Yocto Build U-Boot TI: Difference between revisions

From Variscite Wiki
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 65: Line 65:
Export variables for building U-Boot
Export variables for building U-Boot


  $ export PATH=$HOME/{{#var:armv7_toolchain}}/bin:$PATH && \
  $ export PATH=$HOME/{{#var:armv7_toolchain}}/bin:$PATH &&
   export PATH=$HOME/{{#var:armv8_toolchain}}/bin:$PATH && \{{#ifexpr: {{#var:YOCTO_VERSION}} < 4.1 |&nbsp;
   export PATH=$HOME/{{#var:armv8_toolchain}}/bin:$PATH && {{#ifexpr: {{#var:YOCTO_VERSION}} < 4.1 |&nbsp;
   export TI_SECURE_DEV_PKG={{#var:WORKDIR_ENV}}/{{#var:CORE_SECDEV_K3_REPO}} && \
   export TI_SECURE_DEV_PKG={{#var:WORKDIR_ENV}}/{{#var:CORE_SECDEV_K3_REPO}} &&  
   export K3IG_DIR={{#var:WORKDIR_ENV}}/{{#var:K3_IMAGE_GEN_REPO}} && \
   export K3IG_DIR={{#var:WORKDIR_ENV}}/{{#var:K3_IMAGE_GEN_REPO}} &&  
   export SYSFW_DIR={{#var:WORKDIR_ENV}}/{{#var:TI_LINUX_FIRMWARE_REPO}}/ti-sysfw && \
   export SYSFW_DIR={{#var:WORKDIR_ENV}}/{{#var:TI_LINUX_FIRMWARE_REPO}}/ti-sysfw &&  
   export DMFW_DIR={{#var:WORKDIR_ENV}}/{{#var:TI_LINUX_FIRMWARE_REPO}}/ti-dm/am62xx && \
   export DMFW_DIR={{#var:WORKDIR_ENV}}/{{#var:TI_LINUX_FIRMWARE_REPO}}/ti-dm/am62xx &&  
   | &nbsp;
   | &nbsp;
   export TI_LINUX_FW_DIR={{#var:WORKDIR_ENV}}/{{#var:TI_LINUX_FIRMWARE_REPO}} \
   export TI_LINUX_FW_DIR={{#var:WORKDIR_ENV}}/{{#var:TI_LINUX_FIRMWARE_REPO}} &&
   }}
   }}
   export UBOOT_DIR={{#var:WORKDIR_ENV}}/{{#var:U-BOOT_REPO}} && \
   export UBOOT_DIR={{#var:WORKDIR_ENV}}/{{#var:U-BOOT_REPO}} &&  
   export TFA_DIR={{#var:WORKDIR_ENV}}/{{#var:ATF_REPO}} && \
   export TFA_DIR={{#var:WORKDIR_ENV}}/{{#var:ATF_REPO}} &&  
   export OPTEE_DIR={{#var:WORKDIR_ENV}}/{{#var:OPTEE_REPO}}
   export OPTEE_DIR={{#var:WORKDIR_ENV}}/{{#var:OPTEE_REPO}}


Line 151: Line 151:
  U-Boot SPL {{#var:U-BOOT_TI_VER}}-g{{#var:U-BOOT_COMMIT_SHORT}} (Mar 23 2023 - 22:04:15 +0000)    <--- R5
  U-Boot SPL {{#var:U-BOOT_TI_VER}}-g{{#var:U-BOOT_COMMIT_SHORT}} (Mar 23 2023 - 22:04:15 +0000)    <--- R5
  U-Boot SPL {{#var:U-BOOT_TI_VER}}-g{{#var:U-BOOT_COMMIT_SHORT}} (Mar 23 2023 - 22:04:15 +0000)    <--- A53
  U-Boot SPL {{#var:U-BOOT_TI_VER}}-g{{#var:U-BOOT_COMMIT_SHORT}} (Mar 23 2023 - 22:04:15 +0000)    <--- A53
  U-Boot {{#var:U-BOOT_TI_VER}}-gaa251b91f7 (Mar 24 2023 - 16:25:35 -0500)        <--- A53
  U-Boot {{#var:U-BOOT_TI_VER}}-g{{#var:U-BOOT_COMMIT_SHORT}} (Mar 24 2023 - 16:25:35 -0500)        <--- A53


=== Update U-Boot on an SD Card ===
=== Update U-Boot on an SD Card ===

Latest revision as of 13:32, 1 October 2024

Warning: This page is designed to be used with a 'release' URL parameter.

This page is using the default release am62-yocto-kirkstone-6.1.46_09.01.00.08-v1.0.
To view this page for a specific Variscite SoM and software release, please follow these steps:

  1. Visit variwiki.com
  2. Select your SoM
  3. Select the software release
Yocto Build U-Boot from source code

Introduction

This guide walks through the process for manually building and installing the U-Boot images from source. It is derived from TI's Build U-Boot guide

Installing required packages

Install the required packages documented in the Build Yocto from source code guide.

