MX8 Basler Camera: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
<!-- Set release according to "release" parameter in URL and use | <!-- Set release according to "release" parameter in URL and use RELEASE_SUMO_V2.2_DART-MX8M-MINI as default | ||
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- | --> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- | ||
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM| | --> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_SUMO_V2.2_DART-MX8M-MINI}}}} <!-- | ||
--> {{PageHeader|{{#var:HARDWARE_NAME}} Basler Camera}} {{DocImage|category1=Yocto|category2={{#var:HARDWARE_NAME}}}} __toc__ | --> {{PageHeader|{{#var:HARDWARE_NAME}} Basler Camera}} {{DocImage|category1=Yocto|category2={{#var:HARDWARE_NAME}}}} __toc__ | ||
Revision as of 12:03, 26 January 2020
Introduction
The following instructions will help you to integrate Basler MIPI camera support into Variscite Yocto images for i.MX8M and i.MX8MM platforms.
This will allow you to stream images/video from a Basler camera(s) connected to Variscite evaluation platforms.
You can save the camera output to a storage device and process it using the Basler pylon SDK and the pylonViewer app.
Download Variscite Yocto BSP
Please follow Build Yocto from source code.
Execute steps 1-4.3 to download the BSP sources, but don't start bitbake yet.
Download and install Basler meta layers
$ wget ftp://customerv:Variscite1@ftp.variscite.com/Basler/basler-dart-bcon-mipi-imx8-cep_1.1.2.tar.gz $ tar xf basler-dart-bcon-mipi-imx8-cep_1.1.2.tar.gz -C sources
Download and install Variscite kernel patches
$ wget ftp://customerv:Variscite1@ftp.variscite.com/Basler/sumo-fsl-4.14.98/recipes-kernel/linux.tar.gz $ rm -rf sources/meta-variscite-imx/recipes-kernel/linux $ tar xf linux.tar.gz -C sources/meta-variscite-imx/recipes-kernel
Customize configuration files
Customize bblayers.conf
Add the following lines to conf/bblayers.conf
BBLAYERS += " ${BSPDIR}/sources/meta-basler-imx8 "
BBLAYERS += " ${BSPDIR}/sources/meta-basler-tools/meta-basler-common "
Customize local.conf
Add the following lines to conf/local.conf to add Basler software and driver
IMAGE_INSTALL_append = " \
basler-camera-driver \
pylon \
python3-pypylon \
gentl-producer \
"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-basler-camera-driver"
Add the following lines to add Basler DTB files
KERNEL_DEVICETREE_append_imx8mm-var-dart = " \
freescale/fsl-imx8mm-var-dart-basler-camera.dtb \
"
Build Yocto image
Follow Variscite wiki to build and install Yocto image.
Running Basler camera application
Run the following commands at the shell prompt:
$ export DISPLAY=:0.0 $ GENICAM_GENTL64_PATH=/opt/dart-bcon-mipi/lib /opt/pylon6/bin/pylonviewer 2>/dev/null &