DART-MX8M-MINI Release Notes: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
 
(69 intermediate revisions by 12 users not shown)
Line 126: Line 126:
| Upgraded to NXP BSP release 4.19.35_1.1.0
| Upgraded to NXP BSP release 4.19.35_1.1.0
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
--><section begin=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><!--
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI}}
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><!--


--><section begin=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| '''U-Boot''' ||
| '''meta-variscite-boot2qt''' ||
|-
|-
| imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY ||
| Update to Qt 6.0.4 ||
|-
|-
| variscite: imx8_eeprom: drop VAR_EEPROM_F_LVDS and cleanup indentation ||
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools ||
|-
|-
| variscite: imx8_eeprom: align eeprom features to SoM families  ||
| manifest: meta-variscite-fslc: Update to latest ||
|-
|-
| imx8: ahab: Only compile ahab.c for u-boot ||
| '''U-Boot''' ||
|-
|-
| ahab: Make authenticate_os_container static ||
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
|-
|-
| imx8mn-var-som: Move CONFIG_CSF_SIZE to imx8mn_var_som_defconfig ||
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot ||
|-
|-
| fastboot: Move USE_EMMC_BOOT_PART from Android Verified Boot ||
| imx8mm_var_dart: Set console environment variable in the default environment ||
|-
| '''Linux''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| imx8_var_defconfig: enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''meta-variscite-boot2qt''' ||
|-
| Update to Qt 6.0.4 ||
|-
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools ||
|-
| manifest: meta-variscite-fslc: Update to latest ||
|-
| '''U-Boot''' ||
|-
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
|-
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot ||
|-
| imx8mm_var_dart: Set console environment variable in the default environment ||
|-
|-
| '''Linux''' ||
| '''Linux''' ||
Line 213: Line 226:
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><!--


--><section begin=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| '''meta-variscite-boot2qt''' ||
| First Release
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Update to Qt 6.0.4 ||
! Change List
|-
|-
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
|-
|-
| manifest: meta-variscite-fslc: Update to latest ||
| Correct ldo1/ldo2 voltage on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
|-
|-
| '''U-Boot''' ||
| MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group
|-
|-
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
| bcm43xx-utils: Do not start WiFi if not available
|-
|-
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot ||
| Updated Qt version to 5.12.9 RC
|-
|-
| imx8mm_var_dart: Set console environment variable in the default environment ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|-
| '''Linux''' ||
| Removed B2Qt MediaPlayer demo
|-
|-
| Upgraded to version 5.4.142 ||
| Added M4 device trees for VAR-SOM-MX8M-MINI
|-
|-
| imx8_var_defconfig: add full docker support ||
| Added support for VAR-SOM-MX8M-MINI Rev1.1
|-
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
| First Release
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_SUMO_B2QT_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
! Change List
|-
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
| Removed B2Qt MediaPlayer demo
|-
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
| Added M4 device trees for VAR-SOM-MX8M-MINI
|-
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
| Added support for VAR-SOM-MX8M-MINI Rev1.1
|-
|-
| Revert "gpio: pca953x: Disable PM routines" ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| ARM: configs: Variscite: Enable USB_HSIC_USB3053 ||
| First Release
|-
| ARM: configs: Variscite: disable EVBUG module ||
|-
| ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs ||
|-
| ASoC: wm8904: add DMIC support ||
|-
| ASoC: wm8904: extend device tree support ||
|-
| Revert "ASoC: wm8904: add DMIC support and allow enabling it" ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| First B2Qt Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_SUMO_B2QT_V1.1_DART-MX8M-MINI/><!--


