YPC DART-MX8M-PLUS: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
(36 intermediate revisions by 7 users not shown)
Line 124: Line 124:
-->{{#vardefine:DEFAULT_DTB_SD|imx8mp-var-dart.dtb}} <!--
-->{{#vardefine:DEFAULT_DTB_SD|imx8mp-var-dart.dtb}} <!--
-->{{#vardefine:DEFAULT_DTB|imx8mp-var-dart.dtb}} <!--  
-->{{#vardefine:DEFAULT_DTB|imx8mp-var-dart.dtb}} <!--  
-->{{#vardefine:SUPPORTED_REV_SOM|v1.0 and higher}} <!--
-->{{#vardefine:SUPPORTED_REV_SOM|v1.x}} <!--
-->{{#vardefine:SUPPORTED_REV_CARRIER|v1.4 and higher}} <!--
-->{{#vardefine:SUPPORTED_REV_CARRIER|v1.4 and higher}} <!--
-->{{#vardefine:RELEASE_DATE|10/29/2020}} <section end=RELEASE_ZEUS_V1.0_DART-MX8M-PLUS/>
-->{{#vardefine:RELEASE_DATE|10/29/2020}} <section end=RELEASE_ZEUS_V1.0_DART-MX8M-PLUS/>
Line 1,418: Line 1,418:
-->{{#vardefine:KERNEL_COMMIT|931be342d64b9908a9f60ec6afe7012981855341}} <!---
-->{{#vardefine:KERNEL_COMMIT|931be342d64b9908a9f60ec6afe7012981855341}} <!---
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_RECIPE_VER|6.1.22}} <!--
-->{{#vardefine:KERNEL_RECIPE_VER|6.1}} <!--
-->{{#vardefine:KERNEL_VER|6.1.22}} <!--
-->{{#vardefine:KERNEL_VER|6.1.22}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
Line 1,541: Line 1,541:
-->{{#vardefine:KERNEL_BRANCH|lf-6.1.y_var03}} <!--
-->{{#vardefine:KERNEL_BRANCH|lf-6.1.y_var03}} <!--
-->{{#vardefine:KERNEL_COMMIT|f12b8d8c31d9f6c15fd2034efacaf77cbd3ed00b}} <!---
-->{{#vardefine:KERNEL_COMMIT|f12b8d8c31d9f6c15fd2034efacaf77cbd3ed00b}} <!---
-->{{#vardefine:KERNEL_RECIPE_VER|6.1.36}} <!--
-->{{#vardefine:KERNEL_RECIPE_VER|6.1}} <!--
-->{{#vardefine:KERNEL_VER|6.1.36}} <!--
-->{{#vardefine:KERNEL_VER|6.1.36}} <!--


Line 1,617: Line 1,617:
-->{{#vardefine:RELEASE_DATE|3/21/2024}} <!--
-->{{#vardefine:RELEASE_DATE|3/21/2024}} <!--
-->{{#vardefine:RELEASE_NAME|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}} <!--
-->{{#vardefine:RELEASE_NAME|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}} <!--
-->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-mickledore-6.1.36_2.1.0-v1.2__android-13.0.0_1.0.0-v1.1}} <!--
-->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-mickledore-6.1.36_2.1.0-v1.2__android-14.0.0_1.0.0-v1.0}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!--
-->{{#vardefine:RECOVERY_SD_SHA256|075fab5c2bfbf5c17552ab98444d427db5d82a4da72933f686e29e716a9b7135}} <!--
-->{{#vardefine:RECOVERY_SD_SHA256|4d8ac44031f09dd62f75ad2af17f0b3ad94ded5fc81404d87c3c8715a2dbcae6}} <!--


     Kernel (Variscite)
     Kernel (Variscite)
Line 1,646: Line 1,646:
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/>
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/>


= Release Notes =
=== mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3 ===
<section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/><!--
    RELEASE (Variscite)
-->{{#vardefine:RELEASE_DATE|09/16/2024}} <!--
-->{{#vardefine:RELEASE_NAME|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3}} <!--
-->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-mickledore-6.1.36_2.1.0-v1.3__android-14.0.0_1.0.0-v1.1}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!--
-->{{#vardefine:RECOVERY_SD_SHA256|93ef4997b43748231dd4b38c9ec7d2005dc070fcfbe1b1f70768c1b83e1e4619}} <!--
 
    U-Boot
-->{{#vardefine:U-BOOT_COMMIT|ca1dfc1574ad614f90f2cf3a120e950dabed848a}} <!--
 
    Kernel (Variscite)
-->{{#vardefine:KERNEL_COMMIT|6ca9be825a866673719c18c45ceda7e22dcd23c3}} <!---


