DART-MX8M Release Notes: Difference between revisions

From Variscite Wiki
(MCUXPRESSO_2.12.1_V1.0_DART-MX8M: add ECSP1 test note)
(Update 'Known Issues')
 
(28 intermediate revisions by 6 users not shown)
Line 272: Line 272:
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-b2qt-hardknott-5.10.72_2.2.1-v1.0/><!--


--><section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
--><section begin=mx8m-b2qt-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Initial Yocto Kirkstone release||Based on [https://github.com/Freescale/linux-fslc/commit/d818413e4d7901cb8a00a631a389326e2c93ae41 FSLC 5.15-2.0.x-imx] (kernel 5.15.60) which is based on [https://source.codeaurora.org/external/imx/linux-imx/log/?h=lf-5.15.32-2.0.0 NXP lf-5.15.32-2.0.0] and merged with [https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=v5.15.60 Linux Stable 5.15.60]
! Change List !! Description
|}
{{#lst:B2QT_DART-MX8M|RN_mx8m-b2qt-kirkstone-5.15-2.0.x-v1.0}}
{{#vardefine:CHANGE_LOG_FOUND|true}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-b2qt-kirkstone-5.15-2.0.x-v1.0/><!--
</includeonly><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.0/><!--


--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M/><includeonly>
--><section begin=mx8m-b2qt-kirkstone-5.15-2.0.x-v1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
{{#lst:B2QT_DART-MX8M|RN_mx8m-b2qt-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:B2QT_DART-MX8M|RN_mx8m-b2qt-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-b2qt-kirkstone-5.15-2.0.x-v1.1/><!--
--><section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.0/><includeonly>
{| class="wikitable"
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
! Change List !! Description
|-
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}}
| '''Kernel:''' ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.0/><!--
|-
 
| Fix the occasional flickering at the bottom of the kit display || Use NXP clock improvements and switch to 3 mipi lanes
--><section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.1/><includeonly>
|-
{| class="wikitable"
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
|-
! Change List !! Description
| '''Android:''' ||
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.1}}
|-
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}}
| Framework auto focus support ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.1/><!--
 
--><section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.2/><!--
 
--><section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.3/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.3}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.3/><!--
 
--><section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.4/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.4}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.3}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.4/><!--
 
--><section begin=mx8m-yocto-kirkstone-5.15-2.0.x-v1.5/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.5}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.4}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.3}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.2}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.1}}
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-kirkstone-5.15-2.0.x-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-kirkstone-5.15-2.0.x-v1.5/><!--
 
--><section begin=mx8m-yocto-mickledore-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
|-
| imx-atf: Fixed the derate enable conflict issue ||  
! Change List !! Description
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-mickledore-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-mickledore-6.1.36_2.1.0-v1.0/><!--
 
--><section begin=RELEASE_Q10.0.0_1.0.0_GA_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
| '''U-Boot:''' ||
! Change List !! Description
|-
|-
| SPL: Disable SD card detect pin ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
|-
| '''Kernel:''' ||
| '''Kernel:''' ||
|-
|-
| OV5640 camera auto focus support ||  
| Fix the occasional flickering at the bottom of the kit display || Use NXP clock improvements and switch to 3 mipi lanes
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| '''Android:''' ||
|-
| Framework auto focus support ||
|-
| imx-atf: Fixed the derate enable conflict issue ||
|-
| '''U-Boot:''' ||
|-
| SPL: Disable SD card detect pin ||
|-
| '''Kernel:''' ||
|-
| OV5640 camera auto focus support ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>||
|-
|-
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
| Added MTP and PTP support || (The current ptn5150 driver does not support power delivery role swap)
Line 492: Line 562:
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.0_DART-MX8M/><!--


--><section begin=mx8m-debian-bullseye-5.4-2.1.x-v1.4/><includeonly>
--><section begin=mx8m-debian-bookworm-6.1.36_2.1.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:DPC_DART-MX8M|RN_mx8m-debian-bookworm-6.1.36_2.1.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-debian-bookworm-6.1.36_2.1.0-v1.0/><!--
 
 
--><section begin=mx8m-debian-bullseye-5.4-2.1.x-v1.5/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
|-
| ''' Linux kernel updates:''' ||
| ''' U-Boot updates:''' ||
|-
|-
| imx8mq_var_dart_defconfig: enable driver for ADIN PHY ||
| lpddr4_timing: Align to RPA v33 + DDR Tool v3.31 ||
|-
| ''' Kernel updates:''' ||
|-
| disable USB PHY rxdect at P3 ||
|-
| PCI: toggle the perst after the release of rc's reset ||
|-
| ''' Debian updates:''' ||
|-
| pm-utils: re-sort eth hook  ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| imx8mq_var_dart_defconfig: enable driver for ADIN PHY ||
|-
|-
| imx8mq-var-dart: fec: add phy-reset-post-delay ||
| imx8mq-var-dart: fec: add phy-reset-post-delay ||
Line 621: Line 715:
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-debian-bullseye-5.4-2.1.x-v1.4/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-debian-bullseye-5.4-2.1.x-v1.5/><!--


