VAR-SOM-OM37 Windows GS: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{PageHeader|VAR-SOM-OM37 - Windows CE support}}
{{DocImage|category1=VAR-SOM-OM37|category2=Windows}}
{{DocImage|category1=VAR-SOM-OM37|category2=Windows}}
=VAR-SOM-OM37 - Windows CE support =
__toc__
__toc__
=Support=
==Support==
Variscite supports its VAR-SOM-OM37 with Windows CE 6 R3 and Windows Embedded compact 7 BSPs.
Variscite supports its VAR-SOM-OM37 with Windows CE 6 R3 and Windows Embedded compact 7 BSPs.


Line 14: Line 14:
# Sample media contents for playing via the DM3730 hardware acceleration.
# Sample media contents for playing via the DM3730 hardware acceleration.


=Resources=
==Resources==
==WindowsCE OS Update Service==
*[[O.S. update service|O.S. update service]]  
===  overview  ===
*[[R3 Silverlight Support|R3 Silverlight Support]]
 
*[[Suspend_Service_-_Graceful_shutdown|Suspend Service - Graceful Shutdown]]
Variscite's Windows CE BSP includes a proprietary OS update service.<br>
*[[VAR-SOM-OM35/7 Windows OpenGL | OpenGL]]
 
*[[VAR-SOM-OM37 Windows EBOOT compilation|EBOOT compilation]]
The service provides the ability to remotely update the OS run-time-image which resides on the on-board NAND-flash.<br>
*[[Nand Flash Based File-systems Usage guidlines|Nand Flash Based File-systems- Usage Guidlines]]
 
*[[VAR-SOM-OM35/7 Windows SDK |SDK setup and Application Development]]
Windows embedded compact 7 releases 1.25 and forth, support EBOOT, boot configuration and screen logo update as well.
 
O.S. update procedure is power-fail proof.&nbsp; OS image will not replace current one, until the flashing process is successfully completed and verified.<br>
 
All other updates are not power fail proof, user must ensure proper power stability before procedure start.
 
<br>
 
=== Boot Configuration API<br>  ===
Boot configuration structure (BOOT_CFG) declared in file boot_args.h
Two IOCTLs provided:
OSU_IOCTL_READ_BOOTARGS  - Reads boot configuration from flash memory into user buffer
OSU_IOCTL_WRITE_BOOTARGS - Saves boot configuration from user buffer into flash memory
Note that OSU_IOCTL_WRITE_BOOTARGS is not fail-safe: if for some reason (like power removal) if will fail, it may leave boot configuration in undefined state.
 
=== OS image, EBOOT and Logo update API<br>  ===
OS image update (like EBOOT and Logo update) uses two IOCTLs:<br>
OSU_IOCTL_SET_FILE - Sets the file-name for consequent update operation. For OS image update file shall be of "nb0" (raw binary) type.
<br>OSU_IOCTL_UPDATE - Initiates the OS image update procedure<br>
 
Updating EBOOT also uses two IOCTLs: same OSU_IOCTL_SET_FILE followed by OSU_IOCTL_UPDATE_EBOOT. EBOOT file shall be in "nb0" (raw binary) format.
Please  ensure that correct file is specified, because there is no way for the driver to determine that raw binary contains EBOOT.
 
Updating EBOOT also uses two IOCTLs: same OSU_IOCTL_SET_FILE followed by OSU_IOCTL_UPDATE_LOGO. Logo file shall be in "bmp" (24-bit RGB) format. Make sure that supplied bitmap has exactly the size of your screen, otherwise it will not be displayed correctly by EBOOT.
 
{{note|'''Note''':<br/> The NK.nb0 and EBOOTND.nb0 files are generated as part of OS build. The files may be found in the Release directory under the corresponding project. For example, if the user builds the VAR_SOM-OM37_P BSP with VAR-SOM-OM3X_REL project, then the file will reside in the \WINCE600\Osdesign\VAR-SOM-OM3X_REL\VAR-SOM-OM3X_REL\RelDir\VAR_SOM_OM37_P_ARMV4I_Release folder.|info}}
 
{{note|'''Note''':<br/> The OS update procedure requires reboot for updated OS image activation. User should reset the system when ready.|info}}
 
Application may use the following command to reset the system:
<pre>SetSystemPowerState(NULL, POWER_STATE_RESET, 0);
</pre>
{{note|'''Note''':<br/> The driver uploads full OS image file to the RAM. Therefore, for successful update operation, driver requests 32M of free RAM.|info}}
 
