YPC DART-MX8M-PLUS: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
(44 intermediate revisions by 8 users not shown) | |||
Line 124: | Line 124: | ||
-->{{#vardefine:DEFAULT_DTB_SD|imx8mp-var-dart.dtb}} <!-- | -->{{#vardefine:DEFAULT_DTB_SD|imx8mp-var-dart.dtb}} <!-- | ||
-->{{#vardefine:DEFAULT_DTB|imx8mp-var-dart.dtb}} <!-- | -->{{#vardefine:DEFAULT_DTB|imx8mp-var-dart.dtb}} <!-- | ||
-->{{#vardefine:SUPPORTED_REV_SOM|v1. | -->{{#vardefine:SUPPORTED_REV_SOM|v1.x}} <!-- | ||
-->{{#vardefine:SUPPORTED_REV_CARRIER|v1.4 and higher}} <!-- | -->{{#vardefine:SUPPORTED_REV_CARRIER|v1.4 and higher}} <!-- | ||
-->{{#vardefine:RELEASE_DATE|10/29/2020}} <section end=RELEASE_ZEUS_V1.0_DART-MX8M-PLUS/> | -->{{#vardefine:RELEASE_DATE|10/29/2020}} <section end=RELEASE_ZEUS_V1.0_DART-MX8M-PLUS/> | ||
Line 1,418: | Line 1,418: | ||
-->{{#vardefine:KERNEL_COMMIT|931be342d64b9908a9f60ec6afe7012981855341}} <!--- | -->{{#vardefine:KERNEL_COMMIT|931be342d64b9908a9f60ec6afe7012981855341}} <!--- | ||
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!-- | -->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!-- | ||
-->{{#vardefine:KERNEL_RECIPE_VER|6.1 | -->{{#vardefine:KERNEL_RECIPE_VER|6.1}} <!-- | ||
-->{{#vardefine:KERNEL_VER|6.1.22}} <!-- | -->{{#vardefine:KERNEL_VER|6.1.22}} <!-- | ||
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!-- | -->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!-- | ||
Line 1,443: | Line 1,443: | ||
-->{{#vardefine:U-BOOT_DTB_SOM|imx8mp-var-som-symphony.dtb}} <!-- | -->{{#vardefine:U-BOOT_DTB_SOM|imx8mp-var-som-symphony.dtb}} <!-- | ||
-->{{#vardefine:U-BOOT_DTB_DART|imx8mp-var-dart-dt8mcustomboard.dtb}} <!-- | -->{{#vardefine:U-BOOT_DTB_DART|imx8mp-var-dart-dt8mcustomboard.dtb}} <!-- | ||
-->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot-sd.bin}} <!-- | -->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot}} <!-- | ||
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!-- | |||
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8mp_var_dart_defconfig}} <!-- | -->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8mp_var_dart_defconfig}} <!-- | ||
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|N/A}} <!-- | -->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|N/A}} <!-- | ||
-->{{#vardefine:U-BOOT_OFFSET|32}} <!-- | -->{{#vardefine:U-BOOT_OFFSET|32}} <!-- | ||
Line 1,541: | Line 1,541: | ||
-->{{#vardefine:KERNEL_BRANCH|lf-6.1.y_var03}} <!-- | -->{{#vardefine:KERNEL_BRANCH|lf-6.1.y_var03}} <!-- | ||
-->{{#vardefine:KERNEL_COMMIT|f12b8d8c31d9f6c15fd2034efacaf77cbd3ed00b}} <!--- | -->{{#vardefine:KERNEL_COMMIT|f12b8d8c31d9f6c15fd2034efacaf77cbd3ed00b}} <!--- | ||
-->{{#vardefine:KERNEL_RECIPE_VER|6.1 | -->{{#vardefine:KERNEL_RECIPE_VER|6.1}} <!-- | ||
-->{{#vardefine:KERNEL_VER|6.1.36}} <!-- | -->{{#vardefine:KERNEL_VER|6.1.36}} <!-- | ||
Line 1,591: | Line 1,591: | ||
-->{{#vardefine:U-BOOT_COMMIT|837361a39bc87d1aae3e13dc92853cf1dbc2ed56}} <!-- | -->{{#vardefine:U-BOOT_COMMIT|837361a39bc87d1aae3e13dc92853cf1dbc2ed56}} <!-- | ||
-->{{NXP_WLAN_SDK_MICKLEDORE_6_1_36_VAR01}}<!-- | |||
-->{{IW612_VARS}}<!-- | -->{{IW612_VARS}}<!-- | ||
meta-variscite: | meta-variscite: | ||
Line 1,616: | Line 1,617: | ||
-->{{#vardefine:RELEASE_DATE|3/21/2024}} <!-- | -->{{#vardefine:RELEASE_DATE|3/21/2024}} <!-- | ||
-->{{#vardefine:RELEASE_NAME|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}} <!-- | -->{{#vardefine:RELEASE_NAME|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2}} <!-- | ||
-->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-mickledore-6.1.36_2.1.0-v1.2__android- | -->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-mickledore-6.1.36_2.1.0-v1.2__android-14.0.0_1.0.0-v1.0}} <!-- | ||
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!-- | -->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!-- | ||
-->{{#vardefine:RECOVERY_SD_SHA256| | -->{{#vardefine:RECOVERY_SD_SHA256|4d8ac44031f09dd62f75ad2af17f0b3ad94ded5fc81404d87c3c8715a2dbcae6}} <!-- | ||
Kernel (Variscite) | Kernel (Variscite) | ||
