Wifi SystemdNetworkd

Warning: This page is designed to be used with a 'release' URL parameter.

This page is using the default release mx95-yocto-scarthgap-6.6.23_2.0.0-v1.0.
To view this page for a specific Variscite SoM and software release, please follow these steps:

1. Visit variwiki.com
2. Select your SoM
3. Select the software release

Wireless

DART-MX95 Overview

The DART-MX95 supports the following WiFi modules:

Module	Chipset	Features	Network Interface(s)
Sterling LWB	Cypress CYW4343W	802.11 b/g/n	wlan0
Sterling LWB5	Cypress CYW43353	802.11 ac/a/b/g/n,	wlan0
Murata LBEE5PL2DL	NXP IW611	802.11 a/ac/ax/b/g/n	wlan0, uap0, wfd0
Murata LBES5PL2EL	NXP IW612	802.11 a/ac/ax/b/g/n, 802.15.4	wlan0, uap0, wfd0

This guide demonstrates how to configure WiFi using systemd-networkd. It is important to use the correct network interface for the module assembled on your DART-MX95.

Managing WiFi using systemd-networkd

systemd-networkd is a system daemon that manages network configurations. It detects and configures network devices as they appear.
systemd-networkd's functionality can be useful for both wireless and wired networks.
This guide describes how to use systemd-networkd to configure wireless networks.

Enabling and disabling WiFi

To enable WiFi run

# networkctl up wlan0

To disable WiFi run

# networkctl down wlan0

Configuring WiFi Client

Scanning for available WiFi APs

If WiFi is enabled you can get the list of available APs by running

# iw dev wlan0 scan | grep SSID

Connecting to a protected WiFi network

Create /etc/systemd/network/80-wifi-station.network as following:

# cp /lib/systemd/network/80-wifi-station.network.example /etc/systemd/network/80-wifi-station.network

Append the following content to /etc/systemd/network/80-wifi-station.network:

"[DHCPv4]
"RouteMetric=9"
"[IPv6AcceptRA]"
"RouteMetric=9"

Create /etc/wpa_supplicant/wpa_supplicant-wlan0.conf with the following content:

"ctrl_interface=/var/run/wpa_supplicant"
"eapol_version=1"
"ap_scan=1"
"fast_reauth=1"
wpa_passphrase <SSID> <password>

Restart the services

# systemctl restart systemd-networkd.service
# systemctl restart wpa_supplicant@wlan0.service

Wait a few seconds and than make sure wlan0 is up and connected to the AP

# ifconfig wlan0

Configuring WiFi access point with hostapd

hostapd is a versatile tool for setting up a WiFi access point and generally offers more options and flexibility compared to NetworkManager.
For instance, hostapd enables the creation of a WiFi 6 access point, which is not currently possible with NetworkManager. udhcpd is a suitable option for providing DHCP services alongside hostapd. It's a lightweight DHCP server that can be easily integrated with hostapd.

Create /etc/hostapd.conf

The next step is to create /etc/hostapd.conf. The following table shows how to configure 802.11bgn, 802.11ac, and 802.11ax access points:

Wi-Fi 2.4GHz (802.11bgn) /etc/hostapd.conf	Wi-Fi 5 (802.11ac) /etc/hostapd.conf	Wi-Fi 6 (802.11ax) /etc/hostapd.conf
# /etc/hostapd.conf for 2.4 GHz (802.11b/g/n) # AP Net Interface interface=uap0 # 2.4 GHz hw_mode=g # Enable 802.11n (Wi-Fi 4) standard ieee80211n=1 wmm_enabled=1 # Demo was run in the US country_code=US # Our SSID ssid=Var_AP_2G # Automatically select the best channel # Notes about the LWB/LWB5 modules: # - For AP+STA, the channel must match the STA channel # - The LWB does not support auto channel selection. # We recommend using channel 1 channel=0	# /etc/hostapd.conf for Wi-Fi 5 (802.11ac)​ # AP Net Interface​ interface=uap0​ # 5 GHz​ hw_mode=a​ ​ # Enable 802.11ac (Wi-Fi 5) standard​ ieee80211ac=1​ wmm_enabled=1​ # Demo was run in the US​ country_code=US​ # Our SSID​ ssid=Var_AP_Wifi5 # Automatically select the best channel​ # Notes about the LWB/LWB5 modules: # - For AP+STA, the channel must match the STA channel # - The LWB5 does not support auto channel selection. # For LWB5, we recommend using channel 36. channel=0​	# /etc/hostapd.conf for Wi-Fi 6 (802.11ax)​ # AP Net Interface​ interface=uap0​ # 5 GHz​ hw_mode=a​ ​ # Enable 802.11ax (Wi-Fi 6) standard​ ieee80211ax=1 wmm_enabled=1​ # Demo was run in the US​ country_code=US​ # Our SSID​ ssid=Var_AP_Wifi6 # Automatically select the best channel​ channel=0​

Add the Control interface directory and group to /etc/hostapd.conf:

# Control interface directory and group
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0