Fastboot Unlock: Difference between revisions
From Variscite Wiki
No edit summary |
|||
| Line 14: | Line 14: | ||
or on Serial terminal | or on Serial terminal | ||
# reboot bootloader | # reboot bootloader | ||
* Type "fastboot | * Type "fastboot 0" in the U-Boot command line | ||
* Run "sudo `which fastboot` oem unlock" from the Host PC | * Run "sudo `which fastboot` oem unlock" from the Host PC | ||
* Wait until the unlock process is complete | * Wait until the unlock process is complete | ||
Now you should have you device OEM unlocked, and from now onwards you can flash your custom built images generated from your Android build. | Now you should have you device OEM unlocked, and from now onwards you can flash your custom built images generated from your Android build. | ||
Revision as of 06:04, 24 February 2021
VAR-SOM-MX6 - Android Nougat N7.1.1 - Fastboot unlock
OEM unlocking via Fastboot
If you are using the userdebug build, it behaves like a standard Android device and says device is locked. You may need to unlock the device by following below steps:
- Settings => System => About Tablet => Build number
- Keep on tapping until you see a prompt that says "You are now a developer!"
- Settings => System => Advanced => Deveoper options => OEM unlocking
- reboot to bootloader via
$ adb reboot bootloader
or on Serial terminal
# reboot bootloader
- Type "fastboot 0" in the U-Boot command line
- Run "sudo `which fastboot` oem unlock" from the Host PC
- Wait until the unlock process is complete
Now you should have you device OEM unlocked, and from now onwards you can flash your custom built images generated from your Android build.