VAR-SOM-MX8M-NANO Release Notes
From Variscite Wiki
VAR-SOM-MX8M-NANO
Release Notes
Yocto dunfell-fslc-5.4-2.1.x-mx8mn-v1.7
Release Notes
Based on release | Yocto: Poky 3.1, BSP: FSLC 3.1, Linux: 5.4-2.1.x-imx |
Release tag | dunfell-fslc-5.4-2.1.x-mx8mn-v1.7 |
Release manifest | default.xml |
Date | 02/25/2022 |
Supported platforms | VAR-SOM-MX8M-NANO |
SOM revision | v1.1 and higher |
File System build system | Yocto Dunfell |
Recovery SD card link | var-som-mx8mn-recovery-sd.v61.img.gz |
Cortex M7 U-Boot support | MCUXPRESSO_2.10.0_V1.0_VAR-SOM-MX8M-NANO |
Cortex M7 Linux remoteproc support | MCUXPRESSO_2.10.0_V1.0_VAR-SOM-MX8M-NANO |
Relevant git Repositories
Source | Repository | Branch | Commit ID |
---|---|---|---|
U-Boot | https://github.com/varigit/uboot-imx | imx_v2020.04_5.4.24_2.1.0_var02 | 2c08669d9e69c202f3fde421fa3b6146b124f24e |
Kernel | https://github.com/varigit/linux-imx | 5.4-2.1.x-imx_var01 | c19da14f4040d6c3f60ab8d97c763262f7b42787 |
meta-variscite-fslc | https://github.com/varigit/meta-variscite-fslc | dunfell | 758e524e03fe50739e66882c722595254c976ba5 |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Change List | Description |
---|---|
Release 1.7 | |
U-Boot: imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY | |
kernel: MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support | |
kernel: imx8_var_defconfig: enable driver for ADIN PHY | |
Release 1.6 | |
meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support for imx8mn, imx8mm and imx8mq | |
kernel: imx8mn-var-som: update the polarity of OV5640 camera reset GPIO | |
kernel: imx8_var_defconfig: add full docker support | |
kernel: Introduce support for pcal6408 | pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A |
kernel: ads7846: fix the pressure_max setting | |
kernel: sn65dsi83: allow swapping LVDS Channel A/B | |
Release 1.5 | |
Updated the kernel version from 5.4.85 to 5.4.142 | |
Update Yocto meta layers to latest:
yocto/poky yocto/meta-freescale oe/meta-openembedded oe/meta-python2 freescale/meta-freescale-3rdparty freescale/meta-freescale-distro freescale/Documentation QT5/meta-qt5 sbabic/meta-swupdate yocto/meta-virtualization varigit/meta-variscite-fslc || | |
linux-firmware: update TI WL18xx BT service pack to v4.7 | |
linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 | |
linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 | |
fsl-image-gui: Add libgpiod and libgpiod-tools | |
Release 1.4 | |
systemd: add dependencies to avoid conflict between connman and systemd-networkd | |
Move bbappend to dynamic layers | |
psplash: switch to using png images for logo and bar | |
pm-utils: wifi: force connman/wpa_supplicant restart | |
Release 1.3 | |
Fixed CAN controller pins | The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins |
Release 1.2 | |
Added support for VAR-SOM-MX8M-NANO revision 1.3 | |
Older VAR-SOM-MX8M-NANO revisions need DTS adjustments for correct CAN operation | See: VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support |
Release 1.1 | |
Upgraded to kernel version 5.4.85 | |
Added support for VAR-SOM-MX8M-NANO on Symphony-Board 1.4A | |
Removed support for VAR-SOM-MX8M-NANO SOM rev. 1.0 | |
Fixed occasional pulseaudio device initialization problems | |
Re-added packages available in previous Yocto releases | |
Added Jailhouse support | |
Release 1.0 | |
Initial Yocto Dunfell release for VAR-SOM-MX8M-NANO |