Line 1,645: | Line 1,646: | ||
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/> | --><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/> | ||
= | === mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3 === | ||
<section begin=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/><!-- | |||
RELEASE (Variscite) | |||
-->{{#vardefine:RELEASE_DATE|09/16/2024}} <!-- | |||
-->{{#vardefine:RELEASE_NAME|mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3}} <!-- | |||
-->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-mickledore-6.1.36_2.1.0-v1.3__android-14.0.0_1.0.0-v1.1}} <!-- | |||
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!-- | |||
-->{{#vardefine:RECOVERY_SD_SHA256|93ef4997b43748231dd4b38c9ec7d2005dc070fcfbe1b1f70768c1b83e1e4619}} <!-- | |||
U-Boot | |||
-->{{#vardefine:U-BOOT_COMMIT|ca1dfc1574ad614f90f2cf3a120e950dabed848a}} <!-- | |||
Kernel (Variscite) | |||
-->{{#vardefine:KERNEL_COMMIT|6ca9be825a866673719c18c45ceda7e22dcd23c3}} <!--- | |||
meta-variscite: | |||
-->{{VARDEFINE_GIT | |||
|NAME=META_VARISCITE_BSP_COMMON|REPO=meta-variscite-bsp-common|GIT=https://github.com/varigit| | |||
|BRANCH=mickledore-var02|COMMIT=5d9128d134a3ab15a4ff97657e498b940467f814 | |||
| | }}<!-- | ||
| | -->{{VARDEFINE_GIT | ||
|NAME=META_VARISCITE|REPO=meta-variscite-bsp-imx|GIT=https://github.com/varigit| | |||
|BRANCH=mickledore-var02|COMMIT=43ffbc389ecba5dd60b7188189c017ff9543b147 | |||
}}<!-- | |||
-->{{VARDEFINE_GIT | |||
|- | |NAME=META_VARISCITE_SDK|REPO=meta-variscite-sdk-imx|GIT=https://github.com/varigit| | ||
|BRANCH=mickledore-var02|COMMIT=3d0c94f6b126c121921645eb0a4abba0151ccf43 | |||
}}<!-- | |||
--><section end=mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/> | |||
| | |||
|- | |||
| | |||
| | |||
| | |||
|- | |||
| | |||
<section end= | |||
<section begin= | === mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0 === | ||
|- | <section begin=mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/><!-- | ||
RELEASE (NXP) | |||
-->{{#vardefine:FSL_BSP_VERSION|L6.6.23_2.0.0}} <!-- | |||
| | -->{{#vardefine:YOCTO_NAME|Scarthgap}} <!-- | ||
|- | -->{{#vardefine:YOCTO_VERSION|5.0}} <!-- | ||
! | |||
RELEASE (Variscite) | |||
| | -->{{#vardefine:RELEASE_DATE|11/13/2024}} <!-- | ||
|- | -->{{#vardefine:RELEASE_NAME|mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0}} <!-- | ||
-->{{#vardefine:RECOVERY_BASE_NAME|mx8mp__yocto-scarthgap-6.6.23_2.0.0-v1.0__android-14.0.0_1.0.0-v1.1}} <!-- | |||
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!-- | |||
-->{{#vardefine:RECOVERY_SD_SHA256|4990b39762aa61d63655b48eb2a6491d0a4dae8d6a8873e8393bf1b6c1fc8725}} <!-- | |||
-->{{VARDEFINE_GIT | |||
|NAME=YOCTO|REPO=variscite-bsp-platform|GIT=https://github.com/varigit| | |||
|BRANCH=scarthgap | |||
}}<!-- | |||
-->{{#vardefine:YOCTO_MANIFEST|imx-6.6.23-2.0.0.xml}} <!-- | |||
-->{{#vardefine:BUILD_DISTRO|fsl-imx-xwayland}} <!-- | |||
-->{{#vardefine:SDCARD_IMG_EXT|wic.zst}} <!-- | |||
-->{{#vardefine:RECOVERY_SD_NAME_COMP|zst}} <!-- | |||
Toolchain | |||
|- | -->{{#vardefine:TOOLCHAIN_INSTALL_XWAYLAND_NAME|fsl-imx-xwayland-glibc-x86_64-meta-toolchain-armv8a-imx8mp-var-dart-toolchain-6.6-scarthgap.sh}} <!-- | ||
| | -->{{#vardefine:TOOLCHAIN_INSTALL_QT5_NAME|fsl-imx-xwayland-glibc-x86_64-fsl-image-qt6-armv8a-imx8mp-var-dart-toolchain-6.6-scarthgap.sh}} <!-- | ||
|- | -->{{#vardefine:QT_VER|6}} <!-- | ||
| | -->{{#vardefine:TOOLCHAIN_ROOT_LOCATION|/opt/fsl-imx-xwayland/6.6-scarthgap}} <!-- | ||
-->{{#vardefine:TOOLCHAIN_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/environment-setup-armv8a-poky-linux}} <!-- | |||
| | -->{{#vardefine:TOOLCHAIN_HOST_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/x86_64-pokysdk-linux}} <!-- | ||
-->{{#vardefine:TOOLCHAIN_TARGET_SYSROOT_LOCATION|{{#var:TOOLCHAIN_ROOT_LOCATION}}/sysroots/armv8a-poky-linux/}} <!-- | |||
-->{{#vardefine:TOOLCHAIN_TYPE|aarch64-poky-linux}} <!-- | |||
|- | |||
Kernel (NXP) | |||
|- | -->{{VARDEFINE_GIT | ||
|NAME=NXP_KERNEL|REPO=linux-imx|GIT=https://github.com/nxp-imx| | |||
