Revision as of 08:44, 19 April 2016

Download packages and build.

Create directory tree

Create the following directory tree:

$ mkdir ~/sd410
$ cd ~/sd410

Download the whole Ubuntu folder located in /dart-sd410/Software/ on Variscite FTP This will create the following directory tree

sd410
└── ubuntu
    ├── kernel
    └── ramdisk

NOTE:
Please refer to support@variscite.com for obtaining FTP credentials.

Download kernel source from git repository

$ git clone https://github.com/varigit/DART-SD410-kernel.git kernel
$ git checkout -b release/qcomlt-4.2

Build kernel source using supplied script file:

$ ./makebootimg.sh

The kernel sources will be built and the output boot image file will be created in the ~/sd410/ubuntu/Linaro4.2/ directory

Cycle power of the VAR-SD410CustomBoard with Back button pressed. it will enter fastboot. run the following commend to update the boot image:

$ sudo fastboot flash boot boot-sd410.img
$ sudo fastboot reboot

The board will update the system and reboot with the updated kernel

@@ Line 30: / Line 30: @@
 Build kernel source using supplied script file:
 <pre>
-$ ./makebootimg./sh
+$ ./makebootimg.sh
 </pre>
 The kernel sources will be built and the output boot image file will be created in the ~/sd410/ubuntu/Linaro4.2/ directory
 = Flash new image to the board =
 Cycle power of the VAR-SD410CustomBoard with Back button pressed. it will enter fastboot.