<span style="color: rgb(255,0,0)">Service limitation</span>: OS update service nk0 size limit:
 
Windows CE6: 40MB
 
Windows embedded compact 7: &nbsp;VAR-SOM-AM35 &nbsp; - &nbsp;80MB, VAR-SOM-OM37 - 62MB<br><br>
 
=== Sample application - all O.S. update features<br>  ===
{{note|Note that preprocessor variable DYNAMIC_OS_BOOT must be defined (in project properties)|info}}
<pre>// OSUpdate.cpp&nbsp;: Defines the entry point for the console application.
//
#pragma warning(push)
#pragma warning(disable : 4115 6067)
#include <windows.h>
#include "oalex.h"
#include "boot_args.h"
 
void RetailPrint(wchar_t *pszFormat, ...);
//extern int CreateArgvArgc(TCHAR *pProgName, TCHAR *argv[20], TCHAR *pCmdLine);
 
#define OSU_IOCTL_BASE 0x35300000
#define OSU_IOCTL_SET_FILE ((OSU_IOCTL_BASE)+0)
#define OSU_IOCTL_UPDATE ((OSU_IOCTL_BASE)+1)
#define OSU_IOCTL_UPDATE_EBOOT ((OSU_IOCTL_BASE)+2)
#define OSU_IOCTL_UPDATE_LOGO ((OSU_IOCTL_BASE)+3)
#define OSU_IOCTL_READ_BOOTARGS ((OSU_IOCTL_BASE)+4)
#define OSU_IOCTL_WRITE_BOOTARGS ((OSU_IOCTL_BASE)+5)
 
TCHAR strOsImage[MAX_PATH] = L"\\Hard Disk\\NK.nb0";
TCHAR strOsEboot[MAX_PATH] = L"\\Hard Disk\\Eboot.nb0";
TCHAR strOsLogo[MAX_PATH] = L"\\Hard Disk\\logo.bmp";
BOOT_CFG BootArgs;
 
int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrevInst, LPWSTR lpCmdLine, int nCmShow)
{
HANDLE hDrvContext;
DWORD dwErr=1;
DWORD dwRet;
   
    UNREFERENCED_PARAMETER(hInst);
    UNREFERENCED_PARAMETER(hPrevInst);
    UNREFERENCED_PARAMETER(nCmShow);
 
// Open OSU driver
hDrvContext =
        CreateFile(L"OSU0:", GENERIC_READ, 0, NULL, OPEN_EXISTING, 0, NULL);
 
if (hDrvContext == INVALID_HANDLE_VALUE) {
RETAILMSG(1, (TEXT("ERROR: Can't open OSU driver\r\n")));
return -1;
}
 
RETAILMSG(1, (TEXT("Reading boot config\r\n")));
if (!DeviceIoControl(hDrvContext, OSU_IOCTL_READ_BOOTARGS, NULL, 0, &BootArgs, sizeof(BootArgs), &dwRet, NULL))
{
RETAILMSG(1, (L"ERROR: can't read Boot_CFG, err = %d\r\n", GetLastError()));
}
RETAILMSG(1, (L"Boot Args ver %d signature %x\r\n", BootArgs.version, BootArgs.signature));
 
if (!DeviceIoControl(hDrvContext, OSU_IOCTL_WRITE_BOOTARGS, &BootArgs, sizeof(BootArgs), NULL, 0, &dwRet, NULL))
{
RETAILMSG(1, (L"ERROR: can't write Boot_CFG, err = %d\r\n", GetLastError()));
}
        RetailPrint(TEXT("Updating Eboot from %s\n"), strOsEboot);
DeviceIoControl(hDrvContext, OSU_IOCTL_SET_FILE, strOsEboot, _tcslen(strOsEboot)*sizeof(TCHAR), NULL, 0, NULL, NULL);
 
// start update process
if (!DeviceIoControl(hDrvContext, OSU_IOCTL_UPDATE_EBOOT, NULL, 0, NULL, 0, NULL, NULL))
{
LPVOID lpMsgBuf = NULL;
DWORD dw = GetLastError();
 
// REQUIRES SYSGEN_FMTMSG AND SYSGEN_FMTRES
dwErr = FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM |
FORMAT_MESSAGE_IGNORE_INSERTS,
NULL,
dw,
0,
(LPTSTR) &lpMsgBuf,
512, NULL );
 