--><section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 289: Line 300:
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_P9.0.0_2.0.0_GA_DART-MX8M-MINI/><includeonly>  
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List
! Change List !! Description
|-
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
| <span {{#var:STYLE_RELEASE}}>Release 3.2</span> ||
|-
|-  
| Correct ldo1/ldo2 voltage on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
| Correct ldo1/ldo2 voltage on DART-MX8M-MINI and VAR-SOM-MX8M-MINI || Based on MLK-23275-1 by NXP  
|-
|-  
| MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group
| MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group ||
|-
|-  
| bcm43xx-utils: Do not start WiFi if not available
| Added MTP/PTP support || (The current ptn5150 driver does not support role management)
|-
|-  
| Updated Qt version to 5.12.9 RC
| <span {{#var:STYLE_RELEASE}}>Release 2.4</span> ||  
|-
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| Added support for VAR-SOM-MX8M-MINI 1.1 SOM ||
|-
|-
| Removed B2Qt MediaPlayer demo
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||
|-
|-  
| Added M4 device trees for VAR-SOM-MX8M-MINI
| Added support for VAR-SOM-MX8M-MINI ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI Rev1.1
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| Upgrade to Pie 9.0.0 v2.0.0 (kernel 4.14.98) ||
|-
|-  
| First Release
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|}
|-
{{#vardefine:CHANGE_LOG_FOUND|true}}
| Added CAN and I2C tools ||
</includeonly><section end=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/><!--
|-
 
| Fixed USB keys support ||
--><section begin=RELEASE_SUMO_B2QT_V1.1_DART-MX8M-MINI/><includeonly>
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Fixed the CPU operation points table ||
|-
| Added CPU speed grading fuse check ||
|-
| Added support for Microchip CAN FD ||
|-
| Added BLE advertising support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Added support for new board revisions ||
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Pie 9.0.0 v1.0.0 (kernel 4.14.78) for DART-MX8M-MINI ||
|}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
</includeonly><section end=RELEASE_P9.0.0_2.0.0_GA_DART-MX8M-MINI/><!--  
 
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.5/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
|-
| Removed B2Qt MediaPlayer demo
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| Added M4 device trees for VAR-SOM-MX8M-MINI
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI Rev1.1
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
|-
| First Release
| Fix occasional WiFi crash during bootup ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_SUMO_B2QT_V1.1_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
|-
|-
| First Release
| Kernel: Update Bluetooth firmware file name to BCM43430A1.hcd ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_P9.0.0_2.0.0_GA_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 3.2</span> ||  
| imx-atf: Fixed the derate enable conflict issue ||
|-  
|-
| Correct ldo1/ldo2 voltage on DART-MX8M-MINI and VAR-SOM-MX8M-MINI || Based on MLK-23275-1 by NXP  
| U-Boot: Fix m4 binary loading when using the TCM ||
|-  
|-
| MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group ||  
| Kernel: Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
|-  
|-
| Added MTP/PTP support || (The current ptn5150 driver does not support role management)  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
|-  
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.4</span> ||  
| '''Android:''' ||
|-  
|-
| Added support for VAR-SOM-MX8M-MINI 1.1 SOM ||  
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
|-  
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||  
| Switched Android UI dpi to 160dpi ||
|-  
|-
| Added support for VAR-SOM-MX8M-MINI ||  
| Added a new boot animation ||
|-  
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||  
| Framework auto focus support ||
|-  
|-
| Upgrade to Pie 9.0.0 v2.0.0 (kernel 4.14.98) ||  
| '''U-Boot:''' ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| SPL: Disabled SD card detect pin ||
|-  
|-
| Added CAN and I2C tools ||
| '''Kernel:''' ||
|-  
|-
| Fixed USB keys support ||
| OV5640 camera auto focus support ||
|-
| Fixed missing SD reset pinmux definition for SOM rev. 1.0 ||
|-
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||  
|-
| drm/bridge: nwl-dsi: allow using legacy pll settings||
|-
| Added Cortex-M4 related device trees ||
|-
| sound: pcm_memory: export snd_pcm_lib_preallocate_free ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.5/><!--
 
