YPC VAR-SOM-MX8: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
 
(11 intermediate revisions by 4 users not shown)
Line 9: Line 9:
-->{{#vardefine:MACHINE_NAME_|imx8qm_var_som}} <!--
-->{{#vardefine:MACHINE_NAME_|imx8qm_var_som}} <!--
-->{{#vardefine:SOC|mx8qm}} <!--
-->{{#vardefine:SOC|mx8qm}} <!--
{{#lst:YPC_VAR-SOM-MX8|RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.0}}
-->{{#vardefine:SOC_SERIES|imx8}} <!--
-->{{#vardefine:SOC_SERIES|imx8}} <!--
-->{{#vardefine:SOC_FAMILY|imx8}} <!--
-->{{#vardefine:SOC_FAMILY|imx8}} <!--
Line 1,885: Line 1,886:
-->{{#vardefine:KERNEL_COMMIT|0032902164c542a601a18c5dc49d77a63ebedfdb}} <!---
-->{{#vardefine:KERNEL_COMMIT|0032902164c542a601a18c5dc49d77a63ebedfdb}} <!---
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_REPO_NAME|linux-imx}} <!--
-->{{#vardefine:KERNEL_RECIPE_VER|6.1.22}} <!--
-->{{#vardefine:KERNEL_RECIPE_VER|6.1}} <!--
-->{{#vardefine:KERNEL_VER|6.1.22}} <!--
-->{{#vardefine:KERNEL_VER|6.1.22}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
-->{{#vardefine:KERNEL_GIT|https://github.com/varigit/{{#var:KERNEL_REPO_NAME}}.git}} <!--
Line 1,907: Line 1,908:
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/imx8qm_var_som.h}} <!--
-->{{#vardefine:UBOOT_CONFIG_FILE|include/configs/imx8qm_var_som.h}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|imx8qm_var_som}} <!--
-->{{#vardefine:U-BOOT_BOARD_NAME|imx8qm_var_som}} <!--
-->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot-sd.bin}} <!--
-->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8qm_var_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_DEFCONFIG|imx8qm_var_som_defconfig}} <!--
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|N/A}} <!--
-->{{#vardefine:U-BOOT_SD_SECURE_BOOT_DEFCONFIG|N/A}} <!--
-->{{#vardefine:U-BOOT_OFFSET|32}} <!--
-->{{#vardefine:U-BOOT_OFFSET|32}} <!--
Line 1,973: Line 1,974:
}}<section end=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/>
}}<section end=mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/>


<includeonly><section begin=RELEASE_NOTES/><!----------------- RELEASE NOTES SECTION -------------------->
=== mx8-yocto-mickledore-6.1.36_2.1.0-v1.0 ===
<section begin=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
    RELEASE (NXP)
-->{{#vardefine:FSL_BSP_VERSION|L6.1.36_2.1.0}} <!--
 
    RELEASE (Variscite)
-->{{#vardefine:RELEASE_DATE|01/25/2024}} <!--
-->{{#vardefine:RELEASE_NAME|mx8-yocto-mickledore-6.1.36_2.1.0-v1.0}} <!--
-->{{#vardefine:RECOVERY_BASE_NAME|mx8__yocto-mickledore-6.1.36_2.1.0-v1.0__android-13.0.0_1.2.0-v1.0}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!--
-->{{#vardefine:RECOVERY_SD_SHA256|ab636aa1673ca205260874da1de8582b4969e3cdf9b288ecf405169204b498ad}} <!--
-->{{#vardefine:YOCTO_MANIFEST|imx-6.1.36-2.1.0.xml}} <!--


=== RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0 ===
    Kernel (Variscite)
<section begin=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/>
-->{{#vardefine:KERNEL_BRANCH|lf-6.1.y_var03}} <!--
|-
-->{{#vardefine:KERNEL_COMMIT|e84a0335cc9faefe5bb6cee45a5c4e20a564a590}} <!---
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
-->{{#vardefine:KERNEL_RECIPE_VER|6.1}} <!--
|-
-->{{#vardefine:KERNEL_VER|6.1.36}} <!--
| Initial Yocto Hardknott release based on NXP lf-5.10.72_2.2.1 || (kernel 5.10.72)
|-
! Known Issues !!
|-
| RPMSG Demos from U-Boot || Starting from BSP 5.10.72 NXP stopped supporting Cortex-m firmwares loaded from U-Boot
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|-
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
<section end=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/>


=== RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1 ===
    U-Boot
<section begin=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/>
-->{{#vardefine:U-BOOT_IMAGE_NAME|imx-boot}} <!--
|-
-->{{#vardefine:U-BOOT_SD_IMAGE_NAME|imx-boot-sd.bin}} <!--
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
-->{{#vardefine:U-BOOT_BRANCH|lf_v2023.04_var02}} <!--
-->{{#vardefine:U-BOOT_COMMIT|ee10aa4b599677e51e6ce1b7d4f101535511e826}} <!--
 
    Firmwares
-->{{#vardefine:NXP_IMX_BRANCH|lf-6.1.36_2.1.0}} <!--
-->{{#vardefine:NXP_FIRMWARE|firmware-imx-8.21}} <!--
-->{{#vardefine:VARISCITE_ATF_BRANCH|lf_v2.8_var02}} <!--
 
    meta-variscite:
-->{{VARDEFINE_GIT
  |NAME=META_VARISCITE|REPO=meta-variscite-bsp-imx|GIT=https://github.com/varigit|
  |BRANCH=mickledore-var02|COMMIT=9063b8052560969f21854762b768239faf31f45e
}}<!--
-->{{VARDEFINE_GIT
  |NAME=META_VARISCITE_BSP_COMMON|REPO=meta-variscite-bsp-common|GIT=https://github.com/varigit|
  |BRANCH=mickledore-var02|COMMIT=d027bbb57dde58ed5ebcb74906eb29b5deeb5604
}}<!--
-->{{VARDEFINE_GIT
  |NAME=META_VARISCITE_SDK_COMMON|REPO=meta-variscite-sdk-common|GIT=https://github.com/varigit|
  |BRANCH=mickledore-var02|COMMIT=5dd4f0f7f8bbc255cec959ad19402881e229b197
}}<!--
-->{{VARDEFINE_GIT
  |NAME=META_VARISCITE_SDK|REPO=meta-variscite-sdk-imx|GIT=https://github.com/varigit|
  |BRANCH=mickledore-var02|COMMIT=6fd2f0ac54c8d552e382ad1e175f330fd40e54cd
}}<section end=mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/>
 
=== mx8-yocto-mickledore-6.1.36_2.1.0-v1.1 ===
<section begin=mx8-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
    RELEASE
-->{{#vardefine:RELEASE_DATE|11/12/2024}} <!--
-->{{#vardefine:RELEASE_NAME|mx8-yocto-mickledore-6.1.36_2.1.0-v1.1}} <!--
-->{{#vardefine:RECOVERY_BASE_NAME|mx8__yocto-mickledore-6.1.36_2.1.0-v1.1__android-13.0.0_1.2.0-v1.0}} <!--
-->{{#vardefine:RECOVERY_SD_NAME|{{#var:RECOVERY_BASE_NAME}}.wic.zst}} <!--
-->{{#vardefine:RECOVERY_SD_SHA256|bb6c4e96bf94645fe975089fb016a2699fe437fd1250de2eb99f2e18c7c66544}} <!--
 
    U-Boot
-->{{#vardefine:U-BOOT_COMMIT|94f42a453391f8dc86116fd2ce6d44cb9598677e}} <!--
 
    Kernel
-->{{#vardefine:KERNEL_COMMIT|f69b3d4982b01336e3fcbc577b69cbeee1afc2ff}} <!---
 
    meta-variscite:
-->{{VARDEFINE_GIT
  |NAME=META_VARISCITE|REPO=meta-variscite-bsp-imx|GIT=https://github.com/varigit|
  |BRANCH=mickledore-var02|COMMIT=830095eb527fdbeb5a0a22464b92481163b64752
}}<!--
-->{{VARDEFINE_GIT
  |NAME=META_VARISCITE_BSP_COMMON|REPO=meta-variscite-bsp-common|GIT=https://github.com/varigit|
  |BRANCH=mickledore-var02|COMMIT=5d9128d134a3ab15a4ff97657e498b940467f814
}}<!--
-->{{VARDEFINE_GIT
  |NAME=META_VARISCITE_SDK|REPO=meta-variscite-sdk-imx|GIT=https://github.com/varigit|
  |BRANCH=mickledore-var02|COMMIT=a8a52190eedec7787ddececf827cb6b6707ff034
}}<section end=mx8-yocto-mickledore-6.1.36_2.1.0-v1.1/>
 
