View source for MX8 e-con Camera

<!-- Set release according to "release" parameter in URL and use RELEASE_SUMO_V2.4_DART-MX8M-MINI as default
--> {{#vardefine:RELEASE_PARAM|{{#urlget:release|RELEASE_SUMO_V2.4_DART-MX8M-MINI}}}} <!--
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!--
--> {{#lst:B2QT_Platform_Customization|{{#var:RELEASE_PARAM}}}} <!--
--> {{PageHeader|{{#var:HARDWARE_NAME}} e-con Systems Camera}} {{DocImage|category1=Yocto|category2=DART-MX8M}}[[Category:DART-MX8M-MINI]] __toc__

= Introduction =
The following instructions will allow you to add support for the e-con Systems MIPI camera [https://www.variscite.com/product/accessories/vcam-ar1335e/ VCAM-AR1335E] to your Yocto images.<br>
This will allow you to stream images/video from a e-con Systems camera [https://www.variscite.com/product/accessories/vcam-ar1335e/ VCAM-AR1335E] connected to a Variscite evaluation kit.<br>

= Download the Variscite Yocto BSP = 
Please follow {{Varlink|Yocto_Build_Release|{{#var:RELEASE_LINK}}|Build Yocto from source code}}.<br>
Execute steps 1-4.3 to download the BSP sources, but don't run bitbake yet.

= Download and install the e-con meta layers = 
 {{#if: {{#var:META_ECON_BRANCH}}|
 $ git clone https://github.com/varigit/meta-econ-imx -b {{#var:META_ECON_BRANCH}} ../sources/meta-econ-imx
 }}<!--
 -->{{#ifeq: {{#var:YOCTO_NAME}} | Sumo |
 $ wget ftp://customerv:Variscite1@ftp.variscite.com/e-con/sumo-fsl-4.14.98/meta-econ-imx8.tar.gz
 $ tar xf meta-econ-imx8.tar.gz -C ../sources
 $ wget ftp://customerv:Variscite1@ftp.variscite.com/e-con/sumo-fsl-4.14.98/meta-variscite-imx-econ.tar.gz
 $ tar xf meta-variscite-imx-econ.tar.gz -C ../sources
 }}
 
= Customize configuration files =

== Customize bblayers.conf ==
Add the following lines to conf/bblayers.conf under your Yocto build directory:
 {{#if: {{#var:META_ECON_BRANCH}}|
 BBLAYERS += " ${BSPDIR}/sources/meta-econ-imx "
 }}<!--
 -->{{#ifeq: {{#var:YOCTO_NAME}} | Sumo |
 BBLAYERS += " ${BSPDIR}/sources/meta-econ-imx8 "
 BBLAYERS += " ${BSPDIR}/sources/meta-variscite-imx-econ "
 }}

{{#if: {{#var:META_ECON_LOCALCONF_SECTION}} |
== Customize local.conf ==
Add the following to conf/local.conf under your Yocto build directory:
{{#lst:Yocto_Platform_Customization|{{#var:META_ECON_LOCALCONF_SECTION}}}}
}}

= Build a Yocto image =
Continue following {{Varlink|Yocto_Build_Release|{{#var:RELEASE_LINK}}|Build Yocto from source code}} from where you left off, to bitbake and install an image.

= Testing the e-con Systems camera =
Follow the {{Varlink|DART-MX8M CSI|{{#var:RELEASE_LINK}}|{{#var:HARDWARE_NAME}} Camera}} page to test the camera.

{{#if: {{#var:ECON_RECOVERY_SD_PATH}} |
= Prebuilt recovery SD card image =
A prebuilt recovery SD card image with e-con camera support can be downloaded from:<br>

ftp://customerv:Variscite1@ftp.variscite.com/e-con/Software/{{#var:ECON_RECOVERY_SD_PATH}}

'''Note:''' Some web browsers have removed FTP support. Please see our [[FTP|FTP wiki page]].<br>
}}