DART-MX8M-MINI Release Notes: Difference between revisions

From Variscite Wiki
(Add RELEASE_DUNFELL_V1.0_DART-MX8M-MINI)
No edit summary
 
(178 intermediate revisions by 13 users not shown)
Line 7: Line 7:


-->
-->
<section begin=RELEASE_ZEUS_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
| '''Yocto'''
|-
| install_yocto script: Fixed udev stop/start for Yocto Zeus
|-
| bcm43xx-utils: Do not start WiFi if not available
|-
| bcm43xx-utils: Fix i2c-tools dependencies
|-
| '''Kernel'''
|-
| MLK-23349-1 usb: chipidea: otg: delete duplicate code
|-
| MLK-23349-2 usb: chipidea: udc: add sg list support
|-
| MLK-23349-6 usb: chipdea: don't return -EINVAL if request role is the same with current role
|-
| MLK-23408: ASoC: fsl_audmix: make clock and output src write only
|-
| Edt-ft5x06: check wakeup-source dts property
|-
| MLK-15083 watchdog: imx2_wdt: fallback to timeout reset if explicit reset fails
|-
| Add M4 support for DART-IMX8M-MINI and VAR-SOM-IMX8M-MINI
|-
| '''U-Boot'''
|-
| Fix M4 binary loading when using the TCM
|-
| Add common DRAM code
|-
| Fix board DRAM initialization code
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Zeus release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_ZEUS_V1.1_DART-MX8M-MINI/><!--
--><section begin=RELEASE_SUMO_V2.5_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.5</span> ||
|-
| MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group ||
|-
| Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI || Based on MLK-23275-1 by NXP
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.4</span> ||
|-
| Add support for rev. 1.1 of VAR-SOM-MX8M-MINI ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||
|-
| Add Bluetooth suspend/resume script ||
|-
| Add rng-tools package || This is useful to speedup docker's first run
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.2</span> ||
|-
| Added dual channel LVDS support || LVDS panels with resolutions up to 1080P are now supported
|-
| Added support for VAR-SOM-MX8M-MINI || Initial Yocto Release
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
|-
| Improved MIPI-CSI camera capture frame rate || Increased the number of gstreamer capture buffers to increase OV5640 camera frame rate to 30fps
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||
|-
| Upgraded to NXP BSP 4.14.98_2.0.0_ga ||
|-
| Upgraded WiFi and BT firmware to Laird release 7.0.0.142 ||
|-
| Added M4 support ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_SUMO_V2.5_DART-MX8M-MINI/><!--


