View source for Boot2QT Recovery SD card

<!-- Set release according to "release" parameter in URL and use MORTY_V1.0_VAR-SOM-MX6 as default
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--
--> {{#lst:B2QT_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_MORTY_V1.0_VAR-SOM-MX6}}}} <!--
--> {{PageHeader|Boot2Qt Recovery SD card}} {{DocImage|category1={{#var:HARDWARE_NAME}}|category2=Boot2Qt|}} __toc__
Variscite provides a recovery SD card image that can be used to install the pre-built U-Boot, Linux kernel and the file system into the internal storage of the SOM.

== Download the recovery SD card image ==
Download '''{{#var:RECOVERY_SD_NAME}}''' from Variscite's FTP server: {{#var:RECOVERY_SD_URL}}

{{:Recovery_SD_card_general}}

== Recover NAND flash/eMMC ==
* Power-off the board.
* Insert the SD card into the SD card slot of the carrier board (DVK)
* Make sure the Boot Mode is set to SD card: see {{Varlink|Yocto_Build_Release#Setting the Boot Mode|{{#var:YOCTO_RELEASE_LINK}}|Setting the Boot Mode}} section
* Power up the board - it will boot into Linux from the SD card


=== Flash from command line ===
* Login as root (no password)
* From Linux command line, type one of flash options
<pre>
$ install_yocto.sh	- Flash Yocto into eMMC or NAND Flash (Follow instructions)
</pre>

=== SD card image file tree ===

<pre>
The install_yocto.sh script file is located at /usr/bin/
</pre>