DART-SD410 Start here: Difference between revisions
From Variscite Wiki
(Created page with "{{PageHeader|DART-SD410 - First Time? Start Here.}} {{DocImage|category1=DART-SD410|category2=Android}}__toc__ = Step One: Read Documentations = Please download and read the d...") |
|||
| Line 17: | Line 17: | ||
= Step Four: What next?= | = Step Four: What next?= | ||
Your next step can be one of : | Your next step can be one of : | ||
* [[ | * [[DART-SD410_Android_Host_Install|Setup build environment]]. This guide will help you to install the needed drivers on the host PC. | ||
* [[DART-SD410_Android_LL_1_1|Developers Guide</span>]]. This guide will help you to build the Android project and create the working images. | |||
Revision as of 12:57, 17 April 2016
DART-SD410 - First Time? Start Here.
Step One: Read Documentations
Please download and read the development kit documentation. on Variscite website
NOTE:
Make sure you read the Quick Start Guide.
Make sure you read the Quick Start Guide.
Step Two: Setup Linux host PC Development Environment
Set up your development environment.
Step Three: DVK Power Up
Remove SD card from the Board.
Power up the board.
You should have the serial cable connected to the debug port, as describe in the quick start guide
When board boots, make sure you see the boot process prints on your host PC hyper terminal. You will need to type-in commands in the command prompt late in the development stages
IMPORTANT:
Don't continue without the serial console operating.
Don't continue without the serial console operating.
Step Four: What next?
Your next step can be one of :
- Setup build environment. This guide will help you to install the needed drivers on the host PC.
- Developers Guide. This guide will help you to build the Android project and create the working images.
- Test various interfaces.
- Contact Support
- Support forum
- support@variscite.com