Linux CAN bus

From Variscite Wiki
Revision as of 15:22, 9 February 2022 by Pierluigi (talk | contribs)
CAN bus

Connect two boards like the following:

Board A   Board B

 CAN_H --- CAN_H
 CAN_L --- CAN_L
  GND ----- GND

Set up the boards by running the following on each of them:

# ip link set can0 up type can bitrate 125000

On board A:

# candump can0

On board B:

# cansend can0 500#1E.10.10