|BRANCH=lf-6.6.y | |||
}}<!-- | |||
-->{{#vardefine:NXP_KERNEL_GIT_LOG_URL|{{#var:NXP_KERNEL_GIT}}/commits/{{#var:NXP_KERNEL_BRANCH}}}} <!-- | |||
| | |||
|- | Kernel (Variscite) | ||
| | -->{{VARDEFINE_GIT | ||
|- | |NAME=KERNEL|REPO=linux-imx|GIT=https://github.com/varigit| | ||
|BRANCH=lf-6.6.y_6.6.23-2.0.0_var01|COMMIT=6cb72986bc16566363cf5b48415e7e38f6cc3521 | |||
}}<!-- | |||
| | -->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!-- | ||
|- | -->{{#vardefine:KERNEL_RECIPE_VER|6.6}} <!-- | ||
-->{{#vardefine:KERNEL_VER|6.6.23}} <!-- | |||
|- | -->{{#vardefine:KERNEL_IMAGE|Image.gz}} <!-- | ||
| | -->{{#vardefine:KERNEL_DEFCONFIG|imx8_var_defconfig}} <!-- | ||
|- | -->{{#vardefine:KERNEL_PAD_SIZE|N/A}} <!-- | ||
| | -->{{#vardefine:KERNEL_START_ADDRESS|N/A}} <!-- | ||
|- | -->{{#vardefine:KERNEL_DTB_SECTION|DART-MX8M-PLUS_DTB_V3}} <!-- | ||
| | -->{{#vardefine:DEFAULT_DTB|imx8mp-var-dart-dt8mcustomboard.dtb}} <!-- | ||
|- | -->{{#vardefine:DEFAULT_DTB_SOM|imx8mp-var-som-symphony.dtb}} <!-- | ||
-->{{#vardefine:DTB_PREFIX|imx8mp-var-dart}} <!-- | |||
-->{{#vardefine:DTB_START_ADDRESS|N/A}} <!-- | |||
| | |||
< | |||
U-Boot | |||
|- | -->{{VARDEFINE_GIT | ||
| < | |NAME=U-BOOT|REPO=uboot-imx|GIT=https://github.com/varigit| | ||
|- | |BRANCH=lf_v2024.04_6.6.23-2.0.0_var01|COMMIT=fc434c2bf57ac20ce51ac9b35352e7c2497ffe20 | ||
}}<!-- | |||
|- | -->{{#vardefine:SOC_DIR|SOC_DIR=imx-boot-tools}} <!-- | ||
-->{{#vardefine:IMX_MKIMAGE_SOC_PATCH|recipes-bsp/imx-mkimage/imx-boot/0001-iMX8M-soc-allow-dtb-override.patch}} <!-- | |||
-->{{#vardefine:IMX_MKIMAGE_SOC_PATCH_1|recipes-bsp/imx-mkimage/imx-boot/0002-iMX8M-soc-change-padding-of-DDR4-and-LPDDR4-DMEM-fir.patch}} <!-- | |||
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/imx8mp_var_dart.h}} <!-- | |||
|- | -->{{#vardefine:U-BOOT_BOARD_NAME|imx8mp_var_dart}} <!-- | ||
| | -->{{#vardefine:U-BOOT_DTB_SOM|imx8mp-var-som-symphony.dtb}} <!-- | ||
|- | -->{{#vardefine:U-BOOT_DTB_DART|imx8mp-var-dart-dt8mcustomboard.dtb}} <!-- | ||
| | -->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot}} <!-- | ||
|- | -->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!-- | ||
| | -->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8mp_var_dart_defconfig}} <!-- | ||
|- | -->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|N/A}} <!-- | ||
| | -->{{#vardefine:U-BOOT_OFFSET|32}} <!-- | ||
|- | -->{{#vardefine:U-BOOT_EMMC_DEV|2}} <!-- | ||
-->{{#vardefine:U-BOOT_SD_DEV|1}} <!-- | |||
|- | -->{{#vardefine:U-BOOT_UMS_DEV|0}} <!-- | ||
-->{{#vardefine:EMMC_ROOTFS_DEV|mmcblk2}} <!-- | |||
|- | -->{{#vardefine:EMMC_ROOTFS_PARTITION_NUM|p1}} <!-- | ||
| | -->{{#vardefine:READ_ONLY_ROOTFS|no}} <!-- | ||
-->{{#vardefine:SPL_SD_IMAGE_NAME|N/A}} <!-- | |||
-->{{#vardefine:SD_TREE_SECTION|DART-MX8M-PLUS_SD_TREE}} <!-- | |||
|- | -->{{#vardefine:RAM_LOAD_ADDRESS|0x40480000}} <!-- | ||
| | -->{{#vardefine:SUPPORTED_REV_SOM|DART-MX8M-PLUS: v1.1 and higher, VAR-SOM-MX8M-PLUS: v1.1 and higher}} <!-- | ||
|- | |||
Firmware | |||
-->{{#vardefine:NXP_IMX_GIT|https://github.com/nxp-imx}} <!-- | |||
| | -->{{#vardefine:NXP_IMX_BRANCH|lf-6.6.23_2.0.0}} <!-- | ||
|- | -->{{#vardefine:NXP_FIRMWARE_URL|https://www.nxp.com/lgfiles/NMG/MAD/YOCTO}} <!-- | ||
-->{{#vardefine:NXP_FIRMWARE|firmware-imx-8.24-fbe0a4c}} <!-- | |||
|- | -->{{VARDEFINE_GIT | ||
| | |NAME=VARISCITE_ATF|REPO=imx-atf|GIT=https://github.com/varigit| | ||
|- | |BRANCH=lf_v2.10_6.6.23-2.0.0_var01 | ||
}}<!-- | |||
|- | -->{{#vardefine:IMX_ATF_PLAT|imx8mp}} <!-- | ||
-->{{#vardefine:IMX_MKIMAGE_SOC|iMX8MP}} <!-- | |||
|- | |||
| | Basler: | ||
|- | -->{{#vardefine:META_BASLER_BRANCH|1.3.1.27-imx8mp-5.10.52-2.1.0}} <!-- | ||
< | -->{{#vardefine:META_BASLER_LOCALCONF_SECTION|DART-MX8M-PLUS_BASLER_LOCALCONF_HARDKNOTT}} <!-- | ||
-->{{#vardefine:META_BASLER_NXP_LOCALCONF_SECTION|}} <!-- | |||
-->{{#vardefine:META_BASLER_SUPPORT_AR0821|yes}} <!-- | |||
-->{{#vardefine:BASLER_SWITCH_CAM_SECTION|DART-MX8M-PLUS_BASLER_SWITCH_CAM_HARDKNOTT}} <!-- | |||
