx6dl-var-som-vsc.dtb VAR-SOM-MX6_V2 (DualLite / Solo) VAR-SOLOCustomBoard Capacitive LVDS touch N/A
uImage-imx6qp-var-som-cap.dtb VAR-SOM-MX6_V2 (QuadPlus / DualPlus) VAR-MX6CustomBoard Capacitive touch N/A
uImage-imx6qp-var-som-res.dtb VAR-SOM-MX6_V2 (QuadPlus / DualPlus) VAR-MX6CustomBoard Resistive touch N/A
uImage-imx6qp-var-som-vsc.dtb VAR-SOM-MX6_V2 (QuadPlus / DualPlus) VAR-SOLOCustomBoard Capacitive LVDS touch N/A
uImage-imx6dl-var-som-solo-cap.dtb VAR-SOM-SOLO / VAR-SOM-DUAL VAR-MX6CustomBoard Capacitive touch N/A
uImage-imx6dl-var-som-solo-res.dtb VAR-SOM-SOLO / VAR-SOM-DUAL VAR-MX6CustomBoard Resistive touch N/A
uImage-imx6dl-var-som-solo-vsc.dtb VAR-SOM-SOLO / VAR-SOM-DUAL VAR-SOLOCustomBoard Capacitive LVDS touch VAR-DVK-SOLO/DUAL
VAR-STK-SOLO/DUAL
uImage-imx6q-var-dart.dtb DART-MX6 VAR-DT6CustomBoard Capacitive LVDS touch VAR-DVK-DT6
VAR-STK-DT6


Device trees

Build individual device trees:

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-solo-cap.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-solo-res.dtb

Build the device tree for VAR-SOM-SOLO on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-solo-vsc.dtb

Build the device tree for DART-MX6:
$ make -j4 imx6q-var-dart.dtb


Device trees with Symphony-Board

Build individual device trees:

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on Symphony-Board:
$ make -j4 imx6dl-var-som-symphony.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on Symphony-Board:
$ make -j4 imx6q-var-som-symphony.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on Symphony-Board:
$ make -j4 imx6qp-var-som-symphony.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-solo-cap.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-solo-res.dtb

Build the device tree for VAR-SOM-SOLO on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-solo-vsc.dtb

Build the device tree for VAR-SOM-SOLO on Symphony-Board:
$ make -j4 imx6dl-var-som-solo-symphony.dtb

Build the device tree for DART-MX6:
$ make -j4 imx6q-var-dart.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-vsc.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage


SD card image file tree with Symphony-Board

/opt/images/
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-symphony.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-symphony.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-symphony.dtb
    ├── imx6qp-var-som-vsc.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage


Flash Recovery SD from GUI

Flash from GUI

VAR-SOM-MX6 Pyro Recovery.png

Click the appropriate button:

  • Install Yocto SOLOCB NAND: Flash Yocto on NAND flash, on VAR-SOLOCustomBoard
  • Install Yocto SOLOCB eMMC: Flash Yocto on eMMC, on VAR-SOLOCustomBoard
  • Install Yocto MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on VAR-MX6CustomBoard
  • Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on VAR-MX6CustomBoard
  • Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX6CustomBoard
  • Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX6CustomBoard
  • Install Yocto DART (eMMC): Flash Yocto on eMMC, on VAR-DT6CustomBoard


Flash from GUI

For this Yocto release, NXP/Vivante do no longer provide GPU accelerations for X11 native backend.

The default backend is now XWayland: Wayland accelerated backend with basic (not accelerated) X11 emulation.

Only "Flash from command line" is supported.


Setting the Boot Mode

Follow the instruction below according to the appropriate carrier board type:

MX6CustomBoard

Booting your MX6CustomBoard system from SD card requires pushing the middle button while powering up the system. See picture below.

Mx6 boot.jpg

To boot a board using an SD card, follow the steps below:

  • Power-off the board.
  • Insert the SD card into the SD/MMC slot of the carrier board (DVK)
  • Push the middle button (Boot Select) and hold
  • Power-up the board
  • Release the middle button (Boot Select) after system starts to boot.
  • The board will automatically boot into Linux from the SD card

SoloCustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from MMC". See picture below.

Solo boot.jpg

To boot board with SD card, Follow the steps below:

  • Power-off the board.
  • Insert the SD card into the SD/MMC slot of the carrier board (DVK)
  • Switch the relevant DIP switch to "Boot from MMC"
  • Power-up board
  • The board will automatically boot into Linux from SD card

DT6CustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from SD card". See picture below.

Dart boot.jpg

To boot board with SD card, Follow the steps below:

  • Power-off the board.
  • Insert the SD card into the SD/MMC slot of the carrier board (DVK)
  • Switch the relevant DIP switch to "Boot from SD card"
  • Power-up board
  • The board will automatically boot into Linux from SD card



DART-6UL

Build Results

Image Name
 How to use
fsl-image-gui-.sdcard This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
fsl-image-gui-.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash.
Linux kernel image, same binary for SD card/eMMC or NAND flash.
SPL built for SD card boot or eMMC boot.
SPL built for NAND flash.
U-Boot built for SD card boot or eMMC boot.
U-Boot built for NAND flash.
File Name Description
zImage-imx6ul-var-dart-emmc_wifi.dtb Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)


Image Name
 How to use
fsl-image-gui-. This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
Linux kernel image, same binary for SD card/eMMC or NAND flash.
SPL built for SD card boot or eMMC boot.
SPL built for NAND flash.
U-Boot built for SD card boot or eMMC boot.
U-Boot built for NAND flash.
File Name Description
zImage-imx6ul-var-dart-emmc_wifi.dtb Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-5g-emmc_wifi.dtb Device tree blob for DART-6UL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-5g-nand_wifi.dtb Device tree blob for DART-6UL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-5g-emmc_wifi.dtb Device tree blob for DART-6ULL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-5g-nand_wifi.dtb Device tree blob for DART-6ULL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)


Image Name
 How to use
fsl-image-gui-. This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
Linux kernel image, same binary for SD card/eMMC or NAND flash.
SPL built for SD card boot or eMMC boot.
SPL built for NAND flash.
U-Boot built for SD card boot or eMMC boot.
U-Boot built for NAND flash.
File Name Description
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)


Image Name
 How to use
fsl-image-gui-. This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
Linux kernel image, same binary for SD card/eMMC or NAND flash.
SPL built for SD card boot or eMMC boot.
SPL built for NAND flash.
U-Boot built for SD card boot or eMMC boot.
U-Boot built for NAND flash.
File Name Description
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-concerto-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-concerto-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-concerto-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-symphony-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-symphony-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-symphony-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-symphony-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-symphony-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-symphony-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-symphony-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-symphony-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-symphony-board-emmc-sd-card.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-symphony-board-emmc-wifi.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-symphony-board-nand-sd-card.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-symphony-board-nand-wifi.dtb Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)


Device tree

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb



Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb



Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb



Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-symphony-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-symphony-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-symphony-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-symphony-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-symphony-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-symphony-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-symphony-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-symphony-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-symphony-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-symphony-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-symphony-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-symphony-board-nand-wifi.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage



/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage



/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage



/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage



/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ull-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ull-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ull-var-som-symphony-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ul-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-symphony-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage


Flash Recovery SD from GUI

Flash from GUI

DART-6UL Recovery Sumo.png

Touch/Click on the appropriate icon:

  • Install Yocto NAND, WiFi: Flash Yocto with WiFi support to NAND flash
  • Install Yocto NAND, SD card: Flash Yocto with SD card support to NAND flash
  • Install Yocto eMMC (SD/WiFi) : Flash Yocto to eMMC (installs both SD card and WiFi dtbs to the BOOT partition and let U-Boot select between them at boot time)


Setting the Boot Mode

Booting your system from an SD card requires switching the Boot DIP switches. See picture below.

