VAR-SOM-AM43 GBIT Ethernet: Difference between revisions
From Variscite Wiki
| Line 1: | Line 1: | ||
= On Carrier Gbit Ethernet - ETH1 = | = On Carrier Gbit Ethernet - ETH1 = | ||
This Ethenet interface is available only if the VAR-SOM-AM43 device is without WiFi.<br> | This Ethenet interface is available only if the VAR-SOM-AM43 device is without a WiFi module.<br> | ||
In Uboot an autodetect mechanism will detect the type of module | In Uboot an autodetect mechanism will detect the type of module used and select the right .dtb accordingly.<br> | ||
For a module with WiFi var-som-am43.dtb is selected, for a module without WiFi var-som-am43-eth1.dtb is selected.<br> | For a module with WiFi var-som-am43.dtb is selected, for a module without WiFi var-som-am43-eth1.dtb is selected.<br> | ||
Please follow the instructions below:<br> | Please follow the instructions below:<br> | ||
Revision as of 09:21, 24 December 2015
On Carrier Gbit Ethernet - ETH1
This Ethenet interface is available only if the VAR-SOM-AM43 device is without a WiFi module.
In Uboot an autodetect mechanism will detect the type of module used and select the right .dtb accordingly.
For a module with WiFi var-som-am43.dtb is selected, for a module without WiFi var-som-am43-eth1.dtb is selected.
Please follow the instructions below:
Activate the ETH1 device and acquire IP for testing. On Target:
$ ifconfig eth0 down $ ifconfig eth1 up $ udhcpc -i eth1 $ ifconfig $ iperf -s -u
On Host:
$ iperf -c 192.168.1.82 -u -b450M