--><section begin=RELEASE_BULLSEYE_V1.3_DART-MX8M/><includeonly>
--><section begin=mx8m-debian-bullseye-5.4-2.1.x-v1.4/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||  
|-
|-
| ''' U-Boot updates:''' ||
| ''' Linux kernel updates:''' ||
|-
|-
| imx8mq_var_dart: Use same relocation address for 1G,2G,3G,4G SOMs || This fixes invalid hab_status response on 3G/4G modules
| imx8mq_var_dart_defconfig: enable driver for ADIN PHY ||
|-
|-
| imx8: ahab: Only compile ahab.c for U-Boot and not SPL ||
| imx8mq-var-dart: fec: add phy-reset-post-delay ||
|-
|-
| ''' Linux kernel updates:''' ||
| imx8mq-var-dart: Update machine name ||
|-
|-
| imx8mq_var_dart_defconfig: add full docker support ||
| net: phy: adin: add adi,phy-mode-override property ||
|-
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support ||
|-
| ''' U-Boot updates:''' ||
|-
| imx8mq_var_dart: fec: add phy-reset-post-delay ||
|-
| variscite: eth: ADIN1300: Disable RGMII RX clock delay ||
|-
| variscite: imx8_eeprom: drop VAR_EEPROM_F_LVDS and cleanup indentation ||
|-
| ''' Debian updates:''' ||
|-
| imx8mq-var-dart: Add Ethernet suspend/resume script ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||
|-
| ''' U-Boot updates:''' ||
|-
| imx8mq_var_dart: Use same relocation address for 1G,2G,3G,4G SOMs || This fixes invalid hab_status response on 3G/4G modules
|-
| imx8: ahab: Only compile ahab.c for U-Boot and not SPL ||
|-
| ''' Linux kernel updates:''' ||
|-
| imx8mq_var_dart_defconfig: add full docker support ||
|-
|-
| imx8mq-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
| imx8mq-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
Line 726: Line 846:
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.3_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-debian-bullseye-5.4-2.1.x-v1.4/><!--


 
--><section begin=RELEASE_BULLSEYE_V1.3_DART-MX8M/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.2_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span> ||  
|-
|-
| ''' Linux kernel updates:''' ||
| ''' U-Boot updates:''' ||
|-
|-
| sn65dsi83: Add optional "ti,even-odd-swap" device tree property to swap LVDS Channel A/B
| imx8mq_var_dart: Use same relocation address for 1G,2G,3G,4G SOMs || This fixes invalid hab_status response on 3G/4G modules
|-
|-
| Add PCIE PHY power regulator ||
| imx8: ahab: Only compile ahab.c for U-Boot and not SPL ||
|-
|-
| Remove "hard-wired" PCIE0 controller property ||
| ''' Linux kernel updates:''' ||
|-
|-
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
| imx8mq_var_dart_defconfig: add full docker support ||
|-
|-
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
| imx8mq-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
|-
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
| gpio: pca953x: Introduce standard-regs-fallback property ||
|-
|-
| Update the Linux kernel to 5.4.142
| gpio: pca953x: Introduce support for nxp,pcal6408 ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||  
| Revert 'Revert 'gpio: pca953x: Disable PM routines'' ||
|-
|-
|Removed obsolete packages ||
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" ||
|-
| ''' Debian updates:''' ||
|-
| systemd: set HandlePowerKey to ignore ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| sn65dsi83: Add optional "ti,even-odd-swap" device tree property to swap LVDS Channel A/B
|-
| Add PCIE PHY power regulator ||
|-
| Remove "hard-wired" PCIE0 controller property ||
|-
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
|-
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
|-
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
|-
| Update the Linux kernel to 5.4.142
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|Removed obsolete packages ||
|-
|-
|Update new packages to iperf3, libgpiod ||
|Update new packages to iperf3, libgpiod ||
Line 806: Line 951:
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.2_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.3_DART-MX8M/><!--




--><section begin=RELEASE_BULLSEYE_V1.1_DART-MX8M/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.2_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| sn65dsi83: Add optional "ti,even-odd-swap" device tree property to swap LVDS Channel A/B
|-
| Add PCIE PHY power regulator ||
|-
| Remove "hard-wired" PCIE0 controller property ||
|-
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
|-
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
|-
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
|-
| Update the Linux kernel to 5.4.142
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||  
Line 868: Line 1,031:
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.1_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.2_DART-MX8M/><!--




--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M/><includeonly>
--><section begin=RELEASE_BULLSEYE_V1.1_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||  
|-
|-
| Debian Bullseye release with Linux kernel 5.4.85 || All relevant DART-IMX8M packages were updated to match Yocto Dunfell
|Removed obsolete packages ||
|-
|-
| ''' Linux kernel updates:''' ||
|Update new packages to iperf3, libgpiod ||
|-
|-
| Upgraded to kernel version 5.4.85 ||
|Fix kernel headers build path ||
|-
|-
| '''U-Boot updates:''' ||
|qemu-static-arm64 - updated to 6.0.0 ||
|-  
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||  
|-
|-
| '''Debian build updates:''' ||
|FreeRTOS support for M4 ||
|-
|-
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|Bug fix package dependencies ||
|-
|-
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|Update Debian packages to latest stable snapshot ||
|-
|-
| Updated imx-firmware version to 8.8 ||
| ''' Linux kernel updates:''' ||
|-
|-
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
| ARM: configs: Variscite: Enable USB_HSIC_USB3053 ||
|-
|-
| imx-mkimage: Update patch to align to Yocto Dunfell ||
| ARM: configs: Variscite: disable EVBUG module ||
|-
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M/><!--
| Revert "pad-imx8qm: add defines for wakeup trigger types" ||
 