Boot switch 6ul1.jpg
  • "00" The current position in the picture will set the system to boot from SD card
  • "01" Moving the right switch will set the system to boot from eMMC
  • "10" Moving the left switch will set the system to boot from NAND flash
  • "11" is illegal.
Be aware that your system has eMMC or NAND but never both.


Booting your system from an SD card requires switching the Boot DIP switches. See picture below.
On the VAR-6ULCustomBoard (with a DART-6UL):

Boot switch 6ul1.jpg
  • "00" The current position in the picture will set the system to boot from SD card
  • "01" Moving the right switch will set the system to boot from eMMC
  • "10" Moving the left switch will set the system to boot from NAND flash
  • "11" is illegal.
Be aware that your system has eMMC or NAND but never both.



On the Concerto-Board (with a VAR-SOM-6UL):

Boot switch concerto.jpg
  • ON-EXT: Boot from the external storage (SD card) - the current position in the picture
  • OFF-INT: Boot from the SOM's internal storage (eMMC/NAND flash)


Using only one Ethernet port

Apply the following patch to the Linux kernel source, for removing the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy: 

diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
index f79a356..032ed00 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
@@ -159,17 +159,6 @@
 	phy-reset-on-resume;
 	phy-handle = <&ethphy0>;
 	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	phy-reset-gpios=<&gpio1 10 1>;
-	phy-reset-duration=<100>;
-	phy-reset-on-resume;
-	status = "okay";
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -181,14 +170,6 @@
 			clock-names = "rmii-ref";
 			reg = <1>;
 		};
-
-		ethphy1: ethernet-phy@3 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			micrel,rmii-reference-clock-select-25-mhz;
-			clocks = <&rmii_ref_clk>;
-			clock-names = "rmii-ref";
-			reg = <3>;
-		};
 	};
 };
 
@@ -460,8 +441,8 @@
 			fsl,pins = <
 				MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0	/* User LED */
 				MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059	/* User Button */
-				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
 #ifdef WIFI
 				MX6UL_PAD_GPIO1_IO03__REF_CLK_32K	0x03029	/* WLAN Slow Clock */
 #endif
@@ -481,20 +462,6 @@
 			>;
 		};
 
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-				MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
-			>;
-		};
-
 		pinctrl_flexcan1: flexcan1grp{
 			fsl,pins = <
 				MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020

Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.
- In older kernel releases where there is no imx6ul-imx6ull-var-dart-common.dtsi file, the relevant file to edit is called imx6ul-var-dart.dtsi


To remove the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:
Edit the dtsi file of the reference carrier board in the Linux kernel source and remove the &fec1 and &fec2 nodes from it.
In case of the VAR-6ULCustomBoard (DART-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-dart-6ulcustomboard.dtsi.
In case of the Concerto-Board (VAR-SOM-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-som-concerto-board.dtsi.
The above will result in using the &fec1 node from the dtsi file of the SOM, as is (as the phy of the first Ethernet port is on the SOM), without adding the second port (which its phy is on the reference carrier board).
Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.


VAR-SOM-MX7

Build Results

Image Name
 How to use
fsl-image-gui-. This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
Linux kernel image, same binary for SD card/eMMC or NAND flash.
SPL built for SD card boot or eMMC boot.
SPL built for NAND flash.
U-Boot built for SD card boot or eMMC boot.
U-Boot built for NAND flash.
File Name Description
zImage-imx7d-var-som-emmc.dtb Device tree blob for SOMs with eMMC.
zImage-imx7d-var-som-nand.dtb Device tree blob for SOMs with NAND flash.
zImage-imx7d-var-som-emmc-m4.dtb Device tree blob for SOMs with eMMC and M4 support.
zImage-imx7d-var-som-nand-m4.dtb Device tree blob for SOMs with NAND flash and M4 support.


Device tree

Build only the device tree for VAR-SOM-MX7 with eMMC:
$ make -j4 imx7d-var-som-emmc.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash:
$ make -j4 imx7d-var-som-nand.dtb

Build only the device tree for VAR-SOM-MX7 with eMMC and M4 support:
$ make -j4 imx7d-var-som-emmc-m4.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash and M4 support:
$ make -j4 imx7d-var-som-nand-m4.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── u-boot.imx-nand
    ├── u-boot.imx-sd
    └── zImage



/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage



/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage


Flash Recovery SD from GUI

Flash from GUI

VAR-SOM-MX7 Rocko Recovery.png

Touch/Click on the appropriate icon:

  • Install Yocto NAND flash: Flash Yocto to NAND flash
  • Install Yocto eMMC: Flash Yocto to eMMC


Setting the Boot Mode

Make sure the BOOT SELECT DIP switches on the carrier board are set correctly before you power on the board. 

SW1-SW2
 0 - 0 : Boot from SD card
 1 - 0 : Boot from eMMC
 0 - 1 : Boot from NAND flash
 1 - 1 : Illegal
The VAR-SOM-MX7 SOM comes with either NAND or eMMC, but not both.


DART-MX8M

Build Results

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb Device tree blob for eMMC, WIFI and HDMI display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb Device tree blob for eMMC, WIFI and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb Device tree blob for eMMC, WIFI and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb Device tree blob for SD, eMMC and HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb Device tree blob for SD, eMMC and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb Device tree blob for SD, eMMC and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb Device tree blob for SD, eMMC and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration.


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds.dtb DTB for DART-MX8M with SD card and LCDIF LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb DTB for DART-MX8M with SD card and LCDIF LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
Image.gz-fsl-imx8mq-var-dart-sd-dp.dtb DTB for DART-MX8M with SD card and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi.dtb DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds.dtb DTB for DART-MX8M with SD card and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-dp.dtb DTB for DART-MX8M with SD card and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-cb12.dtb DTB for DART-MX8M with SD card and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-dp.dtb DTB for DART-MX8M with WIFI and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi.dtb DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds.dtb DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-dp.dtb DTB for DART-MX8M with WIFI and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-dp.dtb DTB for DART-MX8M with M4, SD card and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi.dtb DTB for DART-MX8M with M4, SD card and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds.dtb DTB for DART-MX8M with M4, SD card and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb DTB for DART-MX8M with M4, SD card and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb DTB for DART-MX8M with M4, SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb DTB for DART-MX8M with M4, SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb DTB for DART-MX8M with M4, SD card and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb DTB for DART-MX8M with M4, SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-dp.dtb DTB for DART-MX8M with M4, WIFI and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb DTB for DART-MX8M with M4, WIFI and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds.dtb DTB for DART-MX8M with M4, WIFI and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb DTB for DART-MX8M with M4, WIFI and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb DTB for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb DTB for DART-MX8M with M4, WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb DTB for DART-MX8M with M4, WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb DTB for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.


Image Name
 How to use
fsl-image-gui-.wic.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display.


Image Name
 How to use
fsl-image-gui-.wic.zst This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.zst Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard with M4, WIFI and dual LVDS+HDMI display.