<includeonly><section begin=RELEASE_NOTES/>
    meta-variscite:
<section begin=RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/>
-->{{VARDEFINE_GIT
|-
    |NAME=META_VARISCITE_BSP_COMMON|REPO=meta-variscite-bsp-common|GIT=https://github.com/varigit|
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
    |BRANCH=mickledore-var02|COMMIT=5d9128d134a3ab15a4ff97657e498b940467f814
|-
  }}<!--
| '''U-Boot updates''' ||
  -->{{VARDEFINE_GIT
|-
    |NAME=META_VARISCITE|REPO=meta-variscite-bsp-imx|GIT=https://github.com/varigit|
| Add memory node to DT ||
    |BRANCH=mickledore-var02|COMMIT=43ffbc389ecba5dd60b7188189c017ff9543b147
|-
  }}<!--
| Use of ptn5150 driver for extcon and OTG ||
  -->{{VARDEFINE_GIT
|-
    |NAME=META_VARISCITE_SDK|REPO=meta-variscite-sdk-imx|GIT=https://github.com/varigit|
| fec and eqos phy reset management with 20ms post-delay ||
    |BRANCH=mickledore-var02|COMMIT=3d0c94f6b126c121921645eb0a4abba0151ccf43
|-
  }}<!--
| '''Kernel updates''' ||
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/>
|-
 
| Add memory node to DT ||
=== mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0 ===
|-
<section begin=mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/><!--
| USB OTG use ptn5150 extcon for usb OTG ||
    RELEASE (NXP)
|-
-->{{#vardefine:FSL_BSP_VERSION|L6.6.23_2.0.0}} <!--
| '''Yocto updates''' ||
-->{{#vardefine:YOCTO_NAME|Scarthgap}} <!--
|-
-->{{#vardefine:YOCTO_VERSION|5.0}} <!--
| '''meta-variscite-bsp updates''' ||
|-
| Remove KERNEL_CONFIG_COMMAND as gold linker not compatible with kernel ||
|-
| systemd bug fixes for handling power key ||
|-
| freertos-variscite: Updated to 2.11.x support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott release based on NXP lf-5.10.72_2.2.1 || (kernel 5.10.72)
|-
! Known Issues !!
|-
| RPMSG Demos loaded from U-Boot don't work ||
|-
<section end=RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/>


<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/>
    RELEASE (Variscite)
|-
-->{{#vardefine:RELEASE_DATE|11/13/2024}} <!--
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
-->{{#vardefine:RELEASE_NAME|mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0}} <!--
|-
-->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-scarthgap-6.6.23_2.0.0-v1.0__android-14.0.0_1.0.0-v1.1}} <!--
| Initial Yocto Kirkstone release||Based on [https://github.com/Freescale/linux-fslc/commit/d818413e4d7901cb8a00a631a389326e2c93ae41 FSLC 5.15-2.0.x-imx] (kernel 5.15.60) which is based on [https://github.com/nxp-imx/linux-imx/commits/lf-5.15.32-2.0.0 NXP lf-5.15.32-2.0.0] and merged with [https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=v5.15.60 Linux Stable 5.15.60]
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!--
|-
-->{{#vardefine:RECOVERY_SD_SHA256|4990b39762aa61d63655b48eb2a6491d0a4dae8d6a8873e8393bf1b6c1fc8725}} <!--
! Known Issues !!
-->{{VARDEFINE_GIT
|-
  |NAME=YOCTO|REPO=variscite-bsp-platform|GIT=https://github.com/varigit|
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/ee1c511b1640a641a840aa48e313dd4d7e9652fa dnsmasq: enable dbus packageconfig]
  |BRANCH=scarthgap
|-
}}<!--
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/>
-->{{#vardefine:YOCTO_MANIFEST|imx-6.6.23-2.0.0.xml}} <!--
-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!--
-->{{#vardefine:SDCARD_IMG_EXT|wic.zst}} <!--
-->{{#vardefine:RECOVERY_SD_NAME_COMP|zst}} <!--


<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/>
    Toolchain
|-
-->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-armv8a-imx8mp-var-dart-toolchain-6.6-scarthgap.sh}} <!--
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
-->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-qt6-armv8a-imx8mp-var-dart-toolchain-6.6-scarthgap.sh}} <!--
|-
-->{{#vardefine:QT_VER|6}} <!--
| '''U-Boot updates''' ||
-->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/6.6-scarthgap}} <!--
|-
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv8a-poky-linux}} <!--
| Reduce cma_size to 576m for 1gb soms ||
-->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!--
|-
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/armv8a-poky-linux/}} <!--
| Add an empty entry for OPTEE at MMU table ||
-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!--
|-
 
| Use PHYS_SDRAM_LOW_MAX_SIZE for lower bank size logic ||
    Kernel (NXP)
|-
-->{{VARDEFINE_GIT
| '''Kernel updates''' ||
  |NAME=NXP_KERNEL|REPO=linux-imx|GIT=https://github.com/nxp-imx|
|-
  |BRANCH=lf-6.6.y
| Add aliases for ecspi instances ||
}}<!--
|-
-->{{#vardefine:NXP_KERNEL_GIT_LOG_URL|{{#var:NXP_KERNEL_GIT}}/commits/{{#var:NXP_KERNEL_BRANCH}}}} <!--
| Add 20ms delay to ethernet regulator enable ||
 