 
--><section begin=RELEASE_BUSTER_V3.1_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 3.1</span> ||
| ASoC: wm8904: add DMIC support ||
|-
|-
| Updated bc43xx BT/WiFi firmware to Laird release 8.2.0.16 ||
| ASoC: wm8904: extend device tree support ||
|-
|-
| '''Linux kernel updates:''' ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
|-
| Updated VDD_GPU voltage  || This solves GPU instability issues seen on a small percentage of SOMs
| Debian Bullseye release with Linux kernel 5.4.85 || All relevant DART-IMX8M packages were updated to match Yocto Dunfell
|-
|-
| MLK-22694: arch64: dts: fsl-imx8mq: Move src for dsi nodes and add lcdif clock ||
| ''' Linux kernel updates:''' ||
|-
|-
| MLK-22694: imx: nwl_dsi-imx: Move mipi resets for i.MX8MQ ||
| Upgraded to kernel version 5.4.85 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 3.0</span> ||
|-
|-
| '''U-Boot updates:''' ||  
| '''U-Boot updates:''' ||  
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||
|-
|-
| Update to latest 2019.04_4.19.35_1.1.0 branch ||  
| '''Debian build updates:''' ||
|-
|-
| '''Linux kernel updates:''' ||  
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|-
|-
| Update to latest kernel 4.19.35_1.1.0 branch ||  
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|-
|-
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
| Updated imx-firmware version to 8.8 ||
|-
|-
| '''Debian build updates:''' ||  
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
|-
|-
| Align mx8_install_debian.sh to latest mx8_install_yocto.sh ||  
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|-
|-
| Rename imx8m-var-dart machine to imx8mq-var-dart ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.1_DART-MX8M/><!--
 
 
--><section begin=RELEASE_BULLSEYE_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
| Multimedia gstreamer packages updated to 1.16 version ||
! Change List !! Description
|-
|-
| GPU SDK support ||  
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||  
|-
|-
| WIFI and BT firmware update to latest release 7.0.0.142 ||  
| Debian Bullseye release with Linux kernel 5.4.85 || All relevant DART-IMX8M packages were updated to match Yocto Dunfell
|-
|-
| Power management updates ||  
| ''' Linux kernel updates:''' ||
|-
|-
| Building imx-atf from source code ||
| Upgraded to kernel version 5.4.85 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||  
|-
|-
| '''U-Boot updates:''' ||  
| '''U-Boot updates:''' ||  
|-
| Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch ||
|-
|-
| MLK-20966 TMU: Fix for temperature out of range ||  
| '''Debian build updates:''' ||
|-
|-
| Bug fixes for cma allocation ||  
| Clean-up /tmp in the rootfs after building the Linux kernel headers package ||
|-
|-
| '''Linux kernel updates:''' ||
| Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia ||
|-
|-
| MLK-23305 Fix the incorrect voltage scaling ||
| Updated imx-firmware version to 8.8 ||
|-
|-
| Move M4 reserved RAM at 0x7e000000 ||
| imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch ||
|-
|-
| Move rpmsg area at 0x40000000 ||
| imx-mkimage: Update patch to align to Yocto Dunfell ||
|-
|-
| '''Debian build updates:''' ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BULLSEYE_V1.0_DART-MX8M/><!--
 
 
--><section begin=RELEASE_BUSTER_V3.1_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
| Rename debian-emmc.sh -> install_debian.sh  ||
! Change List !! Description
|-
|-
| Fix missing cb12 dtb installation for DT8MCustomBoard V1.2 & V1.1 ||
| <span {{#var:STYLE_RELEASE}}>Release 3.1</span> ||
|-
|-
| Update blacklist.conf for eMMC/fec modules ||
| Updated bc43xx BT/WiFi firmware to Laird release 8.2.0.16 ||
|-
|-
| WiFi qemu-arm64 usleep fix to support usleep command on rootfs ||
| '''Linux kernel updates:''' ||  
|-
|-
| Update default qemu-arm64 to 4.1.1 to fix openssh-server installation ||
| Updated VDD_GPU voltage  || This solves GPU instability issues seen on a small percentage of SOMs
|-
|-
| Use proper fw_utils and machine specific fw_env.config files ||
| MLK-22694: arch64: dts: fsl-imx8mq: Move src for dsi nodes and add lcdif clock ||
|-
|-
| Restructure build script to support unified 32bit vs 64 bit compilation ||
| MLK-22694: imx: nwl_dsi-imx: Move mipi resets for i.MX8MQ ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 3.0</span> ||
|-
|-
| Linux kernel: Added Docker support ||  
| '''U-Boot updates:''' ||  
|-
|-
| U-Boot: Added flexibility to mmc part selection ||  
| Update to latest 2019.04_4.19.35_1.1.0 branch ||  
|-
|-
| Added rng-tools ||  
| '''Linux kernel updates:''' ||  
|-
|-
| Disabled the hostapd service by default (as wpa_supplicant is enabled) ||  
| Update to latest kernel 4.19.35_1.1.0 branch ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||  
| Dual Display Support || LVDS, LVDS + DP, LVDS + HDMI combination supported
|-
|-
| Use legacy iptables by default ||  
| '''Debian build updates:''' ||  
|-
|-
| Bluetooth audio support ||  
| Align mx8_install_debian.sh to latest mx8_install_yocto.sh ||  
|-
|-
| Automount media support ||  
| Rename imx8m-var-dart machine to imx8mq-var-dart ||  
|-
|-
| Power management fixes ||  
| Multimedia gstreamer packages updated to 1.16 version ||  
|-
|-
| Multimedia fixes ||  
| GPU SDK support ||  
|-
|-
| CAN FD support ||  
| WIFI and BT firmware update to latest release 7.0.0.142 ||  
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||  
| Power management updates ||  
|-
|-
| Initial Debian Buster release ||  
| Building imx-atf from source code ||  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.1_DART-MX8M/><!--
|-
 
| <span {{#var:STYLE_RELEASE}}>Release 2.3</span> ||
 
--><section begin=MCUXPRESSO_2.5.1_V1.1_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
! Change List
| '''U-Boot updates:''' ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| MLK-20966 TMU: Fix for temperature out of range ||  
|-
| Removed unneeded build outputs from original NXP BSP
|-
| GPT capture: add conflicts note
|-  
| LED output: cosmetic changes
|-
| Moved M4 reserved RAM at 0x7e000000
|-
| Moved rpmsg area at 0x40000000
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| Bug fixes for cma allocation ||  
|-
| Initial FreeRTOS release for Cortex-M4 core of DART-MX8M
|-
| '''Tests conducted on:'''
|-
| GPIO/LED
|-
| I2C3
|-
| PWM2
|-
| UART2
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.5.1_V1.1_DART-MX8M/><!--
 