<section begin=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|-
| '''Yocto Updates'''
| '''Yocto updates'''
|-
|-
| Added an image with Docker support
| Added an image with Docker support
|-
|-
| fsl-image-qt5: allow building the toolchain using populate_sdk
| fsl-image-qt5: allow building the toolchain using populate_sdk
|-
|-
| Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
| Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
|-
|-
| '''Kernel Updates'''
| '''Kernel updates'''
|-
|-
| Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
| Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
Line 29: Line 116:
| Kernel defconfig: Extend Docker features
| Kernel defconfig: Extend Docker features
|-
|-
| '''U-Boot Updates'''
| '''U-Boot updates'''
|-
|-
| SPL: Disabled SD card detect pin
| SPL: Disabled SD card detect pin
Line 39: Line 126:
| Upgraded to NXP BSP release 4.19.35_1.1.0
| Upgraded to NXP BSP release 4.19.35_1.1.0
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_WARRIOR_V1.1_DART-MX8M-MINI/><!--
--><section begin=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.1/><!--
--><section begin=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI}}
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.3_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:B2QT_DART-MX8M-MINI|RN_RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.2_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''meta-variscite-boot2qt''' ||
|-
| Update to Qt 6.0.4 ||
|-
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools ||
|-
| manifest: meta-variscite-fslc: Update to latest ||
|-
| '''U-Boot''' ||
|-
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
|-
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot ||
|-
| imx8mm_var_dart: Set console environment variable in the default environment ||
|-
| '''Linux''' ||
|-
| Upgraded to version 5.4.142 ||
|-
| imx8_var_defconfig: add full docker support ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| Revert "gpio: pca953x: Disable PM routines" ||
|-
| ARM: configs: Variscite: Enable USB_HSIC_USB3053 ||
|-
| ARM: configs: Variscite: disable EVBUG module ||
|-
| ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs ||
|-
| ASoC: wm8904: add DMIC support ||
|-
| ASoC: wm8904: extend device tree support ||
|-
| Revert "ASoC: wm8904: add DMIC support and allow enabling it" ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| First B2Qt Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.1_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| First Release
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
Line 73: Line 273:
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
Line 93: Line 293:
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
Line 102: Line 302:
</includeonly><section end=RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.3/><includeonly>
--><section begin=RELEASE_P9.0.0_2.0.0_GA_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 3.2</span> ||
|-
| Correct ldo1/ldo2 voltage on DART-MX8M-MINI and VAR-SOM-MX8M-MINI || Based on MLK-23275-1 by NXP
|-
| MLK-23275-3: regulator: bd71837: correct ldo1/ldo2 group ||
|-
| Added MTP/PTP support || (The current ptn5150 driver does not support role management)
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.4</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI 1.1 SOM ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
|-
| Upgrade to Pie 9.0.0 v2.0.0 (kernel 4.14.98) ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| Added CAN and I2C tools ||
|-
| Fixed USB keys support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Fixed the CPU operation points table ||
|-
| Added CPU speed grading fuse check ||
|-
| Added support for Microchip CAN FD ||
|-
| Added BLE advertising support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Added support for new board revisions ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Pie 9.0.0 v1.0.0 (kernel 4.14.78) for DART-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_P9.0.0_2.0.0_GA_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.5/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List !! Description
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fix occasional WiFi crash during bootup ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| | '''Android:''' ||
|-
|-
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
|-
|-
| '''Kernel:''' ||
| Kernel: Update Bluetooth firmware file name to BCM43430A1.hcd ||
|-
| Update bluetooth firmware file name to BCM43430A1.hcd ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
Line 121: Line 381:
| imx-atf: Fixed the derate enable conflict issue ||  
| imx-atf: Fixed the derate enable conflict issue ||  
|-
|-
| '''U-Boot:''' ||
| U-Boot: Fix m4 binary loading when using the TCM ||  
|-
| Fix m4 binary loading when using the TCM ||
|-
| '''Kernel:''' ||
|-
|-
| Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
| Kernel: Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
Line 139: Line 395:
| Added a new boot animation ||
| Added a new boot animation ||
|-
|-
| Framework auto focus support ||
| Framework auto focus support ||
|-
|-
| '''U-Boot:''' ||
| '''U-Boot:''' ||
Line 149: Line 405:
| OV5640 camera auto focus support ||  
| OV5640 camera auto focus support ||  
|-
|-
| Fixed missing SD reset pinmux definition for SOM Rev1.0 ||  
| Fixed missing SD reset pinmux definition for SOM rev. 1.0 ||  
|-
|-
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||  
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||  
Line 162: Line 418:
|-
|-
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.5/><!--
--><section begin=RELEASE_BUSTER_V2.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
|-
! Known Issues !!
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release v2.1</span> ||
|-
| '''U-Boot updates:''' ||
|-
| Fixed m4 binary loading when using the TCM ||
|-
| SPL: Disabled SD card detect pin ||
|-
| Linux kernel updates: ||
|-
| Corrected ldo1/ldo2 voltage for DART-MX8M-MINI and VAR-SOM-MX8M-MINI || Based on MLK-23275-1 by NXP
|-
| '''Debian build updates:''' ||
|-
| '''Debian 10.5 update: fix broken dependencies that removes imx-gpu-sdk packages''' ||
|-
| Fixed openssh-server dependencies for Debian 10.5 ||
|-
| Added loop device support to the build script ||
|-
| <span {{#var:STYLE_RELEASE}}>Release v2.0</span> ||
|-  
|-  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
| Initial Debian Buster release based on 4.19.35 ||
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.3/><!--
|}  
{{#vardefine:CHANGE_LOG_FOUND|true}}  
</includeonly><section end=RELEASE_BUSTER_V2.1_DART-MX8M-MINI/><!--  