-->{{#vardefine:BASLER_NXP_SWITCH_CAM_SECTION|DART-MX8M-PLUS_BASLER_NXP_SWITCH_CAM_HARDKNOTT}} <!-- | |||
-->{{#vardefine:BASLER_GSTREAMER_SECTION|DART-MX8M-PLUS_BASLER_GSTREAMER_ZEUS-232}} <!-- | |||
-->{{#vardefine:BASLER_NXP_GSTREAMER_SECTION|DART-MX8M-PLUS_BASLER_NXP_GSTREAMER_KIRKSTONE_DUAL}} <!-- | |||
-->{{#vardefine:YOCTO_SUPPORT_BASLER_NXP|yes}} <!-- | |||
< | additional support: | ||
|- | -->{{#vardefine:BLUEZ_ALSA|1}}<!-- | ||
| < | -->{{#vardefine:CM_UBOOT|1}} <!-- | ||
|- | -->{{#vardefine:CM_RPROC|1}} <!-- | ||
| | -->{{#vardefine:CM_SERIES|7}} <!-- cortex-m7 | ||
-->{{#vardefine:CM_RELEASE|MCUXPRESSO_2.15.0_V1.0_DART-MX8M-PLUS}} <!-- | |||
-->{{#vardefine:YOCTO_SUPPORT_CHROMIUM|yes}} <!-- | |||
-->{{#vardefine:YOCTO_SUPPORT_BASLER|no}} <!-- | |||
-->{{#vardefine:YOCTO_SUPPORT_DOCKER|yes}} <!-- | |||
meta-variscite: | |||
-->{{VARDEFINE_GIT | |||
|NAME=META_VARISCITE_BSP_COMMON|REPO=meta-variscite-bsp-common|GIT=https://github.com/varigit| | |||
|BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=ee1f0311a6383c7f4e874376d2d46edefe6f5c6a | |||
}}<!-- | |||
-->{{VARDEFINE_GIT | |||
|NAME=META_VARISCITE|REPO=meta-variscite-bsp-imx|GIT=https://github.com/varigit| | |||
|BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=9a1f323967fe9dcb68aa244e18470e5126c56fe2 | |||
}}<!-- | |||
-->{{VARDEFINE_GIT | |||
|NAME=META_VARISCITE_SDK_COMMON|REPO=meta-variscite-sdk-common|GIT=https://github.com/varigit| | |||
|BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=507269b8cb28367c04e2939bb5c8648c8cf8877b | |||
}}<!-- | |||
-->{{VARDEFINE_GIT | |||
|NAME=META_VARISCITE_SDK|REPO=meta-variscite-sdk-imx|GIT=https://github.com/varigit| | |||
|BRANCH=scarthgap_6.6.23-2.0.0_var01|COMMIT=185534d54966010c481fa753e94c52c8e76d6fd0 | |||
}}<!-- | |||
-->{{NXP_WLAN_SDK_SCARTHGAP_6_6_23_VAR01}}<!-- | |||
-->{{IW612_VARS}}<!-- | |||
-->{{#vardefine:BUILD_YOCTO_IN_DOCKER_CONTAINER|yes}} <!-- | |||
HOW DOCKER_CONTAINERS is built: | |||
- [22-04] is the Ubuntu container version (replaced "." with "-") | |||
- [fc27a5d] is the commit id (https://github.com/varigit/var-host-docker-containers/commit/fc27a5d9b6ef7facab50ebf27af18ae6269b0c4d) --> <!-- | |||
-->{{#vardefine:DOCKER_CONTAINER_INFO|22-04-fc27a5d}} <!-- | |||
-->{{#vardefine:NETWORK_MANAGER_IS_SYSTEMD|yes}} <!-- | |||
--><section end=mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/> | |||
= Release Notes = | |||
<includeonly><section begin=RELEASE_NOTES/> | |||
<section begin=RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/> | |||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |- | ||
| | | '''U-Boot updates''' || | ||
|- | |- | ||
| Add memory node to DT || | |||
|- | |||
| Use of ptn5150 driver for extcon and OTG || | |||
|- | |- | ||
| | | fec and eqos phy reset management with 20ms post-delay || | ||
|- | |- | ||
| '''Kernel updates''' || | | '''Kernel updates''' || | ||
|- | |- | ||
| | | Add memory node to DT || | ||
|- | |- | ||
| | | USB OTG use ptn5150 extcon for usb OTG || | ||
|- | |- | ||
| '''Yocto updates''' || | | '''Yocto updates''' || | ||
Line 1,808: | Line 1,848: | ||
| '''meta-variscite-bsp updates''' || | | '''meta-variscite-bsp updates''' || | ||
|- | |- | ||
| | | Remove KERNEL_CONFIG_COMMAND as gold linker not compatible with kernel || | ||
|- | |||
| systemd bug fixes for handling power key || | |||
|- | |||
| freertos-variscite: Updated to 2.11.x support || | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Hardknott release based on NXP lf-5.10.72_2.2.1 || (kernel 5.10.72) | |||
|- | |||
! Known Issues !! | |||
|- | |- | ||
| conf: variscite: add variscite-mirrors for https || | | RPMSG Demos loaded from U-Boot don't work || | ||
|- | |||
<section end=RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1/> | |||
<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial Yocto Kirkstone release||Based on [https://github.com/Freescale/linux-fslc/commit/d818413e4d7901cb8a00a631a389326e2c93ae41 FSLC 5.15-2.0.x-imx] (kernel 5.15.60) which is based on [https://github.com/nxp-imx/linux-imx/commits/lf-5.15.32-2.0.0 NXP lf-5.15.32-2.0.0] and merged with [https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=v5.15.60 Linux Stable 5.15.60] | |||