Basler Camera

local.conf

IMAGE_INSTALL_append = " \
	basler-camera-driver \
	pylon \
	python3-pypylon \
	gentl-producer \
	xauth \
"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-basler-camera-driver"



ACCEPT_BASLER_EULA = "1"
IMAGE_INSTALL_append = "packagegroup-dart-bcon-mipi"


E-con Camera

local.conf

IMAGE_INSTALL_append = " \
       econ-camera-driver \
"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-econ-camera-driver"


Device tree

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI 4K display support:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi-4k.dtb

Build only the device tree for DART-MX8M with WIFI and DCSS LVDS display support:
$ make -j4 imx8m-var-dart-emmc-wifi-dcss-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and LCDIF LVDS display support:
$ make -j4 imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 imx8m-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M with SD, and HDMI display support:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M with SD, and HDMI 4K display support:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi-4k.dtb

Build only the device tree for DART-MX8M with SD, and DCSS LVDS display support:
$ make -j4 imx8m-var-dart-sd-emmc-dcss-lvds.dtb

Build only the device tree for DART-MX8M with SD, and LCDIF LVDS display support:
$ make -j4 imx8m-var-dart-sd-emmc-lcdif-lvds.dtb

Build only the device tree for DART-MX8M with SD, and dual LVDS+HDMI display support:
$ make -j4 imx8m-var-dart-sd-emmc-dual-display.dtb




Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M with SD, and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M with SD, and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-lvds.dtb

Build only the device tree for DART-MX8M with SD, and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb




Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-dp.dtb

Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-hdmi.dtb

Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-dp.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb



Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-sd-dp.dtb

Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-sd-hdmi.dtb

Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-dp.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb



Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-dp.dtb

Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb

Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-dp.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb



Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb



Build only the device tree for DART-MX8M on DT8MCustomBoard with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz


SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_dp_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk_no_hdmi
    ├── imx-boot-sd.bin -> imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    └── rootfs.tar.gz



DTB File Name
 Description
imx8m-var-dart-emmc-wifi-hdmi.dtb Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-hdmi-4k.dtb Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dcss-lvds.dtb Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dual-display.dtb Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
imx8m-var-dart-sd-emmc-hdmi.dtb Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-hdmi-4k.dtb Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dcss-lvds.dtb Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-lcdif-lvds.dtb Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dual-display.dtb Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.


DTB File Name
 Description
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb Device tree blob for SD, eMMC and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.


DTB File Name
 Description
fsl-imx8mq-var-dart-sd-dp.dtb Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-hdmi.dtb Device tree blob for eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds.dtb Device tree blob for eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-dp.dtb Device tree blob for eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb Device tree blob for eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-wifi-dp.dtb Device tree blob for eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-hdmi.dtb Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds.dtb Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-dp.dtb Device tree blob for eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-sd-dp.dtb Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-hdmi.dtb Device tree blob for M4, eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds.dtb Device tree blob for M4, eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb Device tree blob for M4, eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb Device tree blob for M4, eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-wifi-dp.dtb Device tree blob for M4, eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb Device tree blob for M4, eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds.dtb Device tree blob for M4, eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb Device tree blob for M4, eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb Device tree blob for M4, eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.


DTB File Name
 Description
imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V2.x and above with M4, WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display.


Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board. 

SW7
 0 : Boot from SD card
 1 : Boot from eMMC


DART-MX8M-MINI

Build Results

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
fsl-imx8mm-var-dart.dtb Device tree blob for DART-MX8M-MINI
fsl-imx8mm-var-som.dtb Device tree blob for VAR-SOM-MX8M-MINI
fsl-imx8mm-var-som-rev10.dtb Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
Expression error: Unexpected > operator. Device tree blob for DART-MX8M-MINI
Expression error: Unexpected > operator. Device tree blob for VAR-SOM-MX8M-MINI
Expression error: Unexpected > operator. Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mm-var-dart-customboard.dtb Device tree blob for DART-MX8M-MINI on DT8MCustomBoard
imx8mm-var-dart-customboard-m4.dtb Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard
imx8mm-var-som-symphony.dtb Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-m4.dtb Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-legacy.dtb Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
imx8mm-var-som-symphony-legacy-m4.dtb Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mm-var-dart-dt8mcustomboard.dtb Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V2.x and above
imx8mm-var-dart-dt8mcustomboard-m4.dtb Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V2.x and above
imx8mm-var-dart-dt8mcustomboard-legacy.dtb Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V1.x
imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V1.x
imx8mm-var-som-symphony.dtb Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-m4.dtb Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-legacy.dtb Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
imx8mm-var-som-symphony-legacy-m4.dtb Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mm-var-dart-dt8mcustomboard.dtb Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V2.x and above
imx8mm-var-dart-dt8mcustomboard-m4.dtb Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V2.x and above
imx8mm-var-dart-dt8mcustomboard-legacy.dtb Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V1.x
imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V1.x
imx8mm-var-som-symphony.dtb Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board
imx8mm-var-som-symphony-m4.dtb Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board


Device tree

Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-dart.dtb

Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/fsl-imx8mm-var-var-som-rev10.dtb



Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-dart.dtb

Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/imx8mm-var-som-rev10.dtb




Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-dart-customboard.dtb

Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/imx8mm-var-som-rev10-symphony.dtb




Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard:
$ make -j4 freescale/imx8mm-var-dart-customboard.dtb

Build only the device tree for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard:
$ make -j4 freescale/imx8mm-var-dart-customboard-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy-m4.dtb




Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard.dtb

Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-m4.dtb

Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy.dtb

Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy-m4.dtb




Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard.dtb

Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-m4.dtb

Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy.dtb

Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz


Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board. 

SW7
 0 : Boot from SD card
 1 : Boot from eMMC


VAR-SOM-MX93

Build Results

Template:MX93 BUILD RESULTS V1



Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx93-var-som-symphony.dtb Device tree for VAR-SOM-MX93 on Symphony-Board
imx93-var-som-symphony-ld.dtb Device tree for VAR-SOM-MX93 with Low Drive mode on Symphony-Board
imx93-var-som-wbe-symphony.dtb Device tree for VAR-SOM-MX93 with WBE support on Symphony-Board
imx93-var-som-wbe-symphony-ld.dtb Device tree for VAR-SOM-MX93 with Low Drive mode, and WBE support on Symphony-Board
imx93-var-som-symphony-m33.dtb Device tree for VAR-SOM-MX93 with Cortex-M33 on Symphony-Board



Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx93-var-som-symphony.dtb Device tree for VAR-SOM-MX93 on Symphony-Board
imx93-var-som-symphony-ld.dtb Device tree for VAR-SOM-MX93 with Low Drive mode on Symphony-Board
imx93-var-som-wbe-symphony.dtb Device tree for VAR-SOM-MX93 with WBE support on Symphony-Board
imx93-var-som-wbe-symphony-ld.dtb Device tree for VAR-SOM-MX93 with Low Drive mode, and WBE support on Symphony-Board
imx93-var-som-symphony-m33.dtb Device tree for VAR-SOM-MX93 with Cortex-M33 on Symphony-Board
imx93-var-dart-dt8mcustomboard.dtb Device tree for DART-MX93 on DT8MCustomBoard
imx93-var-dart-dt8mcustomboard.dtb Device tree for DART-MX93 with Low Drive mode, and WBE support on DT8MCustomBoard


DART-MX95

Build Results


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx95-var-dart-dt8mcustomboard.dtb Device tree for DART-MX95 on DT8MCustomBoard


MX95 Device tree v1

Build only the device tree for DART-MX95 on Symphony-Board:
$ make -j4 freescale/imx95-var-dart-dt8mcustomboard.dtb


VAR-SOM-MX8M-NANO

Build Results

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
Image.gz-fsl-imx8mn-var-som.dtb Device tree blob for SD, eMMC, WIFI and LVDS display configuration.


Build Results v2

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
Image.gz-fsl-imx8mn-var-som.dtb Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
Image.gz-fsl-imx8mn-var-som-rev10.dtb Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0.
Image.gz-fsl-imx8mn-var-som-m7.dtb Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration.
Image.gz-fsl-imx8mn-var-som-rev10-m7.dtb Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration rev 1.0.


Build Results v3

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mn-var-som.dtb Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
imx8mn-var-som.dtb Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0.