--><section begin=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 3.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 3.0</span> ||
Line 185: Line 470:
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
|-
|-
| '''Debian Build Updates:''' ||  
| '''Debian Build updates:''' ||  
|-
|-
| Align mx8_install_debian.sh to lastest mx8_install_yocto.sh ||  
| Align mx8_install_debian.sh to lastest mx8_install_yocto.sh ||  
Line 217: Line 502:
| Move rpmsg area at 0x40000000 ||  
| Move rpmsg area at 0x40000000 ||  
|-
|-
| '''Debian Build Updates:''' ||  
| '''Debian Build updates:''' ||  
|-
|-
| Rename debian-emmc.sh -> install_debian.sh  ||  
| Rename debian-emmc.sh -> install_debian.sh  ||  
Line 261: Line 546:
| Initial Debian Buster release ||  
| Initial Debian Buster release ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M-MINI/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''U-Boot updates''' ||
|-
| imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues
|-
| '''Linux kernel updates''' ||
|-
| Updated to version 5.4.142 || Merge remote-tracking branch 'fslc/5.4-2.1.x-imx' into 5.4-2.1.x-imx_var01
|-
| imx8_var_defconfig: add full docker support ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Revert "Revert "gpio: pca953x: Disable PM routines"" ||
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| '''Debian updates:''' ||
|-
| pulesaudio: Fix pulseaudio system-wide mode ||
|-
| systemd: set HandlePowerKey to ignore ||
|-
| freertos-variscite: Add initial support for imx8mm ||
|-
| deb: Add bluez-alsa 3.0.0 aligned to Dunfell release ||
|-
| bluez-alsa: ported bluez-alsa support from yocto-dunfell ||
|-
| weston_rootfs: Add libgpiod and libgpiod tools ||
|-
| imx8: libgbm1 updated to 20.3.4-1 required by latest weston update ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| '''U-Boot updates:''' ||
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||
|-
| '''Debian build updates:''' ||
|-
| Fix package dependencies and clean up ||
|-
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|-
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|-
| Updated imx-firmware version to 8.8 ||
|-
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 ||
|-
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
|-
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.1/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.2/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.3}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><!--
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0/><!--
--><section begin=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1}}
{{#lst:DPC_DART-MX8M-MINI|RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1/><!--


--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
Line 271: Line 669:
| Initial Debian Bullseye release ||  
| Initial Debian Bullseye release ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--
--><section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| '''U-Boot updates:''' ||
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||
|-
| '''Debian build updates:''' ||
|-
| Fix package dependencies and clean up ||
|-
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|-
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|-
| Updated imx-firmware version to 8.8 ||
|-
| Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 ||
|-
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
|-
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-debian-bullseye-5.4-2.1.x-v1.0/><!--
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Debian Bullseye release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M-MINI/><!--


--><section begin=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
Line 283: Line 729:
{{#vardefine:CHANGE_LOG_FOUND|true}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><!--
</includeonly><section end=RELEASE_DUNFELL_V1.0_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
| Upgraded to kernel version 5.4.85
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0
|-
| Fixed occasional pulseaudio device initialization problems
|-
| Re-added packages available in previous Yocto releases 
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.1_DART-MX8M-MINI/><!--
--><section begin=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
| Upgraded to kernel version 5.4.85
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0
|-
| Fixed occasional pulseaudio device initialization problems
|-
| Re-added packages available in previous Yocto releases 
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.2_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.0_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.1_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| Enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.2_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| Enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.3_DART-MX8M-MINI/><!--
--><section begin=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| '''U-Boot updates''' ||
|-
|  ADIN1300: Disable RGMII RX clock delay ||
|-
| imx8mm-var-dart: read carrier_rev from eeprom ||
|-
| '''Linux updates''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
| Add delay to detect ADIN PHY ||
|-
| '''Linux updates updates''' ||
|-
| Enable driver for ADIN PHY ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| '''Yocto updates''' ||
|-
| freertos-variscite: Add 2.10.x support for imx8mm ||
|-
| swupdate: workaround for UTF8 compatibility in libarchive ||
|-
| bcm43xx-utils: variscite-wifi: Add wifi_down routine ||
|-
| fsl-image-gui: Remove eclipse-debug from IMAGE_FEATURES ||
|-
| bcm43xx-utils: Consolidate WIFI scripts ||
|-
| bcm43xx-utils: Move Variscite IMX6UL/IMX7/IMX8 BT scripts from bluez5 package ||
|-
| variscite-bt: Create SOM specific BT init scripts ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| '''Linux updates''' ||
|-
| imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| imx8mm-var-som: Disable usbotg1 hnp, srp, and adp ||
|-
| imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Hardknott release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_HARDKNOTT_V1.4_DART-MX8M-MINI/><!--
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1/><!--
--><section begin=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-hardknott-5.10.72_2.2.1-v1.2/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
--><section begin=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-kirkstone-5.15-2.0.x-v1.3/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.22_2.0.0-v1.0/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1/><!--
--><section begin=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.1}}
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-mickledore-6.1.36_2.1.0-v1.2/><!--
--><section begin=mx8mm-yocto-scarthgap-6.6.23_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M-MINI|RN_mx8mm-yocto-scarthgap-6.6.23_2.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-yocto-scarthgap-6.6.23_2.0.0-v1.0/><!--
--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.3_DART-MX8M-MINI/><!--
--><section begin=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Move PWM to PWM3 || This allow compatibility with VAR-SOM-MX8M-MINI
|-
| Move UART to UART3 || This allow compatibility with VAR-SOM-MX8M-MINI
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release for Cortex-M4 core of DART-MX8M-MINI ||
|-
| '''Tests conducted on:''' ||
|-
| GPIO/LED ||
|-
| I2C4 ||
|-
| PWM3 ||
|-
| UART3 ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.5.0_V1.1_DART-MX8M-MINI/><!--