|- | |||
! Known Issues !! | |||
|- | |||
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/ee1c511b1640a641a840aa48e313dd4d7e9652fa dnsmasq: enable dbus packageconfig] | |||
|- | |||
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0/> | |||
<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Reduce cma_size to 576m for 1gb soms || | |||
|- | |||
| Add an empty entry for OPTEE at MMU table || | |||
|- | |||
| Use PHYS_SDRAM_LOW_MAX_SIZE for lower bank size logic || | |||
|- | |||
| '''Kernel updates''' || | |||
|- | |||
| Add aliases for ecspi instances || | |||
|- | |||
| Add 20ms delay to ethernet regulator enable || | |||
|- | |||
| at803x: Save vddio regulator state during probe || | |||
|- | |||
| Fix PCI breaks on suspend || | |||
|- | |||
| Add start up delay for remoteproc || | |||
|- | |||
| Cortex-M7: Fix hanging SDMA examples || | |||
|- | |||
| Change sn65dsi83 to built in || | |||
|- | |||
| '''Yocto updates''' || | |||
|- | |||
| '''meta-variscite-bsp updates''' || | |||
|- | |||
| freertos-variscite: Add 2.12.x support || | |||
|- | |||
| Configure op-tee memory to 4gb || | |||
|- | |||
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1/> | |||
<section begin=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''U-Boot updates''' || | |||
|- | |||
| Remove eth1_phy_rst_hog on Carriers || This makes the PHY reset delays consistent with the values declared in the device tree file | |||
|- | |||
| Fix eth0 fail on legacy dt8mcustomboard || | |||
|- | |||
| Add vddio-regulator for AR8033 PHY on Carriers || This fixes Ethernet over Carrier not working in U-Boot with atheros PHY. | |||
|- | |||
| '''Kernel updates''' || | |||
|- | |||
| Disable phy for eth1 on legacy dt8mcustomboard || | |||
|- | |||
| Drop using "snps,reset-gpio" for DART-MX8M-PLUS || | |||
|- | |||
| net: mdio: manage deassert time when controlling MDIO reset signal || | |||
|- | |||
| net: fec: manage corner deferred probe condition || | |||
|- | |||
| net: mdio: force deassert MDIO reset signal || | |||
|- | |||
| Drop enabling multiple queues on eqos || This fixes the eth0 issue when stressed with iperf3 tests | |||
|- | |||
| enable pull-up for the ethernet phy reset on the SOMs || | |||
|- | |||
| arm64: imx8_var_defconfig: change usb ehci and ohci drivers to loadable || | |||
|- | |||
| '''Yocto updates''' || | |||
|- | |||
| '''meta-variscite-bsp updates''' || | |||
|- | |||
| linux-firmware: bc43xx: add symbolic link to firmware for each model || | |||
|- | |||
| linux-firmware: bc43xx: add symbolic link to firmware for each machine || | |||
|- | |||
| Revert "variscite-wifi.service: Disable service stop" || | |||
|- | |||
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 10.54.0.13" || | |||
|- | |||
<section end=RN_mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2/> | |||
<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release||Based on FSLC Yocto Kirkstone and NXP Linux kernel [https://github.com/nxp-imx/linux-imx/commit/3313732e9984cb8a6b10a9085c7e18d58e770d56 5.15.71_2.2.0] | |||
|- | |||
! Known Issues !! | |||
|- | |||
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/d0da130db80df331610cac73405b049160bd3cd9 dnsmasq: enable dbus packageconfig] | |||
|- | |||
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0/> | |||
=== RN_mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1 === | |||
<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || Added Chromium with hardware accelerated graphics / GPU support | |||
|- | |||
| '''Kernel updates''' || | |||
|- | |||
| net: phy: adin: Add flag to allow enabling of 1000base-t retrain || | |||
|- | |||
| net: phy: adin: Add flags to allow disabling of fast link down || | |||
|- | |||
| '''Yocto updates''' || | |||
|- | |||
| '''meta-variscite-bsp updates''' || | |||
|- | |||
| conf: variscite: add variscite-mirrors for codeaurora || | |||
|- | |||
| conf: variscite: add variscite-mirrors for https || | |||