|-
    Kernel (Variscite)
| at803x: Save vddio regulator state during probe ||
-->{{VARDEFINE_GIT
|-
  |NAME=KERNEL|REPO=linux-imx|GIT=https://github.com/varigit|
| Fix PCI breaks on suspend ||
  |BRANCH=lf-6.6.y_6.6.23-2.0.0_var01|COMMIT=6cb72986bc16566363cf5b48415e7e38f6cc3521
|-
}}<!--
| Add start up delay for remoteproc ||
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
|-
-->{{#vardefine:KERNEL_RECIPE_VER|6.6}} <!--
| Cortex-M7: Fix hanging SDMA examples ||
-->{{#vardefine:KERNEL_VER|6.6.23}} <!--
|-
-->{{#vardefine:KERNEL_IMAGE|Image.gz}} <!--
| Change sn65dsi83 to built in ||
-->{{#vardefine:KERNEL_DEFCONFIG|imx8_var_defconfig}} <!--
|-
-->{{#vardefine:KERNEL_PAD_SIZE|N/A}} <!--
| '''Yocto updates''' ||
-->{{#vardefine:KERNEL_START_ADDRESS|N/A}} <!--
|-
-->{{#vardefine:KERNEL_DTB_SECTION|DART-MX8M-PLUS_DTB_V3}} <!--
| '''meta-variscite-bsp updates''' ||
-->{{#vardefine:DEFAULT_DTB|imx8mp-var-dart-dt8mcustomboard.dtb}} <!--
|-
-->{{#vardefine:DEFAULT_DTB_SOM|imx8mp-var-som-symphony.dtb}} <!--
| freertos-variscite: Add 2.12.x support ||
-->{{#vardefine:DTB_PREFIX|imx8mp-var-dart}} <!--
|-
-->{{#vardefine:DTB_START_ADDRESS|N/A}} <!--
| Configure op-tee memory to 4gb ||
|-
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/>


<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/>
    U-Boot
|-
-->{{VARDEFINE_GIT
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
  |NAME=U-BOOT|REPO=uboot-imx|GIT=https://github.com/varigit|
|-
  |BRANCH=lf_v2024.04_6.6.23-2.0.0_var01|COMMIT=fc434c2bf57ac20ce51ac9b35352e7c2497ffe20
| '''U-Boot updates''' ||
}}<!--
|-
-->{{#vardefine:SOC_DIR|SOC_DIR=imx-boot-tools}} <!--
| Remove eth1_phy_rst_hog on Carriers || This makes the PHY reset delays consistent with the values declared in the device tree file
-->{{#vardefine:IMX_MKIMAGE_SOC_PATCH|recipes-bsp/imx-mkimage/imx-boot/0001-iMX8M-soc-allow-dtb-override.patch}} <!--
|-
-->{{#vardefine:IMX_MKIMAGE_SOC_PATCH_1|recipes-bsp/imx-mkimage/imx-boot/0002-iMX8M-soc-change-padding-of-DDR4-and-LPDDR4-DMEM-fir.patch}} <!--
| Fix eth0 fail on legacy dt8mcustomboard ||
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/imx8mp_var_dart.h}} <!--
|-
-->{{#vardefine:U-BOOT_BOARD_NAME|imx8mp_var_dart}} <!--
| Add vddio-regulator for AR8033 PHY on Carriers || This fixes Ethernet over Carrier not working in U-Boot with atheros PHY.
-->{{#vardefine:U-BOOT_DTB_SOM|imx8mp-var-som-symphony.dtb}} <!--
|-
-->{{#vardefine:U-BOOT_DTB_DART|imx8mp-var-dart-dt8mcustomboard.dtb}} <!--
| '''Kernel updates''' ||
-->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot}} <!--
|-
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!--
| Disable phy for eth1 on legacy dt8mcustomboard ||
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8mp_var_dart_defconfig}} <!--
|-
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|N/A}} <!--
| Drop using "snps,reset-gpio" for DART-MX8M-PLUS ||
-->{{#vardefine:U-BOOT_OFFSET|32}} <!--
|-
-->{{#vardefine:U-BOOT_EMMC_DEV|2}} <!--
| net: mdio: manage deassert time when controlling MDIO reset signal ||
-->{{#vardefine:U-BOOT_SD_DEV|1}} <!--
|-
-->{{#vardefine:U-BOOT_UMS_DEV|0}} <!--
| net: fec: manage corner deferred probe condition ||
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!--
|-
-->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!--
| net: mdio: force deassert MDIO reset signal ||
-->{{#vardefine:READ_ONLY_ROOTFS|no}} <!--
|-
-->{{#vardefine:SPL_SD_IMAGE_NAME|N/A}} <!--
| Drop enabling multiple queues on eqos || This fixes the eth0 issue when stressed with iperf3 tests
-->{{#vardefine:SD_TREE_SECTION|DART-MX8M-PLUS_SD_TREE}} <!--
|-
-->{{#vardefine:RAM_LOAD_ADDRESS|0x40480000}} <!--
| enable pull-up for the ethernet phy reset on the SOMs ||
-->{{#vardefine:SUPPORTED_REV_SOM|DART-MX8M-PLUS: v1.1 and higher, VAR-SOM-MX8M-PLUS: v1.1 and higher}} <!--
|-
| arm64: imx8_var_defconfig: change usb ehci and ohci drivers to loadable ||
|-
| '''Yocto updates''' ||
|-
| '''meta-variscite-bsp updates''' ||
|-
| linux-firmware: bc43xx: add symbolic link to firmware for each model ||
|-
| linux-firmware: bc43xx: add symbolic link to firmware for each machine ||
|-
| Revert "variscite-wifi.service: Disable service stop" ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 10.54.0.13" ||
|-
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/>