 
--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
! Change List
| '''Linux kernel updates:''' ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| MLK-23305 Fix the incorrect voltage scaling ||
|-
|-
| Initial FreeRTOS 2.8.0 release for Cortex-M4 core of DART-MX8M
| Move M4 reserved RAM at 0x7e000000 ||
|-
|-
| '''Tests conducted on:'''
| Move rpmsg area at 0x40000000 ||
|-
|-
| GPIO/LED
| '''Debian build updates:''' ||
|-
|-
| I2C3
| Rename debian-emmc.sh -> install_debian.sh  ||
|-
|-
| PWM2
| Fix missing cb12 dtb installation for DT8MCustomBoard V1.2 & V1.1 ||
|-
| Update blacklist.conf for eMMC/fec modules ||
|-
|-
| UART2
| WiFi qemu-arm64 usleep fix to support usleep command on rootfs ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M/><!--
 
--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
! Change List
| Update default qemu-arm64 to 4.1.1 to fix openssh-server installation ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| Use proper fw_utils and machine specific fw_env.config files ||
|-
|-
| Initial FreeRTOS 2.9.0 release for Cortex-M4 core of DART-MX8M
| Restructure build script to support unified 32bit vs 64 bit compilation ||
|-
|-
| '''Tests conducted on:'''
| <span {{#var:STYLE_RELEASE}}>Release 2.2</span> ||
|-
|-
| GPIO/LED
| Linux kernel: Added Docker support ||
|-
|-
| I2C3
| U-Boot: Added flexibility to mmc part selection ||
|-
|-
| PWM2
| Added rng-tools ||
|-
|-
| UART2
| Disabled the hostapd service by default (as wpa_supplicant is enabled) ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M/><!--
|-
 
| <span {{#var:STYLE_RELEASE}}>Release 2.1</span> ||
--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
! Change List
| Use legacy iptables by default ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| Bluetooth audio support ||
|-
|-
| Initial FreeRTOS 2.10.0 release for Cortex-M4 core of DART-MX8M
| Automount media support ||
|-
|-
| '''Tests conducted on:'''
| Power management fixes ||
|-
|-
| GPIO/LED:<br>LED7 for DT8CustomBoard 1.x<br> U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)
| Multimedia fixes ||
|-
|-
| I2C3
| CAN FD support ||
|-
|-
| PWM2
| <span {{#var:STYLE_RELEASE}}>Release 2.0</span> ||
|-
|-
| UART2
| Initial Debian Buster release ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_BUSTER_V3.1_DART-MX8M/><!--
 


--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M/><includeonly>
--><section begin=MCUXPRESSO_2.5.1_V1.1_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List
! Change List
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
| Removed unneeded build outputs from original NXP BSP
|-
| GPT capture: add conflicts note
|-
| LED output: cosmetic changes
|-
| Moved M4 reserved RAM at 0x7e000000
|-
| Moved rpmsg area at 0x40000000
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-  
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M
| Initial FreeRTOS release for Cortex-M4 core of DART-MX8M
|-
|-  
| '''Tests conducted on:'''
| '''Tests conducted on:'''
|-
|-  
| GPIO/LED:<br>LED7 for DT8CustomBoard 1.x<br> U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)
| GPIO/LED
|-
|-  
| I2C3
| I2C3
|-
|-  
| PWM2
| PWM2
|-
|-  
| UART2
| UART2
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.5.1_V1.1_DART-MX8M/><!--
 


--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M/><includeonly>
--><section begin=MCUXPRESSO_2.8.0_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 1,130: Line 1,275:
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial FreeRTOS 2.12.1 release for Cortex-M4 core of DART-MX8M
| Initial FreeRTOS 2.8.0 release for Cortex-M4 core of DART-MX8M
|-
|-
| '''Tests conducted on:'''
| '''Tests conducted on:'''
|-
|-
| GPIO/LED:<br>U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)
| GPIO/LED
|-
|-
| I2C3
| I2C3
Line 1,141: Line 1,286:
|-
|-
| UART2
| UART2
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.8.0_V1.0_DART-MX8M/><!--
| ECSP1:<br>Tested with ECSP1 disabled in the m4 device tree
|-
| QSPI:<br>Tested without QSPI device connected to the interface
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M/><!--


--><section begin=RELEASE_ZEUS_V1.0_DART-MX8M/><includeonly>
--><section begin=MCUXPRESSO_2.9.0_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Upgraded to NXP BSP release 5.4.24_2.1.0 ||
| Initial FreeRTOS 2.9.0 release for Cortex-M4 core of DART-MX8M
|-
|-
| Updated the mcp251xfd CAN FD driver to latest from git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git || A few errata fixes included
| '''Tests conducted on:'''
|-
|-
! Known Issues !! Status
| GPIO/LED
|-
|-
| A few of the older iMX8M rev. B0 SOCs have suspend/resume issues with the latest ATF version from NXP || 10/28/2020 update: Fixed in latest meta-variscite-imx revision
| I2C3
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_V1.0_DART-MX8M/><!--
|-
| PWM2
|-
| UART2
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.9.0_V1.0_DART-MX8M/><!--