Building U-boot requires Python 3.10 or newer, which is shipped with Ubuntu 22.04.

In addition to Python 3.10, the following python3 modules are required for binman: 

$ pip3 install jsonschema pyelftools

Fetch source code and install dependencies

This section describes the one time process to install the toolchains and fetch the necessary source code for building U-Boot.

Install Toolchains to home directory

$ cd ~
$ wget https://developer.arm.com/-/media/Files/downloads/gnu/11.3.rel1/binrel/arm-gnu-toolchain-11.3.rel1-x86_64-arm-none-linux-gnueabihf.tar.xz && \
   tar -Jxvf arm-gnu-toolchain-11.3.rel1-x86_64-arm-none-linux-gnueabihf.tar.xz -C $HOME && \
   wget https://developer.arm.com/-/media/Files/downloads/gnu/11.3.rel1/binrel/arm-gnu-toolchain-11.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz && \
   tar -Jxvf arm-gnu-toolchain-11.3.rel1-x86_64-aarch64-none-linux-gnu.tar.xz -C $HOME

Fetch Source Code

Setup a working directory 

$ export WORKDIR=~/am62x-var-som-u-boot
$ mkdir $WORKDIR

Fetch the U-Boot source: 

$ cd $WORKDIR
$ git clone https://github.com/varigit/ti-u-boot -b ti-u-boot-2023.04_var01 ti-u-boot

Fetch ti-linux-firmware: 

$ cd $WORKDIR
$ git clone https://git.ti.com/git/processor-firmware/ti-linux-firmware -b ti-linux-firmware ti-linux-firmware
$ cd ti-linux-firmware && \
  git checkout 9ee2fedb1fb4815f54310dd872d34faf9948c7c1 && \
  cd ../

Fetch arm-trusted-firmware: 

$ cd $WORKDIR
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a -b master trusted-firmware-a
$ cd trusted-firmware-a && \
  git checkout d7a7135d32a8c7da004c0c19b75bd4e2813f9759 && \
  cd ../

Fetch optee-os: 

$ cd $WORKDIR
$ git clone https://github.com/OP-TEE/optee_os -b master optee_os
$ cd optee_os && \
  git checkout 2a5b1d1232f582056184367fb58a425ac7478ec6 && \
  cd ../

Build U-Boot out of Yocto tree

After fetching the source code and installing dependencies, you may return to $WORKDIR anytime and follow these steps to build U-Boot:

Setup the environment

Export the working directory 

$ export WORKDIR=~/am62x-var-som-u-boot

Export variables for building U-Boot 

$ export PATH=$HOME/arm-gnu-toolchain-11.3.rel1-x86_64-arm-none-linux-gnueabihf/bin:$PATH &&
  export PATH=$HOME/arm-gnu-toolchain-11.3.rel1-x86_64-aarch64-none-linux-gnu/bin:$PATH &&  
  export TI_LINUX_FW_DIR=$WORKDIR/ti-linux-firmware &&
  export UBOOT_DIR=$WORKDIR/ti-u-boot && 
  export TFA_DIR=$WORKDIR/trusted-firmware-a && 
  export OPTEE_DIR=$WORKDIR/optee_os

Build Images

ATF 

$ cd $TFA_DIR
$ make -j$(nproc) ARCH=aarch64 CROSS_COMPILE=aarch64-none-linux-gnu- PLAT=k3 TARGET_BOARD=lite SPD=opteed

OP-TEE 

$ cd $OPTEE_DIR
$ make -j$(nproc) CROSS_COMPILE64=aarch64-none-linux-gnu- CROSS_COMPILE32=arm-none-linux-gnueabihf- PLATFORM=k3-am62x CFG_ARM64_core=y

U-Boot R5 Images

Optional - Modify am62x_var_som_r5_defconfig: 

$ cd $WORKDIR/ti-u-boot
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- am62x_var_som_r5_defconfig O=$UBOOT_DIR/out/r5
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- O=$UBOOT_DIR/out/r5 menuconfig
... make and save some changes ... 
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- O=$UBOOT_DIR/out/r5 savedefconfig
$ cp out/r5/defconfig configs/am62x_var_som_r5_defconfig

Build u-boot-spl.bin for tiboot3.bin. Saved in $UBOOT_DIR/out/r5: 

$ cd $WORKDIR/ti-u-boot
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- am62x_var_som_r5_defconfig O=$UBOOT_DIR/out/r5
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- O=$UBOOT_DIR/out/r5 BINMAN_INDIRS=$TI_LINUX_FW_DIR


Note:

The AM62 SOC has multiple variants (GP, HS-FS, HS-SE). For more information, see: Device types Early Variscite VAR-SOM-AM62 samples were shipped with the GP variant.

