Yocto Build U-Boot: Difference between revisions

From Variscite Wiki
(Simplify nested ifs into switch)
(Undo revision 21180 by Nate (talk))
Tag: Undo
Line 157: Line 157:
}}
}}


{{#switch: {{#var:SOC}}
{{#ifeq: {{#var:SOC_FAMILY}}|imx8|
| mx8qxp=
{{#ifeq: {{#var:SOC}}|mx8qxp|
Depending on i.MX8QXP SOC revision different instructions should be used to build boot image.<br>
Depending on i.MX8QXP SOC revision different instructions should be used to build boot image.<br>
The SOC revision is printed by u-boot as follows
The SOC revision is printed by u-boot as follows
Line 174: Line 174:
  $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} REV=C0 MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh flash_spl
  $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} REV=C0 MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh flash_spl
  $ mv flash.bin {{#var:U-BOOT_SD_IMAGE_NAME}}
  $ mv flash.bin {{#var:U-BOOT_SD_IMAGE_NAME}}
| mx8qm=
|
Build boot image:
Build boot image:
  $ make -f soc.mak clean
  $ make -f soc.mak clean
Line 180: Line 180:
  $ mv flash.bin {{#var:U-BOOT_SD_IMAGE_NAME}}
  $ mv flash.bin {{#var:U-BOOT_SD_IMAGE_NAME}}
}}
}}
| mx8mq=
|
{{#ifeq: {{#var:SOC}}|mx8mq|
Build boot image:
Build boot image:
  $ make -f soc.mak clean
  $ make -f soc.mak clean
  $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} dtbs={{#var:U-BOOT_DTB_FILE|{{#var:DEFAULT_DTB}}}} MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_evk
  $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} dtbs={{#var:U-BOOT_DTB_FILE|{{#var:DEFAULT_DTB}}}} MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_evk
| mx8mm=
|
{{#ifeq: {{#var:SOC}}|mx8mm|
{{#ifeq: {{#var:FSL_BSP_VERSION}}| L4.14.78-1.0.0_ga |
{{#ifeq: {{#var:FSL_BSP_VERSION}}| L4.14.78-1.0.0_ga |
Build boot image:
Build boot image:
Line 194: Line 196:
  $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} dtbs="{{#var:U-BOOT_DTB_DART}} {{#var:U-BOOT_DTB_SOM}} {{#var:U-BOOT_DTB_SOM_10}}" MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_lpddr4_ddr4_evk
  $ make -f soc.mak SOC={{#var:IMX_MKIMAGE_SOC}} dtbs="{{#var:U-BOOT_DTB_DART}} {{#var:U-BOOT_DTB_SOM}} {{#var:U-BOOT_DTB_SOM_10}}" MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_lpddr4_ddr4_evk
}}
}}
| mx8mn=
|
{{#ifeq: {{#var:SOC}}|mx8mn|
Build boot image:
Build boot image:
  $ make -f soc.mak clean
  $ make -f soc.mak clean
  $ make -f  soc.mak  SOC={{#var:IMX_MKIMAGE_SOC}}  dtbs="{{#var:U-BOOT_DTB_SOM}}  {{#var:U-BOOT_DTB_SOM_10}}" MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_ddr4_evk
  $ make -f  soc.mak  SOC={{#var:IMX_MKIMAGE_SOC}}  dtbs="{{#var:U-BOOT_DTB_SOM}}  {{#var:U-BOOT_DTB_SOM_10}}" MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_ddr4_evk
| mx8mp=
|
{{#ifeq: {{#var:SOC}}|mx8mp|
Build boot image:
Build boot image:
  $ make -f soc.mak clean
  $ make -f soc.mak clean
  $ make -f soc.mak  SOC={{#var:IMX_MKIMAGE_SOC}}  dtbs="{{#var:U-BOOT_DTB_DART}}  {{#var:U-BOOT_DTB_SOM}}"  MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh  CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_evk
  $ make -f soc.mak  SOC={{#var:IMX_MKIMAGE_SOC}}  dtbs="{{#var:U-BOOT_DTB_DART}}  {{#var:U-BOOT_DTB_SOM}}"  MKIMG=./mkimage_imx8 PAD_IMAGE=./pad_image.sh  CC=gcc OUTIMG={{#var:U-BOOT_SD_IMAGE_NAME}} flash_evk
}}
|}} }} }} }} }} }}


= Install the built U-Boot on an SD card =
= Install the built U-Boot on an SD card =

Revision as of 23:24, 6 January 2023

Yocto Build U-Boot from source code

Toolchain installation for out of Yocto builds

To install the toolchain, follow Yocto Toolchain installation.

Build U-Boot out of Yocto tree

Obtain sources:

$ git clone https://github.com/varigit/uboot-imx.git -b imx_v2015.04_4.1.15_1.1.0_ga_var03
$ cd uboot-imx

Configure compilation environment:

$ source /opt/fslc-x11/2.2.1/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi

Cleanup everything:

$ make mrproper

Select one of the following configurations:

For booting from SD card/eMMC:
$ make mx6var_som_sd_defconfig

For booting from NAND flash:
$ make mx6var_som_nand_defconfig

Build U-Boot:

$ make -j$(nproc)


Install the built U-Boot on an SD card


$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync
$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync

(Replace /dev/sdX with the correct device)

If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card:

$ sudo cp SPL /media/rootfs/opt/images/…
$ sudo cp u-boot.img /media/rootfs/opt/images/…

And eject the SD card gracefully from host machine.


Note: If you manually upgrade an existing U-Boot, and you have an old environment saved, it is a good idea to reset your environment to the new default (see Environment handling commands)

Update your U-Boot out of Yocto tree

$ git pull