Yocto Platform Customization

Yocto

Documentation

Thud 2.6.2

• Yocto Project Core - Thud 2.6.2

Documentation is available from www.yoctoproject.org

Sumo 2.5

• Yocto Project Core - Sumo 2.5

Documentation is available from www.yoctoproject.org

Rocko 2.4.3

• Yocto Project Core - Rocko 2.4.3

Documentation is available from www.yoctoproject.org

Rocko 2.4.1

• Yocto Project Core - Rocko 2.4.1

Documentation is available from www.yoctoproject.org

Rocko 2.4

• Yocto Project Core - Rocko 2.4

Documentation is available from www.yoctoproject.org

Pyro 2.3.1

• Yocto Project Core - Pyro 2.3.1 (released on 07/21/2017)

Documentation is available from www.yoctoproject.org

Morty 2.2.1

• Yocto Project Core - Morty 2.2.1 (released on 02/24/2017)

Documentation is available from www.yoctoproject.org

FSLC BSP 2.5

• FSL Community BSP Release Notes 2.5 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.4

• FSL Community BSP Release Notes 2.4 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.3

• FSL Community BSP Release Notes 2.3 documentation

Documentation is available from http://freescale.github.io

FSLC BSP 2.2

• FSL Community BSP Release Notes 2.2 documentation

Documentation is available from http://freescale.github.io

FSL BSP L4.1.15_2.0.0-ga

• Kernel documentation from fsl-yocto-L4.1.15_2.0.0-ga release

Documentation is available for download from fsl-yocto-imx-4.1.15_2.0.0-docs

VAR-SOM-MX6

Build Results

Image Name	Description
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB.
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB.
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

Device Tree Name	SOM type	Carrier Board type	LCD Type	Evaluation Kit name
uImage-imx6q-var-som-cap.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-MX6CustomBoard	Capacitive touch	VAR-DVK-MX6_V2-PRO VAR-STK-MX6_V2
uImage-imx6q-var-som-res.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-MX6CustomBoard	Resistive touch	VAR-DVK-MX6_V2-PRO VAR-STK-MX6_V2
uImage-imx6q-var-som-vsc.dtb	VAR-SOM-MX6_V2 (Quad / Dual)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6dl-var-som-cap.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6dl-var-som-res.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6dl-var-som-vsc.dtb	VAR-SOM-MX6_V2 (DualLite / Solo)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6qp-var-som-cap.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6qp-var-som-res.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6qp-var-som-vsc.dtb	VAR-SOM-MX6_V2 (QuadPlus / DualPlus)	VAR-SOLOCustomBoard	Capacitive LVDS touch	N/A
uImage-imx6dl-var-som-solo-cap.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-MX6CustomBoard	Capacitive touch	N/A
uImage-imx6dl-var-som-solo-res.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-MX6CustomBoard	Resistive touch	N/A
uImage-imx6dl-var-som-solo-vsc.dtb	VAR-SOM-SOLO / VAR-SOM-DUAL	VAR-SOLOCustomBoard	Capacitive LVDS touch	VAR-DVK-SOLO/DUAL VAR-STK-SOLO/DUAL
uImage-imx6q-var-dart.dtb	DART-MX6	VAR-DT6CustomBoard	Capacitive LVDS touch	VAR-DVK-DT6 VAR-STK-DT6

Device trees

Build individual device trees:

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-solo-cap.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-solo-res.dtb

Build the device tree for VAR-SOM-SOLO on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-solo-vsc.dtb

Build the device tree for DART-MX6:
$ make -j4 imx6q-var-dart.dtb

Device trees with Symphony-Board

Build individual device trees:

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on Symphony-Board:
$ make -j4 imx6dl-var-som-symphony.dtb

Build the device tree for VAR-SOM-MX6 Dualite/Solo on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6q-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6q-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on Symphony-Board:
$ make -j4 imx6q-var-som-symphony.dtb

Build the device tree for VAR-SOM-MX6 Quad/Dual on VAR-SOLOCustomBoard:
$ make -j4 imx6q-var-som-vsc.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6qp-var-som-cap.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6qp-var-som-res.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on Symphony-Board:
$ make -j4 imx6qp-var-som-symphony.dtb

Build the device tree for VAR-SOM-MX6 QuadPlus/DualPlus on VAR-SOLOCustomBoard:
$ make -j4 imx6qp-var-som-vsc.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with capacitive touchscreen:
$ make -j4 imx6dl-var-som-solo-cap.dtb

Build the device tree for VAR-SOM-SOLO on VAR-MX6CustomBoard with resistive touchscreen:
$ make -j4 imx6dl-var-som-solo-res.dtb

Build the device tree for VAR-SOM-SOLO on VAR-SOLOCustomBoard:
$ make -j4 imx6dl-var-som-solo-vsc.dtb

Build the device tree for VAR-SOM-SOLO on Symphony-Board:
$ make -j4 imx6dl-var-som-solo-symphony.dtb