<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
    Firmware
|-
-->{{#vardefine:NXP_IMX_GIT|https://github.com/nxp-imx}} <!--
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
-->{{#vardefine:NXP_IMX_BRANCH|lf-6.6.23_2.0.0}} <!--
|-
-->{{#vardefine:NXP_FIRMWARE_URL|https://www.nxp.com/lgfiles/NMG/MAD/YOCTO}} <!--
| Initial release||Based on FSLC Yocto Kirkstone and NXP Linux Kernel [https://github.com/nxp-imx/linux-imx/commit/3313732e9984cb8a6b10a9085c7e18d58e770d56 5.15.71_2.2.0]
-->{{#vardefine:NXP_FIRMWARE|firmware-imx-8.24-fbe0a4c}} <!--
|-
-->{{VARDEFINE_GIT
! Known Issues !!
  |NAME=VARISCITE_ATF|REPO=imx-atf|GIT=https://github.com/varigit|
|-
  |BRANCH=lf_v2.10_6.6.23-2.0.0_var01
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/d0da130db80df331610cac73405b049160bd3cd9 dnsmasq: enable dbus packageconfig]
}}<!--
|-
-->{{#vardefine:IMX_ATF_PLAT|imx8mp}} <!--
-->{{#vardefine:IMX_MKIMAGE_SOC|iMX8MP}} <!--


<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
    Basler:
-->{{#vardefine:META_BASLER_BRANCH|1.3.1.27-imx8mp-5.10.52-2.1.0}} <!--
-->{{#vardefine:META_BASLER_LOCALCONF_SECTION|DART-MX8M-PLUS_BASLER_LOCALCONF_HARDKNOTT}} <!--
-->{{#vardefine:META_BASLER_NXP_LOCALCONF_SECTION|}} <!--
-->{{#vardefine:META_BASLER_SUPPORT_AR0821|yes}} <!--
-->{{#vardefine:BASLER_SWITCH_CAM_SECTION|DART-MX8M-PLUS_BASLER_SWITCH_CAM_HARDKNOTT}} <!--
-->{{#vardefine:BASLER_NXP_SWITCH_CAM_SECTION|DART-MX8M-PLUS_BASLER_NXP_SWITCH_CAM_HARDKNOTT}} <!--
-->{{#vardefine:BASLER_GSTREAMER_SECTION|DART-MX8M-PLUS_BASLER_GSTREAMER_ZEUS-232}} <!--
-->{{#vardefine:BASLER_NXP_GSTREAMER_SECTION|DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_KIRKSTONE_DUAL}} <!--
-->{{#vardefine:YOCTO_SUPPORT_BASLER_NXP|yes}} <!--


=== RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1 ===
    additional support:
<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/>
-->{{#vardefine:BLUEZ_ALSA|1}}<!--
-->{{#vardefine:CM_UBOOT|1}} <!--
-->{{#vardefine:CM_RPROC|1}} <!--
-->{{#vardefine:CM_SERIES|7}} <!-- cortex-m7
-->{{#vardefine:CM_RELEASE|MCUXPRESSO_2.15.0_V1.0_DART-MX8M-PLUS}} <!--
-->{{#vardefine:YOCTO_SUPPORT_CHROMIUM|yes}} <!--
-->{{#vardefine:YOCTO_SUPPORT_BASLER|no}} <!--
-->{{#vardefine:YOCTO_SUPPORT_DOCKER|yes}} <!--
 
    meta-variscite:
-->{{VARDEFINE_GIT
    |NAME=META_VARISCITE_BSP_COMMON|REPO=meta-variscite-bsp-common|GIT=https://github.com/varigit|
    |BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=ee1f0311a6383c7f4e874376d2d46edefe6f5c6a
  }}<!--
  -->{{VARDEFINE_GIT
    |NAME=META_VARISCITE|REPO=meta-variscite-bsp-imx|GIT=https://github.com/varigit|
    |BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=9a1f323967fe9dcb68aa244e18470e5126c56fe2
  }}<!--
  -->{{VARDEFINE_GIT
    |NAME=META_VARISCITE_SDK_COMMON|REPO=meta-variscite-sdk-common|GIT=https://github.com/varigit|
    |BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=507269b8cb28367c04e2939bb5c8648c8cf8877b
  }}<!--
  -->{{VARDEFINE_GIT
    |NAME=META_VARISCITE_SDK|REPO=meta-variscite-sdk-imx|GIT=https://github.com/varigit|
    |BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=185534d54966010c481fa753e94c52c8e76d6fd0
  }}<!--
 
  -->{{NXP_WLAN_SDK_SCARTHGAP_6_6_23_VAR01}}<!--
  -->{{IW612_VARS}}<!--
  -->{{#vardefine:BUILD_YOCTO_IN_DOCKER_CONTAINER|yes}} <!--
  HOW DOCKER_CONTAINERS is built:
  - [22-04] is the Ubuntu container version (replaced "." with "-")
  - [fc27a5d] is the commit id (https://github.com/varigit/var-host-docker-containers/commit/fc27a5d9b6ef7facab50ebf27af18ae6269b0c4d) --> <!--
  -->{{#vardefine:DOCKER_CONTAINER_INFO|22-04-fc27a5d}} <!--
  -->{{#vardefine:NETWORK_MANAGER_IS_SYSTEMD|yes}} <!--
 
