DART-MX8M Release Notes: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
| Line 749: | Line 749: | ||
|- | |- | ||
|Add PCIE PHY power regulator || Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY. | |Add PCIE PHY power regulator || Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY. | ||
When PCIE_VPH is supplied by 3.3v (as on DART-MX8M) the VREG_BYPASS | |||
bits of GPR registers should be changed from default value 1b'1 to 1b'0. | |||
This will turn on the internal 3v3 to 1v8 translator. | |||
|- | |- | ||
|- | |- | ||
Revision as of 01:36, 25 August 2021
DART-MX8M
Release Notes
Yocto warrior-fsl-4.19.35-mx8mq-v1.1
Release Notes
| Based on release | Yocto: Poky 2.7, BSP: NXP L4.19.35-1.1.0, Linux: imx_4.19.35_1.1.0 |
| Release tag | warrior-fsl-4.19.35-mx8mq-v1.1 |
| Release manifest | imx-4.19.35-1.1.0-var01.xml |
| Date | 5/27/2020 |
| Supported platforms | DART-MX8M |
| SOM revision | v1.1 and higher |
| File System build system | Yocto Warrior |
| Recovery SD card link | dart-mx8m-recovery-sd.v44a.img.gz |
Relevant git Repositories
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
| Change List |
|---|
| Release 1.1 |
| Kernel updates |
| Fixed LCD shifting issue after resume |
| MLK-22694: arch64: dts: fsl-imx8mq: Move src for dsi nodes and add lcdif clock |
| MLK-22694: imx: nwl_dsi-imx: Move mipi resets for i.MX8MQ |
| Enable HDMI Audio |
| Release 1.0 |
| Upgraded to NXP BSP release 4.19.35_1.1.0 |