 
--><section begin=MCUXPRESSO_2.10.0_V1.0_DART-MX8M/><includeonly>
--><section begin=RELEASE_ZEUS_V1.1_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Kernel: [{{#var:KERNEL_GIT_HTTP}}/commit/4456efea0a6d9acafbb5a95c4ba176d46e679758 imx8mq-var-dart: add driver for Thermal Monitoring Unit (tmu)] ||
| Initial FreeRTOS 2.10.0 release for Cortex-M4 core of DART-MX8M
|-
|-
| Kernel: [{{#var:KERNEL_GIT_HTTP}}/commit/e3d73e92f28e0505261295ac4eaf651a9a0127e1 imx8mq-var-dart: Update VDD_GPU voltage] || This solves GPU instability issues seen on a small percentage of SOMs
| '''Tests conducted on:'''
|-
|-
| Kernel: Add mcp251xfd Kernel documentation ||
| GPIO/LED:<br>LED7 for DT8CustomBoard 1.x<br> U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)
|-
|-
| meta-variscite-imx: [{{#var:META_VARISCITE_GIT_HTTP}}/commit/1efed0c4b35c92021a2e84a9cb10a2a5dc2a9ade linux-firmware: Update BT/WiFi firmware for bc43xx to 8.2.0.16] ||
| I2C3
|-
|-
| meta-variscite-imx: [{{#var:META_VARISCITE_GIT_HTTP}}/commit/ac9ba789ec9323de1087adfc8b0b2d8a47e2893b imx-atf: Fix the suspend/resume hang issue on imx8mq b0] ||
| PWM2
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| UART2
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.10.0_V1.0_DART-MX8M/><!--
| Upgraded to NXP BSP release 5.4.24_2.1.0 ||
|-
| Updated the mcp251xfd CAN FD driver to latest from git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git || A few errata fixes included
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_V1.1_DART-MX8M/><!--


 
--><section begin=MCUXPRESSO_2.11.1_V1.0_DART-MX8M/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Dunfell release for DART-MX8M
| Initial FreeRTOS 2.11.1 release for Cortex-M4 core of DART-MX8M
|-
|-
| Fixed occasional pulseaudio device initialization problems
| '''Tests conducted on:'''
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.0_DART-MX8M/><!--
 
 
--><section begin=RELEASE_DUNFELL_V1.1_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| GPIO/LED:<br>LED7 for DT8CustomBoard 1.x<br> U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| I2C3
|-
|-
| Added support for DT8MCustomBoard V2.0
| PWM2
|-
|-
| Removed support for DT8MCustomBoard V1.2 and below
| UART2
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.11.1_V1.0_DART-MX8M/><!--
 
--><section begin=MCUXPRESSO_2.12.1_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Dunfell release for DART-MX8M
| Initial FreeRTOS 2.12.1 release for Cortex-M4 core of DART-MX8M
|-
|-
| Fixed occasional pulseaudio device initialization problems
| '''Tests conducted on:'''
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.1_DART-MX8M/><!--
 
 
--><section begin=RELEASE_DUNFELL_V1.2_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
! Change List !! Description
| GPIO/LED:<br>U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
| I2C3
|-
|-
| Fixed capacitive touch on DT8MCustomBoard V1.x
| PWM2
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
| UART2
|-
|-
| Added support for DT8MCustomBoard V2.0
| ECSP1:<br>Tested with ECSP1 disabled in the m4 device tree
|-
|-
| Removed support for DT8MCustomBoard V1.2 and below
| QSPI:<br>Tested without QSPI device connected to the interface
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.12.1_V1.0_DART-MX8M/><!--
 
--><section begin=MCUXPRESSO_2.13.0_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
! Change List
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Dunfell release for DART-MX8M
| Initial FreeRTOS 2.13.0 release for Cortex-M4 core of DART-MX8M
|-
| '''Tests conducted on:'''
|-
| GPIO/LED:<br>U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)
|-
| I2C3
|-
| PWM2
|-
| UART2
|-
| ECSP1:<br>Tested with ECSP1 disabled in the m4 device tree
|-
|-
| Fixed occasional pulseaudio device initialization problems
| QSPI:<br>Tested without QSPI device connected to the interface
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.2_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.13.0_V1.0_DART-MX8M/><!--


 
--><section begin=MCUXPRESSO_2.15.0_V1.0_DART-MX8M/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span>
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
| Initial release || MCUXPRESSO 2.15.0 release for Cortex-M4 core of DART-MX8M
|-
|-
| Update Yocto meta layers to latest:
| '''Tests conducted on:''' ||
- GPIO/LED:U43.2 / R228 for DT8CustomBoard >= 2.0 (Use Oscilloscope to observe output signal)<br>
- I2C3<br>
- PWM2<br>
- UART2<br>
- ECSP1: Tested with ECSP1 disabled in the m4 device tree<br>
- QSPI: Tested without QSPI device connected to the interface<br>
|-
| '''Known Issues''' ||
|-
| The PWM demo does not work properly when running from U-Boot - it should be run from Linux || It stops working during Linux boot
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=MCUXPRESSO_2.15.0_V1.0_DART-MX8M/><!--


yocto/poky
--><section begin=RELEASE_ZEUS_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Upgraded to NXP BSP release 5.4.24_2.1.0 ||
|-
| Updated the mcp251xfd CAN FD driver to latest from git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git || A few errata fixes included
|-
! Known Issues !! Status
|-
| A few of the older iMX8M rev. B0 SOCs have suspend/resume issues with the latest ATF version from NXP || 10/28/2020 update: Fixed in latest meta-variscite-imx revision
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_V1.0_DART-MX8M/><!--


yocto/meta-freescale


oe/meta-openembedded
--><section begin=RELEASE_ZEUS_V1.1_DART-MX8M/><includeonly>
 
