MX8 e-con Camera

From Variscite Wiki
DART-MX8M-MINI e-con Systems Camera

Introduction

The following instructions will allow you to add support for the e-con Systems MIPI camera VCAM-AR1335E to your Yocto images.
This will allow you to stream images/video from a e-con Systems camera VCAM-AR1335E connected to a Variscite evaluation kit.

Download the Variscite Yocto BSP

Please follow Build Yocto from source code.
Execute steps 1-4.3 to download the BSP sources, but don't run bitbake yet.

Download and install the e-con meta layers

$ wget ftp://customerv:Variscite1@ftp.variscite.com/e-con/Software/sumo-fsl-4.14.98/meta-econ-imx8.tar.gz
$ tar xf meta-econ-imx8.tar.gz -C ../sources
$ wget ftp://customerv:Variscite1@ftp.variscite.com/e-con/Software/sumo-fsl-4.14.98/meta-variscite-imx-econ.tar.gz
$ tar xf meta-variscite-imx-econ.tar.gz -C ../sources

Customize configuration files

Customize bblayers.conf

Add the following lines to conf/bblayers.conf under your Yocto build directory:

BBLAYERS += " ${BSPDIR}/sources/meta-econ-imx8 "
BBLAYERS += " ${BSPDIR}/sources/meta-variscite-imx-econ "


Build a Yocto image

Continue following Build Yocto from source code from where you left off, to bitbake and install an image.

Testing the e-con Systems camera

Follow the DART-MX8M-MINI Camera page to test the camera.