Yocto Platform Customization: Difference between revisions

Revision as of 12:47, 3 May 2017

Yocto Morty

TOOLCHAIN_X11_INSTALL_NAME='
TOOLCHAIN_LOCATION=/opt/fsl-imx-x11/4.1.15-2.0.1/environment-setup-cortexa7hf-neon-poky-linux-gnueabi
BUILD_FOLDER=~/var-fslc-yocto
BUILD_DISTRO=fslc-x11
BUILD_SCRIPT=. setup-environment
BUILD_FOLDER_X11=build_x11
KERNEL_BRANCH=imx-rel_imx_4.1.15_2.0.0_ga-var01

Platform DART-6UL

MACHINE_NAME=imx6ul-var-dart
HARDWARE_NAME=DART-6UL
MACHINE_KERNEL_DEFCONFIG='
KERNEL_IMAGE=zImage

Device tree

Build only the device tree for DART-6UL with eMMC and WiFi: $ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with eMMC and SD card: $ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with NAND flash and WiFi: $ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with NAND flash and SD card: $ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6ULL with eMMC and WiFi: $ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6ULL with eMMC and SD card: $ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6ULL with NAND flash and WiFi: $ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6ULL with NAND flash and SD card: $ make -j4 imx6ull-var-dart-sd_nand.dtb

@@ Line 1: / Line 1: @@
 <onlyinclude>{{#ifeq:{{{transcludesection|YOCTO_MORTY}}}|YOCTO_MORTY|
-{{#vardefine:TOOLCHAIN_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}
+{{#vardefine:TOOLCHAIN_INSTALL_X11_NAME|fslc-x11-glibc-x86_64-meta-toolchain-armv7at2hf-neon-toolchain-2.2.1.sh}}
 {{#vardefine:TOOLCHAIN_LOCATION|/opt/fsl-imx-x11/4.1.15-2.0.1/environment-setup-cortexa7hf-neon-poky-linux-gnueabi}}
 {{#vardefine:BUILD_FOLDER|~/var-fslc-yocto}}
@@ Line 7: / Line 7: @@
 {{#vardefine:BUILD_FOLDER_X11|build_x11}}
 {{#vardefine:KERNEL_BRANCH|imx-rel_imx_4.1.15_2.0.0_ga-var01}}
+{{#vardefine:KERNEL_IMAGE|zImage}}
 }}</onlyinclude>
@@ Line 17: / Line 18: @@
 ==Yocto Morty==
-  TOOLCHAIN_NAME='''{{#var:TOOLCHAIN_NAME}}'''
+  TOOLCHAIN_X11_INSTALL_NAME='''{{#var:TOOLCHAIN_X11_INSTALL_NAME}}'''
   TOOLCHAIN_LOCATION='''{{#var:TOOLCHAIN_LOCATION}}'''
   BUILD_FOLDER='''{{#var:BUILD_FOLDER}}'''
@@ Line 29: / Line 30: @@
   HARDWARE_NAME='''{{#var:HARDWARE_NAME}}'''
   MACHINE_KERNEL_DEFCONFIG='''{{#var:MACHINE_KERNEL_DEFCONFIG}}'''
+ KERNEL_IMAGE='''{{#var:KERNEL_IMAGE}}'''
+=== Device tree ===
+<onlyinclude>{{#ifeq:{{{transcludesection|DART-6UL_DTB}}}|DART-6UL_DTB|
+Build only the device tree for DART-6UL with eMMC and WiFi:
+$ make -j4 imx6ul-var-dart-emmc_wifi.dtb
+Build only the device tree for DART-6UL with eMMC and SD card:
+$ make -j4 imx6ul-var-dart-sd_emmc.dtb
+Build only the device tree for DART-6UL with NAND flash and WiFi:
+$ make -j4 imx6ul-var-dart-nand_wifi.dtb
+Build only the device tree for DART-6UL with NAND flash and SD card:
+$ make -j4 imx6ul-var-dart-sd_nand.dtb
+Build only the device tree for DART-6ULL with eMMC and WiFi:
+$ make -j4 imx6ull-var-dart-emmc_wifi.dtb
+Build only the device tree for DART-6ULL with eMMC and SD card:
+$ make -j4 imx6ull-var-dart-sd_emmc.dtb
+Build only the device tree for DART-6ULL with NAND flash and WiFi:
+$ make -j4 imx6ull-var-dart-nand_wifi.dtb
+Build only the device tree for DART-6ULL with NAND flash and SD card:
+$ make -j4 imx6ull-var-dart-sd_nand.dtb
+}}</onlyinclude>