|- | |- | ||
| jailhouse: migrate source from codeaurora to github || | | jailhouse: migrate source from codeaurora to github || | ||
|- | |- | ||
| '''meta-variscite-sdk updates''' || | | '''meta-variscite-sdk updates''' || | ||
|- | |||
| fsl-image-gui-chromium: launch Chromium as non-root user to avoid warning || | |||
|- | |||
| fsl-image-gui-chromium, weston-init: add launcher for Chromium in weston.ini || | |||
|- | |||
| images: Add new fsl-image-gui-chromium image recipe || | |||
|- | |||
| var-mii: Introduce native recipe variant || | |||
|- | |||
| var-mii: introduce recipe || | |||
|- | |||
| var-create-yocto-sdcard.sh: add DEFAULT_IMAGE argument || | |||
|- | |||
| keyctl-caam: migrate source from codeaurora to github || | |||
|- | |||
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1/> | |||
<section begin=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
| '''Kernel updates''' || | |||
|- | |||
| devicetree: basler: Add support for dual camera on hardware supporting it || Dual MIPI-CSI channel is currently available only on DART-MX8M-PLUS due to hardware limitations of Symphony board with VAR-SOM-MX8M-PLUS | |||
|- | |||
<section end=RN_mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2/> | |||
<section begin=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release||Based on NXP Yocto Mickledore and NXP Linux kernel [https://github.com/nxp-imx/linux-imx/commit/66e442bc7fdcc935e6faa94c743f653263d4ed67 lf-6.1.y] | |||
|- | |||
! Known Issues !! | |||
|- | |||
| GPU memory allocation fail for 2GB or less SoMs || Fixed by [https://github.com/varigit/linux-imx/commit/a5ba39286647609407a08300699187127c56ed04 RND-2193: imx8mp-var-dart: Move gpu_reserved below 1GB] | |||
|- | |||
| Running "shutdown" from the command line reboots the board || Fixed by [https://github.com/varigit/imx-atf/commit/77a5654eb12f67bb3e677b7142ac6128b898d348 Revert "MA-20141 imx8m: enable alarm when shutdown"] | |||
|- | |||
<section end=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0/> | |||
<section begin=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
| '''Kernel updates''' || | |||
|- | |||
| devicetree: basler: Add support for dual camera on hardware supporting it || Dual MIPI-CSI channel is currently available only on DART-MX8M-PLUS due to hardware limitations of Symphony board with VAR-SOM-MX8M-PLUS | |||
|- | |||
<section end=RN_mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1/> | |||
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0 === | |||
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | |||
|- | |||
| Initial release||Based on NXP Yocto Mickledore and NXP Linux Kernel 6.1.36 [https://github.com/nxp-imx/linux-imx/commit/04b05c5527e9af8d81254638c307df07dc9a5dd3 lf-6.1.y] | |||
|- | |||
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0/> | |||
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1 === | |||
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || | |||
|- | |||
|<strong>Major Updates</strong> || | |||
|- | |||
| Add support for VAR-SOM-MX8M-PLUS V2.0|| See [https://variwiki.com/index.php?title=VAR-SOM-MX8M-PLUS_rev_changelog#VAR-SOM-MX8M-PLUS_V2.0 VAR-SOM-MX8M-PLUS changelog] for more information. | |||
|- | |||
| Drop support for DT8MCustomboard V1.x|| | |||
|- | |||
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=63183f4b534cc74a5c20cdfbd1ea844ee726986d|new_commit={{#var:U-BOOT_COMMIT}}}} | |||
|- | |||
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=f12b8d8c31d9f6c15fd2034efacaf77cbd3ed00b|new_commit={{#var:KERNEL_COMMIT}}}} | |||
|- | |||
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=09b06d082222b5178640e506d0bf5adf3efa2ba9|new_commit={{#var:META_VARISCITE_COMMIT}}}} | |||
|- | |||
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=1c3152af48bccec6be024a33e81c766725681489|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}} | |||
|- | |||
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=7df2efc2d90c54e5f360fdd6f17cbc582ff09c8d|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}} | |||