Build the device tree for DART-MX6:
$ make -j4 imx6q-var-dart.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-vsc.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage

SD card image file tree with Symphony-Board

/opt/images/
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-symphony.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-symphony.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── imx6qp-var-som-cap.dtb
    ├── imx6qp-var-som-res.dtb
    ├── imx6qp-var-som-symphony.dtb
    ├── imx6qp-var-som-vsc.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage

Flash Recovery SD from GUI

Flash from GUI

Click the appropriate button:

• Install Yocto SOLOCB NAND: Flash Yocto on NAND flash, on VAR-SOLOCustomBoard
• Install Yocto SOLOCB eMMC: Flash Yocto on eMMC, on VAR-SOLOCustomBoard
• Install Yocto MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on VAR-MX6CustomBoard
• Install Yocto MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on VAR-MX6CustomBoard
• Install Yocto MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX6CustomBoard
• Install Yocto MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX6CustomBoard
• Install Yocto DART (eMMC): Flash Yocto on eMMC, on VAR-DT6CustomBoard

Flash from GUI

For this Yocto release, NXP/Vivante do no longer provide GPU accelerations for X11 native backend.

The default backend is now XWayland: Wayland accelerated backend with basic (not accelerated) X11 emulation.

Only "Flash from command line" is supported.

Setting the Boot Mode

Follow the instruction below according to the appropriate carrier board type:

MX6CustomBoard

Booting your MX6CustomBoard system from SD card requires pushing the middle button while powering up the system. See picture below.

To boot a board using an SD card, follow the steps below:

• Power-off the board.
• Insert the SD card into the SD/MMC slot of the carrier board (DVK)
• Push the middle button (Boot Select) and hold
• Power-up the board
• Release the middle button (Boot Select) after system starts to boot.
• The board will automatically boot into Linux from the SD card

SoloCustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from MMC". See picture below.

To boot board with SD card, Follow the steps below:

• Power-off the board.
• Insert the SD card into the SD/MMC slot of the carrier board (DVK)
• Switch the relevant DIP switch to "Boot from MMC"
• Power-up board
• The board will automatically boot into Linux from SD card

DT6CustomBoard

Booting your system requires switching the relevant DIP switch to "Boot from SD card". See picture below.

To boot board with SD card, Follow the steps below:

• Power-off the board.
• Insert the SD card into the SD/MMC slot of the carrier board (DVK)
• Switch the relevant DIP switch to "Boot from SD card"
• Power-up board
• The board will automatically boot into Linux from SD card

DART-6UL

Build Results

Image Name	How to use
fsl-image-gui-.sdcard	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash.
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx6ul-var-dart-emmc_wifi.dtb	Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb	Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb	Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb	Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb	Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb	Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb	Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb	Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx6ul-var-dart-emmc_wifi.dtb	Device tree blob for DART-6UL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-nand_wifi.dtb	Device tree blob for DART-6UL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-5g-emmc_wifi.dtb	Device tree blob for DART-6UL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ul-var-dart-5g-nand_wifi.dtb	Device tree blob for DART-6UL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ul-var-dart-sd_emmc.dtb	Device tree blob for DART-6UL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ul-var-dart-sd_nand.dtb	Device tree blob for DART-6UL with SD card & NAND flash enabled (WIFI & eMMC disabled)
zImage-imx6ull-var-dart-emmc_wifi.dtb	Device tree blob for DART-6ULL with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-nand_wifi.dtb	Device tree blob for DART-6ULL with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-5g-emmc_wifi.dtb	Device tree blob for DART-6ULL-5G with eMMC & WI-FI enabled. (SD card & NAND disabled)
zImage-imx6ull-var-dart-5g-nand_wifi.dtb	Device tree blob for DART-6ULL-5G with NAND flash & WI-FI enabled. (SD card & eMMC disabled)
zImage-imx6ull-var-dart-sd_emmc.dtb	Device tree blob for DART-6ULL with SD card & eMMC enabled (WIFI & NAND disabled)
zImage-imx6ull-var-dart-sd_nand.dtb	Device tree blob for DART-6ULL with SD card & NAND flash enabled (WIFI & eMMC disabled)

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb	Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-concerto-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-concerto-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-concerto-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ull-var-som-symphony-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ull-var-som-symphony-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ull-var-som-symphony-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ull-var-som-symphony-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ul-var-som-symphony-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ul-var-som-symphony-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ul-var-som-symphony-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ul-var-som-symphony-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)
imx6ulz-var-som-symphony-board-emmc-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled)
imx6ulz-var-som-symphony-board-emmc-wifi.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled)
imx6ulz-var-som-symphony-board-nand-sd-card.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled)
imx6ulz-var-som-symphony-board-nand-wifi.dtb	Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled)

Device tree

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-sd_emmc.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-5g-emmc_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-nand_wifi.dtb

Build only the device tree for DART-6UL-5G with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-5g-nand_wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-sd_nand.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb

Build only the device tree for DART-6UL with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-concerto-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-concerto-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC and SD card:
$ make -j4 imx6ull-var-som-symphony-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC and WiFi:
$ make -j4 imx6ull-var-som-symphony-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash and SD card:
$ make -j4 imx6ull-var-som-symphony-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash and WiFi:
$ make -j4 imx6ull-var-som-symphony-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC and SD card:
$ make -j4 imx6ul-var-som-symphony-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC and WiFi:
$ make -j4 imx6ul-var-som-symphony-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash and SD card:
$ make -j4 imx6ul-var-som-symphony-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash and WiFi:
$ make -j4 imx6ul-var-som-symphony-board-nand-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC and SD card:
$ make -j4 imx6ulz-var-som-symphony-board-emmc-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC and WiFi:
$ make -j4 imx6ulz-var-som-symphony-board-emmc-wifi.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash and SD card:
$ make -j4 imx6ulz-var-som-symphony-board-nand-sd-card.dtb

Build only the device tree for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash and WiFi:
$ make -j4 imx6ulz-var-som-symphony-board-nand-wifi.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ul-var-dart-5g-emmc_wifi.dtb
    ├── imx6ul-var-dart-5g-nand_wifi.dtb
    ├── imx6ul-var-dart-emmc_wifi.dtb
    ├── imx6ul-var-dart-nand_wifi.dtb
    ├── imx6ul-var-dart-sd_emmc.dtb
    ├── imx6ul-var-dart-sd_nand.dtb
    ├── imx6ull-var-dart-5g-emmc_wifi.dtb
    ├── imx6ull-var-dart-5g-nand_wifi.dtb
    ├── imx6ull-var-dart-emmc_wifi.dtb
    ├── imx6ull-var-dart-nand_wifi.dtb
    ├── imx6ull-var-dart-sd_emmc.dtb
    ├── imx6ull-var-dart-sd_nand.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ull-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ull-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ull-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ull-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ull-var-som-symphony-board-nand-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ul-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ul-var-som-symphony-board-nand-wifi.dtb
    ├── imx6ul-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
    ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
    ├── imx6ulz-var-som-symphony-board-emmc-sd-card.dtb
    ├── imx6ulz-var-som-symphony-board-emmc-wifi.dtb
    ├── imx6ulz-var-som-symphony-board-nand-sd-card.dtb
    ├── imx6ulz-var-som-symphony-board-nand-wifi.dtb
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── rootfs.tar.gz
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

Flash Recovery SD from GUI

Flash from GUI

Touch/Click on the appropriate icon:

• Install Yocto NAND, WiFi: Flash Yocto with WiFi support to NAND flash
• Install Yocto NAND, SD card: Flash Yocto with SD card support to NAND flash
• Install Yocto eMMC (SD/WiFi) : Flash Yocto to eMMC (installs both SD card and WiFi dtbs to the BOOT partition and let U-Boot select between them at boot time)

Setting the Boot Mode

Booting your system from an SD card requires switching the Boot DIP switches. See picture below.

• "00" The current position in the picture will set the system to boot from SD card
• "01" Moving the right switch will set the system to boot from eMMC
• "10" Moving the left switch will set the system to boot from NAND flash
• "11" is illegal.

Be aware that your system has eMMC or NAND but never both.

Booting your system from an SD card requires switching the Boot DIP switches. See picture below.
On the VAR-6ULCustomBoard (with a DART-6UL):

• "00" The current position in the picture will set the system to boot from SD card
• "01" Moving the right switch will set the system to boot from eMMC
• "10" Moving the left switch will set the system to boot from NAND flash
• "11" is illegal.

Be aware that your system has eMMC or NAND but never both.

On the Concerto-Board (with a VAR-SOM-6UL):

• ON-EXT: Boot from the external storage (SD card) - the current position in the picture
• OFF-INT: Boot from the SOM's internal storage (eMMC/NAND flash)

Using only one Ethernet port

Apply the following patch to the Linux kernel source, for removing the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:

diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
index f79a356..032ed00 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-var-dart-common.dtsi
@@ -159,17 +159,6 @@
 	phy-reset-on-resume;
 	phy-handle = <&ethphy0>;
 	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	phy-reset-gpios=<&gpio1 10 1>;
-	phy-reset-duration=<100>;
-	phy-reset-on-resume;
-	status = "okay";
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -181,14 +170,6 @@
 			clock-names = "rmii-ref";
 			reg = <1>;
 		};
-
-		ethphy1: ethernet-phy@3 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			micrel,rmii-reference-clock-select-25-mhz;
-			clocks = <&rmii_ref_clk>;
-			clock-names = "rmii-ref";
-			reg = <3>;
-		};
 	};
 };
 
@@ -460,8 +441,8 @@
 			fsl,pins = <
 				MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x1b0b0	/* User LED */
 				MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x17059	/* User Button */
-				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
 #ifdef WIFI
 				MX6UL_PAD_GPIO1_IO03__REF_CLK_32K	0x03029	/* WLAN Slow Clock */
 #endif
@@ -481,20 +462,6 @@
 			>;
 		};
 
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-				MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
-			>;
-		};
-
 		pinctrl_flexcan1: flexcan1grp{
 			fsl,pins = <
 				MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020

Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.
- In older kernel releases where there is no imx6ul-imx6ull-var-dart-common.dtsi file, the relevant file to edit is called imx6ul-var-dart.dtsi

To remove the second Ethernet port, in case your own custom carrier board only has one and doesn't have the second Ethernet phy:
Edit the dtsi file of the reference carrier board in the Linux kernel source and remove the &fec1 and &fec2 nodes from it.
In case of the VAR-6ULCustomBoard (DART-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-dart-6ulcustomboard.dtsi.
In case of the Concerto-Board (VAR-SOM-6UL carrier), the file is arch/arm/boot/dts/imx6ul-imx6ull-var-som-concerto-board.dtsi.
The above will result in using the &fec1 node from the dtsi file of the SOM, as is (as the phy of the first Ethernet port is on the SOM), without adding the second port (which its phy is on the reference carrier board).
Notes:
- You can follow the "Build Linux from source code" guide to get the Linux kernel source, apply the above patch, build only the device trees and copy them to your SD card.

VAR-SOM-MX7

Build Results

Image Name	How to use
fsl-image-gui-.	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
fsl-image-gui-_128kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 128KiB PEB
fsl-image-gui-_256kbpeb.ubi	A complete UBI image containing a UBIFS volume, for writing to NAND flash with 256KiB PEB
	Linux kernel image, same binary for SD card/eMMC or NAND flash.
	SPL built for SD card boot or eMMC boot.
	SPL built for NAND flash.
	U-Boot built for SD card boot or eMMC boot.
	U-Boot built for NAND flash.

File Name	Description
zImage-imx7d-var-som-emmc.dtb	Device tree blob for SOMs with eMMC.
zImage-imx7d-var-som-nand.dtb	Device tree blob for SOMs with NAND flash.
zImage-imx7d-var-som-emmc-m4.dtb	Device tree blob for SOMs with eMMC and M4 support.
zImage-imx7d-var-som-nand-m4.dtb	Device tree blob for SOMs with NAND flash and M4 support.

Device tree

Build only the device tree for VAR-SOM-MX7 with eMMC:
$ make -j4 imx7d-var-som-emmc.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash:
$ make -j4 imx7d-var-som-nand.dtb

Build only the device tree for VAR-SOM-MX7 with eMMC and M4 support:
$ make -j4 imx7d-var-som-emmc-m4.dtb

Build only the device tree for VAR-SOM-MX7 with NAND flash and M4 support:
$ make -j4 imx7d-var-som-nand-m4.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── u-boot.imx-nand
    ├── u-boot.imx-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

/opt/images/
└── Yocto
    ├── imx7d-var-som-emmc.dtb
    ├── imx7d-var-som-nand.dtb
    ├── imx7d-var-som-emmc-m4.dtb
    ├── imx7d-var-som-nand-m4.dtb
    ├── rootfs.tar.gz
    ├── rootfs_128kbpeb.ubi
    ├── rootfs_256kbpeb.ubi
    ├── SPL-nand
    ├── SPL-sd
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── zImage

Flash Recovery SD from GUI

Flash from GUI

Touch/Click on the appropriate icon:

• Install Yocto NAND flash: Flash Yocto to NAND flash
• Install Yocto eMMC: Flash Yocto to eMMC

Setting the Boot Mode

Make sure the BOOT SELECT DIP switches on the carrier board are set correctly before you power on the board.

SW1-SW2
 0 - 0 : Boot from SD card
 1 - 0 : Boot from eMMC
 0 - 1 : Boot from NAND flash
 1 - 1 : Illegal

The VAR-SOM-MX7 SOM comes with either NAND or eMMC, but not both.

DART-MX8M

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-imx8m-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-hdmi-4k.dtb	Device tree blob for eMMC, WIFI and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dcss-lvds.dtb	Device tree blob for eMMC, WIFI and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb	Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration.
Image.gz-imx8m-var-dart-sd-emmc-hdmi-4k.dtb	Device tree blob for SD, eMMC and HDMI 4K display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dcss-lvds.dtb	Device tree blob for SD, eMMC and DCSS LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-lcdif-lvds.dtb	Device tree blob for SD, eMMC and LCDIF LVDS display configuration.
Image.gz-imx8m-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb	DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb	DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb	DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb	DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb	DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb	DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb	DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds.dtb	DTB for DART-MX8M with SD card and LCDIF LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb	DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb	DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb	DTB for DART-MX8M with SD card and LCDIF LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb	DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mq-var-dart-sd-dp.dtb	DTB for DART-MX8M with SD card and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi.dtb	DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds.dtb	DTB for DART-MX8M with SD card and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-dp.dtb	DTB for DART-MX8M with SD card and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb	DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb	DTB for DART-MX8M with SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-cb12.dtb	DTB for DART-MX8M with SD card and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb	DTB for DART-MX8M with SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-dp.dtb	DTB for DART-MX8M with WIFI and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi.dtb	DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds.dtb	DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-dp.dtb	DTB for DART-MX8M with WIFI and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb	DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb	DTB for DART-MX8M with WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb	DTB for DART-MX8M with WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb	DTB for DART-MX8M with WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-dp.dtb	DTB for DART-MX8M with M4, SD card and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi.dtb	DTB for DART-MX8M with M4, SD card and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds.dtb	DTB for DART-MX8M with M4, SD card and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb	DTB for DART-MX8M with M4, SD card and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb	DTB for DART-MX8M with M4, SD card and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb	DTB for DART-MX8M with M4, SD card and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb	DTB for DART-MX8M with M4, SD card and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb	DTB for DART-MX8M with M4, SD card and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-dp.dtb	DTB for DART-MX8M with M4, WIFI and DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb	DTB for DART-MX8M with M4, WIFI and HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds.dtb	DTB for DART-MX8M with M4, WIFI and LVDS display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb	DTB for DART-MX8M with M4, WIFI and dual LVDS+DP display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb	DTB for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support on carrier board revisions 1.3 and higher.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb	DTB for DART-MX8M with M4, WIFI and HDMI display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb	DTB for DART-MX8M with M4, WIFI and LVDS display support on carrier board revisions 1.1 and 1.2.
Image.gz-fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb	DTB for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support on carrier board revisions 1.1 and 1.2.

Image Name	How to use
fsl-image-gui-.wic.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display.

Device tree

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI 4K display support:
$ make -j4 imx8m-var-dart-emmc-wifi-hdmi-4k.dtb

Build only the device tree for DART-MX8M with WIFI and DCSS LVDS display support:
$ make -j4 imx8m-var-dart-emmc-wifi-dcss-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and LCDIF LVDS display support:
$ make -j4 imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 imx8m-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M with SD, and HDMI display support:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M with SD, and HDMI 4K display support:
$ make -j4 imx8m-var-dart-sd-emmc-hdmi-4k.dtb

Build only the device tree for DART-MX8M with SD, and DCSS LVDS display support:
$ make -j4 imx8m-var-dart-sd-emmc-dcss-lvds.dtb

Build only the device tree for DART-MX8M with SD, and LCDIF LVDS display support:
$ make -j4 imx8m-var-dart-sd-emmc-lcdif-lvds.dtb

Build only the device tree for DART-MX8M with SD, and dual LVDS+HDMI display support:
$ make -j4 imx8m-var-dart-sd-emmc-dual-display.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb

Build only the device tree for DART-MX8M with SD, and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb

Build only the device tree for DART-MX8M with SD, and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-lvds.dtb

Build only the device tree for DART-MX8M with SD, and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb

Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-dp.dtb

Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-hdmi.dtb

Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-dp.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-sd-dp.dtb

Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-sd-hdmi.dtb

Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-dp.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-dp.dtb

Build only the device tree for DART-MX8M with SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb

Build only the device tree for DART-MX8M with SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-dp.dtb

Build only the device tree for DART-MX8M with WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M with M4, SD and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, SD and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M with M4, WIFI and LVDS display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+DP display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M with M4, WIFI and dual LVDS+HDMI display support:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb

Build only the device tree for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display:
$ make -j4 freescale/imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_dp_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    ├── imx-boot-imx8mq-var-dart-sd.bin-flash_evk_no_hdmi
    ├── imx-boot-sd.bin -> imx-boot-imx8mq-var-dart-sd.bin-flash_evk
    └── rootfs.tar.gz

DTB File Name	Description
imx8m-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-hdmi-4k.dtb	Device tree blob for eMMC, WIFI and HDMI 4K display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dcss-lvds.dtb	Device tree blob for eMMC, WIFI and DCSS LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-lcdif-lvds.dtb	Device tree blob for eMMC, WIFI and LCDIF LVDS display configuration. SD card disabled.
imx8m-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
imx8m-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-hdmi-4k.dtb	Device tree blob for SD, eMMC and HDMI 4K display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dcss-lvds.dtb	Device tree blob for SD, eMMC and DCSS LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-lcdif-lvds.dtb	Device tree blob for SD, eMMC and LCDIF LVDS display configuration. WIFI disabled.
imx8m-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.

DTB File Name	Description
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb	Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb	Device tree blob for SD, eMMC and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb	Device tree blob for SD, eMMC and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb	Device tree blob for SD, eMMC and dual LVDS+HDMI display configuration. WIFI disabled.

DTB File Name	Description
fsl-imx8mq-var-dart-sd-dp.dtb	Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-hdmi.dtb	Device tree blob for eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds.dtb	Device tree blob for eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-dp.dtb	Device tree blob for eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb	Device tree blob for eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-wifi-dp.dtb	Device tree blob for eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-hdmi.dtb	Device tree blob for eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds.dtb	Device tree blob for eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-dp.dtb	Device tree blob for eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb	Device tree blob for eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-sd-dp.dtb	Device tree blob for eMMC, SD and DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-hdmi.dtb	Device tree blob for M4, eMMC, SD and HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds.dtb	Device tree blob for M4, eMMC, SD and LVDS display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb	Device tree blob for M4, eMMC, SD and dual LVDS+DP display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb	Device tree blob for M4, eMMC, SD and dual LVDS+HDMI display configuration. WIFI disabled.
fsl-imx8mq-var-dart-m4-wifi-dp.dtb	Device tree blob for M4, eMMC, WIFI and DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb	Device tree blob for M4, eMMC, WIFI and HDMI display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds.dtb	Device tree blob for M4, eMMC, WIFI and LVDS display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb	Device tree blob for M4, eMMC, WIFI and dual LVDS+DP display configuration. SD card disabled.
fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb	Device tree blob for M4, eMMC, WIFI and dual LVDS+HDMI display configuration. SD card disabled.

DTB File Name	Description
imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display.
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb	DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display.

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW7
 0 : Boot from SD card
 1 : Boot from eMMC

DART-MX8M-MINI

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
fsl-imx8mm-var-dart.dtb	Device tree blob for DART-MX8M-MINI
fsl-imx8mm-var-som.dtb	Device tree blob for VAR-SOM-MX8M-MINI
fsl-imx8mm-var-som-rev10.dtb	Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
	Device tree blob for DART-MX8M-MINI
	Device tree blob for VAR-SOM-MX8M-MINI
	Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8mm-var-dart-customboard.dtb	Device tree blob for DART-MX8M-MINI on DT8MCustomBoard
imx8mm-var-dart-customboard-m4.dtb	Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard
imx8mm-var-som-symphony.dtb	Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-m4.dtb	Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-legacy.dtb	Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
imx8mm-var-som-symphony-legacy-m4.dtb	Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8mm-var-dart-dt8mcustomboard.dtb	Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V2.x
imx8mm-var-dart-dt8mcustomboard-m4.dtb	Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V2.x
imx8mm-var-dart-dt8mcustomboard-legacy.dtb	Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V1.x
imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb	Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V1.x
imx8mm-var-som-symphony.dtb	Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-m4.dtb	Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above
imx8mm-var-som-symphony-legacy.dtb	Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
imx8mm-var-som-symphony-legacy-m4.dtb	Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below

Device tree

Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-dart.dtb

Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/fsl-imx8mm-var-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/fsl-imx8mm-var-var-som-rev10.dtb

Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-dart.dtb

Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/imx8mm-var-som-rev10.dtb

Build only the device tree for DART-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-dart-customboard.dtb

Build only the device tree for VAR-SOM-MX8M-MINI:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-MINI Rev 1.0:
$ make -j4 freescale/imx8mm-var-som-rev10-symphony.dtb

Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard:
$ make -j4 freescale/imx8mm-var-dart-customboard.dtb

Build only the device tree for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard:
$ make -j4 freescale/imx8mm-var-dart-customboard-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy-m4.dtb

Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V2.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard.dtb

Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V2.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-m4.dtb

Build only the device tree for DART-MX8M-MINI on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy.dtb

Build only the device tree for DART-MX8M-MINI on with Cortex-M4 DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mm-var-som-symphony-m4.dtb

Build only the device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mm-var-som-symphony-legacy-m4.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW7
 0 : Boot from SD card
 1 : Boot from eMMC

VAR-SOM-MX8M-NANO

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mn-var-som.dtb	Device tree blob for SD, eMMC, WIFI and LVDS display configuration.

Build Results v2

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8mn-var-som.dtb	Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
Image.gz-fsl-imx8mn-var-som-rev10.dtb	Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0.
Image.gz-fsl-imx8mn-var-som-m7.dtb	Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration.
Image.gz-fsl-imx8mn-var-som-rev10-m7.dtb	Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration rev 1.0.

Build Results v3

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8mn-var-som.dtb	Device tree blob for SD, eMMC, WIFI and LVDS display configuration.
imx8mn-var-som.dtb	Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8mn-var-som-symphony.dtb	Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above
imx8mn-var-som-symphony-m7.dtb	Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4A and above
imx8mn-var-som-symphony-legacy.dtb	Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below
imx8mn-var-som-symphony-legacy-m7.dtb	Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4 and below

Device tree

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb

Device tree v2

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/fsl-imx8mn-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/fsl-imx8mn-var-som-rev10.dtb

Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7:
$ make -j4 freescale/fsl-imx8mn-var-som-m7.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0 with Cortex-M7:
$ make -j4 freescale/fsl-imx8mn-var-som-rev10-m7.dtb

Device tree v3

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/imx8mn-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/imx8mn-var-som-rev10.dtb

Device tree v4

Build only the device tree for VAR-SOM-MX8M-NANO:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-NANO rev 1.0:
$ make -j4 freescale/imx8mn-var-som-rev10-symphony.dtb

Device tree v5

Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mn-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board V1.4A and above:
$ make -j4 freescale/imx8mn-var-som-symphony-m7.dtb

Build only the device tree for VAR-SOM-MX8M-NANO on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mn-var-som-symphony-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-NANO with Cortex-M7 on Symphony-Board V1.4 and below:
$ make -j4 freescale/imx8mn-var-som-symphony-legacy-m7.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3
 0 : Boot from SD card
 1 : Boot from eMMC

DART-MX8M-PLUS

Build Results

Image Name	How to use
fsl-image-gui-.wic.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8mp-var-dart.dtb	Device tree blob for DART-MX8M-PLUS
imx8mp-var-som.dtb	Device tree blob for VAR-SOM-MX8M-PLUS
imx8mp-var-som-ov5640.dtb	Device tree blob for VAR-SOM-MX8M-PLUS with a 2nd OV5640 camera

Image Name	How to use
fsl-image-gui-.wic.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8mp-var-dart-dt8mcustomboard.dtb	Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V2.x
imx8mp-var-dart-dt8mcustomboard-legacy.dtb	Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V1.x
imx8mp-var-som-symphony.dtb	Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board
imx8mp-var-som-symphony-2nd-ov5640.dtb	Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera

Device tree

Build only the device tree for DART-MX8M-PLUS:
$ make -j4 freescale/imx8mp-var-dart.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS:
$ make -j4 freescale/imx8mp-var-som.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS with second OV5640 camera:
$ make -j4 freescale/imx8mp-var-som-ov5640.dtb

Build only the device tree for DART-MX8M-PLUS on DT8MCustomBoard V2.x:
$ make -j4 freescale/imx8mp-var-dart-dt8mcustomboard.dtb

Build only the device tree for DART-MX8M-PLUS on DT8MCustomBoard V1.x:
$ make -j4 freescale/imx8mp-var-dart-dt8mcustomboard-legacy.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS on Symphony-Board:
$ make -j4 freescale/imx8mp-var-som-symphony.dtb

Build only the device tree for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera:
$ make -j4 freescale/imx8mp-var-som-symphony-2nd-ov5640.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW7
 0 : Boot from SD card
 1 : Boot from eMMC

VAR-SOM-MX8X

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8qxp-var-som-wifi.dtb	DTB for WIFI configuration. SD card disabled.
Image.gz-fsl-imx8qxp-var-som-sd.dtb	DTB for SD card configuration. WIFI disabled.

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8qxp-var-som-wifi.dtb	DTB for WIFI configuration. SD card disabled.
Image.gz-fsl-imx8qxp-var-som-sd.dtb	DTB for SD card configuration. WIFI disabled.

Device tree

Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-wifi.dtb

Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/fsl-imx8qxp-var-som-sd.dtb

Build only the device tree for VAR-SOM-MX8X WIFI configuration:
$ make -j4 freescale/imx8qxp-var-som-symphony-wifi.dtb

Build only the device tree for VAR-SOM-MX8X SD configuration:
$ make -j4 freescale/imx8qxp-var-som-symphony-sd.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

DTB File Name	Description
fsl-imx8qxp-var-som-wifi.dtb	Device tree blob for WIFI configuration. SD card disabled.
fsl-imx8qxp-var-som-sd.dtb	Device tree blob for SD configuration. WIFI disabled.

DTB File Name	Description
imx8qxp-var-som-symphony-wifi.dtb	Device tree blob for WIFI configuration. SD card disabled.
imx8qxp-var-som-symphony-sd.dtb	Device tree blob for SD configuration. WIFI disabled.

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)

VAR-SOM-MX8

Build Results

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
Image.gz-fsl-imx8qm-var-som-dp.dtb	DTB file for VAR-SOM-MX8 with DP display
Image.gz-fsl-imx8qm-var-som-hdmi.dtb	DTB file for VAR-SOM-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-som-lvds.dtb	DTB file for VAR-SOM-MX8 with LVDS display
Image.gz-fsl-imx8qm-var-spear-dp.dtb	DTB file for SPEAR-MX8 with DP display
Image.gz-fsl-imx8qm-var-spear-hdmi.dtb	DTB file for SPEAR-MX8 with HDMI display
Image.gz-fsl-imx8qm-var-spear-lvds.dtb	DTB file for SPEAR-MX8 with LVDS display

Build Results v2

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8qm-var-som-dp.dtb	DTB file for VAR-SOM-MX8 with DP display
imx8qm-var-som-hdmi.dtb	DTB file for VAR-SOM-MX8 with HDMI display
imx8qm-var-som-lvds.dtb	DTB file for VAR-SOM-MX8 with LVDS display
imx8qm-var-spear-dp.dtb	DTB file for SPEAR-MX8 with DP display
imx8qm-var-spear-hdmi.dtb	DTB file for SPEAR-MX8 with HDMI display
imx8qm-var-spear-lvds.dtb	DTB file for SPEAR-MX8 with LVDS display

Build Results v3

Image Name	How to use
fsl-image-gui-.sdcard.gz	This image is for SD card boot. It can be flashed as-is on an SD card that can then be used to boot your system, according to the relevant startup-guide of your product (usually requires to press the boot select button, or toggle a DIP switch). For detailed information refer to the Create a bootable SD card section below.
fsl-image-gui-.tar.gz	Tarball with rootfs files. Can be used to create an NFS root file system on the host. See the Yocto Setup TFTP/NFS section for more info. Also used to create our extended SD card. See the Create a bootable SD card section below.
	Linux kernel image, same binary for SD card and eMMC.
	U-Boot built for SD card boot or eMMC boot.

File Name	Description
imx8qm-var-som-dp.dtb	DTB file for VAR-SOM-MX8 with DP display
imx8qm-var-som-hdmi.dtb	DTB file for VAR-SOM-MX8 with HDMI display
imx8qm-var-som-lvds.dtb	DTB file for VAR-SOM-MX8 with LVDS display
imx8qm-var-spear-dp.dtb	DTB file for SPEAR-MX8 with DP display
imx8qm-var-spear-hdmi.dtb	DTB file for SPEAR-MX8 with HDMI display
imx8qm-var-spear-lvds.dtb	DTB file for SPEAR-MX8 with LVDS display

Device tree

Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-som-hdmi.dtb

Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-som-db.dtb

Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/fsl-imx8qm-var-spear-db.dtb

Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/fsl-imx8qm-var-spear-hdmi.dtb

Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/fsl-imx8qm-var-spear-lvds.dtb

Device tree v2

Build device tree for VAR-SOM-MX8 with DP display:
$ make -j4 freescale/imx8qm-var-som-db.dtb

Build device tree for VAR-SOM-MX8 with HDMI display:
$ make -j4 freescale/imx8qm-var-som-hdmi.dtb

Build device tree for VAR-SOM-MX8 with LVDS display:
$ make -j4 freescale/imx8qm-var-som-db.dtb

Build device tree for SPEAR-MX8 with DP display:
$ make -j4 freescale/imx8qm-var-spear-db.dtb

Build device tree for SPEAR-MX8 with HDMI display:
$ make -j4 freescale/imx8qm-var-spear-hdmi.dtb

Build device tree for SPEAR-MX8 with LVDS display:
$ make -j4 freescale/imx8qm-var-spear-lvds.dtb

SD card image file tree

/opt/images/
└── Yocto
    ├── imx-boot-sd.bin
    └── rootfs.tar.gz

DTB files table

DTB File Name	Description
fsl-imx8qm-var-som-dp.dtb	Device tree blob for VAR-SOM-MX8 with DP display
fsl-imx8qm-var-som-hdmi.dtb	Device tree blob for VAR-SOM-MX8 with HDMI display
fsl-imx8qm-var-som-lvds.dtb	Device tree blob for VAR-SOM-MX8 with LVDS display
fsl-imx8qm-var-spear-dp.dtb	Device tree blob for SPEAR-MX8 with DP display
fsl-imx8qm-var-spear-hdmi.dtb	Device tree blob for SPEAR-MX8 with HDMI display
fsl-imx8qm-var-spear-lvds.dtb	Device tree blob for SPEAR-MX8 with LVDS display

DTB files table v2

DTB File Name	Description
imx8qm-var-som-dp.dtb	Device tree blob for VAR-SOM-MX8 with DP display
imx8qm-var-som-hdmi.dtb	Device tree blob for VAR-SOM-MX8 with HDMI display
imx8qm-var-som-lvds.dtb	Device tree blob for VAR-SOM-MX8 with LVDS display
imx8qm-var-spear-dp.dtb	Device tree blob for SPEAR-MX8 with DP display
imx8qm-var-spear-hdmi.dtb	Device tree blob for SPEAR-MX8 with HDMI display
imx8qm-var-spear-lvds.dtb	Device tree blob for SPEAR-MX8 with LVDS display

Setting the Boot Mode

Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.

SW3 on VAR-SOM-MX8, SW6 on SPEAR-MX8
 0 : Boot from SD card
 1 : Boot from eMMC (Internal)

Release Notes

Based on release	Yocto: Poky , BSP: NXP, Linux: [ ]
Nature of release	Variscite Release
Release tag	[/tree/ ]
Date
Supported platforms
SOM revision
Carrier board revision
Variscite BSP git	[/tree/ ]
Variscite BSP branch	[/tree/ ]
Variscite BSP commit ID	[/commit/ ]
Kernel git	[/tree/ ]
Kernel branch	[/tree/ ]
Kernel commit ID	[/commit/ ]
U-Boot git	[/tree/ ]
U-Boot branch	[/tree/ ]
U-Boot commit ID	[/commit/ ]
File System build system	Yocto
Recovery SD card link	[/ ]