// Display the error message
RETAILMSG(1, (L"ERROR: can't update Logo, err = %d/%d, %s\r\n", dw, dwErr, lpMsgBuf));
}
 
RetailPrint(TEXT("Updating Logo from %s\n"), strOsLogo);
 
DeviceIoControl(hDrvContext, OSU_IOCTL_SET_FILE, strOsLogo, _tcslen(strOsLogo)*sizeof(TCHAR), NULL, 0, NULL, NULL);
 
// start update process
if (!DeviceIoControl(hDrvContext, OSU_IOCTL_UPDATE_LOGO, NULL, 0, NULL, 0, NULL, NULL))
{
LPVOID lpMsgBuf = NULL;
DWORD dw = GetLastError();
 
// REQUIRES SYSGEN_FMTMSG AND SYSGEN_FMTRES
dwErr = FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM |
FORMAT_MESSAGE_IGNORE_INSERTS,
NULL,
dw,
0,
(LPTSTR) &lpMsgBuf,
512, NULL );
 
// Display the error message
RETAILMSG(1, (L"ERROR: can't update Logo, err = %d/%d, %s\r\n", dw, dwErr, lpMsgBuf));
}
 
RetailPrint(TEXT("Updating NK image from %s\n"), strOsImage);
// set file name holding new OS image
DeviceIoControl(hDrvContext, OSU_IOCTL_SET_FILE, strOsImage, _tcslen(strOsImage)*sizeof(TCHAR), NULL, 0, NULL, NULL);
// start update process
if (!DeviceIoControl(hDrvContext, OSU_IOCTL_UPDATE, NULL, 0, NULL, 0, NULL, NULL))
{
LPVOID lpMsgBuf = NULL;
DWORD dw = GetLastError();
 
// REQUIRES SYSGEN_FMTMSG AND SYSGEN_FMTRES
dwErr = FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER |
FORMAT_MESSAGE_FROM_SYSTEM |
FORMAT_MESSAGE_IGNORE_INSERTS,
NULL,
dw,
0,
(LPTSTR) &lpMsgBuf,
512, NULL );
 
// Display the error message
RETAILMSG(1, (L"ERROR: can't update OS, err = %d/%d, %s\r\n", dw, dwErr, lpMsgBuf));
}
 
    return 0;
}
 
///////////////////////////////////////////////////////////////////////////////
// Used to show message serial terminal AND console window
void RetailPrint(wchar_t *pszFormat, ...)
{
    va_list al;
    wchar_t szTemp[2048];
    wchar_t szTempFormat[2048];
 
    va_start(al, pszFormat);
    vwprintf(pszFormat, al);
    // Show message on RETAILMSG
    swprintf(szTempFormat, L"OSUPDATE: %s\r", pszFormat);
    pszFormat = szTempFormat;
    vswprintf(szTemp, pszFormat, al);
    RETAILMSG(1, (szTemp));
 
    va_end(al);
}
#pragma warning(pop)
 
</pre>
==R3 Silverlight Support==
This chapter describes how to enable Windows Embedded CE 6.0 R3 Silverlight support
 
=== OpenGL Support ===
 
Silverlight uses OpenGL API, therefore uses the OMAP3530 / dm3730 on-chip OpenGL HW accelerator.
 
In order to use the OpenGL accelerator, the PowerVR SW component should be included in the workspace.
 
Follow the following steps:
 
*Download PowerVR latest version from Variscite FTP site. The package should reside under '''/OMAP/WindowsCE/Release/x.y.z/PowerVR/''' folder, where "x.y.z" should be substituted with the version of latest BSP.
*Follow the installation instructions in the '''_Installation.txt''' file, residing in the mentioned above folder
*Open working solution in Visual Studio 2005. For example VAR_OM35xx_REL.
*Go to the Catalog view
*Open '''Third Party''' folder
*Check '''PowerVR''' and open it as folder
*Check '''OpenGLES 2.0''' form the '''3D API''' folder
 
For more details reference to [[OpenGL on VAR-SOM-OM35 Windows CE]] topic.
 
=== Enable Silverlight Components  ===
 
*Go to the '''Solution Explorer'''
*Right click on the solution name
*Choose Properties
*Go to the '''Configuration Properties &gt; Environment'''
*Set '''New''' environment variable '''SYSGEN_XAML_RuntimeCreates''' to be '''1'''
*Set '''New''' environment variable '''BSP_XRPLUGIN_OPENGL''' to be '''1'''
*Set '''New''' environment variable '''SYSGEN_SAMPLEXAMLPERF''' to be '''1'''. This settings optional for including Silverlight examples
 
=== Building  ===
 
Perform '''CLEAN SYSGEN''' build.
 
