DART-6UL CAN bus: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{PageHeader|CAN bus}} | {{PageHeader|CAN bus}} | ||
{{DocImage|category1=Yocto|category2=DART-6UL | {{DocImage|category1=Yocto|category2=Debian}}[[category:DART-6UL]] | ||
Connect 2 boards: | Connect 2 boards: | ||
| Line 20: | Line 20: | ||
! scope="row"| CAN-L | ! scope="row"| CAN-L | ||
| J12.10 | | J12.10 | ||
| J26. | | J26.19 | ||
| J16.18 | | J16.18 | ||
|} | |} | ||
Latest revision as of 21:21, 22 February 2024
CAN bus
Connect 2 boards:
- CAN-H of the first board to CAN-H of the second board
- CAN-L of the first board to CAN-L of the second board
| pins | 6UL Custom Board | Concerto Board | Symphony Board |
|---|---|---|---|
| CAN-H | J12.9 | J26.17 | J16.20 |
| CAN-L | J12.10 | J26.19 | J16.18 |
Set up the 2 boards by running the following on each of them:
# ip link set can0 up type can bitrate 125000
On board #1, read data:
# candump can0
On board #2, send data:
# cansend can0 500#1E.10.10 # cansend can0 500#1A.11.12 …