{| class="wikitable"
oe/meta-python2
|-
 
! Change List !! Description
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
|-
| linux-firmware: Update TI WL18xx BT service pack to v4.7 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
| Kernel: [{{#var:KERNEL_GIT_HTTP}}/commit/4456efea0a6d9acafbb5a95c4ba176d46e679758 imx8mq-var-dart: add driver for Thermal Monitoring Unit (tmu)] ||
|-
|-
| linux-firmware: Update TI WL18xx to WiFi FW 8.9.0.0.88 ||
| Kernel: [{{#var:KERNEL_GIT_HTTP}}/commit/e3d73e92f28e0505261295ac4eaf651a9a0127e1 imx8mq-var-dart: Update VDD_GPU voltage] || This solves GPU instability issues seen on a small percentage of SOMs
|-
|-
| sn65dsi83: Add optional "ti,even-odd-swap" device tree property to swap LVDS Channel A/B
| Kernel: Add mcp251xfd Kernel documentation ||
|-
|-
| Add PCIE PHY power regulator ||
| meta-variscite-imx: [{{#var:META_VARISCITE_GIT_HTTP}}/commit/1efed0c4b35c92021a2e84a9cb10a2a5dc2a9ade linux-firmware: Update BT/WiFi firmware for bc43xx to 8.2.0.16] ||
|-
|-
| Remove "hard-wired" PCIE0 controller property ||
| meta-variscite-imx: [{{#var:META_VARISCITE_GIT_HTTP}}/commit/ac9ba789ec9323de1087adfc8b0b2d8a47e2893b imx-atf: Fix the suspend/resume hang issue on imx8mq b0] ||
|-
|-
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
|-
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
| Upgraded to NXP BSP release 5.4.24_2.1.0 ||
|-
|-
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
| Updated the mcp251xfd CAN FD driver to latest from git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git || A few errata fixes included
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_ZEUS_V1.1_DART-MX8M/><!--
 
 
--><section begin=RELEASE_DUNFELL_V1.0_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Fixed capacitive touch on DT8MCustomBoard V1.x ||
| Initial Yocto Dunfell release for DART-MX8M
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| Fixed occasional pulseaudio device initialization problems
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.0_DART-MX8M/><!--
 
 
--><section begin=RELEASE_DUNFELL_V1.1_DART-MX8M/><includeonly>
{| class="wikitable"
|-
|-
| Added support for DT8MCustomBoard V2.0 ||
! Change List !! Description
|-
|-
| Removed support for DT8MCustomBoard V1.2 and below ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Added support for DT8MCustomBoard V2.0
|-
| Removed support for DT8MCustomBoard V1.2 and below
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
|-
| Initial Yocto Dunfell release for DART-MX8M ||
| Initial Yocto Dunfell release for DART-MX8M
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| Fixed occasional pulseaudio device initialization problems  
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.3_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.1_DART-MX8M/><!--




--><section begin=RELEASE_DUNFELL_V1.4_DART-MX8M/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.2_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span>
|-
|-
| Kernel: fix resume sequence with all PCIe cards ||
| Fixed capacitive touch on DT8MCustomBoard V1.x
|-
|-
| Kernel: ads7846: fix the pressure_max setting ||
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span>
|-
|-
| Kernel: sn65dsi83: allow swapping LVDS Channel A/B ||
| Added support for DT8MCustomBoard V2.0
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span>
| Removed support for DT8MCustomBoard V1.2 and below
|-
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span>
|-
| Initial Yocto Dunfell release for DART-MX8M
|-
| Fixed occasional pulseaudio device initialization problems
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.2_DART-MX8M/><!--
 
 
--><section begin=RELEASE_DUNFELL_V1.3_DART-MX8M/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span>
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
|-
|-
| Update Yocto meta layers to latest:
| Update Yocto meta layers to latest:
Line 1,391: Line 1,583:
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| Fixed occasional pulseaudio device initialization problems ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.4_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.3_DART-MX8M/><!--
 


--><section begin=RELEASE_DUNFELL_V1.5_DART-MX8M/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.4_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
Line 1,475: Line 1,662:
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| Fixed occasional pulseaudio device initialization problems ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.5_DART-MX8M/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.4_DART-MX8M/><!--


--><section begin=mx8m-yocto-dunfell-5.4-2.1.x-v1.6/><includeonly>
--><section begin=RELEASE_DUNFELL_V1.5_DART-MX8M/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
|-
| ''' Linux kernel updates:''' ||
| Kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
|-
| imx8mq_var_dart_defconfig: enable driver for ADIN PHY ||
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support
|-
|-
| imx8mq-var-dart: fec: add phy-reset-post-delay ||
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
|-
| imx8mq-var-dart: Update machine name ||
| Kernel: fix resume sequence with all PCIe cards ||
|-
|-
| net: phy: adin: add adi,phy-mode-override property ||
| Kernel: ads7846: fix the pressure_max setting ||
|-
|-
| imx8mq_var_dart_defconfig: add full docker support ||
| Kernel: sn65dsi83: allow swapping LVDS Channel A/B ||
|-
|-
| ''' U-Boot updates:''' ||
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span>
|-
|-
| imx8mq_var_dart: fec: add phy-reset-post-delay ||
| Updated Kernel from 5.4.85 to 5.4.142 ||
|-
|-
| variscite: eth: ADIN1300: Disable RGMII RX clock delay ||
| Update Yocto meta layers to latest:
|-
 
| ''' meta-variscite-fslc updates:''' ||
yocto/poky
|-
 
| pm-utils: Add Ethernet suspend/resume scripts for DART-MX8M ||
|-
| Remove bash dependency from Wi-Fi scripts ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Kernel: fix resume sequence with all PCIe cards ||
|-
| Kernel: ads7846: fix the pressure_max setting ||
|-
| Kernel: sn65dsi83: allow swapping LVDS Channel A/B ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span>
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
|-
| Update Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
yocto/meta-freescale