== Suspend Service - Graceful shutdown==
Below you can find information on the Suspend service, which enables a graceful shutdown of the FAT file-system, in case of a power failure.
 
=== Power failure and file-systems  ===
 
During the device's life-time, power failure may occur. These&nbsp;failures threaten the reliability of the FAT file-system. The use of Windows CE's TFAT (Transaction-safe FAT)&nbsp;/ ExFAT significally reduces the&nbsp;risk of a file-system corruption. However, no file system is 100% fail-safe. Power failure while file-system is actively writing, might rarely cause errors, even while using TFAT. Therefore, a graceful shutdown at power failure incident, when possible, is recommended. The suspend service requires 250ms to complete the File-system shutdown, while SOMs power consumption is 1.32Watt (400ma @3.3v)<br>
 
=== Suspend service - Graceful shutdown. Usage guidelines  ===
 
Suspend service is waiting for a falling-edge event of a specific GPIO, at a high-priority task. Once&nbsp;such event is triggered, the Suspend-service&nbsp;gracefully shuts-down the FAT file-system at the highest priority.
 
Suspend service is available from BSP version 1.3.6 and forth.
 
Usage Guidelines:
 
*To enable the Suspend Service, please set:
<pre>set BSP_SSP=1</pre>
in ''VAR_OM35xx_P.bat''
 
*in ''FILES\platform.reg'' you may choose the appropriate GPIO which triggers the event:
<pre>[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SSP]
  "Prefix"="SSP"
  "Dll"="sspdrv.dll"
  "Index"=dword:0
  "Order"=dword:40
  "GpioId"=dword:6D&nbsp;;GPIO#109
</pre>
==OpenGL==
=== Introduction ===
TI OMAP3530 application processor includes the "PowerVR SGX" Core that provides advanced hardware accelerated support for OpenGL ES and OpenVG graphics. This topic explains how to enable the 3D graphics capabilities under Windows CE.
 
=== PowerVR Installation ===
*Download the latest PowerVR package from Variscite FTP. The file resides in the OMAP/WindowsCE/Release/x.y.z/PowerVR/ folder, where x.y.z should be replaced with the current version.<br>
{{note|'''Note:''' The PowerVR version should be compatible with BSP version. Therefore customer is encouraged to upgrade to the latest BSP release. Otherwise, OpenGL and/or regular display capabilities may be corrupted!|info}}
*Close Visual studio
*Unzip downloaded file to the '''\WINCE600\PUBLIC''' to create in order two subdirectories - '''PowerVR''' and '''PowerVR-SDK'''.
*Open OMAP solution in Platform Builder
*Switch to the Catalog view
*Check all the PowerVR components as it shown on the following picture:
[[File:powervr.JPG]]<br>
{{note|'''Note:''' Only one 3D API may be chosen for the application. Then, unnecessary components from '''3D API''' may be removed in order to reduce OS image size.|info}}
*Perform '''SYSGEN''' build of the solution
 
==EBOOT  ==
=== Overview  ===
 
The VAR-SOM-OM37 implements the standard features set of Microsoft’s EBOOT.<br> The EBOOT is pre-burnt to the SBC in the factory, and is ready for customer use.<br> Variscite doesn’t expose its EBOOT source code, however, in order to enable customers to customize their boot phase, Variscite enables customers to implement the following functions in the Xloader / Eboot.<br>
 
*XLoader Configuration of the PAD MUX – Configures the CPU Balls’ alternate functions
*Xloader Configuration and settings of GPIOs.
*EBOOT LCD Splash screen support for customers’ specific LCD
*Windows CE O.S. pre launch custom function.
 
=== EBOOT customization  ===
 
==== XLDR  ====
 
===== CustomPinMuxSetup() =====
 
This function configures specified pins of the DM37xx processor. The configuration of this function overloads the default configuration of Variscite.<br>
 
{{note|'''Attention:'''<br/> incorrect settings of the OMAP pins may affect proper functionality of the VAR-SOM-OM-37|error}}<br/>
 
The function resides in
<pre>VAR_OMAP37xx_P\SRC\BOOT\XLDR\platfrom.c</pre>
''Code Example'':
<pre>VOID CustomPinMuxSetup()
{
    OMAP_SYSC_PADCONFS_REGS  *pConfig = OALPAtoUA(OMAP_SYSC_PADCONFS_REGS_PA);
    OMAP_SYSC_PADCONFS_WKUP_REGS *pWakeupConfig = OALPAtoUA(OMAP_SYSC_PADCONFS_WKUP_REGS_PA);
 
