DART-6UL Yocto NAND Recovery

Variscite provides a recovery SD card image that can be used to install the pre-built U-Boot, Linux kernel and the file system into the internal storage of the SOM.

Preparing a recovery SD card

• Download mx6ul-dart-recovery-sd.vXX.img.gz (latest) which is available on Variscite's FTP: ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software
• Plug-in the SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)

$ gunzip mx6ul-dart-recovery-sd.vXX.img.gz
$ sudo umount /dev/sdX*
$ sudo dd if=mx6ul-dart-recovery-sd.vXX.img of=/dev/sdX bs=1M

(Replace /dev/sdX with your actual device)

Recover NAND flash/eMMC

• Power-off the board.
• Insert the SD card into the SD card slot of the carrier board (DVK)
• Make sure the Boot DIP switches are set to SD card: Setting the Boot DIP switches
• Power up the board - it will boot into Linux from the SD card

Flash from GUI

Touch/Click on the appropriate icon:

• Install Yocto NAND, WiFi: Flash Yocto with WiFi support to NAND flash
• Install Yocto NAND, SD card: Flash Yocto with SD card support to NAND flash
• Install Yocto eMMC (SD/WiFi) : Flash Yocto to eMMC (installs both SD card and WiFi dtbs to the BOOT partition and let U-Boot select between them at boot time)

Flash from command line

• Login as root (no password)
• From Linux command line, type one of flash options

$ install_yocto.sh	- Flash Yocto into eMMC or NAND Flash (Follow instructions)

SD card image file tree

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── rootfs.tar.bz2
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

The install_yocto.sh script file is located at /usr/bin/