DART-6UL Yocto Flash From Net: Difference between revisions
From Variscite Wiki
| (6 intermediate revisions by 3 users not shown) | |||
| Line 10: | Line 10: | ||
|info}} | |info}} | ||
== Build mininal file system== | == Build mininal file system== | ||
<pre>$ gedit ../sources/poky/meta/recipes-core/images/core-image-minimal-mtdutils.bb | <pre> | ||
$ gedit ../sources/poky/meta/recipes-core/images/core-image-minimal-mtdutils.bb | |||
</pre> | </pre> | ||
Set the image to include: | Set the image to include: | ||
IMAGE_INSTALL += "mtd-utils imx-kobs mtd-utils-ubifs"<br> | IMAGE_INSTALL += "mtd-utils imx-kobs mtd-utils-ubifs"<br> | ||
Build the system: | Build the system: | ||
<pre>$ bitbake core-image-minimal-mtdutils | <pre> | ||
$ bitbake core-image-minimal-mtdutils | |||
</pre> | </pre> | ||
Create a root file system and copy files | Create a root file system and copy files | ||
<pre>$ mkdir ~/flash_rootfs | <pre> | ||
$ mkdir ~/flash_rootfs | |||
$ sudo tar xvf tmp/deploy/images/imx6ul-var-dart/core-image-minimal-mtdutils-imx6ul-var-dart.tar.bz2 -C ~/flash_rootfs | $ sudo tar xvf tmp/deploy/images/imx6ul-var-dart/core-image-minimal-mtdutils-imx6ul-var-dart.tar.bz2 -C ~/flash_rootfs | ||
Linux: | Linux: | ||
| Line 29: | Line 32: | ||
</pre> | </pre> | ||
Insert nand-recovery into your host and copy files | Insert nand-recovery into your host and copy files | ||
<pre>$ sudo cp -a /media/rootfs/opt/images ~/flash_rootfs/opt/ | <pre> | ||
$ sudo cp /media/rootfs/ | $ sudo cp -a /media/rootfs/opt/images ~/flash_rootfs/opt/ | ||
$ sudo cp /media/rootfs/usr/bin/*.sh ~/flash_rootfs/usr/bin/ | |||
</pre> | </pre> | ||
Boot into | Boot into U-Boot and change environment variables | ||
<pre> Select one: | <pre> | ||
Select one: | |||
$ setenv fdt_file imx6ul-var-dart-nand_wifi.dtb | $ setenv fdt_file imx6ul-var-dart-nand_wifi.dtb | ||
$ setenv fdt_file imx6ul-var-dart-emmc_wifi.dtb | $ setenv fdt_file imx6ul-var-dart-emmc_wifi.dtb | ||
$ setenv fdt_file | $ setenv fdt_file imx6ul-var-dart-sd_nand.dtb | ||
$ setenv fdt_file | $ setenv fdt_file imx6ul-var-dart-sd_emmc.dtb | ||
$ setenv serverip 192.168.1.38 | $ setenv serverip 192.168.1.38 | ||
| Line 47: | Line 52: | ||
$ setenv bootcmd 'run netboot' | $ setenv bootcmd 'run netboot' | ||
$ saveenv | $ saveenv | ||
$ boot | $ boot | ||
</pre> | </pre> | ||
[[VAR-SOM-MX6 Yocto Utilizing|TFTP & NFS detail]]<br> | |||
On the target flash your system: | On the target flash your system: | ||
<pre> | <pre> | ||
$ | $ install_yocto.sh | ||
</pre> | </pre> | ||
A complete system is flashed into the SOMs internal storage (NAND flash/eMMC).<br> | |||
Once the file system is built you can use it again and again to flash your DART-6UL.<br> | |||
You can update the images to use your own images or customize the install_yocto.sh script to your requirements. | |||
Latest revision as of 22:51, 17 November 2016
Flash From Network Yocto system
Flashing a complete Yocto system from Network using tftp & nfs
NOTES:
- Please make sure your host system is ready to use TFTP/NFS. Use our WIKI if required. TFTP & NFS
- Mix and match the nand-recovery version with the system you would like to flash.
- This is a concept WIKI. Please adopt it to your system and your requirements.
- Android can be flashed in the same way.
Build mininal file system
$ gedit ../sources/poky/meta/recipes-core/images/core-image-minimal-mtdutils.bb
Set the image to include:
IMAGE_INSTALL += "mtd-utils imx-kobs mtd-utils-ubifs"
Build the system:
$ bitbake core-image-minimal-mtdutils
Create a root file system and copy files
$ mkdir ~/flash_rootfs $ sudo tar xvf tmp/deploy/images/imx6ul-var-dart/core-image-minimal-mtdutils-imx6ul-var-dart.tar.bz2 -C ~/flash_rootfs Linux: $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage /tftpboot Device Tree: $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-emmc_wifi.dtb /tftpboot/imx6ul-var-dart-emmc_wifi.dtb $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-nand_wifi.dtb /tftpboot/imx6ul-var-dart-nand_wifi.dtb $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-sd_emmc.dtb /tftpboot/imx6ul-var-dart-sd_emmc.dtb $ sudo cp tmp/deploy/images/imx6ul-var-dart/zImage-imx6ul-var-dart-sd_nand.dtb /tftpboot/imx6ul-var-dart-sd_nand.dtb
Insert nand-recovery into your host and copy files
$ sudo cp -a /media/rootfs/opt/images ~/flash_rootfs/opt/ $ sudo cp /media/rootfs/usr/bin/*.sh ~/flash_rootfs/usr/bin/
Boot into U-Boot and change environment variables
Select one: $ setenv fdt_file imx6ul-var-dart-nand_wifi.dtb $ setenv fdt_file imx6ul-var-dart-emmc_wifi.dtb $ setenv fdt_file imx6ul-var-dart-sd_nand.dtb $ setenv fdt_file imx6ul-var-dart-sd_emmc.dtb $ setenv serverip 192.168.1.38 $ setenv image zImage $ setenv nfsroot /home/<your username>/flash_rootfs $ setenv console ttymxc0 $ setenv bootcmd 'run netboot' $ saveenv $ boot
TFTP & NFS detail
On the target flash your system:
$ install_yocto.sh
A complete system is flashed into the SOMs internal storage (NAND flash/eMMC).
Once the file system is built you can use it again and again to flash your DART-6UL.
You can update the images to use your own images or customize the install_yocto.sh script to your requirements.