BlueZ5 and A2DP: Difference between revisions

From Variscite Wiki
(Remove white space at bottom)
No edit summary
Line 3: Line 3:
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!--
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!--
--> {{#lst:B2QT_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!--
--> {{#lst:B2QT_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!--
--> {{#ifexpr:{{#var:YOCTO_VERSION}}>=31|
--> {{#ifexpr:{{#var:YOCTO_VERSION}}>=3.1|
{{#vardefine:AUDIO_SERVER|bluez-alsa}}
{{#vardefine:AUDIO_SERVER|bluez-alsa}}
{{#vardefine:BLUEZ_ALSA|1}}
{{#vardefine:BLUEZ_ALSA|1}}

Revision as of 17:08, 16 March 2021

Bluetooth A2DP

AD2DP Introduction

A2DP stands for Advanced Audio Distribution Profile. This is the Bluetooth Stereo profile which defines how high quality stereo audio can be streamed from one device to another over a Bluetooth connection - for example, music streamed from a mobile phone to wireless headphones.

Although many products may have Bluetooth enabled for voice calls, in order for music to be streamed from one Bluetooth device to another, both devices will need to have this A2DP profile. If both devices to do not contain this profile, you may still be able to connect using a standard Headset or Handsfree profile, however these profiles will not support stereo music.

BlueZ5 configuration currently supports A2DP both in server and client mode.


Please note that to correctly work, both HCI interface and pulseaudio server must be up & running. Please refer to FAQ section for further details

Server Mode

In server mode, you can connect the board via BT to a PC or a mobile phone and play an A2DP audio stream using on-board headphones connector.

Playback from external BT source

1. Connect headphones or speakers to the on-board headphones connector
2. Put the external device into pairing mode.
3. Scan and connect the external device to Variscite board.

$ bluetoothctl
[bluetooth]# power on
[bluetooth]# agent on
[bluetooth]# default-agent
[bluetooth]# pairable on
[bluetooth]# scan on

Copy mac address

[bluetooth]# scan off
[bluetooth]# pair <mac address>

Approve pairing on the device if required

[bluetooth]# trust <mac address>
[bluetooth]# connect <mac address>
[bluetooth]# quit

4. On the client side, connect to the device Variscite and play sound through it.

Recording from external BT source

1. Follow the steps above to pair and connect with external BT device
2. Check cards availability

# pactl list cards

3. If it's not the current profile, switch to a2dp profile 

# pactl set-card-profile <card #id from item 1> a2dp_source

example: 

# pactl set-card-profile 3 a2dp_source

4. recording audio originated by external BT source: 

# paplay -r --device=bluez_source.C8_14_79_27_F1_82 test.wav

The name format of BT device may differ between Yocto versions. Please check the output of pactl list sources short for the exact device name.

Client Mode

In client mode, you can connect and play A2DP audio stream using bluetooth headphones.

connect

Into console of device:

1. Start utility "bluetoothctl": 

# bluetoothctl

example: 

# bluetoothctl
[NEW] Controller F8:DC:7A:07:8D:A6 VAR-A2DP [default]
[NEW] Device C8:14:79:27:F1:82 SM-T315
[bluetooth]#

2. Prepare to сonnection: 

[bluetooth]# power on
[bluetooth]# agent on
[bluetooth]# default-agent

example: 

[bluetooth]# power on
Changing power on succeeded
[bluetooth]# agent on
Agent registered
[bluetooth]# default-agent
Default agent request successful
[bluetooth]#

3. The first time only, to connect BT headphones, make sure they are in pairing mode. They need to show up in the scan.

4. Enable scanning 

[bluetooth]# scan on

example: 

[NEW] Device 68:DF:DD:5D:CF:96 malupas
[NEW] Device 00:06:F7:B3:E9:ED MM100
[NEW] Device 00:07:80:41:68:15 KTS540_0000000
[NEW] Device C8:14:79:27:F1:82 SM-T315
[bluetooth]# scan on
Discovery started
[CHG] Controller F8:DC:7A:07:8D:A6 Discovering: yes
[CHG] Device 00:06:F7:B3:E9:ED RSSI: -57
[CHG] Device 00:07:80:41:68:15 RSSI: -65
[CHG] Device 68:DF:DD:5D:CF:96 RSSI: -98
[CHG] Device 00:07:80:41:68:15 RSSI: -73

"[NEW] Device 00:06:F7:B3:E9:ED MM100" are BT headphones.