U-Boot A53 Images

Optional - Modify am62x_var_som_a53_defconfig: 

$ cd $WORKDIR/ti-u-boot
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- am62x_var_som_a53_defconfig O=$UBOOT_DIR/out/a53
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- O=$UBOOT_DIR/out/a53 menuconfig
 ... make and save some changes ... 
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- O=$UBOOT_DIR/out/a53 savedefconfig
$ cp out/a53/defconfig configs/am62x_var_som_a53_defconfig

Build tispl.bin and u-boot.img. Saved in $UBOOT_DIR/out/a53. Requires bl31.bin, tee-pager_v2.bin, and ipc_echo_testb_mcu1_0_release_strip.xer5f. 

$ cd $WORKDIR/ti-u-boot
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- am62x_var_som_a53_defconfig O=$UBOOT_DIR/out/a53
$ make -j$(nproc) ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- \
     BL31=$TFA_DIR/build/k3/lite/release/bl31.bin \
     TEE=$OPTEE_DIR/out/arm-plat-k3/core/tee-pager_v2.bin \
     O=$UBOOT_DIR/out/a53 BINMAN_INDIRS=$TI_LINUX_FW_DIR

Update U-Boot on running system

To update U-Boot on an existing system, the following SPL and U-Boot images need to be installed to the boot partition of the boot media (eMMC or SD): 

$UBOOT_DIR/out/r5/tiboot3.bin
$UBOOT_DIR/out/a53/tispl.bin
$UBOOT_DIR/out/a53/u-boot.img

After updating the boot media, boot U-Boot and verify the commit ids of the R5 SPL, A53 SPL, and A53 U-Boot match the output of git rev-parse HEAD. For example: 

$ cd $UBOOT_DIR && git rev-parse HEAD
a526abbae21127ac1e79cfc74adb21db97759fdf

Verify this matches the versions printed by U-Boot: 

U-Boot SPL 2023.04-ga526abbae2 (Mar 23 2023 - 22:04:15 +0000)    <--- R5
U-Boot SPL 2023.04-ga526abbae2 (Mar 23 2023 - 22:04:15 +0000)    <--- A53
U-Boot 2023.04-ga526abbae2 (Mar 24 2023 - 16:25:35 -0500)        <--- A53

Update U-Boot on an SD Card

To update U-Boot on an SD Card, copy the files to the sd card.

  • Mount the SD card boot partition on your host computer and verify the previous U-Boot files are installed:
$ mkdir ~/.sdcard
$ sudo mount /dev/sdX ~/.sdcard
$ ls ~/.sdcard
tiboot3.bin  tispl.bin  u-boot.img  uEnv.txt
  • Copy the new files and umount the SD card:
$ sudo cp $UBOOT_DIR/out/r5/tiboot3.bin $UBOOT_DIR/out/a53/tispl.bin $UBOOT_DIR/out/a53/u-boot.img ~/.sdcard
$ sudo umount ~/.sdcard && sync
  • Boot the SD card and verify the R5 SPL, A53 SPL, and A53 U-Boot match the output of git rev-parse HEAD

Update U-Boot using UMS

U-Boot can be updated by using the USB Mass Storage gadget to mount the eMMC or SD card on your host computer.

  • Connect the USB OTG port to host computer.
  • Start the VAR-SOM-AM62 and interrupt U-Boot
  • Start UMS on eMMC:
u-boot> ums 0 mmc 1
  • Or...start UMS on SD card:
u-boot> ums 0 mmc 2
  • Or...start UMS on the current boot device:
u-boot> ums 0 mmc $mmcdev
  • Mount the SD card boot partition and verify the previous U-Boot files are installed:
$ mkdir ~/.sdcard
$ sudo mount /dev/sdX ~/.sdcard
$ ls ~/.sdcard
tiboot3.bin  tispl.bin  u-boot.img  uEnv.txt
  • Copy the new files and umount the SD card:
$ sudo cp $UBOOT_DIR/out/r5/tiboot3.bin $UBOOT_DIR/out/a53/tispl.bin $UBOOT_DIR/out/a53/u-boot.img ~/.sdcard
$ sudo umount ~/.sdcard && sync
  • Boot the SD card and verify the R5 SPL, A53 SPL, and A53 U-Boot match the output of git rev-parse HEAD

Update U-Boot using Ethernet

U-Boot can be updated on a running system by using scp to transfer the files:

  • Mount the eMMC boot partition and verify the previous U-Boot files are installed:
# mount /dev/mmcblk0p1 /mnt/
# ls /mnt
tiboot3.bin  tispl.bin  u-boot.img  uEnv.txt
  • Transfer the new files:
$ scp $UBOOT_DIR/out/r5/tiboot3.bin $UBOOT_DIR/out/a53/tispl.bin $UBOOT_DIR/out/a53/u-boot.img root@<ip address>:/mnt/
  • Reboot the VAR-SOM-AM62 and verify the R5 SPL, A53 SPL, and A53 U-Boot match the output of git rev-parse HEAD
Retrieved from "https://variwiki.com/index.php?title=Yocto_Build_U-Boot_TI&oldid=27081"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 1 October 2024, at 13:32.

© 2024 Variscite. All rights reserved