--><section begin=RELEASE_BUSTER_V2.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release v2.1</span> ||  
|-  
|-  
| Fixed the CPU operation points table ||  
| '''U-Boot updates:''' ||  
|-  
|-  
| Added CPU speed grading fuse check ||  
| Fixed m4 binary loading when using the TCM ||  
|-  
|-  
| Added support for Microchip CAN FD ||  
| SPL: Disabled SD card detect pin ||  
|-  
|-  
| Added BLE advertising support ||  
| Linux kernel updates: ||
|-
| Corrected ldo1/ldo2 voltage for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || Based on MLK-23275-1 by NXP
|-
| '''Debian build updates:''' ||
|-
| '''Debian 10.5 update: fix broken dependencies that removes imx-gpu-sdk packages''' ||  
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||  
| Fixed openssh-server dependencies for Debian 10.5 ||  
|-  
|-  
| Added support for new board revisions ||  
| Added loop device support to the build script ||  
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release v2.0</span> ||  
|-  
|-  
| Pie 9.0.0 v1.0.0 (kernel 4.14.78) for DART-MX8M-MINI ||  
| Initial Debian Buster release based on 4.19.35 ||  
|}  
|}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
</includeonly><section end=RELEASE_P9.0.0_2.0.0_GA_DART-MX8M-MINI/><!--  
</includeonly><section end=RELEASE_BUSTER_V2.1_DART-MX8M-MINI/><!--  


--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.5/><includeonly>
--><section begin=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 3.0</span> ||
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
| '''U-Boot updates:''' ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| Update to latest 2019.04_4.19.35_1.1.0 branch ||  
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
| '''Linux kernel updates:''' ||  
|-
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
| Update to latest kernel 4.19.35_1.1.0 branch ||  
|-
|-
| Fix occasional WiFi crash during bootup ||
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| '''Debian Build updates:''' ||  
|-
|-
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
| Align mx8_install_debian.sh to lastest mx8_install_yocto.sh ||  
|-
|-
| Kernel: Update Bluetooth firmware file name to BCM43430A1.hcd ||
| Rename imx8m-var-dart machine to imx8mq-var-dart ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| Multimedia gstreamer packages updated to 1.16 version ||  
|-
|-
| imx-atf: Fixed the derate enable conflict issue ||  
| GPU SDK support ||  
|-
|-
| U-Boot: Fix m4 binary loading when using the TCM ||  
| WiFi and BT firmware update to latest release 7.0.0.142 ||  
|-
|-
| Kernel: Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
| Power management updates ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
| Building imx-atf from source code ||  
|-
|-
| '''Android:''' ||
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||  
|-
|-
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
| '''U-Boot updates:''' ||  
|-
|-
| Switched Android UI dpi to 160dpi ||
| MLK-20966 TMU: Fix for temperature out of range ||  
|-
|-
| Added a new boot animation ||
| Bug fixes for cma allocation ||
|-
| '''Linux kernel updates:''' ||  
|-
|-
| Framework auto focus support ||
| MLK-23305 Fix the incorrect voltage scaling ||  
|-
|-
| '''U-Boot:''' ||
| Move M4 reserved RAM at 0x7e000000 ||  
|-
|-
| SPL: Disabled SD card detect pin ||
| Move rpmsg area at 0x40000000 ||  
|-
|-
| '''Kernel:''' ||
| '''Debian Build updates:''' ||  
|-
|-
| OV5640 camera auto focus support ||  
| Rename debian-emmc.sh -> install_debian.sh  ||  
|-
|-
| Fixed missing SD reset pinmux definition for SOM rev. 1.0 ||  
| Fix missing cb12 dtb installation for carrier board revisions ||  
|-
|-
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||  
| Update blacklist.conf for eMMC/fec modules ||  
|-
|-
| drm/bridge: nwl-dsi: allow using legacy pll settings||
| WiFi qemu-arm64 usleep fix to support usleep command on rootfs ||  
|-
|-
| Added Cortex-M4 related device trees ||
| Update default qemu-arm64 to 4.1.1 to fix openssh-server installation ||  
|-
|-
| sound: pcm_memory: export snd_pcm_lib_preallocate_free ||
| Use proper fw_utils and machine specific fw_env.config files ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Restructure build script to support unified 32bit vs 64 bit compilation ||  
|-
|-
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
| <span {{#var:STYLE_RELEASE}}>Release 2.2</span> ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|-
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.5/><!--
| Linux kernel: Added Docker support ||
 
|-
--><section begin=RELEASE_BUSTER_V2.1_DART-MX8M-MINI/><includeonly>
| U-Boot: Added flexibility to mmc part selection ||
{| class="wikitable"
|-
| Added rng-tools ||
|-
| Disabled the hostapd service by default (as wpa_supplicant is enabled) ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
|-
|-
! Change List !! Description
| Use legacy iptables by default ||  
|-
| <span {{#var:STYLE_RELEASE}}>Release v2.1</span> ||
|-
| '''U-Boot updates:''' ||
|-
| Fixed m4 binary loading when using the TCM ||
|-
| SPL: Disabled SD card detect pin ||
|-
| Linux kernel updates: ||
|-
| Corrected ldo1/ldo2 voltage for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || Based on MLK-23275-1 by NXP
|-
| '''Debian build updates:''' ||
|-
| '''Debian 10.5 update: fix broken dependencies that removes imx-gpu-sdk packages''' ||
|-
| Fixed openssh-server dependencies for Debian 10.5 ||
|-
| Added loop device support to the build script ||
|-
| <span {{#var:STYLE_RELEASE}}>Release v2.0</span> ||
|-
| Initial Debian Buster release based on 4.19.35 ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_BUSTER_V2.1_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| Bluetooth audio support ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 3.0</span> ||
| Automount media support ||  
|-
|-
| '''U-Boot updates:''' ||  
| Power management fixes ||  
|-
|-
| Update to latest 2019.04_4.19.35_1.1.0 branch ||  
| Multimedia fixes ||  
|-
|-
| '''Linux kernel updates:''' ||  
| CAN FD support ||  
|-
|-
| Update to latest kernel 4.19.35_1.1.0 branch ||  
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||  
|-
|-
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
| Initial Debian Buster release ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!--
 
 
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><includeonly>
{| class="wikitable"
|-
|-
| '''Debian Build updates:''' ||
! Change List !! Description
|-
|-
| Align mx8_install_debian.sh to lastest mx8_install_yocto.sh ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| Rename imx8m-var-dart machine to imx8mq-var-dart ||  
| '''U-Boot updates''' ||
|-
|-
| Multimedia gstreamer packages updated to 1.16 version ||  
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
|-
|-
| GPU SDK support ||  
| '''Linux kernel updates''' ||
|-
|-
| WiFi and BT firmware update to latest release 7.0.0.142 ||  
| Updated to version 5.4.142 || Merge remote-tracking branch 'fslc/5.4-2.1.x-imx' into 5.4-2.1.x-imx_var01
|-
|-
| Power management updates ||  
| imx8_var_defconfig: add full docker support ||
|-
|-
| Building imx-atf from source code ||  
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||  
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
|-
| '''U-Boot updates:''' ||  
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
|-
| MLK-20966 TMU: Fix for temperature out of range ||  
| Revert "Revert "gpio: pca953x: Disable PM routines"" ||
|-
|-
| Bug fixes for cma allocation ||  
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
|-
| '''Linux kernel updates:''' ||  
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
|-
| MLK-23305 Fix the incorrect voltage scaling ||  
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
|-
| Move M4 reserved RAM at 0x7e000000 ||  
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
|-
| Move rpmsg area at 0x40000000 ||  
| '''Debian updates:''' ||
|-
|-
| '''Debian Build updates:''' ||  
| pulesaudio: Fix pulseaudio system-wide mode ||
|-
|-
| Rename debian-emmc.sh -> install_debian.sh  ||  
| systemd: set HandlePowerKey to ignore ||
|-
|-
| Fix missing cb12 dtb installation for carrier board revisions ||  
| freertos-variscite: Add initial support for imx8mm ||
|-
|-
| Update blacklist.conf for eMMC/fec modules ||  
| deb: Add bluez-alsa 3.0.0 aligned to Dunfell release ||
|-
|-
| WiFi qemu-arm64 usleep fix to support usleep command on rootfs ||  
| bluez-alsa: ported bluez-alsa support from yocto-dunfell ||
|-
|-
| Update default qemu-arm64 to 4.1.1 to fix openssh-server installation ||  
| weston_rootfs: Add libgpiod and libgpiod tools ||
|-
|-
| Use proper fw_utils and machine specific fw_env.config files ||  
| imx8: libgbm1 updated to 20.3.4-1 required by latest weston update ||
|-
|-
| Restructure build script to support unified 32bit vs 64 bit compilation ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.2</span> ||  
| ''' Linux kernel updates:''' ||
|-
|-
| Linux kernel: Added Docker support ||  
| Upgraded to kernel version 5.4.85 ||
|-
|-
| U-Boot: Added flexibility to mmc part selection ||  
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| Added rng-tools ||  
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
|-
| Disabled the hostapd service by default (as wpa_supplicant is enabled) ||  
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||  
| '''U-Boot updates:''' ||
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||  
|-
|-
| Use legacy iptables by default ||  
| '''Debian build updates:''' ||
|-
|-
| Bluetooth audio support ||  
| Fix package dependencies and clean up ||
|-
|-
| Automount media support ||  
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|-
|-
| Power management fixes ||  
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|-
|-
| Multimedia fixes ||  
| Updated imx-firmware version to 8.8 ||
|-
|-
| CAN FD support ||  
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||  
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
|-
|-
| Initial Debian Buster release ||  
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><!--
 