--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><includeonly>
--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Changes List
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
Line 297: Line 1,204:
| GPIO/LED
| GPIO/LED
|-
|-
| I2C3
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.9.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.10.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.12.1 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.13.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial FreeRTOS 2.15.0 release for Cortex-M4 core of DART-MX8M-MINI
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C4
|-
| PWM3
|-
| UART3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| CAN: Upgraded the MCP251XFD CAN driver ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fix occasional WiFi crash during bootup ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
|-
| Kernel: Update Bluetooth firmware file name to BCM43430A1.hcd ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| imx-atf: Fixed the derate enable conflict issue ||
|-
| U-Boot: Fix m4 binary loading when using the TCM ||
|-
| Kernel: Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
|-
| '''Android:''' ||
|-
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
|-
| Switched Android UI dpi to 160dpi ||
|-
| Added a new boot animation ||
|-
| Framework auto focus support ||
|-
| '''U-Boot:''' ||
|-
| SPL: Disabled SD card detect pin ||
|-
| '''Kernel:''' ||
|-
| OV5640 camera auto focus support ||
|-
| Fixed missing SD reset pinmux definition for SOM rev. 1.0 ||
|-
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||
|-
| drm/bridge: nwl-dsi: allow using legacy pll settings||
|-
| Added Cortex-M4 related device trees ||
|-
| sound: pcm_memory: export snd_pcm_lib_preallocate_free ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.6/><!--
 
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.7/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
|-
| Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| CAN: Upgraded the MCP251XFD CAN driver ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fix occasional WiFi crash during bootup ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Update BT/WiFi firmware for bc43xx to Laird release 8.2.0.16 ||
|-
| Kernel: Update Bluetooth firmware file name to BCM43430A1.hcd ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| imx-atf: Fixed the derate enable conflict issue ||
|-
| U-Boot: Fix m4 binary loading when using the TCM ||
|-
| Kernel: Correct ldo1/ldo2 voltage for DART-MX8MM-MINI and VAR-SOM-MX8MM-MINI || Based on MLK-23275-1 by NXP
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
|-
| '''Android:''' ||
|-
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
|-
| Switched Android UI dpi to 160dpi ||
|-
| Added a new boot animation ||
|-
| Framework auto focus support ||
|-
| '''U-Boot:''' ||
|-
| SPL: Disabled SD card detect pin ||
|-
| '''Kernel:''' ||
|-
| OV5640 camera auto focus support ||
|-
| Fixed missing SD reset pinmux definition for SOM rev. 1.0 ||
|-
| MLK-21958-6 introduced a new clocks calculation method for mipi panels ||
|-
| drm/bridge: nwl-dsi: allow using legacy pll settings||
|-
| Added Cortex-M4 related device trees ||
|-
| sound: pcm_memory: export snd_pcm_lib_preallocate_free ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 10.0.0 v1.0.0 (kernel 4.19.42) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M-MINI_V1.7/><!--
 
--><section begin=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|  Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.4_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || It is a known issue on NXP devkit
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. ||
|-
| Added dependencies to avoid conflict between connman and systemd-networkd ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|  Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.5_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
|-
| Update Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. ||
|-
| Added dependencies to avoid conflict between connman and systemd-networkd ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|  Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.6_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><includeonly>
{| class="wikitable"
|-
! Change List || Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.7</span> ||
|-
| sn65dsi83: Add device tree property to swap LVDS Channel A/B ||
|-
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
|-
| Update Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
| linux-firmware: update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. ||
|-
| Added dependencies to avoid conflict between connman and systemd-networkd ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|  Fixed CAN controller pins || The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| Added support for VAR-SOM-MX8M-MINI revision 1.3 ||
|-
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: [[VAR-SOM-MX8M-MINI-CAN|VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support]]
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Upgraded to kernel version 5.4.85 ||
|-
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A ||
|-
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|-
| Re-added packages available in previous Yocto releases ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI ||
|}
{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_DUNFELL_V1.7_DART-MX8M-MINI/><!--
 
