DART-MX8M Debian

DART-MX8M Debian Buster 10

• 

Debian project is a Linux distributions for embedded devices. Debian big varities of pre-built packages and easy to customization provides rapid prototyping with minimal efforts. This release is based on NXP BSP from Yocto and Debian 10 core libraries. Variscite adds packages and configuration support its DART-MX8M System On Module.
Release version: buster-4.14.78-mx8m-v2.0

General

General

• First Time? Start Here
• Using the recovery SD card

Programming

• Hello World 'C' application
• TFTP & NFS

Support

• Variscite Customer Portal
  Register at Variscite Customer Portal to get high quality engineering support for Variscite products

Build

Build Debian, Linux and U-Boot

• Release Notes
• Setting a Development Environment
• Build Debian from source code
• Customizing U-Boot
• Customizing the Linux kernel
• Replace the Linux logo
• Booting from USB using UUU (Universal Update Utility)

How-to

Test and use an Interface

• Audio
• Backlight
• Bluetooth
• Bluetooth A2DP
• Bluetooth file transfer
• Bluetooth Low Energy

• OV5640 Camera
• CAN bus
• CPU freq. and number of cores
• Display
• Ethernet
• GPIO
• I2C
• RTC
• SPI
• Static IP address
• Suspend
• UART
• USB Host
• USB OTG
• User Button
• Video streaming - Playback/Capture
• Watchdog
• WiFi

Notes:

• In any "How-to" steps where manual steps to be executed on the target are mentioned, either the serial port or via ssh.
• If a certain interface require changes in the kernel code, then after those changes are done the kernel image and device tree dtbs needs to be rebuilt and flashed on the SOM.

To the top