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><!--
 
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.3}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><!--
 
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><!--
 
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><!--


--><section begin=RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
|-
| '''U-Boot updates''' ||
| Initial Debian Bullseye release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><includeonly>
{| class="wikitable"
|-
|-
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
! Change List !! Description
|-
|-
| '''Linux kernel updates''' ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
|-
| Updated to version 5.4.142 || Merge remote-tracking branch 'fslc/5.4-2.1.x-imx' into 5.4-2.1.x-imx_var01
| ''' Linux kernel updates:''' ||
|-
|-
| imx8_var_defconfig: add full docker support ||
| Upgraded to kernel version 5.4.85 ||
|-
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
|-
| Revert "Revert "gpio: pca953x: Disable PM routines"" ||
| '''U-Boot updates:''' ||
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||  
|-
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
| '''Debian build updates:''' ||
|-
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
| Fix package dependencies and clean up ||
|-
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|-
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|-
|-
| '''Debian updates:''' ||
| Updated imx-firmware version to 8.8 ||
|-
|-
| pulesaudio: Fix pulseaudio system-wide mode ||
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 ||
|-
|-
| systemd: set HandlePowerKey to ignore ||
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
|-
|-
| freertos-variscite: Add initial support for imx8mm ||
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><!--
 
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| deb: Add bluez-alsa 3.0.0 aligned to Dunfell release ||
! Change List !! Description
|-
|-
| bluez-alsa: ported bluez-alsa support from yocto-dunfell ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
|-
| weston_rootfs: Add libgpiod and libgpiod tools ||
| Initial Debian Bullseye release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
 
 
--><section begin=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| imx8: libgbm1 updated to 20.3.4-1 required by latest weston update ||
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| ''' Linux kernel updates:''' ||
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Upgraded to kernel version 5.4.85 ||
! Change List
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| Upgraded to kernel version 5.4.85
|-
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A
|-
|-
| '''U-Boot updates:''' ||
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0
|-  
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||
|-
|-
| '''Debian build updates:''' ||
| Fixed occasional pulseaudio device initialization problems
|-
|-
| Fix package dependencies and clean up ||
| Re-added packages available in previous Yocto releases 
|-
|-
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Updated imx-firmware version to 8.8 ||
! Change List
|-
|-
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
|-
|-
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0
|-
|-
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| Upgraded to kernel version 5.4.85
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A
|-
|-
| Initial Debian Bullseye release ||
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
--><section begin=RELEASE_BULLSEYE_V2.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| Fixed occasional pulseaudio device initialization problems
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||
| Re-added packages available in previous Yocto releases 
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| ''' Linux kernel updates:''' ||
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Upgraded to kernel version 5.4.85 ||
! Change List
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
! Change List !! Description
|-
|-
| '''U-Boot updates:''' ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||  
|-
|-
| '''Debian build updates:''' ||
| '''Yocto updates''' ||
|-
|-
| Fix package dependencies and clean up ||
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
|-
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
|-
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
|-
| Updated imx-firmware version to 8.8 ||
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
|-
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 ||
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
|-
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
|-
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| variscite-bt: Create SOM specific BT init scripts ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V2.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
| '''Linux updates''' ||
|-
|-
| Initial Debian Bullseye release ||  
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
|-
 
| gpio: pca953x: Introduce standard-regs-fallback property ||
 
|-
--><section begin=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><includeonly>
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
{| class="wikitable"
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
|-
! Change List
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><!--