    /*SDRC*/
    OUTREG16(&amp;pConfig-&gt;CONTROL_PADCONF_SDRC_D0, (INPUT_ENABLE | PULL_INACTIVE | MUX_MODE_4));
    OUTREG16(&amp;pConfig-&gt;CONTROL_PADCONF_SDRC_D1, (INPUT_ENABLE | PULL_INACTIVE | MUX_MODE_4));
}
</pre>
===== CustomGPIOConfigure()  =====
 
This function configures specified pins of the OMAP35xx processor to function as General Purpose IOs. The configuration of this function overloads the default configuration of Variscite.<br>
 
{{note|'''Attention:'''<br/> Incorrect settings of the OMAP pins may affect proper functionality of the VAR-OM35xxSBC.|error}}<br/>
 
The function resides in
<pre>VAR_OMAP35xx_SBC_P\SRC\BOOT\XLDR\platfrom.c</pre>
''Code Example:''
<pre>VOID CustomGPIOConfigure()
{
    OMAP_GPIO_REGS* pGpio;
 
    // Initialize state/direction for Bank1[BIT0] configured as gpio
    pGpio = OALPAtoUA(OMAP_GPIO1_REGS_PA);
    OUTREG32(&amp;pGpio-&gt;DATAOUT, (BIT0));
    OUTREG32(&amp;pGpio-&gt;OE, INREG32(&amp;pGpio-&gt;OE) &amp; ~BIT0);
}
</pre>
==== EBOOT  ====
 
EBOOT files contain a number of functions for configuring the splash-screen for a specific LCD.<br> EBOOT also provides a pre-O.S. launch functions.
 
===== LCD defines  =====
 
The following configurations are required in order to configure EBOOT to work with an alternate LCD.<br>
 
*LCD display size:
<pre>#define LOGO_WIDTH                  xxx
#define LOGO_HEIGHT                yyy
</pre>
Which resides in
<pre>VAR_OMAP35xx_SBC_P\SRC\BOOT\EBOOT\lcd_logo.h</pre>
''Example:''
<pre>#if BSP_AUO_G084SN05_800W_600H
#define LOGO_WIDTH                  800 // Logo bitmap image is RGB24 VGA Landscape bitmap
#define LOGO_HEIGHT                600
#elif BSP_DATAIMAGE_WAG02_800W_480H
#define LOGO_WIDTH                  800 // Logo bitmap image is RGB24 VGA Landscape bitmap
#define LOGO_HEIGHT                480
#else
#define LOGO_WIDTH                  1024 // Logo bitmap image is RGB24 VGA Landscape bitmap
#define LOGO_HEIGHT                768
#endif
 
#define BYTES_PER_PIXEL            3
</pre>
*Define proper timing parameters of the LCD controller.<br>
 
''Example:''
<pre>#elif BSP_AUO_G084SN05_800W_600H
 
    // 800x600 40Hz
 
    #define DEFAULT_PIXELTYPE  DISPC_PIXELFORMAT_RGB16
    // Note: Setting DEFAULT_PIXELTYPE to DISPC_PIXELFORMAT_RGB32 results in a
// dramatic drop in performance in the GDI BLTs, cause is not known.
    //#define DEFAULT_PIXELTYPE  DISPC_PIXELFORMAT_RGB32
    //#define DEFAULT_PIXELTYPE  DISPC_PIXELFORMAT_ARGB32
 
    #define LCD_WIDTH          800
    #define LCD_HEIGHT          600
 
    // Note: HWS, HFP and HBP, program desired value - 1
    #define LCD_HSW          63          // should be 127, out of range for DISPC
    #define LCD_HFP          39
    #define LCD_HBP          87
 
    // Note: for VSW, program desired value - 1
    #define LCD_VSW          3
    // Note: for VFP and VBP, program desired value
    #define LCD_VFP          1
    #define LCD_VBP          23
 
    // DSS1 = DPLL4/11 = 78.5Mhz, divide by 2 = 39.25MHz pixel clock
    // Note: DSS1 clock divider and pixel clock divider are set in src\inc\bsp_cfg.h
    #define LCD_LOGCLKDIV    1
    // Minimum value for LCD_PIXCLKDIV is 2
    #define LCD_PIXCLKDIV    BSP_LCD_PIXCLKDIV
 
