DART-6UL

DART-6UL

Supporting the i.MX-6UL, the DART-6UL allows designers to use a single System on Module in a broad range of applications to achieve short time-to-market for their current innovations, while still accommodating potential R&D directions and marketing opportunities. This versatile solution’s -35 to 85 °C temperature range and Dual CAN support is ideal for industrial applications.

Yocto

Jethro Release 01 - 4.1.15

• Complete Developers Guide

Fido Release 02 - 3.14.52

• Complete Developers Guide

Legacy releases

• Legacy

Development

• Support forum
• NAND recovery

Debian

Debian Jessie R01- 3.14.52

• Complete Developers Guide

Android

Brillo M10 Rev 01 - 3.14.52

• Complete Developers Guide

Specs summary

CPU	Freescale i.MX6-6UL, Cortex™-A7 528MHz
Memory	128MB - 528MB DDR3
GPU	2D Pixel acceleration engine
Display	Parallel 24-bit display interface – up to 1366 x 768
Storage	SD-Card, up to 512MB SLC NAND, eMMC up to 64GB
Network	WiLink8 802.11 a/b/g/n + MIMO, Ethernet: 2x 10/100 Mbps
RTC	On carrier
I2C	x4
One-Wire	N/A
SPI	x4
CAN bus	{{{can}}}
UARTs	x8, up to 3.6 Mbps
USB	USB 2.0 : 1x Host, 1x OTG
Audio	Headphone, S/PDIF, Line In/Out
Temperature Range	-35 to 85°C
Dimensions	25x50x4 (mm)

To the top

Latest News

1/5/2016 - Variscite releases Brillo M10 Rel 01

1/11/2015 - Variscite releases Yocto R10 Fido beta

New Fido Beta R10 - 3.14.38 based on Freescale release.