DART-MX8M CSI: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
Line 24: Line 24:
</pre>
</pre>
As you can see above there are 2 cameras accessible as /dev/video0 and /dev/video1
As you can see above there are 2 cameras accessible as /dev/video0 and /dev/video1
| {{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS |
<pre>
ev ():
        /dev/v4l-subdev0
mxc-isi-cap (platform:32e00000.isi:cap_devic):
        /dev/video1
mxc-isi-m2m (platform:32e00000.isi:m2m_devic):
        /dev/video0
mxc-isi-cap (platform:32e02000.isi:cap_devic):
        /dev/video2
</pre>
As you can see above there are 2 cameras accessible as /dev/video1 and /dev/video2
|
|
<pre>
<pre>
Line 31: Line 46:
</pre>
</pre>
As you can see above there is 1 camera accessible as /dev/video0
As you can see above there is 1 camera accessible as /dev/video0
}}
}}}}


== Testing Camera Preview on Display ==
== Testing Camera Preview on Display ==
Line 37: Line 52:
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M |
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M |
In the examples below /dev/videoX is either /dev/video0 or /dev/video1
In the examples below /dev/videoX is either /dev/video0 or /dev/video1
* 480P 640x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=640,height=480 ! autovideosink sync=false
* NTSC 720x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=720,height=480 ! autovideosink sync=false
* 720P 1280x720@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1280,height=720 ! autovideosink sync=false
* 1080P: 1920x1080@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1920,height=1080 ! autovideosink sync=false
* QSXGA 2592x1944@15fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=2592,height=1944 ! autovideosink sync=false
| {{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS |
In the examples below /dev/videoX is either /dev/video1 or /dev/video2


* 480P 640x480@30fps:
* 480P 640x480@30fps:
Line 67: Line 99:
* QSXGA 2592x1944@15fps:
* QSXGA 2592x1944@15fps:
  # gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=2592,height=1944 ! autovideosink sync=false
  # gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=2592,height=1944 ! autovideosink sync=false
}}
}}}}
== Testing Camera JPEG Snapshot ==
== Testing Camera JPEG Snapshot ==


Line 73: Line 105:
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M |
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M |
<br>In the examples below /dev/videoX is either /dev/video0 or /dev/video1
<br>In the examples below /dev/videoX is either /dev/video0 or /dev/video1
* 480P 640x480:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=640,height=480  ! jpegenc ! filesink location=/tmp/test.jpg
* NTSC 720x480:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=720,height=480  ! jpegenc ! filesink location=/tmp/test.jpg
* 720P 1280x720:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=1280,height=720  ! jpegenc ! filesink location=/tmp/test.jpg
* 1080P 1920x1080:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=1920,height=1080 ! jpegenc ! filesink location=/tmp/test.jpg
* QSXGA 2592x1944:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg
| {{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS |
<br>In the examples below /dev/videoX is either /dev/video1 or /dev/video2


* 480P 640x480:
* 480P 640x480:
Line 103: Line 152:
* QSXGA 2592x1944:
* QSXGA 2592x1944:
  # gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg
  # gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg
}}
}}}}
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M |
{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M |
== Using both cameras simultaneously ==
== Using both cameras simultaneously ==
Line 112: Line 161:
  # gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test0.avi \
  # gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test0.avi \
                   v4l2src device=/dev/video1 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test1.avi
                   v4l2src device=/dev/video1 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test1.avi
|{{#ifeq: {{#var:HARDWARE_NAME}} | DART-MX8M-PLUS |
== Using both cameras simultaneously ==
The following pipeline is an example of using both cameras simultaneously.<br>
In this example a short video stream from each camera is saved as an H.264-encoded AVI file.
# gst-launch-1.0 v4l2src device=/dev/video1 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! vpuenc_h264 ! avimux ! filesink location=./test0.avi \
                  v4l2src device=/dev/video2 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! vpuenc_h264 ! avimux ! filesink location=./test1.avi
|
|
}}
}}}}

Revision as of 12:29, 2 November 2020

DART-MX8M Camera

Testing MIPI-CSI2 cameras

Before running any of the pipelines below make sure you have camera(s) connected. i.MX family of processors uses gstreamer as multimedia framework. Please refer to https://gstreamer.freedesktop.org/

Camera Probe

Run the following command to see if you have the camera(s) detected

# v4l2-ctl --list-devices

This should produce the following output

# v4l2-ctl --list-devices
i.MX6S_CSI (platform:30a90000.csi1_bridge):
      /dev/video0

i.MX6S_CSI (platform:30b80000.csi2_bridge):
      /dev/video1

As you can see above there are 2 cameras accessible as /dev/video0 and /dev/video1

Testing Camera Preview on Display

In the examples below /dev/videoX is either /dev/video0 or /dev/video1

  • 480P 640x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=640,height=480 ! autovideosink sync=false
  • NTSC 720x480@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=720,height=480 ! autovideosink sync=false
  • 720P 1280x720@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1280,height=720 ! autovideosink sync=false
  • 1080P: 1920x1080@30fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=1920,height=1080 ! autovideosink sync=false
  • QSXGA 2592x1944@15fps:
# gst-launch-1.0 v4l2src device=/dev/videoX ! video/x-raw,width=2592,height=1944 ! autovideosink sync=false

Testing Camera JPEG Snapshot

To capture JPEG snapshot run one of the pipelines below depending upon the required picture resolution.
In the examples below /dev/videoX is either /dev/video0 or /dev/video1

  • 480P 640x480:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=640,height=480   ! jpegenc ! filesink location=/tmp/test.jpg
  • NTSC 720x480:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=720,height=480   ! jpegenc ! filesink location=/tmp/test.jpg
  • 720P 1280x720:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=1280,height=720  ! jpegenc ! filesink location=/tmp/test.jpg
  • 1080P 1920x1080:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=1920,height=1080 ! jpegenc ! filesink location=/tmp/test.jpg
  • QSXGA 2592x1944:
# gst-launch-1.0 v4l2src device=/dev/videoX num-buffers=1 ! video/x-raw,width=2592,height=1944 ! jpegenc ! filesink location=/tmp/test.jpg

Using both cameras simultaneously

The following pipeline is an example of using both cameras simultaneously.
In this example a short video stream from each camera is saved as an MJPEG-encoded AVI file.

# gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test0.avi \
                 v4l2src device=/dev/video1 num-buffers=100 ! video/x-raw,width=1920,height=1080 ! jpegenc ! avimux ! filesink location=./test1.avi