Line 1,585: Line 1,746:
|-
|-
| Fixed occasional pulseaudio device initialization problems ||
| Fixed occasional pulseaudio device initialization problems ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-dunfell-5.4-2.1.x-v1.6/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_DUNFELL_V1.5_DART-MX8M/><!--


--><section begin=mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
--><section begin=mx8m-yocto-dunfell-5.4-2.1.x-v1.6/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
 
--><section begin=RELEASE_10.0.0_2.3.0_GA_DART-MX8M_V1.2/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
| <span {{#var:STYLE_RELEASE}}>Release 1.6</span> ||
|-
| ''' Linux kernel updates:''' ||
|-
| imx8mq_var_dart_defconfig: enable driver for ADIN PHY ||
|-
|-
| Added support for DT8MCustomBoard V2.0 ||
| imx8mq-var-dart: fec: add phy-reset-post-delay ||
|-
|-
| Removed support for DT8MCustomBoard V1.2 and below ||
| imx8mq-var-dart: Update machine name ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
| net: phy: adin: add adi,phy-mode-override property ||
|-
|-
| | '''Android:''' ||
| imx8mq_var_dart_defconfig: add full docker support ||
|-
|-
| Updated bc43xx BT/WiFi firmware to Laird release 8.2.0.16 ||
| ''' U-Boot updates:''' ||
|-
|-
| | '''Kernel:''' ||
| imx8mq_var_dart: fec: add phy-reset-post-delay ||
|-
|-
| Updated VDD_GPU voltage  || This solves GPU instability issues seen on a small percentage of SOMs
| variscite: eth: ADIN1300: Disable RGMII RX clock delay ||
|-
|-
| | '''ATF:''' ||
| ''' meta-variscite-fslc updates:''' ||
|-
|-
| imx-atf: Fix the suspend/resume hang issue on imx8mq b0 ||
| pm-utils: Add Ethernet suspend/resume scripts for DART-MX8M ||
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
| Remove bash dependency from Wi-Fi scripts ||
|-
|-
| Android 10.0.0 v2.3.0 (kernel 5.4.24) for DART-MX8M ||
| <span {{#var:STYLE_RELEASE}}>Release 1.5</span> ||
|-
| Kernel: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
|-
| meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.4</span> ||
|-
| Kernel: fix resume sequence with all PCIe cards ||
|-
| Kernel: ads7846: fix the pressure_max setting ||
|-
| Kernel: sn65dsi83: allow swapping LVDS Channel A/B ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.3</span>
|-
| Updated Kernel from 5.4.85 to 5.4.142 ||
|-
| Update Yocto meta layers to latest:
 
yocto/poky
 
yocto/meta-freescale
 
oe/meta-openembedded
 
oe/meta-python2
 
freescale/meta-freescale-3rdparty
 
freescale/meta-freescale-distro
 
freescale/Documentation
 
QT5/meta-qt5
 
sbabic/meta-swupdate
 
yocto/meta-virtualization
 
varigit/meta-variscite-fslc
|-
| linux-firmware: Update TI WL18xx BT service pack to v4.7 ||
|-
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 ||
|-
| linux-firmware: Update TI WL18xx to WiFi FW 8.9.0.0.88 ||
|-
| sn65dsi83: Add optional "ti,even-odd-swap" device tree property to swap LVDS Channel A/B
|-
| Add PCIE PHY power regulator ||
|-
| Remove "hard-wired" PCIE0 controller property ||
|-
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
|-
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
|-
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
|-
| fsl-image-gui: Add libgpiod and libgpiod-tools ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Fixed capacitive touch on DT8MCustomBoard V1.x ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Added support for DT8MCustomBoard V2.0 ||
|-
| Removed support for DT8MCustomBoard V1.2 and below ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Initial Yocto Dunfell release for DART-MX8M ||
|-
| Fixed occasional pulseaudio device initialization problems ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-dunfell-5.4-2.1.x-v1.6/><!--
 
--><section begin=mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
{{#lst:YPC_DART-MX8M|RN_mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-yocto-hardknott-5.10.72_2.2.1-v1.0/><!--
 
--><section begin=RELEASE_10.0.0_2.3.0_GA_DART-MX8M_V1.2/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.2</span> ||
|-
| Added support for DT8MCustomBoard V2.0 ||
|-
| Removed support for DT8MCustomBoard V1.2 and below ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| | '''Android:''' ||
|-
| Updated bc43xx BT/WiFi firmware to Laird release 8.2.0.16 ||
|-
| | '''Kernel:''' ||
|-
| Updated VDD_GPU voltage  || This solves GPU instability issues seen on a small percentage of SOMs
|-
| | '''ATF:''' ||
|-
| imx-atf: Fix the suspend/resume hang issue on imx8mq b0 ||
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 10.0.0 v2.3.0 (kernel 5.4.24) for DART-MX8M ||
|-
| Updated the mcp251xfd CAN FD driver to latest from git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git || A few errata fixes included
|-
! Known Issues !!
|-
| DisplayPort hotplug not supported || DP is not supported by NXP Android BSP at all. Variscite Android BSP does support it, but currently without hotplug.
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.3.0_GA_DART-MX8M_V1.2/><!--
 