Build Results v4

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mn-var-som-symphony.dtb Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
imx8mn-var-som-symphony-m7.dtb Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4A and above
imx8mn-var-som-symphony-legacy.dtb Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
imx8mn-var-som-symphony-legacy-m7.dtb Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4 and below


Build Results v5

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mn-var-som-symphony.dtb Device tree for VAR-SOM-MX8M-NANO on Symphony-Board
imx8mn-var-som-symphony-m7.dtb Device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board


Device tree

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb


Device tree v2

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/fsl-imx8mn-var-som-rev10.dtb

Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7:
$ make -j4 freescale/fsl-imx8mn-var-som-m7.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0 with Cortex-M7:
$ make -j4 freescale/fsl-imx8mn-var-som-rev10-m7.dtb


Device tree v3

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/imx8mn-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/imx8mn-var-som-rev10.dtb


Device tree v4

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/imx8mn-var-som-rev10-symphony.dtb


Device tree v5

Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mn-var-som-symphony-m7.dtb

Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mn-var-som-symphony-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mn-var-som-symphony-legacy-m7.dtb


Device tree v6

Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board:
$ make -j4 freescale/imx8mn-var-som-symphony-m7.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz


SD card image file tree AM62

/opt/images/
└── Yocto
    └── rootfs.tar.zst
    └── boot
        └── tiboot3.bin
        └── uEnv.txt
        └── tispl.bin
        └── u-boot.img


SD card image file tree AM33

/opt/images/
└── Yocto
    └── rootfs.ubi
    └── boot
        └── MLO-nand
        └── u-boot.img-nand
        └── var-som-am33.dtb
        └── zImage


Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board. 

SW3
 0 : Boot from SD card
 1 : Boot from eMMC


MX93 Device tree v1

Build only the device tree for VAR-SOM-MX93 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony.dtb



Build only the device tree for VAR-SOM-MX93 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX93 with Low Drive mode on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-ld.dtb

Build only the device tree for VAR-SOM-MX93 with WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony.dtb

Build only the device tree for VAR-SOM-MX93 with Low Drive mode, and WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony-ld.dtb

Build only the device tree for VAR-SOM-MX93 with Cortex-M33 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-m33.dtb



Build only the device tree for VAR-SOM-MX93 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX93 with Low Drive mode on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-ld.dtb

Build only the device tree for VAR-SOM-MX93 with WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony.dtb

Build only the device tree for VAR-SOM-MX93 with Low Drive mode, and WBE support on Symphony-Board:
$ make -j4 freescale/imx93-var-som-wbe-symphony-ld.dtb

Build only the device tree for VAR-SOM-MX93 with Cortex-M33 on Symphony-Board:
$ make -j4 freescale/imx93-var-som-symphony-m33.dtb

Build only the device tree for DART-MX93 on DT8MCustomBoard:
$ make -j4 freescale/imx93-var-dart-dt8mcustomboard.dtb

Build only the device tree for DART-MX93 with Low Drive mode on DT8MCustomBoard:
$ make -j4 freescale/imx93-var-dart-dt8mcustomboard-ld.dtb


DART-MX8M-PLUS

Basler Camera

local.conf for Zeus 2.3.0

IMAGE_INSTALL_append = " \
	basler-camera-driver \
	pylon \
	python3-pypylon \
	gentl-producer \
	kernel-module-isp-vvcam \
	imx8mp-modprobe-config \
	basler-camera \
	isp-imx \
	xauth \
"
PREFERRED_VERSION_isp-imx                 = "4.2.2.8+basler"
PREFERRED_VERSION_basler-camera           = "4.2.2.8+basler"
PREFERRED_VERSION_kernel-module-isp-vvcam = "4.2.2.8+basler"


local.conf for Zeus 2.3.2

IMAGE_INSTALL_append = " \
	kernel-module-basler-camera \
	pylon \
	python3-pypylon \
	gentl-producer \
	kernel-module-isp-vvcam \
	imx8mp-modprobe-config \
	basler-camera \
	isp-imx \
	xauth \
"
PREFERRED_VERSION_isp-imx                 = "4.2.2.13+basler"
PREFERRED_VERSION_basler-camera           = "4.2.2.13+basler"
PREFERRED_VERSION_kernel-module-isp-vvcam = "4.2.2.13+basler"


local.conf for Hardknott

IMAGE_INSTALL_append = " \
       pylon \
       python3-pypylon \
       gentl-producer \
       xauth \
       kernel-module-basler-camera \
"
IMAGE_INSTALL_append_mx8mp = " \
       imx8mp-modprobe-config \
       kernel-module-isp-vvcam \
       isp-imx \
       basler-camera \
"
PREFERRED_VERSION_isp-imx                 = "4.2.2.14+basler"
PREFERRED_VERSION_basler-camera           = "4.2.2.14+basler"
PREFERRED_VERSION_kernel-module-isp-vvcam = "4.2.2.14+basler"


local.conf for Hardknott with NXP support

IMAGE_INSTALL_append_mx8mp = " \
       kernel-module-isp-vvcam \
       isp-imx \
       basler-camera \
"


Gestreamer for Zeus 2.3.0

The following commands apply to VCAM-AR0821B (daA3840-mc) only.
Run the following command at the shell prompt: 

$ gst-launch-1.0 -v v4l2src device=/dev/video0 ! waylandsink sync=false


Gestreamer for Zeus 2.3.2

The following commands apply to VCAM-AR0821B (daA3840-mc) only.
Run the following commands at the shell prompt:

  • 1920x1080@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video0 ! "video/x-raw,format=YUY2,width=1920,height=1080" ! waylandsink sync=false
  • 3840x2160@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video0 ! "video/x-raw,format=YUY2,width=3840,height=2160" ! waylandsink sync=false


Gestreamer for Kirkstone

Using the Basler gst-plugin-pylon plugin

Gstreamer is supported with Basler cameras by the Basler gst-plugin-pylon plugin.
This plugin is already installed in any Basler-compatible Yocto image, either prebuilt or built as described above.
To display the video stream run the following command at the shell prompt: 

# gst-launch-1.0 pylonsrc ! videoconvert ! autovideosink

For further information, see: https://github.com/basler/gst-plugin-pylon

Using the v4l2-compatible video source

For VCAM-AR0821B (daA3840-mc) and VCAM-AR0521B (daA2500-60mc), a v4l2-compatible video source is also available.
To display the video stream in this mode, run the following commands at the shell prompt:

  • 1920x1080@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video2 ! "video/x-raw,format=YUY2,width=1920,height=1080" ! waylandsink sync=false
  • 3840x2160@30fps:
# gst-launch-1.0 -v v4l2src device=/dev/video2 ! "video/x-raw,format=YUY2,width=3840,height=2160" ! waylandsink sync=false


Gstreamer is supported with Basler cameras by the Basler gst-plugin-pylon plugin.
This plugin is already installed in any Basler-compatible Yocto image, either prebuilt or built as described above.
To display the video stream run the following command at the shell prompt: 

# gst-launch-1.0 pylonsrc ! videoconvert ! autovideosink

For further information, see: https://github.com/basler/gst-plugin-pylon


Switch cameras for Hardknott

# cd /boot
# ln -fs imx8mp-var-dart-dt8mcustomboard-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-legacy-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard-legacy.dtb
# ln -fs imx8mp-var-som-symphony-basler-isp0.dtb imx8mp-var-som-symphony.dtb

To switch back run the following commands at the shell prompt: 

# cd /boot
# ln -fs imx8mp-var-dart-dt8mcustomboard-basler-isi0.dtb imx8mp-var-dart-dt8mcustomboard.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-legacy-basler-isi0.dtb imx8mp-var-dart-dt8mcustomboard-legacy.dtb
# ln -fs imx8mp-var-som-symphony-basler-isi0.dtb imx8mp-var-som-symphony.dtb