|- | |||
{{GIT_UPDATES|name=meta-variscite-sdk-common|git_http={{#var:META_VARISCITE_SDK_COMMON_HTTP}}|old_commit=a51b2157f9b38b6261c383f3da80e84e35b1a99f|new_commit={{#var:META_VARISCITE_SDK_COMMON_COMMIT}}}} | |||
|- | |||
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1/> | |||
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2 === | |||
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> || | |||
|- | |||
|<strong>Major Updates</strong> || | |||
|- | |||
| Additional patches to support VAR-SOM-MX8M-PLUS V2.0 || | |||
|- | |||
|<strong>Known Issues<strong> || | |||
|- | |||
| install_android.sh does not work on VAR-SOM-MX8M-PLUS v2.0 || Android 13.0.0_1.0.0 does not yet support VAR-SOM-MX8M-PLUS v2.0 and will hang early in boot without: https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644. | |||
|- | |||
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=837361a39bc87d1aae3e13dc92853cf1dbc2ed56|new_commit={{#var:U-BOOT_COMMIT}}}} | |||
|- | |||
| [https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644 imx8mp_var_dart: fix board_id detect for VAR-SOM-MX8M-PLUS 2.0] || | |||
|- | |||
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=7c99305a876839d2011015d61aba2658826c1857|new_commit={{#var:KERNEL_COMMIT}}}} | |||
|- | |||
| Several enhancements to OV5640 camera driver || See [https://github.com/varigit/linux-imx/compare/7c99305a876839d2011015d61aba2658826c1857...210b0daa8d34839aa4b3547d9c8dbaf6353d8771 7c99305a8...210b0daa8] | |||
|- | |||
| [https://github.com/varigit/linux-imx/commit/cc03d1cb7ba23d85a54af6f8c420852493312008 imx8mp-var-som: fix compile warnings ] || | |||
|- | |||
| [https://github.com/varigit/linux-imx/commit/35fcc48a4b5b844f4ab671a4a7b425a1f62170f5 imx8mp-var-som: fix pinctrl for 802.15.4] || | |||
|- | |||
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=c85341ddca37f85f722b52d98d789f0014c57e49|new_commit={{#var:META_VARISCITE_COMMIT}}}} | |||
|- | |||
| [https://github.com/varigit/meta-variscite-bsp-imx/commit/b023192397ba0bc1e4ff7c52647403b769b68ace iw612-utils: iw612-bt: imx8mp-var-som: wait for hci interface to come up ] || | |||
|- | |||
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=d2767459431ed22dcff652882fdc3bcec18d86b3|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}} | |||
|- | |||
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=64bc68ea16f283490a9a98a63500a4d366cb7416|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}} | |||
|- | |||
<section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2/> | |||
=== RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3 === | |||
<section begin=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/> | |||
|- | |||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> || | |||
|- | |||
|<strong>Major Updates</strong> || | |||
|- | |||
| Additional patches to support DART-MX8M-PLUS V2.0 || | |||
|- | |- | ||
| | | Relocate gpu_reserved memory to be within 1GB of RAM || | ||
|- | |- | ||
| | |<strong>Known Issues<strong> || | ||
|- | |- | ||
| | | install_android.sh does not work on VAR-SOM-MX8M-PLUS v2.0 || Android 13.0.0_1.0.0 does not yet support VAR-SOM-MX8M-PLUS v2.0 and will hang early in boot without: https://github.com/varigit/uboot-imx/commit/7cb218c229b62865d79a0a1f327a4f020dc35644. | ||
|- | |- | ||
| var- | {{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=7cb218c229b62865d79a0a1f327a4f020dc35644|new_commit={{#var:U-BOOT_COMMIT}}}} | ||
|- | |- | ||
| | | Add support for DART-MX8M-PLUS 2.0 || See [https://github.com/varigit/uboot-imx/compare/987f2c8c44da6afe5deaa25f8f760d743664a175...ca1dfc1574ad614f90f2cf3a120e950dabed848a 987f2c8c44da...ca1dfc1574ad] | ||
|- | |- | ||
| var | {{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=a6ba3adc78a578bfaf3bc005062077fd9e0e1b49|new_commit={{#var:KERNEL_COMMIT}}}} | ||
|- | |- | ||
| | | [https://github.com/varigit/linux-imx/commit/6ca9be825a866673719c18c45ceda7e22dcd23c3 imx8mp-var-dart: add support for DART-MX8M-PLUS 2.0] || | ||
|- | |- | ||
