VAR-SOM-MX6 LVDS

VAR-SOM-MX6 - LVDS

LVDS boot arguments

Resistive/Capacitive alternate screen

Variscite expand the default display settings to support alternate display without any requirement to change the device tree. During the boot sequence Variscite u-boot will add screen_alternate=yes option to enable selection of the second display settings (capacitive display).
For example:

U-Boot # printenv mmcargs
mmcargs=setenv bootargs console=${console},${baudrate} ${smp} video=mxcfb1:off root=${mmcroot} 
screen_alternate=yes

The developer can prevent the modification of u-boot by settings var_auto_fdt_file=N.

U-Boot # setenv var_auto_fdt_file=N

Switching to LVDS1 as main display

Switching to LVDS1 display requires changing the "primary" of the lvds section flag in the device tree. Setting display to be LVDS1 by default: edit arch/arm/boot/dts/imx6qdl-var-som.dtsi and set section of the lvds1. When you set the "primary" property to the LVDS1 struct, make sure you remove it from the LVDS0 struct

lvds-channel@1 {

fsl,data-mapping = "spwg";

fsl,data-width = <18>;

crtc = "ipu1-di1";

primary;

status = "okay";

display-timings {

native-mode = <&timing1>;

timing1: hsd100pxn1 {

clock-frequency = <35714000>;

hactive = <800>;

vactive = <480>;

hback-porch = <28>;

hfront-porch = <17>;

vback-porch = <13>;

vfront-porch = <20>;

hsync-len = <20>;

vsync-len = <13>;

};

};

};

Please take a look on the wiki section for kernel out of tree to see how to compile the device tree.