--><section begin=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| Upgraded to kernel version 5.4.85
| '''U-Boot updates''' ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A
| Add delay to detect ADIN PHY ||
|-
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0
| '''Linux updates updates''' ||
|-
|-
| Fixed occasional pulseaudio device initialization problems
| Enable driver for ADIN PHY ||
|-
|-
| Re-added packages available in previous Yocto releases 
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| '''Yocto updates''' ||
|-
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
| freertos-variscite: Add 2.10.x support for imx8mm ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
|-
| Upgraded to kernel version 5.4.85
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
|-
| Fixed occasional pulseaudio device initialization problems
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
|-
| Re-added packages available in previous Yocto releases 
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><!--


--><section begin=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
| '''Linux updates updates''' ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| Enable driver for ADIN PHY ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
Line 858: Line 956:
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><!--


--><section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|-
| '''U-Boot updates''' ||
| '''U-Boot updates''' ||
|-
|-
| add delay to detect ADIN PHY ||
| ADIN1300: Disable RGMII RX clock delay ||
|-
|-
| '''Linux updates updates''' ||
| imx8mm-var-dart: read carrier_rev from eeprom ||
|-
|-
| enable driver for ADIN PHY ||
| '''Linux updates''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| Enable driver for ADIN PHY ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
Line 914: Line 1,030:
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><!--
 
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
 
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
 
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><!--
 
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
 
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
 
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
 
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><!--
 
--><section begin=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
 
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
 
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
 
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--
 
--><section begin=mx8mm-yocto-scarthgap-6.6.23_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-scarthgap-6.6.23_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-scarthgap-6.6.23_2.0.0-v1.0/><!--
 
--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly>


--><section begin=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| variscite-bt: Create SOM specific BT init scripts ||
| Upgraded to kernel version 5.4.85 ||
|-
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
|-
| '''Linux updates''' ||
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
| Fixed occasional pulseaudio device initialization problems ||
|-
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
| Re-added packages available in previous Yocto releases ||
|-
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
! Change List !! Description
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Move PWM to PWM3 || This allow compatibility with VAR-SOM-MX8M-MINI
|-
| Move UART to UART3 || This allow compatibility with VAR-SOM-MX8M-MINI
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
| Initial release for Cortex-M4 core of DART-MX8M-MINI ||
|-
| '''Tests conducted on:''' ||
|-
| GPIO/LED ||
|-
| I2C4 ||
|-
| PWM3 ||
|-
| UART3 ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
| Initial FreeRTOS 2.8.0 release for Cortex-M4 core of DART-MX8M-MINI
|}
|-
{{#vardefine:CHANGE_LOG_FOUND|true}}
| '''Tests conducted on:'''
</includeonly><section end=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><!--
|-
| GPIO/LED
|-
| I2C4
|-  
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><!--  


--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly>
--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List || Description
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
| Initial FreeRTOS 2.9.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
| '''Tests conducted on:'''
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| GPIO/LED
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
! Change List
|-
|-
| Upgraded to kernel version 5.4.85 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
| Initial FreeRTOS 2.10.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
| '''Tests conducted on:'''
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| GPIO/LED
|-
|-
| Re-added packages available in previous Yocto releases ||
| I2C4
|-  
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
| GPIO/LED
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| I2C4
|-  
|-  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| PWM3
|-  
|-  
| Move PWM to PWM3 || This allow compatibility with VAR-SOM-MX8M-MINI
| UART3
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
| Move UART to UART3 || This allow compatibility with VAR-SOM-MX8M-MINI
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><!--  
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release for Cortex-M4 core of DART-MX8M-MINI ||
|-
| '''Tests conducted on:''' ||
|-
| GPIO/LED ||
|-
| I2C4 ||
|-
| PWM3 ||
|-
| UART3 ||
|}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
</includeonly><section end=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><!--  