Switch cameras for Hardknott with NXP support

# cd /boot
# mv imx8mp-var-dart-dt8mcustomboard.dtb imx8mp-var-dart-dt8mcustomboard-ov5640.dtb
# mv imx8mp-var-dart-dt8mcustomboard-legacy.dtb imx8mp-var-dart-dt8mcustomboard-legacy-ov5640.dtb
# mv imx8mp-var-som-symphony.dtb imx8mp-var-som-symphony-ov5640.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard.dtb
# ln -fs imx8mp-var-dart-dt8mcustomboard-legacy-basler-isp0.dtb imx8mp-var-dart-dt8mcustomboard-legacy.dtb
# ln -fs imx8mp-var-som-symphony-basler-isp0.dtb imx8mp-var-som-symphony.dtb


Gestreamer for Hardknott with NXP support

$ gst-launch-1.0 -v v4l2src device=/dev/video0 ! waylandsink


Gestreamer for Kirkstone with NXP support

$ gst-launch-1.0 -v v4l2src device=/dev/video2 ! waylandsink


Gestreamer for Kirkstone with NXP support and dual-camera enabled

# gst-launch-1.0 -v v4l2src device=/dev/video2 ! waylandsink

On boards with 2 cameras you can use the 2nd camera by replacing /dev/video2 with /dev/video3 in the above command. Dual camera currently can only work on VAR-DT8MCustomBoard due to hardware limitations of Symphony board.
The following command will simultaneously record two video streams from both cameras: 

# gst-launch-1.0 v4l2src device=/dev/video2 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! vpuenc_h264 ! avimux ! filesink location=./test0_h264.avi \
                 v4l2src device=/dev/video3 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! vpuenc_h264 ! avimux ! filesink location=./test1_h264.avi


Build Results

Image Name
 How to use
fsl-image-gui-.wic.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mp-var-dart.dtb Device tree blob for DART-MX8M-PLUS
imx8mp-var-som.dtb Device tree blob for VAR-SOM-MX8M-PLUS
imx8mp-var-som-ov5640.dtb Device tree blob for VAR-SOM-MX8M-PLUS with a 2nd OV5640 camera


Image Name
 How to use
fsl-image-gui-.wic.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8mp-var-dart-dt8mcustomboard.dtb Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V2.x and above
imx8mp-var-dart-dt8mcustomboard-legacy.dtb Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V1.x
imx8mp-var-som-symphony.dtb Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board
imx8mp-var-som-symphony-2nd-ov5640.dtb Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera
imx8mp-var-dart-dt8mcustomboard-m7.dtb Device tree blob for DART-MX8M-PLUS with Cortex-M7 on DT8MCustomBoard V2.x and above
imx8mp-var-dart-dt8mcustomboard-legacy-m7.dtb Device tree blob for DART-MX8M-PLUS with Cortex-M7 on DT8MCustomBoard V1.x
imx8mp-var-som-symphony-m7.dtb Device tree blob for VAR-SOM-MX8M-PLUS with Cortex-M7 on Symphony-Board
imx8mp-var-som-symphony-2nd-ov5640-m7.dtb Device tree blob for VAR-SOM-MX8M-PLUS with Cortex-M7 on Symphony-Board with a 2nd OV5640 camera


Device tree

Build only the device tree for DART-MX8M-PLUS:
$ make -j4 freescale/imx8mp-var-dart.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS:
$ make -j4 freescale/imx8mp-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS with second OV5640 camera:
$ make -j4 freescale/imx8mp-var-som-ov5640.dtb




Build only the device tree for DART-MX8M-PLUS on DT8MCustomBoard V2.x and above:
$ make -j4 freescale/imx8mp-var-dart-dt8mcustomboard.dtb

Build only the device tree for DART-MX8M-PLUS on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mp-var-dart-dt8mcustomboard-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS on Symphony-Board:
$ make -j4 freescale/imx8mp-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera:
$ make -j4 freescale/imx8mp-var-som-symphony-2nd-ov5640.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz


Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board. 

SW7
 0 : Boot from SD card
 1 : Boot from eMMC


VAR-SOM-MX8X

Build Results

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
DTB File Name
 Description
fsl-imx8qxp-var-som-wifi.dtb Device tree blob for WIFI configuration. SD card disabled.
fsl-imx8qxp-var-som-sd.dtb Device tree blob for SD configuration. WIFI disabled.


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
DTB File Name
 Description
imx8qxp-var-som-symphony-wifi.dtb Device tree blob for WIFI configuration. SD card disabled.
imx8qxp-var-som-symphony-wifi-m4.dtb Device tree blob for WIFI configuration, with Cortex-M4 support. SD card disabled.
imx8qxp-var-som-symphony-sd.dtb Device tree blob for SD configuration. WIFI disabled.
imx8qxp-var-som-symphony-sd-m4.dtb Device tree blob for SD configuration, with Cortex-M4 support. WIFI disabled.


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
DTB File Name
 Description
fsl-imx8qxp-var-som-wifi.dtb Device tree blob for WIFI configuration. SD card disabled.
fsl-imx8qxp-var-som-sd.dtb Device tree blob for SD configuration. WIFI disabled.


Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
DTB File Name
 Description
imx8qxp-var-som-symphony-wifi.dtb Device tree blob for WIFI configuration. SD card disabled.
imx8qxp-var-som-symphony-wifi-m4.dtb Device tree blob for WIFI configuration, with Cortex-M4 support. SD card disabled.
imx8qxp-var-som-symphony-sd.dtb Device tree blob for SD configuration. WIFI disabled.
imx8qxp-var-som-symphony-sd-m4.dtb Device tree blob for SD configuration, with Cortex-M4 support. WIFI disabled.


Device tree

Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-wifi.dtb

Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-sd.dtb



Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/imx8qxp-var-som-symphony-wifi.dtb

Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/imx8qxp-var-som-symphony-sd.dtb


SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz


Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board. 

SW3
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)


VAR-SOM-MX8

Build Results

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
Image.gz-fsl-imx8qm-var-som-dp.dtb DTB file for VAR-SOM-MX8 with DP display
Image.gz-fsl-imx8qm-var-som-hdmi.dtb DTB file for VAR-SOM-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-som-lvds.dtb DTB file for VAR-SOM-MX8 with LVDS display
Image.gz-fsl-imx8qm-var-spear-dp.dtb DTB file for SPEAR-MX8 with DP display
Image.gz-fsl-imx8qm-var-spear-hdmi.dtb DTB file for SPEAR-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-spear-lvds.dtb DTB file for SPEAR-MX8 with LVDS display

Similar device trees with "imx8qp-" instead of "imx8qm-" are also generated, for SOMs with the i.MX8QP variant of the SoC.


Build Results v2

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8qm-var-som-dp.dtb DTB file for VAR-SOM-MX8 with DP display
imx8qm-var-som-hdmi.dtb DTB file for VAR-SOM-MX8 with HDMI display
imx8qm-var-som-lvds.dtb DTB file for VAR-SOM-MX8 with LVDS display
imx8qm-var-spear-dp.dtb DTB file for SPEAR-MX8 with DP display
imx8qm-var-spear-hdmi.dtb DTB file for SPEAR-MX8 with HDMI display
imx8qm-var-spear-lvds.dtb DTB file for SPEAR-MX8 with LVDS display

Similar device trees starting with "imx8qp-" are also generated, for SOMs with the i.MX8QP variant of the SoC.


Build Results v3

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8qm-var-som-dp.dtb DTB file for VAR-SOM-MX8 with DP display
imx8qm-var-som-hdmi.dtb DTB file for VAR-SOM-MX8 with HDMI display
imx8qm-var-som-lvds.dtb DTB file for VAR-SOM-MX8 with LVDS display
imx8qm-var-spear-dp.dtb DTB file for SPEAR-MX8 with DP display
imx8qm-var-spear-hdmi.dtb DTB file for SPEAR-MX8 with HDMI display
imx8qm-var-spear-lvds.dtb DTB file for SPEAR-MX8 with LVDS display

Similar device trees starting with "imx8qp-" are also generated, for SOMs with the i.MX8QP variant of the SoC.