5. Disable scanning 

[bluetooth]# scan off

example: 

[bluetooth]# scan off
Discovery stopped
[CHG] Controller F8:DC:7A:07:8D:A6 Discovering: no
[bluetooth]#

6. Pair the device 

[bluetooth]# pair 00:06:F7:B3:E9:ED

7. Connect the device 

[bluetooth]# connect 00:06:F7:B3:E9:ED

example: 

[bluetooth]# connect 00:06:F7:B3:E9:ED
Attempting to connect to 00:06:F7:B3:E9:ED
[CHG] Device 00:06:F7:B3:E9:ED Connected: yes
Connection successful
[MM100]#

8. Trust the device 

[MM100]# trust 00:06:F7:B3:E9:ED

example: 

[MM100]# trust 00:06:F7:B3:E9:ED
[CHG] Device 00:06:F7:B3:E9:ED Trusted: yes
Changing 00:06:F7:B3:E9:ED trust succeeded
[MM100]#

9. quit from bluetoothctl console 

[MM100]# quit

example: 

[MM100]# quit
[DEL] Controller F8:DC:7A:07:8D:A6 VAR-A2DP [default]
#

play test sound using MM100 headphones

1. Check cards availability. 

# pactl list cards

example: 

# pactl list cards
Card #0
       Name: alsa_card.platform-sound
       Driver: module-alsa-card.c
       Owner Module: 6
       Properties:
               alsa.card = "0"
               alsa.card_name = "wm8731-audio"
               alsa.long_card_name = "wm8731-audio"
               device.bus_path = "platform-sound"
               sysfs.path = "/devices/platform/sound/sound/card0"
               device.string = "0"
               device.description = "wm8731-audio"
               module-udev-detect.discovered = "1"
               device.icon_name = "audio-card"
       Profiles:
               input:analog-mono: Analog Mono Input (sinks: 0, sources: 1, priority: 2, available: yes)
               input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
               output:analog-mono: Analog Mono Output (sinks: 1, sources: 0, priority: 200, available: yes)
               output:analog-mono+input:analog-mono: Analog Mono Duplex (sinks: 1, sources: 1, priority: 202, available: yes)
               output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
               output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
               off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
       Active Profile: output:analog-stereo+input:analog-stereo
       Ports:
               analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec)
                       Properties:
                               device.icon_name = "audio-input-microphone"
                       Part of profile(s): input:analog-mono, input:analog-stereo, output:analog-mono+input:analog-mono, output:analog-stereo+input:analog-stereo
               analog-input-linein: Line In (priority: 8100, latency offset: 0 usec)
                       Part of profile(s): input:analog-mono, input:analog-stereo, output:analog-mono+input:analog-mono, output:analog-stereo+input:analog-stereo
               analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
                       Part of profile(s): output:analog-mono, output:analog-mono+input:analog-mono, output:analog-stereo, output:analog-stereo+input:analog-stereo

Card #6
       Name: bluez_card.00_06_F7_B3_E9_ED
       Driver: module-bluez5-device.c
       Owner Module: 37
       Properties:
               device.description = "MM100"
               device.string = "00:06:F7:B3:E9:ED"
               device.api = "bluez"
               device.class = "sound"
               device.bus = "bluetooth"
               device.form_factor = "headset"
               bluez.path = "/org/bluez/hci0/dev_00_06_F7_B3_E9_ED"
               bluez.class = "0x240404"
               bluez.alias = "MM100"
               device.icon_name = "audio-headset-bluetooth"
               device.intended_roles = "phone"
       Profiles:
               headset_head_unit: Headset Head Unit (HSP/HFP) (sinks: 1, sources: 1, priority: 20, available: yes)
               a2dp_sink: High Fidelity Playback (A2DP Sink) (sinks: 1, sources: 0, priority: 10, available: yes)
               off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
       Active Profile: headset_head_unit
       Ports:
               headset-output: Headset (priority: 0, latency offset: 0 usec)
                       Part of profile(s): headset_head_unit, a2dp_sink
               headset-input: Headset (priority: 0, latency offset: 0 usec)
                       Part of profile(s): headset_head_unit

We are interested in Card # 6.

2. If it's not the current profile, switch to a2dp profile 

# pactl set-card-profile <card #id from item 1> a2dp_sink

example: 

# pactl set-card-profile 6 a2dp_sink

3. play wav file from pulse subsystem to bluetooth headphones 

# paplay -p --device=bluez_sink.XX_XX_XX_XX_XX_XX /usr/share/sounds/alsa/Front_Center.wav

Where:

XX_XX_XX_XX_XX_XX - MAC address from item 1 /usr/share/sounds/alsa/Front_Center.wav - is the file to be played

example: 

# paplay -p --device=bluez_sink.00_06_F7_B3_E9_ED /usr/share/sounds/alsa/Front_Center.wav

The name format of BT sink device may differ between Yocto versions. Please check the output of pactl list sinks short to get ethe exact device name.

FAQ

1. The sound doesn't play using headphones connector (board in server mode) or BT headphones (board in client mode).

ALSA may be configured incorrectly, use this command: 

# amixer set 'Output Mixer HiFi' on

pulseaudio server may be not started, use this command: 

# pactl list cards

HCI interface may be down, use this command: 

# hciconfig hci0 up


Retrieved from "https://variwiki.com/index.php?title=BlueZ5_and_A2DP&oldid=16041"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 16 March 2021, at 17:08.

© 2024 Variscite. All rights reserved