Revision as of 12:05, 29 September 2021

DART-MX8M Release Notes

Yocto warrior-fsl-4.19.35-mx8mq-v1.1

Release Notes

Source	Repository	Branch	Commit ID
U-Boot	https://github.com/varigit/uboot-imx	imx_v2019.04_4.19.35_1.1.0-var01	f786e7bf9fd99050b158732e05e67ad34fdd9d2b
Kernel	https://github.com/varigit/linux-imx	imx_4.19.35_1.1.0_var01	1767ecabadca18a8a50057919ad4547b1021ff4d
meta-variscite-imx	https://github.com/varigit/meta-variscite-imx	warrior-imx-4.19.35-var01	150170c8f58138954e5f07f3095350a4d5e66e19

After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change List
Release 1.1
Kernel updates
Fixed LCD shifting issue after resume
MLK-22694: arch64: dts: fsl-imx8mq: Move src for dsi nodes and add lcdif clock
MLK-22694: imx: nwl_dsi-imx: Move mipi resets for i.MX8MQ
Enable HDMI Audio
Release 1.0
Upgraded to NXP BSP release 4.19.35_1.1.0

@@ Line 898: / Line 898: @@
 ! Change List !! Description
 |-
-| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
+| <span {{#var:STYLE_RELEASE}}>Release 1.1</span> ||
 |-
-| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy ||
+| Add PCIE PHY power regulator ||
 |-
-| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
+| Remove "hard-wired" PCIE0 controller property ||
 |-
 | MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 ||
 |-
-| Remove "hard-wired" PCIE0 controller property ||
+| MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy ||
+|-
+| MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy || For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
 |-
-|Add PCIE PHY power regulator || Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY.
+| <span {{#var:STYLE_RELEASE}}>Release 1.0</span> ||
-When PCIE_VPH is supplied by 3.3v (as on DART-MX8M) the VREG_BYPASS
-bits of GPR registers should be changed from default value 1b'1 to 1b'0.
-This will turn on the internal 3v3 to 1v8 translator.
 |-
+| Android 11.0.0 v1.0.0 (kernel 5.4.47) for DART-MX8M ||
 |-
 ! Known Issues !!