Build Results v4

Image Name
 How to use
fsl-image-gui-.sdcard.gz This image is for SD card boot.
It can be flashed as-is on an SD card that can then be used to boot your system,
according to the relevant startup-guide of your product
(usually requires to press the boot select button, or toggle a DIP switch).
For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz Tarball with rootfs files.
Can be used to create an NFS root file system on the host.
See the Yocto Setup TFTP/NFS section for more info.
Also used to create our extended SD card.
See the Create a bootable SD card section below.
Linux kernel image, same binary for SD card and eMMC.
U-Boot built for SD card boot or eMMC boot.
File Name
 Description
imx8qm-var-som-symphony-dp.dtb DTB file for VAR-SOM-MX8 with DP display on Symphony Board
imx8qm-var-som-symphony-hdmi.dtb DTB file for VAR-SOM-MX8 with HDMI display on Symphony Board
imx8qm-var-som-symphony-lvds.dtb DTB file for VAR-SOM-MX8 with LVDS display on Symphony Board
imx8qm-var-som-symphony-dp-m4.dtb DTB file for VAR-SOM-MX8 with DP display and Cortex-M4 on Symphony Board
imx8qm-var-som-symphony-hdmi-m4.dtb DTB file for VAR-SOM-MX8 with HDMI display and Cortex-M4 on Symphony Board
imx8qm-var-som-symphony-lvds-m4.dtb DTB file for VAR-SOM-MX8 with LVDS display and Cortex-M4 on Symphony Board
imx8qm-var-spear-sp8customboard-dp.dtb DTB file for SPEAR-MX8 with DP display on SP8CustomBoard
imx8qm-var-spear-sp8customboard-hdmi.dtb DTB file for SPEAR-MX8 with HDMI display on SP8CustomBoard
imx8qm-var-spear-sp8customboard-lvds.dtb DTB file for SPEAR-MX8 with LVDS display on SP8CustomBoard
imx8qm-var-spear-sp8customboard-dp-m4.dtb DTB file for SPEAR-MX8 with DP display and Cortex-M4 on SP8CustomBoard
imx8qm-var-spear-sp8customboard-hdmi-m4.dtb DTB file for SPEAR-MX8 with HDMI display and Cortex-M4 on SP8CustomBoard
imx8qm-var-spear-sp8customboard-lvds.m4.dtb DTB file for SPEAR-MX8 with LVDS display and Cortex-M4 on SP8CustomBoard

Similar device trees starting with "imx8qp-" are also generated, for SOMs with the i.MX8QP variant of the SoC.


Device tree

Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-som-hdmi.dtb

Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-spear-db.dtb

Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-spear-hdmi.dtb

Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-spear-lvds.dtb

Replace imx8qm with imx8qp to build the device trees for the i.MX8QP variant of the SoC.


Device tree v2

Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/imx8qm-var-som-db.dtb

Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/imx8qm-var-som-hdmi.dtb

Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/imx8qm-var-som-db.dtb

Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/imx8qm-var-spear-db.dtb

Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/imx8qm-var-spear-hdmi.dtb

Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/imx8qm-var-spear-lvds.dtb

Replace imx8qm with imx8qp to build the device trees for the i.MX8QP variant of the SoC.


Device tree v3

Build device tree for VAR-SOM-MX8 with DP display on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-dp.dtb

Build device tree for VAR-SOM-MX8 with HDMI display on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-hdmi.dtb

Build device tree for VAR-SOM-MX8 with LVDS display on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-lvds.dtb

Build device tree for VAR-SOM-MX8 with DP display and Cortex-M4 on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-dp-m4.dtb

Build device tree for VAR-SOM-MX8 with HDMI display and Cortex-M4 on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-hdmi-m4.dtb

Build device tree for VAR-SOM-MX8 with LVDS display and Cortex-M4 on Symphony Board:
$ make -j4 freescale/imx8qm-var-som-symphony-lvds-m4.dtb

Build device tree for SPEAR-MX8 with DP display on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-dp.dtb

Build device tree for SPEAR-MX8 with HDMI display on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-hdmi.dtb

Build device tree for SPEAR-MX8 with LVDS display on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-lvds.dtb

Build device tree for SPEAR-MX8 with DP display and Cortex-M4 on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-dp-m4.dtb

Build device tree for SPEAR-MX8 with HDMI display and Cortex-M4 on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-hdmi-m4.dtb

Build device tree for SPEAR-MX8 with LVDS display and Cortex-M4on SP8CustomBoard:
$ make -j4 freescale/imx8qm-var-spear-sp8customboard-lvds-m4.dtb

Replace imx8qm with imx8qp to build the device trees for the i.MX8QP variant of the SoC.


SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz


DTB files table

DTB File Name
 Description
fsl-imx8qm-var-som-dp.dtb Device tree blob for VAR-SOM-MX8 with DP display
fsl-imx8qm-var-som-hdmi.dtb Device tree blob for VAR-SOM-MX8 with HDMI display
fsl-imx8qm-var-som-lvds.dtb Device tree blob for VAR-SOM-MX8 with LVDS display
fsl-imx8qm-var-spear-dp.dtb Device tree blob for SPEAR-MX8 with DP display
fsl-imx8qm-var-spear-hdmi.dtb Device tree blob for SPEAR-MX8 with HDMI display
fsl-imx8qm-var-spear-lvds.dtb Device tree blob for SPEAR-MX8 with LVDS display


DTB files table v2

DTB File Name
 Description
imx8qm-var-som-dp.dtb Device tree blob for VAR-SOM-MX8 with DP display
imx8qm-var-som-hdmi.dtb Device tree blob for VAR-SOM-MX8 with HDMI display
imx8qm-var-som-lvds.dtb Device tree blob for VAR-SOM-MX8 with LVDS display
imx8qm-var-spear-dp.dtb Device tree blob for SPEAR-MX8 with DP display
imx8qm-var-spear-hdmi.dtb Device tree blob for SPEAR-MX8 with HDMI display
imx8qm-var-spear-lvds.dtb Device tree blob for SPEAR-MX8 with LVDS display


Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board. 

SW3 on VAR-SOM-MX8, SW6 on SPEAR-MX8
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)


Release Notes


Based on release Yocto: Poky , BSP: NXP, Linux: [ ]
Release tag [/tree/ ]
Release manifest [/blob// ]
Date
Supported platforms
SOM revision
File System build system Yocto
Recovery SD card link [/ ]

Relevant git Repositories

Source Repository Branch Commit ID






Configuring RS485 Half-Duplex

Each UART can be configured for RS485 Half-Duplex mode by using a GPIO pin to drive the receive and transmit enable inputs. This can be configured in the device tree by making the following changes to the uart node and replacing X, Y & Z with the proper values: 

&uartX {                                                          /* Add RS485 properties to uartX */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uartX>, <&pinctrl_uartX_rs485>;     /* Add RS485 GPIO pinctrl */
	rts-gpios = <&gpioY Z GPIO_ACTIVE_LOW>;                   /* Add rts-gpios property */
	linux,rs485-enabled-at-boot-time;                         /* Enable RS485 at boot time to skip using TIOCSRS485 ioctl */
	status = "okay";
};

Next, configure the RS485 GPIO pin by adding pinctrl_uartX_rs485 to iomuxc. Replace X, GPIO_PIN_FUNCTION, and GPIO_PIN_SETTINGS with the proper values: 

&iomuxc {
	pinctrl_uartX_rs485: uartXrs485 {
		fsl,pins = <
			GPIO_PIN_FUNCTION  GPIO_PIN_SETTINGS
		>;
	};
};

Note: For more information about configuring pins, please see i.MX Device Tree Pinmux Settings Guide


After making these changes, RS485 mode will be enabled by default and can be verified from the console by running the commands below. Replace N with the proper value, which is typically X-1 relative to the device tree node uartX: 

# stty -F /dev/ttymxcN -echo -onlcr 115200
# echo hello > /dev/ttymxcN

The below logic analyzer capture shows the RS485 RX/TX enable line toggling when writing to the UART:

Rs485.png


Please refer to the Linux device tree bindings for more RS485 configuration options. 


