VAR-SOM-MX6 Yocto NAND Recovery: Difference between revisions
From Variscite Wiki
| Line 15: | Line 15: | ||
=== Flash from GUI === | === Flash from GUI === | ||
[[File:Desktop1.png]] | [[File:Desktop1.png]] | ||
*Press the right arrow on the upper right to change the desktop into Utilities. | *Press the right arrow on the upper right corner to change the desktop into Utilities. | ||
[[File:Desktop2.png]] | [[File:Desktop2.png]] | ||
*Push FlashAndroid or FlashYocto icon. | *Push FlashAndroid or FlashYocto icon. | ||
=== Flash from command line === | === Flash from command line === | ||
*Login as root (no password) | *Login as root (no password) | ||
Revision as of 06:51, 30 January 2014
As an easy and fast way to recover the VAR-SOM-MX6 NAND flash, Variscite provides a recovery SD card image that can be used to install the pre-built U-Boot, Linux kernel and the UBI file system. This SD card image includes a script (nand-recovery.sh) that installs all the boot images and root file-system.
Preparing rescue SD-Card:
- Plug-in supplied SD card to your Linux machine, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblk0)
- gunzip mx6qd-som-nand-recovery-sd.v22_1.img.gz (Available from Variscite's FTP)
- sudo dd if=mx6qd-som-nand-recovery-sd.v22_1.img of=/dev/sdX bs=128k
Recover Nand Flash:
- Insert the SD card into the SD/MMC slot of the custom board
- Press and hold the boot select button, power-off and power-on the board
- The board will automatically boot into Linux
Flash from GUI
- Press the right arrow on the upper right corner to change the desktop into Utilities.
- Push FlashAndroid or FlashYocto icon.
Flash from command line
- Login as root (no password)
- From Linux command line, type: "nand-recovery.sh" (This will install Linux on the NAND)
- To install Android type: "nand-recovery.sh -o Android".
- Reboot and Unplug the SD card