    #define LCD_LOADMODE        0
 
    // positive H and V sync
    #define LCD_POLFREQ      ( DISPC_POL_FREQ_IVS | DISPC_POL_FREQ_IHS | /* DISPC_POL_FREQ_IPC |*/ DISPC_POL_FREQ_ONOFF)
 
    #define LCD_DEFAULT_COLOR  0x00000000
    #define LCD_TRANS_COLOR    0x00000000
 
    #define TV_DEFAULT_COLOR    0x00000000
    #define TV_TRANS_COLOR      0x00000000
 
#elif BSP_DATAIMAGE_WAG02_800W_480H
</pre>
Which resides in
<pre>VAR_OMAP35xxSBC_P\SRC\DRIVERS\LCD\VGA\lcd_vga.c</pre>
===== PreLaunch  =====
 
This function is called before launching the O.S.<br> The function resides in
<pre>VAR_OM37xx_P\SRC\BOOT\EBOOT\ prelaunch.c</pre>
''Code Example:''
<pre>void PreLaunch()
{
    OALLog(L"&lt;&gt;\r\n");
    OALLog(L"&lt;&gt; Windows CE Prelaunch code &lt;&gt;\r\n");
    OALLog(L"&lt;&gt;\r\n");
}
</pre>
===== Startup Logo Functions  =====
 
This function displays the pre-downloaded SplashScreen image until OS image is launched.<br> The function resides in
<pre>VAR_OM37xx_P\SRC\BOOT\EBOOT\ bsp_logo.c</pre>
''Code Example:''
<pre>DWORD  g_dwLogoPosX;
DWORD  g_dwLogoPosY;
 
DWORD  g_dwLogoWidth;
DWORD  g_dwLogoHeight;
 
#define BIT28  0x10000000
 
//------------------------------------------------------------------------------
//
//  Function:  ShowLogo
//
//  This function shows the logo splash screen
//
VOID ShowLogo(UINT32 flashAddr, UINT32 offset)
{
/////////////////////////////////////
// See the source file for details //
/////////////////////////////////////
}
 
//------------------------------------------------------------------------------
//
//  Function:  HideLogo
//
//  This function hides the logo splash screen
//
VOID HideLogo(VOID)
{
/////////////////////////////////////
// See the source file for details //
/////////////////////////////////////
}
</pre>
==== XLDR and EBOOT images  ====
 
The XLDR and EBOOT images are built and linked during regular BSP build. In addition, the build will prepare a ready to burn XLDR and EBOOT images. The image files<br>
 
*xldrnand.raw
*ebootnand.raw
 
Both reside at:
<pre>VAR_OMAP35xxSBC_P\target\ARMV4I\retail\</pre>
=== EBOOT Burning  ===
 
==== Installing and configuring the burning utility  ====
 
In order to prepare the burning utility, customer should
 
*Install EVMFlash v.1.2
*Replace targets.xml file in the config\ folder under the root folder of EVM installation. (Typically should be ''C:\Program Files\Texas Instruments\EVMFlash3530_v1.2\config\'')
*Put supplied full_boot.ccf file in ''C:\Program Files\Texas Instruments\EVMFlash3530_v1.2\config\''
 
==== Burning complete Bootloader image  ====
 
The following steps are required for a complete EBOOT / XLDR burning:
 
*Configure correct COM port and baud rate
*Open full_boot.ccf file from menu File-&gt;Open
*Choose Download option under VAR-OMAP35xxSBC target
*Check “NAND” type of device
*Check “Verify Download” check box
*Set download settings as it shown on the following picture
 
[[Image:Evmflash.JPG]]  
 
*Click “Download” button for start download
*Press and hold “Boot Select” button on the carrier board
*Press and release “Reset” button on the carrier board
*Release “Boot Select” button on the carrier board

Latest revision as of 14:05, 22 January 2014

VAR-SOM-OM37 - Windows CE support

Support

Variscite supports its VAR-SOM-OM37 with Windows CE 6 R3 and Windows Embedded compact 7 BSPs.

The BSP provides support for all on-board peripherals. Your Windows CE folder on your CD contains:

  1. Ready-to-run pre-built binaries of the : NK.bin , Eboot, Xloader
  2. Sources files
  3. SDK
  4. C# wrappers for device drivers
  5. OpenGL / PowerVR demos
  6. Sample media contents for playing via the DM3730 hardware acceleration.

Resources