<includeonly><section begin=RELEASE_NOTES/><!----------------- RELEASE NOTES SECTION -------------------->
 
=== RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0 ===
<section begin=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Hardknott release based on NXP lf-5.10.72_2.2.1 || (kernel 5.10.72)
|-
! Known Issues !!
|-
| RPMSG Demos from U-Boot || Starting from BSP 5.10.72 NXP stopped supporting Cortex-m firmwares loaded from U-Boot
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|-
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
<section end=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.0/>
 
=== RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1 ===
<section begin=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| U-Boot: fec2: aligned to fec1 for consistency ||
|-
| U-Boot: fec1: tune phy-reset-post-delay with proper value ||
|-
| U-Boot: ethphy1: remove no need rx-internal-delay-ps property ||
|-
| Linux: ethphy1: remove no need rx-internal-delay-ps property ||
|-
| Linux: ptn5150: use interrupts instead of deprecated int-gpio ||
|-
| Linux: extcon: ptn5150: Add irq-is-id-quirk ||
|-
| Linux: imx-lpi2c: change log level for eDMA related logs ||
|-
| Linux: ptn5150: enable irq-is-id-quirk || irq-is-id-quirk allows the id pin to be used as an interrupt to avoid using a separate device tree file for Symphony <= 1.4.
|-
| meta-layer: libubootenv: link with bfd instead of gold ||
|-
| meta-layer: linux-variscite: Remove KERNEL_CONFIG_COMMAND ||
<section end=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/>
 
<section begin=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0/>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Kirkstone release||Based on [https://github.com/Freescale/linux-fslc/commit/d818413e4d7901cb8a00a631a389326e2c93ae41 FSLC 5.15-2.0.x-imx] (kernel 5.15.60) which is based on [https://github.com/nxp-imx/linux-imx/commits/lf-5.15.32-2.0.0 NXP lf-5.15.32-2.0.0] and merged with [https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=v5.15.60 Linux Stable 5.15.60]
|-
! Known Issues !!
|-
| RPMSG Demos from U-Boot || Starting from BSP 5.10.72 NXP stopped supporting Cortex-m firmwares loaded from U-Boot
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|-
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
|-
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/ee1c511b1640a641a840aa48e313dd4d7e9652fa dnsmasq: enable dbus packageconfig]
|-
<section end=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0/>
 
<section begin=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1/>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || Added Chromium with hardware accelerated graphics / GPU support
|-
| '''Yocto updates''' ||
|-
| '''meta-variscite-bsp updates''' ||
|-
| conf: variscite: add variscite-mirrors for codeaurora ||
|-
| conf: variscite: add variscite-mirrors for https ||
|-
| jailhouse: migrate source from codeaurora to github ||
|-
| '''meta-variscite-sdk updates''' ||
|-
| fsl-image-gui-chromium, weston-init: add launcher for Chromium in weston.ini ||
|-
| images: Add new fsl-image-gui-chromium image recipe ||
|-
|-
| U-Boot: fec2: aligned to fec1 for consistency ||
| var-mii: introduce recipe ||
|-
|-
| U-Boot: fec1: tune phy-reset-post-delay with proper value ||
<section end=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1/>
 
<section begin=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.2/>
|-
|-
| U-Boot: ethphy1: remove no need rx-internal-delay-ps property ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| Linux: ethphy1: remove no need rx-internal-delay-ps property ||
| '''Yocto updates''' ||
|-
|-
| Linux: ptn5150: use interrupts instead of deprecated int-gpio ||
| '''meta-variscite-bsp updates''' ||
|-
|-
| Linux: extcon: ptn5150: Add irq-is-id-quirk ||
| kernel: various updates and fixes ||
|-
|-
| Linux: imx-lpi2c: change log level for eDMA related logs ||
| '''meta-variscite-sdk updates''' ||
|-
|-
| Linux: ptn5150: enable irq-is-id-quirk || irq-is-id-quirk allows the id pin to be used as an interrupt to avoid using a separate device tree file for Symphony <= 1.4.
| fsl-image-gui-chromium: launch Chromium as non-root user to avoid warning ||
|-
|-
| meta-layer: libubootenv: link with bfd instead of gold ||
<section end=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.2/>
 
=== RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0 ===
<section begin=RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/>
|-
|-
| meta-layer: linux-variscite: Remove KERNEL_CONFIG_COMMAND ||
<section end=RN_mx8-yocto-hardknott-5.10.72_2.2.1-v1.1/>
<section begin=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0/>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Initial Yocto Kirkstone release||Based on [https://github.com/Freescale/linux-fslc/commit/d818413e4d7901cb8a00a631a389326e2c93ae41 FSLC 5.15-2.0.x-imx] (kernel 5.15.60) which is based on [https://github.com/nxp-imx/linux-imx/commits/lf-5.15.32-2.0.0 NXP lf-5.15.32-2.0.0] and merged with [https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=v5.15.60 Linux Stable 5.15.60]
| Initial release||Based on NXP Yocto Mickledore and NXP Linux Kernel [https://github.com/nxp-imx/linux-imx/commit/66e442bc7fdcc935e6faa94c743f653263d4ed67 lf-6.1.y]
|-
|-
! Known Issues !!
! Known Issues !!
|-
|-
| RPMSG Demos from U-Boot || Starting from BSP 5.10.72 NXP stopped supporting Cortex-m firmwares loaded from U-Boot
| PCIe not working || Fixed by https://github.com/varigit/linux-imx/commit/3db919ef6c53ec5c44d196cb618c4b6f675bec82
|-
| RPMSG Demos from U-Boot || Starting from BSP 5.10.72 NXP stopped supporting Cortex-M firmwares loaded from U-Boot
|-
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
Line 2,034: Line 2,175:
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
|-
|-
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS || Fixed by [https://github.com/varigit/meta-variscite-bsp-imx/commit/ee1c511b1640a641a840aa48e313dd4d7e9652fa dnsmasq: enable dbus packageconfig]
<section end=RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/>
|-
<section end=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.0/>


<section begin=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1/>
=== RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.0 ===
<section begin=RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> || Added Chromium with hardware accelerated graphics / GPU support
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| '''Yocto updates''' ||
| Initial release||Based on NXP Yocto Mickledore and NXP Linux Kernel 6.1.36 [https://github.com/nxp-imx/linux-imx/commit/04b05c5527e9af8d81254638c307df07dc9a5dd3 lf-6.1.y]
|-
|-
| '''meta-variscite-bsp updates''' ||
! Known Issues !!
|-
|-
| conf: variscite: add variscite-mirrors for codeaurora ||
| PCIe not working on imx8qm-var-som || Fixed by https://github.com/varigit/linux-imx/commit/dd01990ad5ea4058e142be0d8a2fe02f46e2a1ae
|-
|-
| conf: variscite: add variscite-mirrors for https ||
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|-
|-
| jailhouse: migrate source from codeaurora to github ||
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
|-
| '''meta-variscite-sdk updates''' ||
|-
| fsl-image-gui-chromium, weston-init: add launcher for Chromium in weston.ini ||
|-
| images: Add new fsl-image-gui-chromium image recipe ||
|-
| var-mii: introduce recipe ||
|-
|-
<section end=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.1/>
<section end=RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.0/>


<section begin=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.2/>
=== RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.1 ===
<section begin=RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.1/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
|-
| '''meta-variscite-bsp updates''' ||
|<strong>Major Updates</strong> ||
|-
|-
| kernel: various updates and fixes ||
| Fix support for PCIe on imx8qm-var-som ||
|-
|-
| '''meta-variscite-sdk updates''' ||
{{GIT_UPDATES|name=uboot-imx|git_http={{#var:U-BOOT_GIT_HTTP}}|old_commit=ee10aa4b599677e51e6ce1b7d4f101535511e826|new_commit={{#var:U-BOOT_COMMIT}}}}
|-
|-
| fsl-image-gui-chromium: launch Chromium as non-root user to avoid warning ||
{{GIT_UPDATES|name=linux-imx|git_http={{#var:KERNEL_GIT_HTTP}}|old_commit=e84a0335cc9faefe5bb6cee45a5c4e20a564a590|new_commit={{#var:KERNEL_COMMIT}}}}
|-
|-
<section end=RN_mx8-yocto-kirkstone-5.15-2.0.x-v1.2/>
{{GIT_UPDATES|name=meta-variscite-bsp-imx|git_http={{#var:META_VARISCITE_HTTP}}|old_commit=9063b8052560969f21854762b768239faf31f45e|new_commit={{#var:META_VARISCITE_COMMIT}}}}
 
=== RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0 ===
<section begin=RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
{{GIT_UPDATES|name=meta-variscite-bsp-common|git_http={{#var:META_VARISCITE_BSP_COMMON_HTTP}}|old_commit=d027bbb57dde58ed5ebcb74906eb29b5deeb5604|new_commit={{#var:META_VARISCITE_BSP_COMMON_COMMIT}}}}
|-
|-
| Initial release||Based on NXP Yocto Mickledore and NXP Linux Kernel [https://github.com/nxp-imx/linux-imx/commit/66e442bc7fdcc935e6faa94c743f653263d4ed67 lf-6.1.y]
{{GIT_UPDATES|name=meta-variscite-sdk-imx|git_http={{#var:META_VARISCITE_SDK_HTTP}}|old_commit=6fd2f0ac54c8d552e382ad1e175f330fd40e54cd|new_commit={{#var:META_VARISCITE_SDK_COMMIT}}}}
|-
|-
! Known Issues !!
! Known Issues !!
|-
|-
| RPMSG Demos from U-Boot || Starting from BSP 5.10.72 NXP stopped supporting Cortex-M firmwares loaded from U-Boot
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
|-
| HDMI and DP suspend/resume crash || Using HDMI or DP display, resume from suspend ends up in a kernel crash
|-
|-
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 || U-Boot USB driver does not recognize USB devices behind the hub
|-
|-
| USB Type-A ports don't work after resume from suspend in Linux on SPEAR-MX8 || USB driver does not recognize USB devices behind the hub
<section end=RN_mx8-yocto-mickledore-6.1.36_2.1.0-v1.1/>
|-
<section end=RN_mx8-yocto-mickledore-6.1.22_2.0.0-v1.0/>
<section end=RELEASE_NOTES/></includeonly><!----------------- END RELEASE NOTES SECTION -------------------->
<section end=RELEASE_NOTES/></includeonly><!----------------- END RELEASE NOTES SECTION -------------------->

Latest revision as of 20:07, 12 November 2024

Common Variables

Common Before


Common After


sumo-fsl-4.14.98-mx8-v1.1


sumo-fsl-4.14.98-mx8-v1.2


sumo-fsl-4.14.98-mx8-v1.3


sumo-fsl-4.14.98-mx8-v1.4


sumo-fsl-4.14.98-mx8-v1.5


sumo-fsl-4.14.98-mx8-v1.6


sumo-fsl-4.14.98-mx8-v1.7


sumo-fsl-4.14.98-mx8-v1.8


sumo-fsl-4.14.98-mx8-v1.9


zeus-fsl-5.4.3-mx8-v1.0


zeus-fsl-5.4.3-mx8-v1.1


zeus-fsl-5.4.3-mx8-v1.2


dunfell-fslc-5.4-2.1.x-mx8-v1.0


dunfell-fslc-5.4-2.1.x-mx8-v1.1


dunfell-fslc-5.4-2.1.x-mx8-v1.2


dunfell-fslc-5.4-2.1.x-mx8-v1.3


dunfell-fslc-5.4-2.1.x-mx8-v1.4


dunfell-fslc-5.4-2.1.x-mx8-v1.5


mx8-yocto-hardknott-5.10.72_2.2.1-v1.0


mx8-yocto-hardknott-5.10.72_2.2.1-v1.1


mx8-yocto-kirkstone-5.15-2.0.x-v1.0


mx8-yocto-kirkstone-5.15-2.0.x-v1.1


mx8-yocto-kirkstone-5.15-2.0.x-v1.2


mx8-yocto-mickledore-6.1.22_2.0.0-v1.0


mx8-yocto-mickledore-6.1.36_2.1.0-v1.0


mx8-yocto-mickledore-6.1.36_2.1.0-v1.1


Retrieved from "https://variwiki.com/index.php?title=YPC_VAR-SOM-MX8&oldid=27483"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 12 November 2024, at 20:07.

© 2024 Variscite. All rights reserved