VAR-SOM-MX7 rev changelog

From Variscite Wiki
Revision as of 14:16, 4 May 2022 by Alex (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

1 VAR-SOM-MX7 changelog

1.1 VAR-SOM-MX7 V1.2

1.1.1 Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer Old MPN New Manufacturer New MPN
Qualcomm AR8033-AL1A-R /
AR8033-AL1B-R
Analog Devices Inc ADIN1300BCPZ

1.1.2 Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:


Release U-Boot Kernel
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) imx_v7_var_defconfig: Enable driver for ADIN PHY
2) net: phy: adin: add adi,phy-mode-override property
3) imx7d-var-som: Override FEC property phy-mode for ADIN PHY
4) imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Thud / B2Qt Thud / Debian Buster (kernel 4.14.78) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Sumo / Debian Stretch (kernel 4.9.88) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: Add 20ms phy-reset-post-delay
Yocto Rocko / Debian Stretch (kernel 4.9.11) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Pyro / Debian Jessie (kernel 4.1.15) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Morty / B2Qt Morty (kernel 4.1.15) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: add 20ms phy-reset-post-delay


1.2 VAR-SOM-MX7-5G V2.1

1.2.1 Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer Old MPN New Manufacturer New MPN
Qualcomm AR8033-AL1A-R /
AR8033-AL1B-R
Analog Devices Inc ADIN1300BCPZ

1.2.2 Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) imx_v7_var_defconfig: Enable driver for ADIN PHY
2) net: phy: adin: add adi,phy-mode-override property
3) imx7d-var-som: Override FEC property phy-mode for ADIN PHY
4) imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Thud / B2Qt Thud / Debian Buster (kernel 4.14.78) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Sumo / Debian Stretch (kernel 4.9.88) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: Add 20ms phy-reset-post-delay
Yocto Rocko / Debian Stretch (kernel 4.9.11) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Pyro / Debian Jessie (kernel 4.1.15) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: add 20ms phy-reset-post-delay
Yocto Morty / B2Qt Morty (kernel 4.1.15) mx7dvar_som: Add support for Analog Devices ADIN1300 PHY 1) net: fec: add post PHY reset delay DT property
2) imx7d-var-som: fec: add 20ms phy-reset-post-delay