Latest revision as of 09:38, 8 November 2022

VAR-SOM-AM33 - First Time? Start Here.

Step One: Read Documentations

Please download and read the development kit documentation. on Variscite website:
http://www.variscite.com/products/system-on-module-som/cortex-a8/var-som-am33-cpu-ti-am335x-am3354-am3352

NOTE:
Make sure you read the Quick Start Guide.

Step Two: Setup Linux host PC Development Environment

Set up your development environment.

Setting Development Environment

Step Three: DVK Power Up

Power up the board.
You should have the serial cable connected to the debug port, as describe in the quick start guide
When board boots, make sure you see the u-boot prints on your host PC hyper terminal. You will need to type-in commands in the command prompt late in the development stages

IMPORTANT:
Don't continue without the serial console operating.

Step Four: A quick test with NAND recovery SD card

Please follow the below guide to boot DVK with a bootable SD card , and burn a complete yocto into NAND-Flash

NAND recovery SD card.

Step Five: What next?

Your next step can be one of :

Build a complete Yocto. This guide will help you build a complete Yocto build, resulting in all required binaries to create a full bootable Yocto SD card, and all required binaries to burn to NAND-Flash.
- Yocto common build errors

Use your pre-built rescue recovery SD card, as-is, to boot the system, and start applications programming. email support@variscite.com for FTP credentials.
- Application debugging with Eclipse

Test various interfaces : go to 'How to' section in main page.

Contact Support
- support@variscite.com

@@ Line 2: / Line 2: @@
 [[File:Yocto.png|x300px]]
 = Step One: Read Documentations =
-Please download and read the development kit documentation. on Variscite website:
+Please download and read the development kit documentation. on Variscite website:<br>
 http://www.variscite.com/products/system-on-module-som/cortex-a8/var-som-am33-cpu-ti-am335x-am3354-am3352 <br>
 {{note| NOTE:<br>Make sure you read the Quick Start Guide.|info}}
@@ Line 16: / Line 16: @@
 {{note| IMPORTANT:<br>Don't continue without the serial console operating.|info}}
-= Step Four: A quick test with NAND recovery SD-Card=
+= Step Four: A quick test with NAND recovery SD card=
-Please follow the below guide to boot DVK with a bootable SD-Card , and burn a complete yocto into NAND-Flash
+Please follow the below guide to boot DVK with a bootable SD card , and burn a complete yocto into NAND-Flash
-* [[VAR-SOM-MX6 Yocto NAND Recovery| NAND recovery SD-Card]]
+* [[VAR-SOM-AM33 Yocto NAND Recovery| NAND recovery SD card]].
 = Step Five: What next?=
 Your next step can be one of :
-* [[VAR-SOM-MX6 Yocto Fido R2 Build Yocto release|Build a complete Yocto]]. This guide will help you build a complete Yocto build, resulting in all required binaries to create a full bootable Yocto SD-Card, and all required binaries to burn to NAND-Flash.
+* [[VAR-SOM-AM33 Yocto Krogoth Build |Build a complete Yocto]]. This guide will help you build a complete Yocto build, resulting in all required binaries to create a full bootable Yocto SD card, and all required binaries to burn to NAND-Flash.
 ** [[VAR-SOM-MX6_Yocto Common Errors|Yocto common build errors</span>]]
-* Use your pre-built rescue recovery SD-Card, as-is, to boot system, and start doing applications programming.
+* Use your pre-built rescue recovery SD card, as-is, to boot the system, and start applications programming. email support@variscite.com for FTP credentials.
-** [[VAR-SOM-MX6 Hello World|Hello World 'C' application]]
+**[[VAR-SOM-AM33 Linux SDK 7 Basic debug with Eclipse| Application debugging with Eclipse]]
-** [[VAR-SOM-MX6 QT Hello World|Building A QT Hello World]]
-** [[VAR-SOM-MX6 Yocto GS eclipse v3|Debugging with Eclipse]]
-** [[VAR-SOM-MX6 Yocto Utilizing|TFTP & NFS]]
-* Test various interfaces.
+* Test various interfaces : go to 'How to' section in main page.
-** [[VAR-SOM-MX6 GPIO|GPIO]]
-** [[VAR-SOM-MX6 Ethernet|Ethernet]]
-** [[VAR-SOM-MX6 Audio record play|Audio record/play]]
-** [[VAR-SOM-MX6 Can-bus|Can-bus]]
-** [[VAR-SOM-MX6 USB Host|USB Host]]
-** [[VAR-SOM-MX6 eMMC|eMMC]]
-** [[VAR-SOM-MX6 RTC|RTC]]
-** [[VAR-SOM-MX6 LVDS|LVDS]]
-** [[VAR-SOM-MX6 I2C|I2C]]
-** [[VAR-SOM-MX6 Wireless LAN|Wireless LAN]]
-** [[VAR-SOM-MX6 Bluetooth|Bluetooth]]
-** [[VAR-SOM-MX6 Backlight|Backlight]]
-** [[VAR-SOM-MX6 USB OTG host|USB OTG as host]]
-** [[VAR-SOM-MX6 USB OTG as device|USB OTG as device]]
-** [[VAR-SOM-MX6 SPI|SPI]]
-** [[VAR-SOM-MX6 UART|External UART]]
 * Contact Support
-** [http://variscite.com/support-forum/index.php Support forum]
 ** support@variscite.com

VAR-SOM-AM33 Start Here: Difference between revisions