Linux CAN bus: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
Line 23: Line 23:


{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS |
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS |
For DART-MX8M-PLUS SoMs, the reference interface is can2 instead of can0.
'''Note''': For DART-MX8M-PLUS SoMs, the reference interface is can2 instead of can0.
|}}
|}}



Revision as of 14:22, 9 February 2022

CAN bus

Connect two boards like the following:

Board A   Board B

 CAN_H --- CAN_H
 CAN_L --- CAN_L
  GND ----- GND

Set up the boards by running the following on each of them:

# ip link set can0 up type can bitrate 125000

Then:
On board A:

# candump can0

On board B:

# cansend can0 500#1E.10.10