--><section end=mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/>
 
= Release Notes =
 
<includeonly><section begin=RELEASE_NOTES/>
<section begin=RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || Added Chromium with hardware accelerated graphics / GPU support
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add memory node to DT ||
|-
| Use of ptn5150 driver for extcon and OTG ||
|-
| fec and eqos phy reset management with 20ms post-delay ||
|-
|-
| '''Kernel updates''' ||
| '''Kernel updates''' ||
|-
|-
| net: phy: adin: Add flag to allow enabling of 1000base-t retrain ||
| Add memory node to DT ||
|-
|-
| net: phy: adin: Add flags to allow disabling of fast link down ||
| USB OTG use ptn5150 extcon for usb OTG ||
|-
|-
| '''Yocto updates''' ||
| '''Yocto updates''' ||
Line 1,809: Line 1,848:
| '''meta-variscite-bsp updates''' ||
| '''meta-variscite-bsp updates''' ||
|-
|-
| conf: variscite: add variscite-mirrors for codeaurora ||
| Remove KERNEL_CONFIG_COMMAND as gold linker not compatible with kernel ||
|-
|-
| conf: variscite: add variscite-mirrors for https ||
| systemd bug fixes for handling power key ||
|-
|-
| jailhouse: migrate source from codeaurora to github ||
| freertos-variscite: Updated to 2.11.x support ||
|-
|-
| '''meta-variscite-sdk updates''' ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| fsl-image-gui-chromium: launch Chromium as non-root user to avoid warning ||
| Initial Yocto Hardknott release based on NXP lf-5.10.72_2.2.1 || (kernel 5.10.72)
|-
|-
| fsl-image-gui-chromium, weston-init: add launcher for Chromium in weston.ini ||
! Known Issues !!
|-
|-
| images: Add new fsl-image-gui-chromium image recipe ||
| RPMSG Demos loaded from U-Boot don't work ||
|-
|-
| var-mii: Introduce native recipe variant ||
<section end=RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/>
 
<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| var-mii: introduce recipe ||
| Initial Yocto Kirkstone release||Based on [https://github.com/Freescale/linux-fslc/commit/d818413e4d7901cb8a00a631a389326e2c93ae41 FSLC 5.15-2.0.x-imx] (kernel 5.15.60) which is based on [https://github.com/nxp-imx/linux-imx/commits/lf-5.15.32-2.0.0 NXP lf-5.15.32-2.0.0] and merged with [https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=v5.15.60 Linux Stable 5.15.60]
|-
|-
| var-create-yocto-sdcard.sh: add DEFAULT_IMAGE argument ||
! Known Issues !!
|-
|-
| keyctl-caam: migrate source from codeaurora to github ||
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/ee1c511b1640a641a840aa48e313dd4d7e9652fa dnsmasq: enable dbus packageconfig]
|-
|-
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/>
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/>


<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/>
<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| '''Kernel updates''' ||
| '''U-Boot updates''' ||
|-
|-
| devicetree: basler: Add support for dual camera on hardware supporting it || Dual MIPI-CSI channel is currently available only on DART-MX8M-PLUS due to hardware limitations of Symphony board with VAR-SOM-MX8M-PLUS
| Reduce cma_size to 576m for 1gb soms ||
|-
|-
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/>
| Add an empty entry for OPTEE at MMU table ||
 
<section begin=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Use PHYS_SDRAM_LOW_MAX_SIZE for lower bank size logic ||
|-
|-
| Initial release||Based on NXP Yocto Mickledore and NXP Linux Kernel [https://github.com/nxp-imx/linux-imx/commit/66e442bc7fdcc935e6faa94c743f653263d4ed67 lf-6.1.y]
| '''Kernel updates''' ||
|-
|-
! Known Issues !!
| Add aliases for ecspi instances ||
|-
|-
| Running "shutdown" from the command line reboots the board || Fixed by [https://github.com/varigit/imx-atf/commit/77a5654eb12f67bb3e677b7142ac6128b898d348 Revert "MA-20141 imx8m: enable alarm when shutdown"]
| Add 20ms delay to ethernet regulator enable ||
|-
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/>
| at803x: Save vddio regulator state during probe ||
 
<section begin=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| Fix PCI breaks on suspend ||
|-
|-
| '''Kernel updates''' ||
| Add start up delay for remoteproc ||
|-
|-
| devicetree: basler: Add support for dual camera on hardware supporting it || Dual MIPI-CSI channel is currently available only on DART-MX8M-PLUS due to hardware limitations of Symphony board with VAR-SOM-MX8M-PLUS
| Cortex-M7: Fix hanging SDMA examples ||
|-
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/>
| Change sn65dsi83 to built in ||
 
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0 ===
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| '''Yocto updates''' ||
|-
|-
| Initial release||Based on NXP Yocto Mickledore and NXP Linux Kernel 6.1.36 [https://github.com/nxp-imx/linux-imx/commit/04b05c5527e9af8d81254638c307df07dc9a5dd3 lf-6.1.y]
| '''meta-variscite-bsp updates''' ||
|-
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/>
| freertos-variscite: Add 2.12.x support ||
 
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1 ===
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| Configure op-tee memory to 4gb ||
|-
|-
|<strong>Major Updates</strong> ||
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/>
 