--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 1,047: Line 1,282:
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial FreeRTOS 2.8.0 release for Cortex-M4 core of DART-MX8M-MINI
| Initial FreeRTOS 2.12.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| '''Tests conducted on:'''
| '''Tests conducted on:'''
Line 1,059: Line 1,294:
| UART3
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><!--  
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><!--  


--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 1,068: Line 1,303:
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial FreeRTOS 2.9.0 release for Cortex-M4 core of DART-MX8M-MINI
| Initial FreeRTOS 2.13.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| '''Tests conducted on:'''
| '''Tests conducted on:'''
Line 1,080: Line 1,315:
| UART3
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><!--  
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><!--


--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 1,089: Line 1,324:
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial FreeRTOS 2.10.0 release for Cortex-M4 core of DART-MX8M-MINI
| Initial FreeRTOS 2.15.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
|-
| '''Tests conducted on:'''
| '''Tests conducted on:'''
Line 1,101: Line 1,336:
| UART3
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!--  
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly>
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly>
Line 1,500: Line 1,735:
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| Upgraded to kernel version 5.4.85 ||
| Upgraded to kernel version 5.4.85 ||
|-
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| Fixed occasional pulseaudio device initialization problems ||
|-
|-
| Re-added packages available in previous Yocto releases ||
| Re-added packages available in previous Yocto releases ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 10.0.0_2.6.0 (kernel 5.4.70) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Remap buttons || Home maps to Android Home page, Up maps to Volume Up and Down maps to Volume Down
|-
| Fix suspend resume issue ||
|-
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><!--
 
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| '''U-Boot updates''' ||
|-
| ADIN1300: Disable RGMII RX clock delay ||
|-
| imx8mm-var-dart: read carrier_rev from eeprom ||
|-
| Set AR8033 VDDH_REG to 1.8V ||
|-
|'''Linux updates updates''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><!--
 
--><section begin=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=mx8mm-android-11.0.0_2.6.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Android install script and machine name changes ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=mx8mm-android-11.0.0_2.6.0-v1.1/><!--
 
 
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.0/><!--


--><section begin=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><includeonly>
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.1}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.1/><!--
| Android 10.0.0_2.6.0 (kernel 5.4.70) for DART-MX8M-MINI ||
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.2/><includeonly>
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.2}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.2/><!--
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Remap buttons || Home maps to Android Home page, Up maps to Volume Up and Down maps to Volume Down
|-
| Fix suspend resume issue ||
|-
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><!--


 
<!--
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.0}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.0/><!--
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!--


--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.1}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.1/><!--
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><!--


--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><includeonly>
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.0}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.0/><!--
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><!--


--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><includeonly>
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.1}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.1/><!--
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><!--

Latest revision as of 15:21, 8 November 2024


DART-MX8M-MINI / VAR-SOM-MX8M-MINI Release Notes

Yocto warrior-fsl-4.19.35-mx8mm-v1.1

Release Notes

Based on release Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0
Release tag warrior-fsl-4.19.35-mx8mm-v1.1
Release manifest imx-4.19.35-1.1.0-var01.xml
Date 9/23/2020
Supported platforms DART-MX8M-MINI / VAR-SOM-MX8M-MINI
SOM revision v1.0 and higher
File System build system Yocto Warrior
Recovery SD card link dart-mx8mm-recovery-sd.v32.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx imx_v2019.04_4.19.35_1.1.0-var01 3e1643239fb11297209254dbaa803425cf0c1702
Kernel https://github.com/varigit/linux-imx imx_4.19.35_1.1.0_var01 dc7a2fde4ab056303e2011347438bdae23036c5e
meta-variscite-imx https://github.com/varigit/meta-variscite-imx warrior-imx-4.19.35-var01 207ebb821ab9d1942df73f6d1b294884359ea626


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List
Release 1.1
Yocto updates
Added an image with Docker support
fsl-image-qt5: allow building the toolchain using populate_sdk
Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
Kernel updates
Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
Kernel defconfig: Extend Docker features
U-Boot updates
SPL: Disabled SD card detect pin
Fixed M4 binary loading when using the TCM
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0


Retrieved from "https://variwiki.com/index.php?title=DART-MX8M-MINI_Release_Notes&oldid=27446"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 8 November 2024, at 15:21.

© 2024 Variscite. All rights reserved