VAR-SOM-MX7 ADC: Difference between revisions
From Variscite Wiki
(Created page with "{{PageHeader|VAR-SOM-MX7 - ADC}} {{DocImage|category1=VAR-SOM-MX7|category2=Yocto}} __toc__ ADC2 has 4 channels connected to pin J10.<br> It has pull-up to '''1.8V''' (This is...") |
(Add category Debian) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{PageHeader|VAR-SOM-MX7 - ADC}} {{DocImage|category1=VAR-SOM-MX7 | {{PageHeader|VAR-SOM-MX7 - ADC}} {{DocImage|category1=Yocto|category2=Debian}} [[category:VAR-SOM-MX7]] __toc__ | ||
ADC2 has 4 channels connected to | ADC2 has 4 channels connected to pins 2, 4, 6, 8 on the J10 connector.<br> | ||
It | It is limited to '''1.8V''' (this is a limitation of the iMX7 SoC).<br> | ||
To read their values: | To read their values: | ||
<pre> | <pre> | ||
Latest revision as of 18:45, 6 June 2023
VAR-SOM-MX7 - ADC
ADC2 has 4 channels connected to pins 2, 4, 6, 8 on the J10 connector.
It is limited to 1.8V (this is a limitation of the iMX7 SoC).
To read their values:
# cd /sys/bus/iio/devices/iio:device1 # cat in_voltage[0-3]_raw