<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/>
|-
|-
| Add support for VAR-SOM-MX8M-PLUS V2.0|| See [https://variwiki.com/index.php?title=VAR-SOM-MX8M-PLUS_rev_changelog#VAR-SOM-MX8M-PLUS_V2.0 VAR-SOM-MX8M-PLUS changelog] for more information.
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| Drop support for DT8MCustomboard V1.x||
| '''U-Boot updates''' ||
|-
|-
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=63183f4b534cc74a5c20cdfbd1ea844ee726986d|new_commit={{#var:U-BOOT_COMMIT}}}}
| Remove eth1_phy_rst_hog on Carriers || This makes the PHY reset delays consistent with the values declared in the device tree file
|-
|-
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=f12b8d8c31d9f6c15fd2034efacaf77cbd3ed00b|new_commit={{#var:KERNEL_COMMIT}}}}
| Fix eth0 fail on legacy dt8mcustomboard ||
|-
|-
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=09b06d082222b5178640e506d0bf5adf3efa2ba9|new_commit={{#var:META_VARISCITE_COMMIT}}}}
| Add vddio-regulator for AR8033 PHY on Carriers || This fixes Ethernet over Carrier not working in U-Boot with atheros PHY.
|-
|-
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=1c3152af48bccec6be024a33e81c766725681489|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}}
| '''Kernel updates''' ||
|-
|-
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=7df2efc2d90c54e5f360fdd6f17cbc582ff09c8d|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}}
| Disable phy for eth1 on legacy dt8mcustomboard ||
|-
|-
{{GIT_UPDATES|name=meta-variscite-sdk-common|git_http={{#var:META_VARISCITE_SDK_COMMON_HTTP}}|old_commit=a51b2157f9b38b6261c383f3da80e84e35b1a99f|new_commit={{#var:META_VARISCITE_SDK_COMMON_COMMIT}}}}
| Drop using "snps,reset-gpio" for DART-MX8M-PLUS ||
|-
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/>
| net: mdio: manage deassert time when controlling MDIO reset signal ||
 
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2 ===
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| net: fec: manage corner deferred probe condition ||
|-
|-
|<strong>Major Updates</strong> ||
| net: mdio: force deassert MDIO reset signal ||
|-
|-
| Additional patches to support VAR-SOM-MX8M-PLUS V2.0 ||
| Drop enabling multiple queues on eqos || This fixes the eth0 issue when stressed with iperf3 tests
|-
| enable pull-up for the ethernet phy reset on the SOMs ||
|-
|-
|<strong>Known Issues<strong> ||
| arm64: imx8_var_defconfig: change usb ehci and ohci drivers to loadable ||
|-
|-
| install_android.sh does not work on VAR-SOM-MX8M-PLUS v2.0 | Android 13.0.0_1.0.0 does not yet support VAR-SOM-MX8M-PLUS v2.0 and will hang early in boot without: https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644.
| '''Yocto updates''' ||
|-
|-
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=837361a39bc87d1aae3e13dc92853cf1dbc2ed56|new_commit={{#var:U-BOOT_COMMIT}}}}
| '''meta-variscite-bsp updates''' ||
|-
|-
| [https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644 imx8mp_var_dart: fix board_id detect for VAR-SOM-MX8M-PLUS 2.0] ||  
| linux-firmware: bc43xx: add symbolic link to firmware for each model ||
|-
|-
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=7c99305a876839d2011015d61aba2658826c1857|new_commit={{#var:KERNEL_COMMIT}}}}
| linux-firmware: bc43xx: add symbolic link to firmware for each machine ||
|-
|-
| Several enhancements to OV5640 camera driver || See [https://github.com/varigit/linux-imx/compare/7c99305a876839d2011015d61aba2658826c1857...210b0daa8d34839aa4b3547d9c8dbaf6353d8771 7c99305a8...210b0daa8]
| Revert "variscite-wifi.service: Disable service stop" ||
|-
|-
| [https://github.com/varigit/linux-imx/commit/cc03d1cb7ba23d85a54af6f8c420852493312008 imx8mp-var-som: fix compile warnings ] ||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 10.54.0.13" ||
|-
|-
| [https://github.com/varigit/linux-imx/commit/35fcc48a4b5b844f4ab671a4a7b425a1f62170f5 imx8mp-var-som: fix pinctrl for 802.15.4] ||
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/>
 
<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
|-
|-
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=c85341ddca37f85f722b52d98d789f0014c57e49|new_commit={{#var:META_VARISCITE_COMMIT}}}}
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| [https://github.com/varigit/meta-variscite-bsp-imx/commit/b023192397ba0bc1e4ff7c52647403b769b68ace iw612-utils: iw612-bt: imx8mp-var-som: wait for hci interface to come up ] ||
| Initial release||Based on FSLC Yocto Kirkstone and NXP Linux kernel [https://github.com/nxp-imx/linux-imx/commit/3313732e9984cb8a6b10a9085c7e18d58e770d56 5.15.71_2.2.0]
|-
|-
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=d2767459431ed22dcff652882fdc3bcec18d86b3|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}}
! Known Issues !!
|-
|-
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=64bc68ea16f283490a9a98a63500a4d366cb7416|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}}
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/d0da130db80df331610cac73405b049160bd3cd9 dnsmasq: enable dbus packageconfig]
|-
 