 Expression error: Unexpected > operator. Expression error: Unexpected >= operator. Expression error: Unexpected >= operator.  
$ cd 
$ MACHINE= DISTRO=



Platform Customizations

VAR-SOM-MX6

Common Variables

Common Before


Common After


Releases

mx6-yocto-kirkstone-5.15.71_2.2.0-v1.0


dunfell-fslc-5.4-2.1.x-mx6-v1.1


dunfell-fslc-5.4-2.1.x-mx6-v1.0


thud-fslc-4.14.78-mx6-v1.0


sumo-fslc-4.9.88-mx6-v1.2


sumo-fslc-4.9.88-mx6-v1.1


sumo-fslc-4.9.88-mx6-v1.0


rocko-fslc-4.9.11-mx6-v1.2


rocko-fslc-4.9.11-mx6-v1.1


rocko-fslc-4.9.11-mx6-v1.0


rocko-fslc-4.9.11-mx6-v1.0-beta


pyro-fslc-4.1.15-mx6-v1.0


pyro-fslc-4.1.15-mx6-v1.0-beta


morty-fslc-4.1.15-mx6-v1.1


morty-fslc-4.1.15-mx6-v1.0


Release Notes


RN_mx6-yocto-kirkstone-5.15.71_2.2.0-v1.0

|- | Release 1.0 || |- | Initial Yocto Kirkstone release || Based on FSLC Yocto Kirkstone and NXP Linux Kernel 5.15.71_2.2.0 |-



