DART-SD800 Android DG: Difference between revisions
From Variscite Wiki
(Created page with "Under construction") |
No edit summary |
||
| Line 1: | Line 1: | ||
{{PageHeader|VAR-SOM-MX6 - Yocto fsl-L3.10.53-1.1.0 Daisy R7}} {{DocImage|category1=VAR-SOM-MX6|category2=Yocto}} __toc__ | |||
= Introduction = | |||
* This Android release is based on Android KitKat 4.4.2<br/> | |||
* Linux kernel: 3.4 | |||
* Release 1 | |||
= Supported hardware and features = | |||
{| class="wikitable" | |||
|- | |||
! scope="col" | Feature<br/> | |||
! scope="col" | Description<br/> | |||
|- | |||
| Board support<br/> | |||
| [http://www.variscite.com/products/evaluation-kits/var-dvk-mx6 VAR-DVK-MX6],[http://www.variscite.com/products/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6 VAR-SOM-MX6]<br/> | |||
|- | |||
| CPU<br/> | |||
| | |||
[http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&fr=g i.MX6 Quad]<br/>[http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6D&fr=g i.MX6 Dual]<br/>[http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6DL&fr=g i.MX6 Dual lite]<br/>[http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6S&nodeId=018rH3ZrDRB24A i.MX6 Solo] | |||
|- | |||
| Software platform<br/> | |||
| | |||
[https://wiki.yoctoproject.org/wiki/Releases Yocto Daisy release.]<br/>[http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&fpsp=1&tab=Design_Tools_Tab Freescale release version 4.1]<br/>[https://github.com/Freescale Meta freescale community release for Daisy] | |||
|- | |||
| Nand Recovery<br/> | |||
| Version 36<br/> | |||
| | |||
|- | |||
| NAND Flash size support<br/> | |||
| 128MB up to 1GB<br/> | |||
|- | |||
| eMMC<br/> | |||
| up to 64GB<br/> | |||
|- | |||
| DDR size support configuration<br/> | |||
| Solo:up to 1GB. DualLite, Dual, Quad: up to 4GB <br/> | |||
|- | |||
| SD-Card<br/> | |||
| +<br/> | |||
|- | |||
| Ethernet<br/> | |||
| 10/100/1000 Mbps Ethernet<br/> | |||
|- | |||
| WLAN <br/> | |||
| Support for Wilink8, Dual band 5.0ghz + MIMO b/g/n<br/> | |||
|- | |||
| Bluetooth<br/> | |||
| 4.0 <br/> | |||
|- | |||
| CAN bus<br/> | |||
| +<br/> | |||
|- | |||
| I2C<br/> | |||
| +<br/> | |||
|- | |||
| SPI<br/> | |||
| +<br/> | |||
|- | |||
| USB host<br/> | |||
| +<br/> | |||
|- | |||
| USB OTG<br/> | |||
| Device / Host<br/> | |||
|- | |||
| Uarts<br/> | |||
| x3, up to 3.6 Mbps. Minicom avilable to use with the port<br/> | |||
|- | |||
| RTC<br/> | |||
| +<br/> | |||
|- | |||
| Display | |||
| HDMI 720P,1080P LVDS0 (On board LVDS to RGB bridge, EVK supports 800x480 resolution) LVDS1 external display | |||
|- | |||
| Audio | |||
| Line IN/ Line out | |||
|- | |||
| Camera | |||
| ov5640 camera sensor. CB402 board can be purchased separately | |||
|- | |||
| SATA | |||
| + | |||
|} | |||
= Installing required packages<br/> = | |||
No packages are required to install. | |||
Variscite provides a full VMware (TM) virtual machine, with repo pre-downloaded and all patches included. | |||
= Build Android tree = | |||
Follow the below commands: | |||
<pre> | |||
export PATH=/opt/jdk6/jdk1.6.0_45/bin:$PATH | |||
export JAVA_HOME=/opt/jdk6/jdk1.6.0_45/ | |||
export ANDROID_JAVA_HOME=/opt/jdk6/jdk1.6.0_45/ | |||
export PATH=/home/variscite/workdir/Source_Package/APQ8074_LNX.LA.3.5-01620-8x74.0_KK_V22/out/host/linux-x86/bin:$PATH | |||
cd ~/workdir/Source_Package/APQ8074_LNX.LA.3.5-01620-8x74.0_KK_V22/ | |||
source build/envsetup.sh | |||
lunch msm8974-userdebug | |||
make BUILD_ID=APQ8074_KK_V22 | |||
</pre> | |||
= Build bootimage only = | |||
Follow above instructions, but replace: | |||
make BUILD_ID=APQ8074_KK_V22 | |||
with | |||
make BUILD_ID=APQ8074_KK_V22 bootimage | |||
Revision as of 12:55, 25 February 2015
VAR-SOM-MX6 - Yocto fsl-L3.10.53-1.1.0 Daisy R7
Introduction
- This Android release is based on Android KitKat 4.4.2
- Linux kernel: 3.4
- Release 1
Supported hardware and features
| Feature |
Description | |
|---|---|---|
| Board support |
VAR-DVK-MX6,VAR-SOM-MX6 | |
| CPU |
||
| Software platform |
Yocto Daisy release. | |
| Nand Recovery |
Version 36 |
|
| NAND Flash size support |
128MB up to 1GB | |
| eMMC |
up to 64GB | |
| DDR size support configuration |
Solo:up to 1GB. DualLite, Dual, Quad: up to 4GB | |
| SD-Card |
+ | |
| Ethernet |
10/100/1000 Mbps Ethernet | |
| WLAN |
Support for Wilink8, Dual band 5.0ghz + MIMO b/g/n | |
| Bluetooth |
4.0 | |
| CAN bus |
+ | |
| I2C |
+ | |
| SPI |
+ | |
| USB host |
+ | |
| USB OTG |
Device / Host | |
| Uarts |
x3, up to 3.6 Mbps. Minicom avilable to use with the port | |
| RTC |
+ | |
| Display | HDMI 720P,1080P LVDS0 (On board LVDS to RGB bridge, EVK supports 800x480 resolution) LVDS1 external display | |
| Audio | Line IN/ Line out | |
| Camera | ov5640 camera sensor. CB402 board can be purchased separately | |
| SATA | + |
Installing required packages
No packages are required to install. Variscite provides a full VMware (TM) virtual machine, with repo pre-downloaded and all patches included.
Build Android tree
Follow the below commands:
export PATH=/opt/jdk6/jdk1.6.0_45/bin:$PATH export JAVA_HOME=/opt/jdk6/jdk1.6.0_45/ export ANDROID_JAVA_HOME=/opt/jdk6/jdk1.6.0_45/ export PATH=/home/variscite/workdir/Source_Package/APQ8074_LNX.LA.3.5-01620-8x74.0_KK_V22/out/host/linux-x86/bin:$PATH cd ~/workdir/Source_Package/APQ8074_LNX.LA.3.5-01620-8x74.0_KK_V22/ source build/envsetup.sh lunch msm8974-userdebug make BUILD_ID=APQ8074_KK_V22
Build bootimage only
Follow above instructions, but replace: make BUILD_ID=APQ8074_KK_V22 with make BUILD_ID=APQ8074_KK_V22 bootimage