VAR-SOM-MX8M-MINI rev changelog: Difference between revisions

From Variscite Wiki
(→‎Software Changes: Yocto Warrior)
Line 42: Line 42:
|-
|-
| Yocto Warrior / Debian Buster (kernel 4.19.35)
| Yocto Warrior / Debian Buster (kernel 4.19.35)
| No patch needed
| [https://github.com/varigit/uboot-imx/commit/a669ff6bc29a3618201ba8ff822dc0b4951ef50a variscite: eth: ADIN1300: Disable RGMII RX clock delay]
| No patch needed
| [https://github.com/varigit/linux-imx/commit/0401896c4560df048a44069b635d3f779b54f02d net: fec: register ADIN1300 PHY fixup to configure rgmii]
|-
|-
| Yocto Sumo / B2Qt Sumo (kernel 4.14.98)
| Yocto Sumo / B2Qt Sumo (kernel 4.14.98)

Revision as of 17:29, 31 March 2022

VAR-SOM-MX8M-MINI changelog

VAR-SOM-MX8M-MINI V1.5

Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer Old MPN New Manufacturer New MPN
Qualcomm AR8033-AL1A-R /
AR8033-AL1B-R
Analog Devices Inc ADIN1300BCPZ

Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel
Yocto Hardknott 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
imx8_var_defconfig: enable driver for ADIN PHY
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye (kernel 5.4.142) 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
imx8_var_defconfig: enable driver for ADIN PHY
Yocto Zeus / Debian Bullseye (kernel 5.4.3) 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
imx8_var_defconfig: enable driver for ADIN PHY
Yocto Warrior / Debian Buster (kernel 4.19.35) variscite: eth: ADIN1300: Disable RGMII RX clock delay net: fec: register ADIN1300 PHY fixup to configure rgmii
Yocto Sumo / B2Qt Sumo (kernel 4.14.98) No patch needed No patch needed
Android 11.0.0_2.4.0 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
3) set ar8033 VDDH_REG to 1.8v on som
enable defconfig for ADIN PHY
Android 11.0.0_1.0.0 imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY enable defconfig for ADIN PHY
Android 10.0.0_2.6.0 imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY enable defconfig for ADIN PHY
Android 10.0.0_1.0.0 No patch needed No patch needed
Android 9.0.0_2.0.0 No patch needed No patch needed