 
--><section begin=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 11.0.0 v1.0.0 (kernel 5.4.47) for DART-MX8M ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.0/><!--
 
 
--><section begin=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.1/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
|-
| Add PCIE PHY power regulator ||
|-
| Remove "hard-wired" PCIE0 controller property ||
|-
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
|-
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
|-
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 11.0.0 v1.0.0 (kernel 5.4.47) for DART-MX8M ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.1/><!--
 
--><section begin=mx8m-android-11.0.0_2.6.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
{{#lst:APC_DART-MX8M|RN_mx8m-android-11.0.0_2.6.0-v1.0}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-android-11.0.0_2.6.0-v1.0/><!--
--><section begin=mx8m-android-12.0.0_2.0.0-v1.0/><includeonly>
{| class="wikitable"
|-
! Change List !! Description
|-
|-
| Updated the mcp251xfd CAN FD driver to latest from git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git || A few errata fixes included
{{#lst:APC_DART-MX8M|RN_mx8m-android-12.0.0_2.0.0-v1.0}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-android-12.0.0_2.0.0-v1.0/><!--
! Known Issues !!
|-  
| DisplayPort hotplug not supported || DP is not supported by NXP Android BSP at all. Variscite Android BSP does support it, but currently without hotplug.
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_10.0.0_2.3.0_GA_DART-MX8M_V1.2/><!--


 
<!--
--><section begin=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.0/><includeonly>
--><section begin=mx8m-android-13.0.0_1.2.0-v1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
{{#lst:APC_DART-MX8M|RN_mx8m-android-13.0.0_1.2.0-v1.0}}
|-
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-android-13.0.0_1.2.0-v1.0/><!--
| Android 11.0.0 v1.0.0 (kernel 5.4.47) for DART-MX8M ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.0/><!--
 


--><section begin=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.1/><includeonly>
--><section begin=mx8m-android-13.0.0_1.2.0-v1.1/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
{{#lst:APC_DART-MX8M|RN_mx8m-android-13.0.0_1.2.0-v1.1}}
|-
{{#lst:APC_DART-MX8M|RN_mx8m-android-13.0.0_1.2.0-v1.0}}
| Add PCIE PHY power regulator ||
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-android-13.0.0_1.2.0-v1.1/><!--
|-
--><section begin=mx8m-android-13.0.0_1.2.0-v1.2/><includeonly>
| Remove "hard-wired" PCIE0 controller property ||
|-
| MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
|-
| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
|-
| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
|-
| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
|-
| Android 11.0.0 v1.0.0 (kernel 5.4.47) for DART-MX8M ||
|-
! Known Issues !!
|-
| WiFi hotspot SSID broadcast not working reliably || It is a known issue also on NXP's EVK
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.1/><!--
 
--><section begin=mx8m-android-11.0.0_2.6.0-v1.0/><includeonly>
{| class="wikitable"
{| class="wikitable"
|-
|-
! Change List !! Description
! Change List !! Description
|-
|-
{{#lst:APC_DART-MX8M|RN_mx8m-android-11.0.0_2.6.0-v1.0}}
{{#lst:APC_DART-MX8M|RN_mx8m-android-13.0.0_1.2.0-v1.2}}
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-android-11.0.0_2.6.0-v1.0/><!--
|}{{#vardefine:CHANGE_LOG_FOUND|true}}</includeonly><section end=mx8m-android-13.0.0_1.2.0-v1.2/><!--
 
--><section begin=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.2/><includeonly>
--><section begin=RELEASE_11.0.0_1.0.0_DART-MX8M_V1.2/><includeonly>
{| class="wikitable"
{| class="wikitable"

Latest revision as of 14:43, 4 November 2024


DART-MX8M Release Notes

Yocto warrior-fsl-4.19.35-mx8mq-v1.1

Release Notes

Based on release Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0
Release tag warrior-fsl-4.19.35-mx8mq-v1.1
Release manifest imx-4.19.35-1.1.0-var01.xml
Date 5/27/2020
Supported platforms DART-MX8M
SOM revision v1.1 and higher
File System build system Yocto Warrior
Recovery SD card link dart-mx8m-recovery-sd.v44a.img.gz

Relevant git Repositories

Source Repository Branch Commit ID
U-Boot https://github.com/varigit/uboot-imx imx_v2019.04_4.19.35_1.1.0-var01 f786e7bf9fd99050b158732e05e67ad34fdd9d2b
Kernel https://github.com/varigit/linux-imx imx_4.19.35_1.1.0_var01 1767ecabadca18a8a50057919ad4547b1021ff4d
meta-variscite-imx https://github.com/varigit/meta-variscite-imx warrior-imx-4.19.35-var01 150170c8f58138954e5f07f3095350a4d5e66e19


After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List
Release 1.1
Kernel updates
Fixed LCD shifting issue after resume
MLK-22694: arch64: dts: fsl-imx8mq: Move src for dsi nodes and add lcdif clock
MLK-22694: imx: nwl_dsi-imx: Move mipi resets for i.MX8MQ
Enable HDMI Audio
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0
Retrieved from "https://variwiki.com/index.php?title=DART-MX8M_Release_Notes&oldid=27379"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 4 November 2024, at 14:43.

© 2024 Variscite. All rights reserved