VAR-SOM-MX6 Ubuntu Flash From Net

VAR-SOM-MX6 - Ubuntu Linaro Alip-20151215 Flash your target from NET

Note:
Under construction!!! Under construction!!! Under construction!!!

Overview

Ubuntu Linaro Alip is pre built file system. For more information Ubuntu based Rootfs provided by Linaro. Variscite used linaro-vivid-alip-20151215-714 image added Vivante Graphic acceleration and compile the GStreamer with i.MX6 support.

Build Ubuntu Alip NFS is prerequisite step. Please make sure you run it and have a complete NFS build directory as described in the linked WIKI. Also make sure you target is booted from NFS.

The steps require to build an Bootable SDCARD:

1. Build Ubuntu Alip NFS. Build Ubuntu Alip NFS
2. Boot your Ubuntu Alip with TFTP and mount your file system over NFS. Build Ubuntu Alip NFS
3. Copy required file to your NFS directory
4. Format and partition the target eMMC
5. Install U-Boot and Linux Kernel images
6. Install the root file system
7. Deploy the kernel modules
8. Deploy the Wi-Fi modules and firmware

Copy required file to your NFS directory

Note:
Make sure you built U-Boot for NAND.

$ cd  ~/var-som-mx6-alip/
$ sudo cp uboot-imx/SPL rootfs/root
$ sudo cp uboot-imx/u-boot.img rootfs/root
$ sudo cp linux-2.6-imx/arch/arm/boot/uImage rootfs/root
$ sudo cp linux-2.6-imx/arch/arm/boot/dts/*var*.dtb rootfs/root
$ sudo cp ~/baba/Downloads/
$ sudo cp ~/baba/Downloads/linaro-alip-20151215-v1.tar.bz2  rootfs/root/

Format and partition the target eMMC

Boot your target and:

$ fdisk /dev/mmcblk1                                                                                 
n
p
1
<enter for default>
<enter for default>
t
83
w
$ mkfs.ext4 /dev/mmcblk1p1 -Lrootfs

Install U-Boot and Linux Kernel images

Note:
Make sure you built U-Boot for NAND.

$ flash_erase /dev/mtd0 0 0
$ kobs-ng init -x SPL --search_exponent=1 -v > /dev/null
$ flash_erase /dev/mtd1 0 0
$ nandwrite -p /dev/mtd1 $MEDIA/$OS/$UBOOT_IMAGE
$
$ flash_erase  /dev/mtd2 0 0
$ nandwrite -p /dev/mtd2 uImage
$ nandwrite -p /dev/mtd3 -s 0x7e0000 dtb
$ sync

Install the root file system

$ sudo tar xvf ~/Downloads/linaro-alip-20151215-v1.tar.bz2 -C /media/rootfs

Deploy the kernel modules

$ cd ~/var-som-mx6-alip/linux-2.6-imx
$ sudo make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- modules_install INSTALL_MOD_PATH=/media/rootfs/

Deploy the Wi-Fi modules and firmware

$ cd ~/var-som-mx6-alip/build-utilites
$ gedit setup-env
set:
export ROOTFS=/media/rootfs

$ ./sudo_build_wl18xx.sh modules
$ ./sudo_build_wl18xx.sh firmware
$ ./sudo_build_wl18xx.sh bt-firmware
$ sudo umount /dev/sdxxx*