Debian DART-MX8M CSI: Difference between revisions
From Variscite Wiki
(Created page with "<!-- Set release according to "release" parameter in URL and use RELEASE_BUSTER_V1.0_DART-MX8M-MINI as default --> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- --> {{...") |
No edit summary |
||
| Line 11: | Line 11: | ||
and rest of the commands }} | and rest of the commands }} | ||
On Target: | On Target: | ||
#apt-get clean;apt-get update; apt-get install -y v4l-utils | # apt-get clean; apt-get update; apt-get install -y v4l-utils | ||
== Camera Probe == | == Camera Probe == | ||
Latest revision as of 17:47, 7 February 2023
DART-MX8M-MINI Camera
Testing MIPI-CSI2 cameras
Before running any of the pipelines below make sure you have camera(s) connected. i.MX family of processors uses gstreamer as multimedia framework. Please refer to https://gstreamer.freedesktop.org/
Note: If your rootfs doesn't have v4l-utils you can run below command to test the camera
and rest of the commands
On Target:
# apt-get clean; apt-get update; apt-get install -y v4l-utils
Camera Probe
Run the following command to see if you have the camera(s) detected
# v4l2-ctl --list-devices
This should produce the following output
# v4l2-ctl --list-devices
i.MX6S_CSI (platform:32e20000.csi1_bridge):
/dev/video0
As you can see above there is 1 camera accessible as /dev/video0
Testing Camera Preview on Display
- 480P 640x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=640,height=480 ! autovideosink sync=false
- NTSC 720x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=720,height=480 ! autovideosink sync=false
- 720P 1280x720@30fps:
# gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=1280,height=720 ! autovideosink sync=false
- 1080P: 1920x1080@30fps:
# gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=1920,height=1080 ! autovideosink sync=false
- QSXGA 2592x1944@15fps:
# gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=2592,height=1944 ! autovideosink sync=false
Testing Camera JPEG Snapshot
To capture JPEG snapshot run one of the pipelines below depending upon the required picture resolution.
- 480P 640x480:
# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! video/x-raw,width=640,height=480 ! jpegenc ! filesink location=/tmp/test.jpg
- NTSC 720x480:
# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! video/x-raw,width=720,height=480 ! jpegenc ! filesink location=/tmp/test.jpg
- 720P 1280x720:
# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! video/x-raw,width=1280,height=720 ! jpegenc ! filesink location=/tmp/test.jpg
- 1080P 1920x1080:
# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! video/x-raw,width=1920,height=1080 ! jpegenc ! filesink location=/tmp/test.jpg
- QSXGA 2592x1944:
# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg