DART-MX8M-PLUS Release Notes
From Variscite Wiki
DART-MX8M-PLUS
/ VAR-SOM-MX8M-PLUS Release Notes
Yocto hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.3
Release Notes
Based on release | Yocto: Poky 3.3, BSP: NXP L5.10.52_2.1.0, Linux: lf-5.10.y |
Release tag | hardknott-fsl-5.10.52_2.1.0-mx8mp-v1.3 |
Release manifest | imx-5.10.52-2.1.0-var01.xml |
Date | 04/04/2022 |
Supported platforms | DART-MX8M-PLUS / VAR-SOM-MX8M-PLUS |
SOM revision | v1.1 and higher |
File System build system | Yocto Hardknott |
Recovery SD card link | dart-mx8mp-recovery-sd.v74.img.gz |
Cortex M7 U-Boot support | MCUXPRESSO_2.10.0_V1.0_DART-MX8M-PLUS |
Cortex M7 Linux remoteproc support | MCUXPRESSO_2.10.0_V1.0_DART-MX8M-PLUS |
Relevant git Repositories
Source | Repository | Branch | Commit ID |
---|---|---|---|
U-Boot | https://github.com/varigit/uboot-imx | lf_v2021.04_var02 | 7cad2ff68a508c71c572151a85bc786711bab969 |
Kernel | https://github.com/varigit/linux-imx | lf-5.10.y_var03 | 8cc57fc3c7bfa4e2b68a2af423c8b7b117451c78 |
meta-variscite-imx | https://github.com/varigit/meta-variscite-imx | hardknott-imx-5.10.52-var01 | 7e9d61aafef9c03d5fb4c59a6140c4b46d95efcf |
Note: Some web browsers have removed FTP support. Please see our FTP wiki page or download using the command line:
$ wget https://variscite.hosted-by-files.com/General/DART-MX8M-PLUS/Software/dart-mx8mp-recovery-sd.v74.img.gz
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Change List | Description |
---|---|
Release 1.3 | |
U-Boot updates | |
Read carrier_rev from EEPROM | |
Add support for ADIN1300 | |
Fix SOM PHY reset when using legacy DT8MCustomBoard revisions | |
Set AR8033 VDDH_REG to 1.8V on Symphony-Board and DT8MCustomBoard | |
Linux updates | |
imx8_var_defconfig: enable driver for ADIN PHY | ADIN1300 replaces AR8033 on DART-MX8M-PLUS 1.3, VAR-SOM-MX8M-PLUS 1.3, DT8MCustomBoard 3.0 and Symphony-Board 1.6 |
MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support | |
Release 1.2 | |
Meta-variscite-imx updates | |
imx-atf: Switch to branch lf_v2.4_var03 | |
Release 1.1 | |
Linux Updates | |
imx8mp-var-dart: Introduce support for pcal6408 | pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A |
gpio: pca953x: Introduce standard-regs-fallback property | |
gpio: pca953x: Introduce support for nxp,pcal6408 | |
wm8904: Initialize ADC 128x OSR Switch control to default value | |
dmaengine: imx-sdma: Start in suspended runtime | |
arm64: imx8_var_defconfig: add full Docker support | |
U-Boot Updates | |
imx8mp-var-som-symphony: Add gpio-hog-optional property to pca9534 gpio-hogs | |
gpio: uclass: Introduce gpio-hog-optional property | |
Release 1.0 | |
Initial Yocto Hardknott based on NXP L5.10.52_2.1.0 release | (kernel 5.10.52) |
Added remoteproc support to load and run M7 firmwares from Linux userspace |