VAR-SOM-SD600 fastboot: Difference between revisions

Latest revision as of 15:20, 30 April 2014

General information

Boot sequence and partition table consist of:

Qualcomm's proprietary bootloaders (SBLs). Reside in the first partitions
LK bootloader (fastboot)
Kernel
Android FS

Note: Bad installation of either SBLs or LK bootloader (fastboot), will result in sending SOM back to Variscite for an RMA procedure.

Pre-built package

- boot.img: Linux Kernel + Ramdisk boot
- cache.img: Android Cache partition
- emmc_appsboot.mbn: Fastboot bootloader
- flashall.sh: A script to flash images over fastboot
- persist.img: Android persist partition
- recovery.img: Recovery image
- system.img: Android system partition
- userdata.img: Android data partition

Flashing pre-built binaries to eMMC flash-storage

Execute the fastboot script

$cd /path to prebuilt imagages folder
$sudo ./flashall

The following should be displayed on ubuntu host:

"waiting for device"

Connect device to PC:

Press and hold the fastboot button
Power up the device, or press the reset button
Connect the OTG cable to PC

The following should be displayed on the host Ubuntu:

The following should be displayed on ubuntu host:

"connected"

@@ Line 1: / Line 1: @@
 == General information ==
-Qualcomm's propietary bootloaders (SBLs) can not be shared with customers Bad installation of either SBLs or LK bootloader (fastboot), will result in sending SOM back to Variscite for an RMA procedure.
+Boot sequence and partition table consist of:
+#Qualcomm's proprietary bootloaders (SBLs). Reside in the first partitions
+#LK bootloader (fastboot)
+#Kernel
+#Android FS
+<span style="color:#ff0000;">Note</span>: Bad installation of either SBLs or LK bootloader (fastboot), will result in sending SOM back to Variscite for an RMA procedure.
 == Pre-built package ==
   - boot.img: Linux Kernel + Ramdisk boot
   - cache.img: Android Cache partition
   - emmc_appsboot.mbn: Fastboot bootloader
   - flashall.sh: A script to flash images over fastboot
   - persist.img: Android persist partition
   - recovery.img: Recovery image
   - system.img: Android system partition
   - userdata.img: Android data partition
-== Installing binaries to eMMC storage ==
+== Flashing pre-built binaries to eMMC flash-storage ==
-*execute the fastboot script
+Execute the fastboot script
 <pre>$cd /path to prebuilt imagages folder
 $sudo ./flashall
 </pre>
+<br/>The following should be displayed on ubuntu host:
-The following should be displayed on ubuntu host:
-<pre>"waiting for device"
-</pre>
-Connect device to PC:
-*
-=== Flash from GUI ===
-*Press the right arrow on the upper right corner to change the desktop into Utilities.
@@ Line 37: / Line 38: @@
+<pre>"waiting for device"
+</pre>
+Connect device to PC:
+*Press and hold the fastboot button
+*Power up the device, or press the reset button
+*Connect the OTG cable to PC
-*Push FlashAndroid or FlashYocto icon.
+The following should be displayed on the host Ubuntu:
-=== Flash from command line ===
-*Login as root (no password)
+<br/>The following should be displayed on ubuntu host:
-*From Linux command line, type: "nand-recovery.sh" (This will install Yocto/Linux on the NAND)
+<br/><br/><br/><br/><br/><pre>"connected"
-*To install Android type: "nand-recovery.sh -o Android".
+</pre><br/><br/> <br/><br/><br/><br/><br/> <br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> <br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> <br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>
-*Reboot and Unplug the SD card