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/>
 
=== RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1 ===
<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || Added Chromium with hardware accelerated graphics / GPU support
|-
| '''Kernel updates''' ||
|-
| net: phy: adin: Add flag to allow enabling of 1000base-t retrain ||
|-
| net: phy: adin: Add flags to allow disabling of fast link down ||
|-
| '''Yocto updates''' ||
|-
| '''meta-variscite-bsp updates''' ||
|-
| conf: variscite: add variscite-mirrors for codeaurora ||
|-
| conf: variscite: add variscite-mirrors for https ||
|-
| jailhouse: migrate source from codeaurora to github ||
|-
| '''meta-variscite-sdk updates''' ||
|-
| fsl-image-gui-chromium: launch Chromium as non-root user to avoid warning ||
|-
| fsl-image-gui-chromium, weston-init: add launcher for Chromium in weston.ini ||
|-
| images: Add new fsl-image-gui-chromium image recipe ||
|-
| var-mii: Introduce native recipe variant ||
|-
| var-mii: introduce recipe ||
|-
| var-create-yocto-sdcard.sh: add DEFAULT_IMAGE argument ||
|-
| keyctl-caam: migrate source from codeaurora to github ||
|-
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/>
 
<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''Kernel updates''' ||
|-
| devicetree: basler: Add support for dual camera on hardware supporting it || Dual MIPI-CSI channel is currently available only on DART-MX8M-PLUS due to hardware limitations of Symphony board with VAR-SOM-MX8M-PLUS
|-
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/>
 
<section begin=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release||Based on NXP Yocto Mickledore and NXP Linux kernel [https://github.com/nxp-imx/linux-imx/commit/66e442bc7fdcc935e6faa94c743f653263d4ed67 lf-6.1.y]
|-
! Known Issues !!
|-
| GPU memory allocation fail for 2GB or less SoMs || Fixed by [https://github.com/varigit/linux-imx/commit/a5ba39286647609407a08300699187127c56ed04 RND-2193: imx8mp-var-dart: Move gpu_reserved below 1GB]
|-
| Running "shutdown" from the command line reboots the board || Fixed by [https://github.com/varigit/imx-atf/commit/77a5654eb12f67bb3e677b7142ac6128b898d348 Revert "MA-20141 imx8m: enable alarm when shutdown"]
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/>
 
<section begin=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Kernel updates''' ||
|-
| devicetree: basler: Add support for dual camera on hardware supporting it || Dual MIPI-CSI channel is currently available only on DART-MX8M-PLUS due to hardware limitations of Symphony board with VAR-SOM-MX8M-PLUS
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/>
 
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0 ===
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release||Based on NXP Yocto Mickledore and NXP Linux Kernel 6.1.36 [https://github.com/nxp-imx/linux-imx/commit/04b05c5527e9af8d81254638c307df07dc9a5dd3 lf-6.1.y]
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/>
 
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1 ===
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|<strong>Major Updates</strong> ||
|-
| Add support for VAR-SOM-MX8M-PLUS V2.0|| See [https://variwiki.com/index.php?title=VAR-SOM-MX8M-PLUS_rev_changelog#VAR-SOM-MX8M-PLUS_V2.0 VAR-SOM-MX8M-PLUS changelog] for more information.
|-
| Drop support for DT8MCustomboard V1.x||
|-
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=63183f4b534cc74a5c20cdfbd1ea844ee726986d|new_commit={{#var:U-BOOT_COMMIT}}}}
|-
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=f12b8d8c31d9f6c15fd2034efacaf77cbd3ed00b|new_commit={{#var:KERNEL_COMMIT}}}}
|-
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=09b06d082222b5178640e506d0bf5adf3efa2ba9|new_commit={{#var:META_VARISCITE_COMMIT}}}}
|-
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=1c3152af48bccec6be024a33e81c766725681489|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}}
|-
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=7df2efc2d90c54e5f360fdd6f17cbc582ff09c8d|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}}
|-
{{GIT_UPDATES|name=meta-variscite-sdk-common|git_http={{#var:META_VARISCITE_SDK_COMMON_HTTP}}|old_commit=a51b2157f9b38b6261c383f3da80e84e35b1a99f|new_commit={{#var:META_VARISCITE_SDK_COMMON_COMMIT}}}}
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/>
 