| [https://github.com/varigit/linux-imx/commit/e2625eeb11fd9df8f42ba4bba3aeb204dde9c728 imx8mp-var-som: fix pinctrl for 802.15.4] || | |||
|- | |- | ||
| | | [https://github.com/varigit/linux-imx/commit/f6ad7479b376784d62b7225e82729b01d6b8602e RND-2193: imx8mp-var-dart: Move gpu_reserved below 1GB] || | ||
|- | |- | ||
| | {{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=ffda6c84950fde890eaa53b00e8c3b53d1e1d99a|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}} | ||
| | |||
|- | |- | ||
| | {{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=7c9a2a00be89fa15679718a817c386c3f8e75dcf|new_commit={{#var:META_VARISCITE_COMMIT}}}} | ||
|- | |- | ||
| | | [https://github.com/varigit/meta-variscite-bsp-imx/commit/43ffbc389ecba5dd60b7188189c017ff9543b147 Add support for DART-MX8M-PLUS v2.0] || | ||
|- | |- | ||
| | {{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=cf44a79cc6099f5d69b918c80b21f4d52fa7c391|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}} | ||
|- | |- | ||
<section end=RN_mx8mp-yocto-mickledore-6.1. | <section end=RN_mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3/> | ||
=== RN_mx8mp-yocto- | === RN_mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0 === | ||
<section begin=RN_mx8mp-yocto- | <section begin=RN_mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/> | ||
|- | |- | ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | | <span {{#var:STYLE_RELEASE}}>Release 1.0</span> || | ||
|- | |- | ||
| Initial release||Based on NXP Yocto | | Initial release||Based on NXP Yocto Scarthgap and NXP Linux Kernel 6.6.23 [https://github.com/nxp-imx/linux-imx/commit/b586a521770e508d1d440ccb085c7696b9d6d387 lf-6.6.y] | ||
|- | |- | ||
| '''Known Issues''' || | |||
|- | |- | ||
| | | Problem using variscite-rproc-u-boot with versions earlier than v2.0: the Device Tree is set incorrectly, causing Wi-Fi and Bluetooth to fail. || To fix this, manually set the M7 Device Tree. | ||
|- | |- | ||
| | | Access point not working on Laird LWB5 chipset || The command to create virtual uap0 fails. | ||
|- | |- | ||
| | | 802.15.4 / Openthread is not working on IW612 chipset || | ||
|- | |- | ||
| | | meta-qt6 and meta-browser both provide gn-native, breaking the SDK generation for fsl-image-qt6 || To fix it add the line BBMASK += "/meta-browser/meta-chromium/recipes-browser/chromium/gn-native_.*\.bb" in the local.conf<br>Note: fsl-image-chromium will no longer build. | ||
|- | |- | ||
<section end=RN_mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0/> | |||
<section end=RN_mx8mp-yocto- | |||
<section end=RELEASE_NOTES/></includeonly> | <section end=RELEASE_NOTES/></includeonly> |
Revision as of 22:07, 20 November 2024
Common Variables
Common Before
Common After
Releases
zeus-fsl-5.4.47-mx8mp-v1.0
zeus-fsl-5.4.70-mx8mp-v1.0
zeus-fsl-5.4.70-mx8mp-v1.1
zeus-fsl-5.4.70-mx8mp-v1.2
zeus-fsl-5.4.70_2.3.2-mx8mp-v1.0
zeus-fsl-5.4.70_2.3.2-mx8mp-v1.1
gatesgarth-fsl-5.10.9_1.0.0-mx8mp-v1.0
hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.0
hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.1
hardknott-fsl-5.10.35_2.0.0-mx8mp-v1.2
hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.0
hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.1
hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.2
hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.3
mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.0
mx8mp-yocto-hardknott-5.10.72_2.2.1-v1.1
mx8mp-yocto-kirkstone-5.15-2.0.x-v1.0
mx8mp-yocto-kirkstone-5.15-2.0.x-v1.1
mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2
mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.0
mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.1
mx8mp-yocto-kirkstone-5.15.71_2.2.0-v1.2
mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.0
mx8mp-yocto-mickledore-6.1.22_2.0.0-v1.1
mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.0
mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.1
mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.2
mx8mp-yocto-mickledore-6.1.36_2.1.0-v1.3
mx8mp-yocto-scarthgap-6.6.23_2.0.0-v1.0