--><section begin=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 10.0.0_2.6.0 (kernel 5.4.70) for DART-MX8M-MINI ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_10.0.0_2.6.0_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
| Remap buttons || Home maps to Android Home page, Up maps to Volume Up and Down maps to Volume Down
|-
| Fix suspend resume issue ||
|-
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_1.0.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_1.0.0_GA_DART-MX8M-MINI_V1.1/><!--
 
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.1/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.2/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.3/><!--
 
--><section begin=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| '''U-Boot updates''' ||
|-
| ADIN1300: Disable RGMII RX clock delay ||
|-
| imx8mm-var-dart: read carrier_rev from eeprom ||
|-
| Set AR8033 VDDH_REG to 1.8V ||
|-
|'''Linux updates updates''' ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Refactor code to detect ADIN PHY || Moved delay to device tree node
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''U-Boot updates''' ||
|-
|  Add delay to detect ADIN PHY ||
|-
|'''Linux updates updates''' ||
|-
|  Enable ADIN PHY support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Remove BACK button detection from U-Boot || A/B (Seamless) System Updates is used by default and doesn't require a button to boot into recovery
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.4.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.4.0_GA_DART-MX8M-MINI_V1.4/><!--
 
--><section begin=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=RELEASE_11.0.0_2.6.0_GA_DART-MX8M-MINI_V1.0/><!--
 
--><section begin=mx8mm-android-11.0.0_2.6.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Android install script and machine name changes ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial release based on NXP's android-11.0.0_2.6.0 for the i.MX8M Mini ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably ||
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}
</includeonly><section end=mx8mm-android-11.0.0_2.6.0-v1.1/><!--
 
 
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.0/><!--
 
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.1/><!--
--><section begin=mx8mm-android-12.0.0_1.0.0-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-12.0.0_1.0.0-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-12.0.0_1.0.0-v1.2/><!--
 
<!--
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.0/><!--
 
--><section begin=mx8mm-android-13.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-13.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-13.0.0_1.0.0-v1.1/><!--
 
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.0/><!--
 
--><section begin=mx8mm-android-14.0.0_1.0.0-v1.1/><includeonly>
{| class="wikitable"
|-
|-
| PWM2
! Change List !! Description
|-
|-
| UART2
{{#lst:APC_DART-MX8M-MINI|RN_mx8mm-android-14.0.0_1.0.0-v1.1}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M-MINI/>
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8mm-android-14.0.0_1.0.0-v1.1/><!--

Latest revision as of 15:21, 8 November 2024


DART-MX8M-MINI / VAR-SOM-MX8M-MINI Release Notes

Yocto warrior-fsl-4.19.35-mx8mm-v1.1

Release Notes

Based on release Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0
Release tag warrior-fsl-4.19.35-mx8mm-v1.1
Release manifest imx-4.19.35-1.1.0-var01.xml
Date 9/23/2020
Supported platforms DART-MX8M-MINI / VAR-SOM-MX8M-MINI
SOM revision v1.0 and higher
File System build system Yocto Warrior
Recovery SD card link dart-mx8mm-recovery-sd.v32.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx imx_v2019.04_4.19.35_1.1.0-var01 3e1643239fb11297209254dbaa803425cf0c1702
Kernel https://github.com/varigit/linux-imx imx_4.19.35_1.1.0_var01 dc7a2fde4ab056303e2011347438bdae23036c5e
meta-variscite-imx https://github.com/varigit/meta-variscite-imx warrior-imx-4.19.35-var01 207ebb821ab9d1942df73f6d1b294884359ea626


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List
Release 1.1
Yocto updates
Added an image with Docker support
fsl-image-qt5: allow building the toolchain using populate_sdk
Bcm43xx-utils: Do not start WiFi if not available, Fix i2c-tools dependencies
Kernel updates
Kernel (DT): Correct LDO1/LDO2 voltages on DART-MX8M-MINI and VAR-SOM-MX8M-MINI (based on MLK-23275-1 by NXP)
Kernel defconfig: Extend Docker features
U-Boot updates
SPL: Disabled SD card detect pin
Fixed M4 binary loading when using the TCM
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0


Retrieved from "https://variwiki.com/index.php?title=DART-MX8M-MINI_Release_Notes&oldid=27446"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 8 November 2024, at 15:21.

© 2024 Variscite. All rights reserved