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2 ===
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|<strong>Major Updates</strong> ||
|-
| Additional patches to support VAR-SOM-MX8M-PLUS V2.0 ||
|-
|<strong>Known Issues<strong> ||
|-
| install_android.sh does not work on VAR-SOM-MX8M-PLUS v2.0 || Android 13.0.0_1.0.0 does not yet support VAR-SOM-MX8M-PLUS v2.0 and will hang early in boot without: https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644.
|-
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=837361a39bc87d1aae3e13dc92853cf1dbc2ed56|new_commit={{#var:U-BOOT_COMMIT}}}}
|-
| [https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644 imx8mp_var_dart: fix board_id detect for VAR-SOM-MX8M-PLUS 2.0] ||
|-
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=7c99305a876839d2011015d61aba2658826c1857|new_commit={{#var:KERNEL_COMMIT}}}}
|-
| Several enhancements to OV5640 camera driver || See [https://github.com/varigit/linux-imx/compare/7c99305a876839d2011015d61aba2658826c1857...210b0daa8d34839aa4b3547d9c8dbaf6353d8771 7c99305a8...210b0daa8]
|-
| [https://github.com/varigit/linux-imx/commit/cc03d1cb7ba23d85a54af6f8c420852493312008 imx8mp-var-som: fix compile warnings ] ||
|-
| [https://github.com/varigit/linux-imx/commit/35fcc48a4b5b844f4ab671a4a7b425a1f62170f5 imx8mp-var-som: fix pinctrl for 802.15.4] ||
|-
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=c85341ddca37f85f722b52d98d789f0014c57e49|new_commit={{#var:META_VARISCITE_COMMIT}}}}
|-
| [https://github.com/varigit/meta-variscite-bsp-imx/commit/b023192397ba0bc1e4ff7c52647403b769b68ace iw612-utils: iw612-bt: imx8mp-var-som: wait for hci interface to come up ] ||
|-
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=d2767459431ed22dcff652882fdc3bcec18d86b3|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}}
|-
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=64bc68ea16f283490a9a98a63500a4d366cb7416|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}}
|-
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/>
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/>
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3 ===
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
|<strong>Major Updates</strong> ||
|-
| Additional patches to support DART-MX8M-PLUS V2.0 ||
|-
| Relocate gpu_reserved memory to be within 1GB of RAM ||
|-
|<strong>Known Issues<strong> ||
|-
| install_android.sh does not work on VAR-SOM-MX8M-PLUS v2.0 || Android 13.0.0_1.0.0 does not yet support VAR-SOM-MX8M-PLUS v2.0 and will hang early in boot without: https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644.
|-
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=7cb218c229b62865d79a0a1f327a4f020dc35644|new_commit={{#var:U-BOOT_COMMIT}}}}
|-
| Add support for DART-MX8M-PLUS 2.0 || See [https://github.com/varigit/uboot-imx/compare/987f2c8c44da6afe5deaa25f8f760d743664a175...ca1dfc1574ad614f90f2cf3a120e950dabed848a 987f2c8c44da...ca1dfc1574ad]
|-
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=a6ba3adc78a578bfaf3bc005062077fd9e0e1b49|new_commit={{#var:KERNEL_COMMIT}}}}
|-
| [https://github.com/varigit/linux-imx/commit/6ca9be825a866673719c18c45ceda7e22dcd23c3 imx8mp-var-dart: add support for DART-MX8M-PLUS 2.0] ||
|-
| [https://github.com/varigit/linux-imx/commit/e2625eeb11fd9df8f42ba4bba3aeb204dde9c728 imx8mp-var-som: fix pinctrl for 802.15.4] ||
|-
| [https://github.com/varigit/linux-imx/commit/f6ad7479b376784d62b7225e82729b01d6b8602e RND-2193: imx8mp-var-dart: Move gpu_reserved below 1GB] ||
|-
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=ffda6c84950fde890eaa53b00e8c3b53d1e1d99a|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}}
|-
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=7c9a2a00be89fa15679718a817c386c3f8e75dcf|new_commit={{#var:META_VARISCITE_COMMIT}}}}
|-
| [https://github.com/varigit/meta-variscite-bsp-imx/commit/43ffbc389ecba5dd60b7188189c017ff9543b147 Add support for DART-MX8M-PLUS v2.0] ||
|-
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=cf44a79cc6099f5d69b918c80b21f4d52fa7c391|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}}
|-
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/>
=== RN_mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0 ===
<section begin=RN_mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release||Based on NXP Yocto Scarthgap and NXP Linux Kernel 6.6.23 [https://github.com/nxp-imx/linux-imx/commit/b586a521770e508d1d440ccb085c7696b9d6d387 lf-6.6.y]
|-
| '''Known Issues''' ||
|-
| Problem using variscite-rproc-u-boot with versions earlier than v2.0: the Device Tree is set incorrectly, causing Wi-Fi and Bluetooth to fail. || To fix this, manually set the M7 Device Tree.
|-
| Access point not working on Laird LWB5 chipset || The command to create virtual uap0 fails.
|-
| 802.15.4 / Openthread is not working on IW612 chipset ||
|-
| meta-qt6 and meta-browser both provide gn-native, breaking the SDK generation for fsl-image-qt6 || To fix it add the line BBMASK += "/meta-browser/meta-chromium/recipes-browser/chromium/gn-native_.*\.bb" in the local.conf<br>Note: fsl-image-chromium will no longer build.
|-
<section end=RN_mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/>
<section end=RELEASE_NOTES/></includeonly>
<section end=RELEASE_NOTES/></includeonly>

Revision as of 22:07, 20 November 2024

Common Variables

Common Before


Common After


Releases

zeus-fsl-5.4.47-mx8mp-v1.0


zeus-fsl-5.4.70-mx8mp-v1.0


zeus-fsl-5.4.70-mx8mp-v1.1


zeus-fsl-5.4.70-mx8mp-v1.2


zeus-fsl-5.4.70_2.3.2-mx8mp-v1.0


zeus-fsl-5.4.70_2.3.2-mx8mp-v1.1


gatesgarth-fsl-5.10.9_1.0.0-mx8mp-v1.0


hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.0


hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.1


hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.2


hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.0


hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.1


hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.2


hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.3


mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0


mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1


mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0


mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1


mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2


mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0


mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1


mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2


mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0


mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1


mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0


mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1



mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2


mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3


mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0



Release Notes