Template:HOSTAPD ACCESS POINT

Configuring WiFi Access Point with hostapd

hostapd is a versatile tool for setting up a WiFi Access Point and generally offers more options and flexibility compared to NetworkManager. For instance, hostapd enables the creation of a WiFi 6 Access Point, which is not currently possible with NetworkManager.

While NetworkManager facilitates complete automation of WiFi, DHCP server, and NAT configuration, hostapd provides more granular control over these settings, making it a preferred choice for advanced configurations.

dnsmasq is a suitable option for providing DHCP and DNS services alongside hostapd. It's a lightweight DNS forwarder and DHCP server that can be easily integrated with hostapd.

hostapd: Make sure interface is not managed by NetworkManager

Before starting with hostapd, it's important that NetworkManager is not managing the access point interface (uap0). If NetworkManager is running, make sure uap0 is unmanaged:

# /etc/NetworkManager/conf.d/99-iw61x-unmanaged-devices.conf
[keyfile]
unmanaged-devices=interface-name:uap0;

hostapd: Create /etc/hostapd.conf

The next step is to create /etc/hostapd.conf. The following table shows how to configure 802.11bgn, 802.11ac, and 802.11ax access points:

Wi-Fi 2.4GHz (802.11bgn) /etc/hostapd.conf	Wi-Fi 5 (802.11ac) /etc/hostapd.conf	Wi-Fi 6 (802.11ax) /etc/hostapd.conf
# /etc/hostapd.conf for 2.4 GHz (802.11b/g/n) # AP Net Interface interface=uap0 # 2.4 GHz hw_mode=g # Enable 802.11n (Wi-Fi 4) standard ieee80211n=1 wmm_enabled=1 # Demo was run in the US country_code=US # Our SSID ssid=Var_AP_2G # Automatically select the best channel # Notes about the LWB/LWB5 modules: # - For AP+STA, the channel must match the STA channel # - The LWB does not support auto channel selection. # We recommend using channel 1 channel=0	# /etc/hostapd.conf for Wi-Fi 5 (802.11ac)​ # AP Net Interface​ interface=uap0​ # 5 GHz​ hw_mode=a​ ​ # Enable 802.11ac (Wi-Fi 5) standard​ ieee80211ac=1​ wmm_enabled=1​ # Demo was run in the US​ country_code=US​ # Our SSID​ ssid=Var_AP_Wifi5 # Automatically select the best channel​ # Notes about the LWB/LWB5 modules: # - For AP+STA, the channel must match the STA channel # - The LWB5 does not support auto channel selection. # For LWB5, we recommend using channel 36. channel=0​	# /etc/hostapd.conf for Wi-Fi 6 (802.11ax)​ # AP Net Interface​ interface=uap0​ # 5 GHz​ hw_mode=a​ ​ # Enable 802.11ax (Wi-Fi 6) standard​ ieee80211ax=1 wmm_enabled=1​ # Demo was run in the US​ country_code=US​ # Our SSID​ ssid=Var_AP_Wifi6 # Automatically select the best channel​ channel=0​