DART-6UL

morty-fslc-4.1.15-mx6ul-v1.0

pyro-fslc-4.1.15-mx6ul-v1.0

pyro-fslc-4.1.15-mx6ul-v1.1

pyro-fslc-4.1.15-mx6ul-v1.2

rocko-fslc-4.9.11-mx6ul-v1.0

rocko-fslc-4.9.11-mx6ul-v1.1

sumo-fslc-4.9.88-mx6ul-v1.0

sumo-fslc-4.9.88-mx6ul-v1.1

thud-fslc-4.14.78-mx6ul-v1.0

thud-fslc-4.14.78-mx6ul-v1.1

zeus-fsl-5.4.3-mx6ul-v1.0

zeus-fsl-5.4.3-mx6ul-v1.1

zeus-fsl-5.4.3-mx6ul-v1.2

dunfell-fslc-5.4-2.1.x-mx6ul-v1.0

dunfell-fslc-5.4-2.1.x-mx6ul-v1.1

mx6ul-yocto-hardknott-5.10.72_2.2.1-v1.0

mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.0

mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.1

mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.2

mx6ul-yocto-kirkstone-5.15.71_2.2.0-v1.3

VAR-SOM-MX7

morty-fslc-4.1.15-mx7-v1.0

morty-fslc-4.1.15-mx7-v1.1

morty-fslc-4.1.15-mx7-v1.2

pyro-fslc-4.1.15-mx7-v1.0

rocko-fslc-4.9.11-mx7-v1.0

rocko-fslc-4.9.11-mx7-v1.1

rocko-fslc-4.9.11-mx7-v1.2

sumo-fslc-4.9.88-mx7-v1.0

sumo-fslc-4.9.88-mx7-v1.1

thud-fslc-4.14.78-mx7-v1.0

thud-fslc-4.14.78-mx7-v1.1

dunfell-fslc-5.4-2.1.x-mx7-v1.0

dunfell-fslc-5.4-2.1.x-mx7-v1.1

dunfell-fslc-5.4-2.1.x-mx7-v1.2

dunfell-fslc-5.4-2.1.x-mx7-v1.3

dunfell-fslc-5.4-2.1.x-mx7-v1.4

mx7-yocto-hardknott-5.10.72_2.2.3-v1.0

mx7-yocto-kirkstone-5.15.71_2.2.0-v1.0

DART-MX8M

Common Variables

Common Before

Common After

Releases

morty-fsl-4.9.51-mx8m-v1.3

morty-fsl-4.9.51-mx8m-v1.4

sumo-fsl-4.14.78-mx8m-v1.0

sumo-fsl-4.14.78-mx8m-v1.1

sumo-fsl-4.14.78-mx8m-v1.2

sumo-fsl-4.14.78-mx8m-v1.3

sumo-fsl-4.14.98-mx8m-v2.0

sumo-fsl-4.14.98-mx8m-v2.1

sumo-fsl-4.14.98-mx8m-v2.2

warrior-fsl-4.19.35-mx8m-v1.0

warrior-fsl-4.19.35-mx8m-v1.1

zeus-fsl-5.4.24-mx8mq-v1.0

zeus-fsl-5.4.24-mx8mq-v1.1

dunfell-fslc-5.4-2.1.x-mx8mq-v1.0

dunfell-fslc-5.4-2.1.x-mx8mq-v1.1

dunfell-fslc-5.4-2.1.x-mx8mq-v1.2

dunfell-fslc-5.4-2.1.x-mx8mq-v1.3

dunfell-fslc-5.4-2.1.x-mx8mq-v1.4

dunfell-fslc-5.4-2.1.x-mx8mq-v1.5

mx8m-yocto-dunfell-5.4-2.1.x-v1.6

mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0

mx8m-yocto-kirkstone-5.15-2.0.x-v1.0

mx8m-yocto-kirkstone-5.15-2.0.x-v1.1

mx8m-yocto-kirkstone-5.15-2.0.x-v1.2

mx8m-yocto-kirkstone-5.15-2.0.x-v1.3

mx8m-yocto-kirkstone-5.15-2.0.x-v1.4

mx8m-yocto-kirkstone-5.15-2.0.x-v1.5

mx8m-yocto-mickledore-6.1.36_2.1.0-v1.0

DART-MX8M-MINI

Common Variables

Common Before

Common After

Releases

sumo-fsl-4.14.78-mx8mm-v1.1

sumo-fsl-4.14.78-mx8mm-v1.3

sumo-fsl-4.14.78-mx8mm-v1.4

sumo-fsl-4.14.78-mx8mm-v1.5

sumo-fsl-4.14.78-mx8mm-v1.6

sumo-fsl-4.14.98-mx8mm-v2.0

sumo-fsl-4.14.98-mx8mm-v2.1

sumo-fsl-4.14.98-mx8mm-v2.2

sumo-fsl-4.14.98-mx8mm-v2.4

sumo-fsl-4.14.98-mx8mm-v2.5

warrior-fsl-4.19.35-mx8mm-v1.0

warrior-fsl-4.19.35-mx8mm-v1.1

zeus-fsl-5.4.3-mx8mm-v1.0

zeus-fsl-5.4.3-mx8mm-v1.1

dunfell-fslc-5.4-2.1.x-mx8mm-v1.0

dunfell-fslc-5.4-2.1.x-mx8mm-v1.1

dunfell-fslc-5.4-2.1.x-mx8mm-v1.2

dunfell-fslc-5.4-2.1.x-mx8mm-v1.3

dunfell-fslc-5.4-2.1.x-mx8mm-v1.4

dunfell-fslc-5.4-2.1.x-mx8mm-v1.5

dunfell-fslc-5.4-2.1.x-mx8mm-v1.6

dunfell-fslc-5.4-2.1.x-mx8mm-v1.7

hardknott-fslc-5.4-2.3.x-mx8mm-v1.0

hardknott-fslc-5.4-2.3.x-mx8mm-v1.1

hardknott-fslc-5.4-2.3.x-mx8mm-v1.2

hardknott-fslc-5.4-2.3.x-mx8mm-v1.3

hardknott-fslc-5.4-2.3.x-mx8mm-v1.4

mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0

mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1

mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2

mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0

mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1

mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2

mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3

mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0

mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0

mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1

mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2






VAR-SOM-MX8M-NANO

Common Variables

Common Before

Common After

sumo-fsl-4.14.98-mx8mn-v1.0

sumo-fsl-4.14.98-mx8mn-v1.1

sumo-fsl-4.14.98-mx8mn-v1.2

sumo-fsl-4.14.98-mx8mn-v1.3

zeus-fsl-5.4.3-mx8mn-v1.0

zeus-fsl-5.4.3-mx8mn-v1.1

zeus-fsl-5.4.24-mx8mn-v2.0

zeus-fsl-5.4.24-mx8mn-v2.1

dunfell-fslc-5.4-2.1.x-mx8mn-v1.0

dunfell-fslc-5.4-2.1.x-mx8mn-v1.1

dunfell-fslc-5.4-2.1.x-mx8mn-v1.2

dunfell-fslc-5.4-2.1.x-mx8mn-v1.3

dunfell-fslc-5.4-2.1.x-mx8mn-v1.4

dunfell-fslc-5.4-2.1.x-mx8mn-v1.5

dunfell-fslc-5.4-2.1.x-mx8mn-v1.6

dunfell-fslc-5.4-2.1.x-mx8mn-v1.7

dunfell-fslc-5.4-2.1.x-mx8mn-v1.8

mx8mn-yocto-hardknott-5.10.72_2.2.1-v1.0

mx8mn-yocto-kirkstone-5.15-2.0.x-v1.0

mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.0

mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.1

mx8mn-yocto-kirkstone-5.15.71_2.2.0-v1.2

mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.0

mx8mn-yocto-mickledore-6.1.22_2.0.0-v1.1

mx8mn-yocto-mickledore-6.1.36_2.1.0-v1.0

DART-MX8M-PLUS

Common Variables

Common Before

Common After

Releases

zeus-fsl-5.4.47-mx8mp-v1.0

zeus-fsl-5.4.70-mx8mp-v1.0

zeus-fsl-5.4.70-mx8mp-v1.1

zeus-fsl-5.4.70-mx8mp-v1.2

zeus-fsl-5.4.70_2.3.2-mx8mp-v1.0

zeus-fsl-5.4.70_2.3.2-mx8mp-v1.1

gatesgarth-fsl-5.10.9_1.0.0-mx8mp-v1.0

hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.0

hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.1

hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.2

hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.0

hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.1

hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.2

hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.3

mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0

mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1

mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0

mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1

mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2

mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0

mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1

mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2

mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0

mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1

mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0

mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1

mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2

mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3

Release Notes

VAR-SOM-MX8X

Common Variables

Common Before

Common After

sumo-fsl-4.14.98-mx8x-v1.0

sumo-fsl-4.14.98-mx8x-v1.1

sumo-fsl-4.14.98-mx8x-v1.2

sumo-fsl-4.14.98-mx8x-v1.3

sumo-fsl-4.14.98-mx8x-v1.5

sumo-fsl-4.14.98-mx8x-v2.0

sumo-fsl-4.14.98-mx8x-v2.3

sumo-fsl-4.14.98-mx8x-v2.4

dunfell-fslc-5.4-2.1.x-mx8x-v1.0

dunfell-fslc-5.4-2.1.x-mx8x-v1.1

dunfell-fslc-5.4-2.1.x-mx8x-v1.2

dunfell-fslc-5.4-2.1.x-mx8x-v1.3

mx8x-yocto-hardknott-5.10.72_2.2.1-v1.0

mx8x-yocto-hardknott-5.10.72_2.2.1-v1.1

mx8x-yocto-kirkstone-5.15-2.0.x-v1.0

mx8x-yocto-kirkstone-5.15-2.0.x-v1.1

mx8x-yocto-kirkstone-5.15-2.0.x-v1.2

mx8x-yocto-mickledore-6.1.22_2.0.0-v1.0

mx8x-yocto-mickledore-6.1.22_2.0.0-v1.1

mx8x-yocto-mickledore-6.1.36_2.1.0-v1.0

mx8x-yocto-mickledore-6.1.36_2.1.0-v1.1

mx8x-yocto-mickledore-6.1.36_2.1.0-v1.2

mx8x-yocto-mickledore-6.1.36_2.1.0-v1.3

VAR-SOM-MX8

Common Variables

Common Before

Common After

sumo-fsl-4.14.98-mx8-v1.1

sumo-fsl-4.14.98-mx8-v1.2

sumo-fsl-4.14.98-mx8-v1.3

sumo-fsl-4.14.98-mx8-v1.4

sumo-fsl-4.14.98-mx8-v1.5

sumo-fsl-4.14.98-mx8-v1.6

sumo-fsl-4.14.98-mx8-v1.7

sumo-fsl-4.14.98-mx8-v1.8

sumo-fsl-4.14.98-mx8-v1.9

zeus-fsl-5.4.3-mx8-v1.0

zeus-fsl-5.4.3-mx8-v1.1

zeus-fsl-5.4.3-mx8-v1.2

dunfell-fslc-5.4-2.1.x-mx8-v1.0

dunfell-fslc-5.4-2.1.x-mx8-v1.1

dunfell-fslc-5.4-2.1.x-mx8-v1.2

dunfell-fslc-5.4-2.1.x-mx8-v1.3

dunfell-fslc-5.4-2.1.x-mx8-v1.4

dunfell-fslc-5.4-2.1.x-mx8-v1.5

mx8-yocto-hardknott-5.10.72_2.2.1-v1.0

mx8-yocto-hardknott-5.10.72_2.2.1-v1.1

mx8-yocto-kirkstone-5.15-2.0.x-v1.0

mx8-yocto-kirkstone-5.15-2.0.x-v1.1

mx8-yocto-kirkstone-5.15-2.0.x-v1.2

mx8-yocto-mickledore-6.1.22_2.0.0-v1.0

mx8-yocto-mickledore-6.1.36_2.1.0-v1.0

VAR-SOM-MX93

Common Variables

Common Before

Common After

Releases

mx93-yocto-kirkstone-5.15.71_2.2.0-v1.0

mx93-yocto-kirkstone-5.15.71_2.2.0-v1.1

mx93-yocto-kirkstone-5.15.71_2.2.0-v1.2

mx93-yocto-langdale-6.1.1_1.0.1-v1.0

mx93-yocto-langdale-6.1.1_1.0.1-v1.1

mx93-yocto-langdale-6.1.1_1.0.1-v1.2

mx93-yocto-langdale-6.1.1_1.0.1-v1.3

mx93-yocto-mickledore-6.1.22_2.0.0-v1.0

mx93-yocto-mickledore-6.1.36_2.1.0-v1.0

mx93-yocto-mickledore-6.1.36_2.1.0-v1.1

mx93-yocto-mickledore-6.1.36_2.1.0-v1.2

mx93-yocto-mickledore-6.1.36_2.1.0-v1.3

mx93-yocto-mickledore-6.1.36_2.1.0-v2.0

mx93-yocto-mickledore-6.1.36_2.1.0-v2.1

mx93-yocto-mickledore-6.1.36_2.1.0-v2.2

mx93-yocto-mickledore-6.1.36_2.1.0-v2.3

VAR-SOM-AM62












VAR-SOM-AM33


DART-MX95

Common Variables

Common Before

Common After

Releases

mx95-yocto-nanbield-6.6.3_1.0.0-v1.0

mx95-yocto-scarthgap-6.6.23_2.0.0-v1.0

Retrieved from "https://variwiki.com/index.php?title=Yocto_Platform_Customization&oldid=27366"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 30 October 2024, at 20:08.

© 2024 Variscite. All rights reserved