Yocto Platform Customization: Difference between revisions

Revision as of 12:46, 4 May 2017

Release morty-fslc-4.1.15-mx6ul-v1.0-beta

RELEASE_NAME=morty-fslc-4.1.15-mx6ul-v1.0-beta
RECOVERY_SD_NAME=morty-fslc-4.1.15-mx6ul-v1.0-beta.img.gz
RECOVERY_SD_URL=ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/fslc
KERNEL_DEFCONFIG=imx6ul-var-dart_defconfig
KERNEL_BRANCH=imx-rel_imx_4.1.15_2.0.0_ga-var01
KERNEL_IMAGE=zImage 
U-BOOT_BRANCH=imx_v2015.10_dart_6ul_var1
U-BOOT_SD_DEFCONFIG=mx6ul_var_dart_mmc_defconfig
U-BOOT_NAND_DEFCONFIG=mx6ul_var_dart_nand_defconfig

Yocto Morty

TOOLCHAIN_X11_INSTALL_NAME='
TOOLCHAIN_LOCATION=/opt/fsl-imx-x11/4.1.15-2.0.1/environment-setup-cortexa7hf-neon-poky-linux-gnueabi
BUILD_FOLDER=~/var-fslc-yocto
BUILD_DISTRO=fslc-x11
BUILD_SCRIPT=. setup-environment
BUILD_FOLDER_X11=build_x11

Platform DART-6UL

MACHINE_NAME=imx6ul-var-dart
HARDWARE_NAME=DART-6ULL

Device tree

Build only the device tree for DART-6UL with eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6ULL with eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6ULL with eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6ULL with NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6ULL with NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.bz2
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

@@ Line 35: / Line 35: @@
 <onlyinclude>{{#ifeq:{{{transcludesection|RELEASE_MORTY_BETA_DART-6UL}}}|RELEASE_MORTY_BETA_DART-6UL
-{{:Yocto_Platform_Customization|transcludesection=YOCTO_MORTY}}
+{{#vardefine:YOCTO_NAME|Morty}}
-{{:Yocto_Platform_Customization|transcludesection=PLATFORM_VAR-SOM-MX6}}
+{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}
+{{#vardefine:TOOLCHAIN_LOCATION|/opt/fsl-imx-x11/4.1.15-2.0.1/environment-setup-cortexa7hf-neon-poky-linux-gnueabi}}
+{{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}
+{{#vardefine:BUILD_DISTRO|fslc-x11}}
+{{#vardefine:BUILD_SCRIPT|. setup-environment}}
+{{#vardefine:BUILD_FOLDER_X11|build_x11}}
+{{#vardefine:MACHINE_NAME|imx6ul-var-dart}}
+{{#vardefine:HARDWARE_NAME|DART-6ULL}}
 {{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var01}}
 {{#vardefine:KERNEL_IMAGE|zImage}}
@@ Line 50: / Line 57: @@
 ==Release  morty-fslc-4.1.15-mx6ul-v1.0-beta ==
+{{:Yocto_Platform_Customization|transcludesection=RELEASE_MORTY_BETA_DART-6UL}}
   RELEASE_NAME='''{{#var:RELEASE_NAME}}'''
   RECOVERY_SD_NAME='''{{#var:RECOVERY_SD_NAME}}'''